AgfaPhoto DC8200 Manuel utilisateur

USER MANUAL

MANUEL

D’UTILISATION

BENUTZERHANDBUCH

.

Handleidingen in verschillende talen te downloaden op

.

Manuales en diferentes idiomas que se pueden

descargar en

.

Manuali in diverse lingue scaricabili su

.

Manuais em diferentes idiomas para download em

.

. w

.

Manualer på olika språk nedladdningsbara på

.

Eri kielten käsikirjat, ladattavissa

.

Manualer på forskjellige språk som kan lastes ned på

DC8200

www.support.agfaphoto-gtc.com

Introducn

Thanks for purchasing this digital camera, it can not only shoot high-quality photos and videos but also can be used as removable

disk. Everything you need to take quality photos is included with your camera, please read this manual carefully before use.

Key features

•

Digital video resoluons – 1080 (30fps), 720 (30fps), VGA (30fps)

•

18-megapixel camera with choice of 12 digital resoluons - (18M) 4896x3672, (16M) 4608x3456, (14M) 4288x3216, (12M)

4000x3000, (10M) 3648x2736, (8M) 3264x2448, (7M HD) 3648x2056, (5M) 2592x1944, (3M) 2048x1536, (2M HD) 1920x1080,

(VGA) 640x480

•

2.7" TFT LCD

•

8X opcal zoom

•

8X digital zoom

•

(AS) An-Shake

•

Macro

•

Connue shot

•

Self-timer

•

Support up to 32 GB SD memory card (cered SD card brand)

•

Built-in flash

Content of the box:

•

Digital camera

•

USB cable

•

User manual

•

Lithium baery

•

Strap

•

Camera bag

•

16 GB SD card

EN

Computer system requirements for Windows XP

If you want to transfer photos and videos to a Windows 7/XP computer, the computer must be set up as follows:

•

Penum III processor compable with Windows XP or higher

•

128 MB RAM with at least 150 MB of available disk space

•

Available USB interface

•

Recommended screen resoluon: 1024 x 768 pixels or more

•

16-bit color or higher display adapter

Computer system requirements for Windows Vista/7

If you want to transfer photos and videos to a Windows Vista/7 computer, the computer must be set up as follows:

•

Windows Vista/7 processor

•

800 MHz processor and 512 MB RAM

•

20 GB hard disk with at least 15 GB of available space

•

Support for Super VGA graphics

•

Available USB interface

Computer system requirements for Macintosh

If you want to transfer photos and videos to a Macintosh computer, the computer must be set up as follows:

•

Macintosh G3 500 MHz processor or higher

•

Mac OS X or 10.5.X version or earlier versions

•

128 MB or more available system RAM (256 MB recommended) with at least 150 MB of available disk space

•

800 x 600 pixels or higher-resoluon screen displaying millions of colors

Digital camera overview

Prepare your camera for use

Lithium baery installaon

First install the lithium baery supplied with the camera according to the following instrucons so that it can operate.

1. Slide the baery cover below the camera to open the baery compartment:

2. Insert the lithium baery in the correct polarity direcon.

3. Then close the baery cover and slide it to lock it in place.

4. Once the camera is on, a baery icon will show up at the boom right of the LCD screen.

Full baery power Medium baery power Low baery power

Note:

-A "low baery" warning will show up on the screen when the baery charge is insucient. Shortly thereaer your camera

will power o.

-Please remove the baery if you are not going to use the camera for a while in order to extend its life e.

Lithium baery charging

To recharge the lithium baery, simply connect the camera (without removing the baery) to your computer using the USB

cable provided in the box. The red LED on the back of the camera will light up to indicate that the baery is being charged, and

will turn o when fully charged. You can also charge the lithium baery by connecng the camera to AC power if you have an

adapter to which you can connect the USB cable.

SD memory card installaon

This camera supports SD memory card up to 32 GB. It is necessary to insert a SD card into the camera before using it to extend

its storage capacity. To remove the card, simply press it rmly and the card will eject itself from the slot.

