JVC SP-SQ4BT Manuel utilisateur

Catégorie
Hauts-parleurs portatifs
Taper
Manuel utilisateur
Product: SP-SQ4BT
Catagory: Bluetooth Audio Product
Notice:
Please read user manual carefully and keep it for your records.
1-Bluetooth speaker
1-Charging cable
Never disassemble the Bluetooth Speaker in an attempt to make any
repairs as this could result in electrical shock, burns or product failure
Use extra caution in high temperatures
• The speakers water resistance grade is rated IPX7
Do not expose the device to direct heat or ame
Product is not covered under warranty when the product has metal rust,
surface spoiling and any other natural oxidation
Damage, shock, and/or injury can occur if these warnings are not heeded
Device may become warm while charging
Make sure to always turn both the product and power outlet o
completely before unplugging the speaker
Make sure the product has plenty of ventilation
Do not press the buttons too hard as it could damage the product
Only use dry cloth to keep product clean from dust
Do not use chemicals on this product
Bluetooth Version: 5.0
Housing: ABS + mesh
Speaker: 4Ω5W*2
Battery: 2500mAh
Function: Bluetooth, AUX, calling, TWS
BT working distance: 10m
IPX7 water resistant
Operational Temperature : -10 - 40 Never try to repair this product yourself, take if to a certied technician.
• Trying to remove panels or repairing the unit yourself could lead to electric
shock. When the unit is not in use, make sure it is correctly turned o and
stored in a cool dry place
Do not insert foreign objects into the product
Avoid dropping the product, as harsh impacts could damage the product.
Package includes:
Safety Instructions:
Specications:
Connect to the charging port located underthe silicon cover of
the speaker. Connect the larger end of the cable to your computer's
USB port or an AC adaptor (not included)
• The LED indicator will turn red while charging, and goes o when fully
charged
Charging:
1. Place speaker within 30 feet of the Bluetooth enabled device
2. Press and hold the ON/OFF button. The white LED will ash rapidly to
indicate that the speaker is in Bluetooth pairing mode; You will hear the
prompt voice "The bluetooth device is ready to pair"
- The speaker will power o automatically if not connected in ve minutes
after being powered on.
- Low battery alert will occur when battery voltage is lower than 3.3V, you
will hear the "ding" voice prompt
Power On/O and Pairing:
Note:
3. On your Bluetooth enabled smartphone, tablet or media player, navigate
to the Bluetooth setting menu, turn on the Bluetooth feature, and search
for new devices
4. Search for "JVC SP-SQ4BT" on the pairing device. Type Password "0000"
or "1234" if requested
5. You will hear the prompt voice " The bluetooth device is connected
successfully", the white indicator is instantly on when connected. You can
start playing the music on your devices now. White indicator is o during
playing for bluetooth mode. White indicator ashes slowly during playing
for aux mode.
The speaker will be automatically reconnected to the last paired Bluetooth
device when powered on again.
- Play/ Pause: short press the "M" button
- Disconnect the bluetooth device: long press the "M" button
- Answer / End the call: short press the power button
- Reject the call: double click the power button
- Volume increase/ Decrease: short press the+/- button
- Next/ Last track: long press the+/- button
- TWS: double click the power button
Note:
Above operations can be processed on bluetooth devices synchronously
Note:
Basic Operations:
SP-SQ4BT
Bluetooth Speaker
website : us.jvc.com
For CANADA:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d' en compromettre le fonctionnement.
For USA :
compliance could void the user's authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
-
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help
This transmitter must not be co-located or operated in
conjuction with any other antenna or transmitter.
FCC CAUTION
FCC ID: 2A3ZO-SPSQ4BT IC: 28469-SPSQ4BT
PRODUCT REGISTRATION FOR THE CUSTOMER IN CANADA
EN : https://myjvckenwood.ca
FR : https://myjvckenwood.ca/fr
Support
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
(Cet appareil numérique de la Classe B conforme à la norme NMB-003
du Canada)
  • Page 1 1

JVC SP-SQ4BT Manuel utilisateur

Catégorie
Hauts-parleurs portatifs
Taper
Manuel utilisateur

dans d''autres langues