Please refer to the below diagram for correct installaon:

1. Slide the baery cover below the camera to open the baery compartment and access the memory card slot.

2. Insert the memory card by gently sliding it in the correct polarity direcon and un it clicks (the card top should be ushed

with the baery one).

3. An SD icon shows up then on the LCD screen when you turn the camera on indicang you that the card has been well

installed and all es will be stored on it.

4. Then close the baery cover and slide it to lock it in place.

5. Make sure that the card is not locked, otherwise photos and videos you took will not be saved.

Note:

- The internal memory can only store a few photos for test purposes. It is recommended to download them on a computer

if you want to keep it, otherwise they could be lost when the camera automacally shuts down because its charge is low or

when you remove away the baery.

- If there is a photo stored in the internal memory when you insert a card into your camera, a “Copy to card” message will

show up on the LCD screen with “Yes” or “No” opons. By selecng “Yes”, the photo will be then copied to the card.

- Formang will delete all data stored on the memory card including those which are protected.

- Do not remove the SD card during formang as this may damage the card and render it unusable.

- When memory is full, download the es from the SD card to your PC or directly delete some photos and videos to free up

storage space.

How to correctly hold your camera while taking pictures

First press the Power buon to turn on the camera and acvate the auto-focus zoom lens for it to open out like a periscope.

Then steadily hold the camera avoiding pung your ngers in front of the lens or the ash as shown on the diagram below.

Note: Do not touch or block the lens when it opens as it may damage the camera.

Start with your digital camera

Power on

Press once the Power buon on the top of the camera to turn it on. Then the LCD screen will light up and the auto-focus zoom

lens will open out indicang that your camera is on and ready for use.

Power o

Press once the Power buon on the top of the camera to turn it o while it is on . When the baery power is insucient, the

camera will display a red icon on the LCD screen and automacally turn o aer a few seconds.

Mode switching

The digital camera supports 3 modes:

- Photo mode: this mode is for you to take sll photos and adjust photo shoong sengs.

- Video mode: this mode is for you to record videos and adjust video shoong sengs.

- Playback mode: this mode is not only for you to preview photos or videos store on the memory card but also delete, protect

and rotate your photos.

In order to select a mode, please follow the below steps:

1. Press the MODE buon to toggle between the 3 modes.

2. In photo mode, the icon will show up at the top le of the LCD screen. In video mode, the icon will show up at

the same place and in playback mode, this will be the icon.

Photo mode

By default, the photo mode shows up rst on powering on the camera.

Taking photos

1. Hold the camera steady and posion your shot according to the image displayed on the screen.

2. Slightly press the Shuer buon and wait for the camera to focus the object.

3. Place your object in the white frame showing up on the LCD screen.

4. When the frame turns green, press the Shuer buon harder to capture the image. It takes then a few seconds to record

the photo on the memory card.

Note:

- Aer each photo shot, the number displayed on the top right of the LCD screen indicates how many more photos you can

sll take based on the current sengs and the size of the memory card inserted in the camera.

- When the camera memory is full, the LCD screen will display “Memory full” if you press Shuer buon to take photos. To

connue photo shoong, you need to transfer all es of the memory card on your computer (as described below in the

secon “Download photos and videos to your PC”) or delete them to get more memory. Alternavely, you can insert a new

empty SD memory card.

- This camera needs a SD card up to 32 GB to operate normally.

Digital zoom

You can enlarge the object up to 8 es with the digital zoom by pressing (T) buon to zoom in the object and press the (W)

buon to zoom out it. The icon will show up right on the LCD screen.

Note: When using this funcon, the camera will automacally adjust the lens so do not touch the lens while the camera is

focusing.

Shortcut buons on the MENU dial

The camera has 4 shortcut buons on the MENU dial made for quick access to the following sengs: Flash (up buon), Scene

(Le buon), Self-er (Down buon) and Delete (Right buon). By pressing one of these buons, you can directly access the

seng opons of the corresponding funcon.

Flash

In low light condions it is beer to use the built-in ash. You can also use the ash to compensate for backlight condions.

To set the ash:

- Automac ash: press the Flash buon repeatedly unl reaching the icon. The ash should set o automacally when

the shoong brightness is low.

- Forced ash: press the Flash buon repeatedly unl reaching the icon. The ash will remain acve unl you turn it o. If

the ash is not ready, the green LED beside the LCD screen will light up and the icon will blink; you have to wait for the

ash to charge.

- Red-eye reducon: press Flash buon repeatedly unl reaching the icon to acvate the red eye reducon.

- Flash o: press Flash buon repeatedly unl reaching the icon to turn the ash o.

Note: A “Low baery” warning will show up on the LCD screen if the baery is too low to allow the ash to set o.

Scene

Your camera supplies scenes for you to take photos in any environment: Auto / Scenery / Backlight / Night Portrait / Night

Scenery / Building / Kids / Food / Text / Snow / Fireworks / Sunset. Choose the scene in accordance with the light and

environmental condions prevailing at the photo shoong e.

1.

Press Scene buon (or Le buon) to enter the Scene menu.

2.

Press Up / Down buons to select an opon: Auto / Scenery / Backlight / Night Portrait / Night Scenery / Building / Kids /

Food / Text / Snow / Fireworks / Sunset.

3.

Press MENU buon to conrm your choice and return to photo mode.

4.

The icon corresponding to your scene choice will then show up at the top le of the LCD screen.

Delete

You can delete the last e you just captured by pressing this buon.

1.

Press Delete buon (or Right buon).

2.

The message "Delete this le" with "Yes" or "No" opon will then show up on the LCD screen at the boom of the lat est

captured e.

3.

Press Le / Right buon to choose between “Yes” or “No” and delete the e or cancel the deleon.

4.

Press MENU buon to conrm.

5.

If you chose “Yes”, the Delete menu opons will move to the next le of the playback mode. Just press MODE buon to

return to photo mode.

6.

If you chose “No”, you will automacally return to photo mode.

Self-mer

You can include yourself in a photo by turning on this funcon to delay the me between you are pressing the Shuer buon

and when the photo is actually taken. Ideal for group shots, we recommend you to use a tripod or to place the camera on a

stable surface if you want to use the self-mer.

1.

Press Self-mer buon (or Down buon) to enter the Self-mer menu.

2.

Press Up / Down buons to select an opon: O / 2 sec. / 5 sec. / 10 sec. / Double.

3.

Press MENU buon to conrm your choice and return to photo mode.

4.

The icon corresponding to your self-mer choice will then show up at the top of the LCD screen.

5.

The indicator light on the front of the camera will blink un the countdown e you chose has elapsed.

Sengs menu of the photo mode

To access the photo mode sengs menu and adjust your photo shoong, press the MENU buon once and follow the

instrucons below.

Image size

The image size and quality sengs determine the number of photos that can be saved and the memory required for each photo.

The higher the quality of the photo, the more memory it will take. The image size and quality will also aect the maximum size

to which you can print your photo.

To set the image size:

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Image Size in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: (18M) 4896x3672, (16) 4608x3456, (14M) 4288x3216, (12M) 4000x3000,

(10M) 3648x2736, (8M) 3264x2448, (7M HD) 3648x2056, (5M) 2592x1944, (3M) 2048x1536, (2M HD) 1920x1080, (VGA)

640x480.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The icon corresponding to your image size choice will then shows up at the top of the LCD screen.

Note: The camera has two high denion image sizes of 2M and 7M.

Self-mer

You can include yourself in a photo by turning on this funcon to delay the me between you are pressing the Shuer buon

and when the photo is actually taken. Ideal for group shots, we recommend you to use a tripod or to place the camera on a

stable surface if you want to use the self-mer.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Self Timer in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: O / 2 sec. / 5 sec. / 10 sec. / Double.

6.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

4.

The icon corresponding to your self-mer choice will then shows up at the top of the LCD screen.

5.

The indicator light on the front of the camera will blink un the countdown e you chose has elapsed.

Burst

This funcon allows you to take up to 5 pictures connuously aer only pressing Shuer buon once .

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Burst in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to choose between: On / O.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The corresponding icon will then show up at the top of the LCD screen indicang that the funcon is on.

Image quality

The quality of your photos also aects the number of photos you can take. The higher the quality is, the less you will be able to

take photos, but they will be of beer quality.

Note: The default quality value is “Fine”.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Image Quality in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Super Fine / Fine / Normal.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The icon corresponding to your image quality choice will then show up at the top of the LCD screen.

Date/Time stamp

This funcon allows you to enable or disable the display of the system date and e on your photos.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Date Stamp in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: O / Date / Date & Time.

4.

By choosing “O”, there will be no date on photos.

5.

By choosing “Date”, the date will be displayed on each photo once taken.

6.

By choosing “Date & Time”, both date and me will be displayed on each photo taken.

White balance

This seng allows the camera to adjust the color of your photos according to the color of the light source.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select White Balance in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Auto / Daylight / Cloudy / Tungsten / Fluorescent H / Fluorescent L.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The icon corresponding to your white balance choice will then show up at the boom le of the LCD screen.

ISO

This funcon allows you to compensate bad light condions when ash and tripod using are not possible. Choosing the lower

ISO value helps prevent spots appearing on your photo.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select ISO in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Auto / 50 / 100 / 200 / 400 / 800 / 1600.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Exposure

This seng allows you to control the brightness of your photos.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Exposure in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an exposure value from -2 to +2.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The icon corresponding to your exposure choice will then be displayed at the boom le of the LCD screen.

Sharpness

This seng allows you to adjust the sharpness of your images, making edges more or less disnct.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Image Sharpness in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Sharp / Normal / So.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Metering

This seng allows you to adjust the metering point.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Metering in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Center / Mul / Spot.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Macro

This seng allows you to adjust the photo shoong of a more or less distant (10cm 25cm) object by focusing the right

hyperfocal distance.

Note: The camera is by default in Far shoong mode.

1.

Press MENU buon to enter the sengs menu of the photo mode.

2.

Press Up / Down buons to select Macro in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to choose between: On (= Macro shoong ) / O (= Far shoong ).

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

General setup of the camera

The camera setup menu can be accessed in all modes by pressing MENU buon once and then pressing R ight buon, and is

mainly used to modify certain sengs specic to the camera operaon.

Beep sound

This seng allows you to switch the sound of the camera buons on or o.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Beep in the setup menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to choose between: On / O.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Frequency

This seng allows you to reduce ckering and avoid strips eect when photo shoong.

Note: the default frequency seng is 60Hz.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Frequency in the setup menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: 50Hz / 60Hz.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Auto power o

This seng allows you to program the automac camera shutdown if you do not use anymore for a while to save baery charge.

Note: The default auto power o seng is 1 minute.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Auto Power O in the setup menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: O / 1 Minute / 3 Minutes / 5 Minutes.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Note: if you choose “O”, the camera will not switch o un the baery is completely discharged or it is manually turned o.

Date/Time seng

This seng allows you to set system date and e that will be displayed on the photos if you turn Date/Time stamp funcon

on.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Date/Time in the setup menu and then MENU buon to enter the submenu.

3.

Press Le / Right buons to select successively the year, month, day, e and the date layout.

4.

Press Up / Down buons to set the highlighted data.

5.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

Language

The camera supports many languages.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Language in the setup menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select your language.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The camera soware then automacally switches to the chosen language.

Format

This funcon allows you to format the memory card and erase all es stored on it including protected ones.

Note: Please use this funcon with cauon. Once the memory card is formaed, all es stored on it will be permanently deleted.

As this procedure is irreversible, it is highly recommended to transfer all photo, videos or other important es to a computer

before formang.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Format Memory Card in the setup menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to choose between: Yes / No.

4.

Press MENU buon to conrm your choice.

5.

“Please wait” then shows up on the LCD screen if you launched a formang. Once it is nished, “Completed” suddenly

shows up and the camera automacally comes back to photo mode.

Default seng

This seng allows you to reset your camera sengs back to the factory defaults values.

1.

Press MENU buon and then Right buon to enter the setup menu of the camera.

2.

Press Up / Down buons to select Default Seng in the setup menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to choose between: Yes / No.

4.

Press MENU buon to conrm your choice.

5.

Once the system reset is done, “Completed” suddenly shows up on the LCD screen and the camera automacally comes

back to photo mode.

Video mode

Note: The camera has limited internal memory and does not allow video recording without a SD card (up to 32 GB) inserted.

1.

Press MODE buon twice to select the video mode.

2.

The video icon will show up at the top le of the LCD screen and the elapsed recording me in the upper right

corner.

3.

Press Shuer buon to start recording.

4.

A ashing red dot and a red chronometer will show up at the top right of the LCD screen to indicate that the video

recording is in progress.

5.

Press again Shuer buon to stop recording and save the video e in AVI format.

Note:

- The camera also has a microphone to record the surrounding sound of each video and speaker to reproduce it when you

view this video in playback mode.

- You can play all AVI le you shot with the playback mode or to your computer with QuickTime player or Windows Media

Player.

- When the camera's memory is full, the “Card Full” message will show up on the LCD screen when you aempt shoot more

videos. Transfer all les stored on SD memory card to your PC or delete them to shoot more videos. Alternavely, you can

insert a new SD memory card to expand the memory and record longer videos.

In video mode, there are only two sengs to setup: video size and with balance.

Video size

The camera has only three video resoluons. The larger the image size, the sharper and larger the video, so it will take up more

space on the memory card.

1.

Press MENU buon to enter the sengs menu of the video mode.

2.

Press Up / Down buons to select Image Size in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: 1080 (30fps), 720 (30fps), VGA (30fps).

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The icon corresponding to your image size choice will then shows up at the top of the LCD screen.

White balance

This seng allows the camera to adjust the color of your video according to the color of the light source.

1.

Press MENU buon to enter the sengs menu of the video mode.

2.

Press Up / Down buons to select White Balance in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Auto / Daylight / Cloudy / Tungsten / Fluorescent H / Fluorescent L.

4.

Press MENU buon to conrm your choice and then MODE buon to return to photo mode.

5.

The icon corresponding to your white balance choice will then be displayed at the boom le of the LCD screen.

Playback mode

With the playback mode, you cannot only view the photos and videos stored on the memory card in full screen or thumbnail but

also protect, delete, and rotate them. To switch on it, press the MODE buon three es and the icon will show up on the

upper le corner of the LCD screen to indicate that the playback mode is well acvated.

Note: “No Exisng File” will show up on the LCD screen if there are no photos/videos in the camera.

From full screen to thumbnail display

In playback mode, you can display all photo and video es stored on the memory card in thumbnails.

1.

Press (W) / Zoom out buon to enter the thumbnail display.

2.

Press Up / Down / Le / Right buons to select the thumbnail of a photo or video (these are marked with a the icon

to dierenate them).

3.

Press MENU buon to display the selected e in full screen.

Zoom in on a photo

This handling allows you to view more precisely the details of a photo.

1.

Press Le / Right buons to select a photo.

2.

Press (T) buon to zoom in on the photo.

3.

Press Up / Down / Le / Right buons to move around on the photo.

4.

Press (W) buon to zoom out unl the photo is displayed in full screen again.

Sengs menu of the playback mode

To access the playback mode sengs menu to either protect, delete or rotate photos, press the MENU buon once and follow

the instrucons below.

Protect

This funcon allows you to protect your photos/videos from accidental deleon.

1.

Press MENU buon to enter the sengs menu of the playback mode.

2.

Press Up / Down buons to select Protect in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Single / Lock All Images / Unlock All Images.

4.

Press MENU buon to conrm your choice.

5.

A protecon conrmaon message will then show up with “Yes” or “No” opons.

6.

Press Up / Down buons to make a choice and then MENU buon to denitely conrm your intenon.

7.

The camera will automacally exit the playback mode sengs menu and return to les display.

Note: If you chose to protect one or many es, a lock icon will show up on each e at the top le of the LCD screen.

Delete

You can delete unwanted photos and videos to free up more memory. You can do this le by e or delete all unprotected

photos and videos stored on the memory card.

1.

Press MENU buon to enter the sengs menu of the playback mode.

2.

Press Up / Down buons to select Delete in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to select an opon: Single / All.

4.

Press MENU buon to conrm your choice.

5.

A deleon conrmaon message will then show up with “Yes” or “No” opons.

6.

Press Up / Down buons to make a choice and then MENU buon to denitely conrm your intenon.

Note:

- Locked es cannot be deleted.

- This procedure is irreversible, so all unprotected es will be denively lost once you conrm the total deleon of es

stored on the memory card.

Rotate

This funcon allows you to rotate photos.

1.

Press MENU buon to enter the sengs menu of the playback mode.

2.

Press Up / Down buons to select Rotate in the sengs menu and then MENU buon to enter the submenu.

3.

Press Up / Down buons to rst select the “Rotate” opon.

4.

Press MENU buon unl the photo has reached the desired orientaon.

5.

Press Down buon to move to “Save” opon and then MENU buon to conrm the rotaon saving.

6.

The camera will automacally exit the playback mode sengs menu and return to les display.

Note: Protected es cannot be rotated.

AVI video es playing

1.

In playback mode, press Le / Right buons to select the AVI video e you want to playback. Alternavely, press (W)

buon to enter thumbnail display and select a video by pressing Le / Right buons. Then press MENU buon to display

the selected video le in full screen.

2.

Press Up buon to play the video file and press it again to pause.

3.

Press Down buon to stop video e playing.

Note: To protect and delete videos, follow the same procedures as explained above for photos.

Download photos or video es to your PC

First, connect your camera to the computer via a USB cable that can read data and then turn it on:

“MSDC” will show up on the camera LCD screen while a window (Removable Disk (H:)) will show up on your PC.

Now you can copy es to your computer in two ways:

1.

Download photos directly from the windows.

2.

Choose “Copy pictures to a folder on my computer” on the Removable Disk (H:). Aer you have clicked

“OK”, there will be some windows on the screen for you to complete the copying step by step. You only need to select the

default sengs to complete the transferring.

Or you can:

1.

Click on the computer icon on the desktop.

2.

Your memory card will show up as a removable storage device.

3.

Click on it to view all les stored in the subfolder DCIM.

4.

Then you can simply copy and paste es you want on your computer.

Appendix A: technical specicaons

Image sensor

CMOS Sensor

Image resoluon

(18M) 4896x3672, (16M) 4608x3456, (14M) 4288x3216, (12M) 4000x3000, (10M)

3648x2736, (9M) 3264x2448, (7M HD) 3648x2056, (5M) 2592x1944, (3M) 2048x1536,

(2M HD) 1920x1080, (VGA) 640x480

Video resoluon

1080P (30fps), 720P (30fps), VGA (30fps)

File Format JPEG (photo)/AVI (video)

External memory SD card up to 32 GB

LCD display

2.7” TFT LCD

Lens Opcal zoom lens

Zoom

8X opcal zoom, 8X digital zoom

Exposure

-2.0EV +2.0EV

White balance

Automac/Daylight/Cloudy/Tungsten/Fluorescent H/Fluorescent L

ISO Auto/100/200/400/800/1600

Scene

Auto/Scenery/Backlight/Night Portrait/Night Scenery/Building/Kids/Food/

Text/Snow/Fireworks/Sunset

Flash

Auto/Manual/Red-eye reducon/O

Self-mer

O/2s/5s/10s

Interface USB 2.0

System requirements Windows XP/VISTA/7/MAC

Bary Lithium baery

Working temperature 0-40°C

La page charge ...

AgfaPhoto DC8200 Manuel utilisateur

AgfaPhoto DC8200 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents