Whirlpool WFW9620HW Mode d'emploi

Use and Care Guide

Guide d’utilisation et d’entretien

Para obtener acceso al

Manual de uso y

cuidado en español, o para

obtener información adicional

acerca de su producto, visite:

www.whirlpool.com

Front-Loading Automatic Washer

Laveuse automatique à chargement frontal

If you have any problems or questions, visit us at www.whirlpool.com

Pour tout problème ou toute question, consulter www.whirlpool.ca

W11201742A

W11201743A – SP

Designed to use only HE

High Efciency detergents.

Conçue pour l’utilisation

d’un détergent haute

efcacité seulement.

Connect your Smart Washer with your mobile device

at www.whirlpool.com/connect (in Canada, www.whirlpool.ca/connect)

Connecter votre laveuse intelligente avec votre appareil mobile

à www.whirlpool.ca/connect)

2

WASHER SAFETY

Table of Contents

WASHER SAFETY ........................................................ 2

ACCESSORIES ............................................................. 4

OPERATING INSTRUCTIONS ..................................... 5

Control Panel and Features ................................... 5

Cycle Guide ........................................................... 6

Choosing the Right Detergent ................................9

Using the Dispensers ............................................ 10

Using Your Washer ...............................................11

Washer Maintenance ............................................17

INTERNET CONNECTIVITY GUIDE ...........................22

TROUBLESHOOTING .................................................23

CONNECTED APPLIANCE REGULATORY

NOTICES .....................................................................33

WARRANTY ................................................................. 35

ASSISTANCE OR SERVICE ........................ Back Cover

Table des matières

SÉCURITÉ DE LA LAVEUSE ........................................ 36

ACCESSOIRES .............................................................. 38

INSTRUCTIONS D’UTILISATION ................................. 39

Tableau de commande et caractéristiques ............. 39

Guide de programmes ............................................ 40

Choix du détergent approprié .................................. 45

Utilisation des distributeurs ...................................... 46

Utilisation de la laveuse............................................ 47

Entretien de la laveuse ............................................. 54

GUIDE DE CONNEXION INTERNET ............................. 59

DÉPANNAGE .................................................................. 60

AVIS D’APPLICATION DE LA RÉGLEMENTATION

DE LA CONNEXION DES ÉLECTROMÉNAGERS ........ 70

GARANTIE ...................................................................... 72

ASSISTANCE OU SERVICE ................ Couverture arrière

3

4

ACCESSORIES

INSTALLATION & MAINTENANCE

ACCESSORIES

FACTORY CERTIFIED PARTS – these three

words represent quality parts and accessories

designed specically for your appliance.

Time tested engineering that meets

our strict quality specications.

FACTORY CERTIFIED PARTS

Accessories designed for your appliance:

Customize your new washer with the following genuine Whirlpool

accessories. For more information on options and ordering,

call 1-866-698-2538 or visit us at: www.whirlpoolparts.com.

In Canada, call 1-800-688-2002 or visit us at www.whirlpool.ca.

15" Pedestal

Color-matched pedestals

raise the washer to a more

comfortable working height.

The large drawer provides

convenient storage.

5

Control Panel and Features

POWER BUTTON

Touch to power up the washer.

HOME BUTTON

Touch this button and the LCD screen will show the

home screen, where you can select your cycle, settings,

and options.

FAVORITES BUTTON

Stores and accesses your favorite cycles and a history of

your recently run cycles.

LCD SCREEN

Use this screen to select cycle, settings, options, etc.

REMOTE ENABLE BUTTON

Download the Whirlpool™ app and follow the instructions to

connect your washer to your home Wi-Fi network. You may

also visit www.whirlpool.com/connect. In Canada, visit

www.whirlpool.ca/connect. After connecting to WiFi, touch

the REMOTE ENABLE button any time you want to use the

app. Touching this button locks out the LCD screen and you

will be prompted with a message about the washer waiting

for input from the app. If you want to exit this mode, touch

the REMOTE ENABLE button again.

TOOLS BUTTON

Touch this button to access the tools screen. For more

information, see “Using Your Washer” Step 12.

START/PAUSE BUTTON

Touch and hold to start, or touch to pause a cycle. When

you start a cycle, the door will lock, the washer will sense

the load size, and the wash cycle will begin.

DISPENSERS

Load & Go

™

Bulk Dispenser

The Load & Go

™

dispenser gives you the convenience

of not having to add HE detergent and fabric softener to the

wash load every time. It also determines the best time and

amount to add the detergent to the load. See the “Using the

Dispensers” section for information on using the dispenser

drawer.

1

2

4

3

5

7

6

7

8

1 3

2

6

5

74

Temperature

WARM

Spin Speed

EXTRA FAST

Auto Dry

Dry

What to Wash

REGULAR

How to Wash

NORMAL

4:28

3:15

2-Liter Bulk Liquid High Efficiency (HE) detergent

dispenser

This bulk dispenser holds up to 67.6 oz (2 L) of liquid

HE detergent.

1-Liter Bulk Liquid High Efficiency (HE) detergent/

fabric softener dispenser

This bulk dispenser holds up to 33.8 oz (1 L) of liquid

HE detergent or liquid fabric softener.

Each dispenser holds enough detergent or fabric

softener for many loads of laundry. Each adds the

appropriate quantity to the wash load at the proper time.

See the “Using the Dispensers” section for information

on using the dispenser.

IMPORTANT: Do not use chlorine bleach or powdered

detergent in the bulk dispenser. Powdered detergent

and bleach must be added to the single load dispenser.

See the “Using the Washer” section.

Single-load dispenser drawer

The single-load dispenser drawer gives you the

convenience of adding HE detergent, liquid chlorine

bleach, and liquid fabric softener to the wash load at

the proper time. See the “Using the Dispensers” section

for information on using the dispenser drawer.

High Efficiency (HE) detergent compartment

This compartment holds liquid or powdered HE

detergent for your main wash cycle, and automatically

dispenses detergent in the cycle.

Liquid fabric softener compartment

This compartment holds liquid fabric softener. It

automatically dispenses liquid fabric softener at the

optimum time in the cycle.

Liquid chlorine bleach compartment

This compartment automatically dilutes and dispenses

liquid chlorine bleach at the optimum time during the

rst rinse after the wash cycle. It cannot dilute powdered

bleach.

A

B

C

D

E

D

E

C

OPERATING INSTRUCTIONS

NOTE: The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are

registered, touch the control panel with your ngertip, not your ngernail.

B

A

6

Cycle Guide

You can use this washer to wash only, dry only, or wash and dry. This washer has a unique user interface to help you select the best

wash cycle for your load. The “What to Wash/How to Wash” layout guides you to the optimal cycle in two easy steps:

First, determine what items are in the load that you are trying to wash. Use that to guide your “What to Wash” selection. Then

determine how you want the washer to wash them and select the appropriate “How to Wash” selection. Selecting “What to Wash” will

automatically select a default “How to Wash selection,” so selecting a “How to Wash” is optional. See chart below for more details.

Settings and options shown in bold are default settings for that wash cycle. For best fabric care, choose the cycle, options, and

settings that best t the load being washed. Always read and follow fabric care labels and laundry product instructions. Avoid tightly

packing the washer. The washer will not rinse well or spin correctly if tightly packed. Loading the drum half full or less will improve

drying performance and cycle time. Not all settings are available with each cycle, and some options cannot be used together.

What Items Do You Want to Wash?

“What to Wash”

Cycle Selection:

Cottons, linens, and mixed garment loads Regular

Bright- or dark-colored cottons, linens, and mixed loads Colors

White fabrics/garments Whites

Sturdy towels and washcloths Towels

No-iron fabrics, dress shirts/pants, synthetics, sheer/lacy garments Delicates

Large items such as small comforters, sleeping bags, jackets, and washable rugs Bulky Items

How Do You Want to Wash Them?

“How to Wash”

Cycle Selection:

Regular/normal Normal

Fast Quick

With fewer wrinkles Wrinkle Control

Intense cleaning Heavy Duty

Gentle cleaning with cold water Cold Wash

Eliminate 99.9% of three common household bacteria Sanitize*

What

How

Basic Options Additional Options

Temperature Spin Speed Drying

Options

Soil Level Pre-Soak Steam Clean Extra Rinse FanFresh

®

Regular Normal Cold

Cool

Warm

Hot

Extra Hot

Off

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Quick Cold

Cool

Warm

Hot

Extra Hot

Off

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Wrinkle

Control

Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Heavy Duty Cold

Cool

Warm

Hot

Extra Hot

Off

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Cold Wash Cold

Cool

Warm

Hot

Extra Hot

Off

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Sanitize Extra Hot Off

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Colors Normal Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

* This cycle eliminates 99.9% of the most common bacteria found in clothes, sheets, and towels. The extra hot wash temperature ensures sanitization.

Check recommended wash temperature of your items. Bacteria tested were K. pneumonia, P. aureginosa, and S. aureus.

7

What

How

Basic Options Additional Options

Temperature Spin Speed Drying

Options

Soil Level Pre-Soak Steam Clean Extra Rinse FanFresh

®

Colors (cont.) Quick Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Wrinkle

Control

Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Heavy Duty Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Cold Wash Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Sanitize Extra Hot Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Whites Normal Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Quick Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Wrinkle

Control

Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Heavy Duty Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Cold Wash Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Sanitize Extra Hot Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Towels Normal Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Quick Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Wrinkle

Control

Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Heavy Duty Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

8

What

How

Basic Options Additional Options

Temperature Spin Speed Drying

Options

Soil Level Pre-Soak Steam Clean Extra Rinse FanFresh

®

Towels

(cont.)

Cold Wash Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Sanitize Extra Hot Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Delicates Normal Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Quick Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Wrinkle

Control

Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Heavy Duty Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Cold Wash Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Sanitize Extra Hot Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Bulky Items Normal Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Quick Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Wrinkle

Control

Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Heavy Duty Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X X

Cold Wash Cold

Cool

Warm

Hot

Extra Hot

Off

Slow

Medium

Fast

Extra Fast

Auto Dry

Timed Dry

Light

Normal

Heavy

X X X

Government energy certications were based on the REGULAR (WHAT TO WASH), NORMAL (HOW TO WASH), DRYING MODE -

AUTO DRYING OFF, TIMED DRYING 6 HOURS, DRYING ONLY ON CYCLE - DRYING TEMPERATURE SETTING NON-SELECTABLE.

The as-shipped defaults of REGULAR (WHAT TO WASH), NORMAL (HOW TO WASH), WARM TEMP, SPIN SPEED EXTRA FAST,

DRYING MODE - AUTO DRYING OFF, TIMED DRYING OFF, DRYING ONLY OFF were not used for energy testing.

9

Choosing the Right Detergent

Use only High Efciency detergents. The package will be marked

“HE” or “High Efciency.” Low-water washing creates excessive

sudsing with a non-HE detergent. Using non-HE detergent

will likely result in longer cycle times and reduced rinsing

performance. It may also result in component malfunction and,

over time, buildup of mold or mildew. HE detergents should be

low-sudsing and quick-dispersing to produce the right amount

of suds for the best performance. They should hold soil in

suspension so it is not redeposited onto clean clothes. Not all

detergents labeled as High Efciency are identical in formulation

and their ability to reduce suds. For example, natural, organic,

or homemade HE detergents may generate a high level of suds.

Always follow the detergent manufacturer’s instructions to

determine the amount of detergent to use.

Use only High

Efciency (HE)

detergent.

About Detergent Concentration

Today’s liquid HE detergents are concentrated. Most brands of

concentrated HE detergent will show the level of concentration

on the bottle.

However, if the detergent bottle does not give the concentration,

it can be easily calculated. Just divide the package size in uid

ounces by the number of loads. Then refer to the chart below

to nd the concentration.

Set the concentration level setting on the washer by using

the Tools button (see Step 12 in “Using Your Washer). If you do

not get your desired cleaning results, set the concentration level

to a lower concentration number. If you have excess suds, set the

concentration level to a higher concentration number.

Concentration Number of ounces ÷ number of loads

2X 1.5–2.49 (44.4 mL–73.6 mL)

3X 0.9–1.49 (26.6 mL–44.1 mL)

4X 0.7–0.89 (20.7 mL–26.3 mL)

5X 0.5–0.69 (14.8 mL–20.4 mL)

6X 0.3–0.49 (8.9 mL–14.5 mL)

10

Using the Dispensers

1. For automatic dispensing, open the bulk dispenser drawer

using the handle at the base of the washer. For a single load,

open the single-load dispenser drawer at the top left corner

of the washer and disable the Load & Go™ option.

2. Add laundry products as described below.

3. Slowly close the dispenser drawer. Make sure it is

completely closed.

NOTES:

■

A small amount of water may remain in the single load

dispenser from the previous wash cycle. This is normal.

■

See “About Detergent Concentration” for information on

detergent concentration.

■

When detergent in the bulk dispenser is running low, the

display will show the detergent level (Low).

■

Add single-dose and Oxi-type boosters to the drum before

loading items. See the “Using Your Washer” section.

Adding HE detergent to dispenser

Powdered detergent:

Lift the selector to the high

position. Add directly to the

compartment.

Load & Go

™

bulk dispenser

Adding detergent for a single load

IMPORTANT:

■ Disable Load & Go™ dispenser(s) as desired (see Step

12 in “Using Your Washer”).

■ Do not add single-dose laundry packet to dispenser

drawer.

HE detergent

compartment

Use only High

Efciency (HE)

detergent.

Liquid detergent:

Push down the selector

to the low position. Add

directly to the compartment.

Use only High Efciency (HE)

liquid detergents. The bulk

dispensers will hold about 67.6 oz

(2 L) or 33.8 oz (1 L) of liquid HE

detergent, depending on dispenser,

or enough for many loads of laundry.

To Fill Bulk Dispeners:

Open the dispenser drawer by pulling on the handle at the

base of the washer. If desired, the bulk dispensers can be

completely removed from the drawer.

Locate the Load & Go

™

bulk

dispenser. Gently pull up on the

tab located on the bulk dispenser

lid to lift the ll door.

Fill to the “MAX” line (see

illustrations at right) with HE

liquid detergent or liquid fabric

softener (1-liter dispenser only).

Close ll door. It will click into place.

Make sure the concentration setting

is correct (see the “Choosing the

Right Detergent” section).

It is recommended that you rinse

out the Load & Go

™

containers when

relling, when changing detergent

types or concentrations, or when

the washer will not be used for an

extended period.

For instructions

on cleaning the dispenser cartridge,

see the “Washer Care” section.

For instructions on changing

detergent concentration, see

“Using Your Washer, Step 12.

Use only High Efciency

(HE) detergent.

Selector

Pour a measured amount of HE detergent into detergent

compartment. For powdered detergent, lift the selector

to the high position. For liquid detergent, push down the

selector to the low position.

Do not overll; adding too much detergent may cause

detergent to be dispensed into the washer too early.

Tab

“MAX” line

11

Single-dose laundry packets, Oxi-type boosters, color-safe

bleach, or scented crystals can be added to the drum prior

to adding laundry. When using single-dose laundry packets,

make sure that the bulk dispenser is disabled or off (see

Step 12).

NOTE: Always follow manufacturer’s instructions.

Using Your Washer

Sort items by recommended cycle, water temperature,

and colorfastness. Separate heavily soiled items from lightly

soiled. Separate delicate items from sturdy fabrics. Treat

stains promptly and check for colorfastness by testing stain

remover products on an inside seam.

IMPORTANT:

n Empty pockets. Loose change, buttons, or any small

object can plug pumps and may require a service call.

n Close zippers, fasten hooks, tie strings and sashes,

and remove non-washable trim and ornaments.

n Mend rips and tears to avoid further damage to items

during washing.

n Turn knits inside out to prevent pilling. Separate lint-takers

from lint-givers. Synthetics, knits, and corduroy fabrics will

pick up lint from towels, rugs, and chenille fabrics.

n Do not dry garments if stains remain after washing,

because heat can set stains into fabric.

n Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage

to your garments.

1. Sort and prepare your laundry

First wash cycle without laundry

Before washing clothes for the rst time, set up the Load & Go™

bulk dispenser or add detergent to the single-dose dispenser

(see the “Using the Dispensers” section). Choose the Regular

(what to wash) and Quick (how to wash) cycle and run it without

clothes. Use only HE detergent. This initial cycle serves to ensure

the interior is clean.

Place a load of sorted items loosely in the washer. Items need

to move freely for best cleaning and to reduce wrinkling and

tangling. If using the drying option, loading the drum half full

or less and not interrupting the drying cycle by opening the

door will improve drying performance and cycle time. Close

the washer door by pushing it rmly until the latch clicks.

n Push load fully into the washer. Make sure no items are

resting on the rubber seal to avoid trapping them between

the seal and the door window.

n Mix large and small items and avoid washing single items.

Load evenly.

n Wash small items in mesh garment bags. For multiple

items, use more than one bag and ll bags equally.

3. Load laundry into washer

2. Add laundry products, if desired

12

4. Add HE detergent

Liquid HE detergent

bulk dispenser

Adjust the selector, based on type of HE detergent used

(either liquid or powdered). Add a measured amount of

detergent directly into the detergent compartment. See

“Using the Dispensers” section. Disable the Load & Go™

dispenser(s).

Single load

powdered

HE detergent

Single load

liquid

HE detergent

Load & Go™ Bulk Dispenser

Single-Load Dispenser Drawer

If the bulk dispenser already contains enough detergent

to wash your load, ensure the Load & Go™ dispenser you

want to use is enabled as described in Step 12. If you need

to add detergent to the bulk dispenser, see the “Using the

Dispensers” section.

OR

NOTE: Do not add single-dose laundry packets, Oxi-type

boosters, color-safe bleach, or scented crystals to dispensers.

They will not dispense correctly.

Pour a measured amount of liquid fabric softener into liquid

fabric softener compartment. Always follow manufacturer’s

directions for correct amount of fabric softener, based on

your load size. Disable the 1-Liter Load & Go™ dispenser if

not used to dispense detergent.

Fabric softener is always dispensed in the last rinse, even

if Extra Rinse is selected.

IMPORTANT: Do not overll, dilute, or use more than

the manufacturer-recommended quantity of fabric softener.

Do not ll past the “MAX” line. Overlling dispenser will

cause fabric softener to immediately dispense into washer.

■ Do not spill or drip any fabric softener onto the clothes.

■ Do not use liquid fabric softener dispenser balls in this

washer. They will not dispense correctly.

■ Do not use fabric softener sheets.

5. Add liquid fabric softener, if desired

Liquid HE detergent/

fabric softener

bulk dispenser

Load & Go™ Bulk Dispenser

Single-Load Dispenser Drawer

If the bulk dispenser already contains enough fabric softener

for your load, ensure the 1-Liter Load & Go™ dispenser

is enabled as described in Step 12. If you need to add

fabric softener to the bulk dispenser, see the “Using the

Dispensers” section.

OR

13

9. Adjust temperature and spin speed,

if desired

†

To adjust temperature:

From the home screen, touch the “Temperature” area of

the screen to show the Temperature settings available for

the cycle/program chosen in Step 8. Touch the desired

setting and touch OKAY to conrm that setting.

The recommended wash temperature is preset for each cycle.

Some preset temperatures can be changed. You may select

a different wash temperature based on the level of soil and

type of fabric being washed. For best results, use the warmest

wash water safe for your fabric, following the garment label

instructions. All wash temperatures feature a cold rinse.

To adjust spin speed:

Touch the “Spin Speed” area of the screen to show the

Spin Speed settings available for the cycle/program chosen

in Step 8. Touch the desired setting and touch OKAY to

conrm that setting.

The recommended spin speed is preset for each cycle. Some

preset speeds can be changed.

■ Faster spin speeds mean shorter dry times, but may

increase wrinkling in your load.

■ Slower spin speeds reduce wrinkling, but will leave your

load more damp.

Temperature

WARM

Spin Speed

EXTRA FAST

Auto Dry

Dry

What to Wash

REGULAR

How to Wash

NORMAL

4:28

3:15

7. Touch POWER button to turn on

washer

8. Select wash program/cycle

From the home screen, touch the “What to Wash” area of the

screen to select the program that best matches the items you

want to wash. You may need to scroll down with your nger to

see all of the selections. Touch the desired program to return

to the home screen.

Touch the “How to Wash” area of the screen to select the

program that best matches the method that you would like

to wash those items. You may need to scroll down with your

nger to see all of the selections. Touch the desired program

to return to the home screen.

Touch until the indicators turn on.

Temperature

WARM

Spin Speed

EXTRA FAST

Auto Dry

Dry

What to Wash

REGULAR

How to Wash

NORMAL

4:28

3:15

Add liquid chlorine bleach to the bleach compartment.

Do not overll, dilute, or use more than 2⁄3 cup (165 mL).

Do not use color-safe bleach or Oxi in the same cycle with

liquid chlorine bleach.

IMPORTANT:

■ Always measure liquid chlorine bleach. Use a measuring

cup with a pour spout; do not guess.

■ Do not ll beyond the “MAX” level. Overlling could

cause garment damage.

■ Do not use thickened, easy-pour, or no-splash bleach

when running the Clean Washer with affresh

®

cycle as

excess suds may occur.

■ Do not add liquid chlorine bleach to the bulk dispenser.

■ Slowly close dispenser drawers. Make sure the drawers

are closed completely.

6. Add liquid chlorine bleach to

single-load dispenser, if desired

† Not all options and settings are available with all programs/cycles.

See “Cycle Guide” for available options and settings.

14

11. Select options, if desired

†

† Not all options and settings are available with all programs/cycles.

See “Cycle Guide” for available options and settings.

From the home screen, touch the Options icon (at upper right

of screen) and the Options screen will show Soil Level, Extra

Rinse, Pre-Soak, FanFresh

®

,

Steam Clean, and Wrinkle Shield

™

selections. Previously selected “What to Wash” and “How to

Wash” options will be shown on the screen. Touch the screen for

each option to change its setting.

Soil Level Option

The recommended soil level is preset for each cycle. The Soil

Level option allows you to select a Light, Normal, or Heavy soil

level setting. Some preset soil levels can be changed. For heavily

soiled and sturdy fabrics, select the Heavy soil level setting.

For lightly soiled and delicate fabrics, select the Light soil level

setting. Lower soil level settings will help reduce tangling and

wrinkling.

Extra Rinse Option

The Extra Rinse option provides an additional rinse to the

selected cycle.

Pre-Soak Option

The Pre-Soak option can be set for 30 min, 1 hr or 8 hrs.

FanFresh

®

Option

The FanFresh

®

option will periodically tumble the load after the

end of the cycle for up to 12 hours. Touch FAN FRESH to activate

this option. This option is not available when a drying mode

is selected. FanFresh

®

may be ended at any time by touching

the “X” on the touch screen to the right of the estimated time

remaining.

Steam Clean Option

The Steam Clean option adds additional soak and wash time

to many cycles to help remove tough stains, as well as a steam

boost for added cleaning power. An integrated heater helps to

maintain optimal wash temperatures. See the “Cycle Guide” for

cycles that allow the Steam Clean option.

Wrinkle Shield

™

Option

The Wrinkle Shield

™

option is only available when a drying mode

is selected, and will periodically tumble the load after the end

of the cycle for up to 12 hours. Wrinkle Shield

™

may be ended

at any time by touching the “X” on the touch screen to the right

of the estimated time remaining.

10. Select drying function, if desired

†

From the home screen, touch the “Drying Mode” area of

the screen to show the available Drying Mode settings.

From the Drying Mode screen, choose between Automatic

Drying and Timed Drying. For Automatic Drying, touch AUTO

DRY; then touch the screen to choose between Damp Dry,

Dry, and Extra Dry. For Timed Drying, touch TIMED DRY; then

touch the screen to choose from among 240 min, 270 min,

300 min, 330 min, and 360 min. Expect longer drying times

than with traditional vented dryers.

Temperature

WARM

Spin Speed

EXTRA FAST

Auto Dry

Dry

What to Wash

REGULAR

How to Wash

NORMAL

4:28

3:15

To run a dry cycle only:

Load the drum half full or less for optimal drying performance and

cycle time. From the home screen, touch the “Drying Mode” area

of the screen to show the available Drying Mode settings, and

from the Drying Mode screen, after making the Automatic Drying

or Timed Drying choices as mentioned above, touch “DRYING

ONLY ON.” Do not open the door during the drying cycle.

NOTE: The washer will spin at high speed prior to running the

dry cycle.

IMPORTANT:

■ Do not use dryer sheets.

■ Do not dry comforters or large blankets.

Drying Function (Step 10)

15

12. Use Tools button to change

other settings, if desired

The Tools button gives access to many other settings, utility

cycles, preferences, and information. Touch the TOOLS button

to access the Tools screen, which contains the following

(you will need to scroll down with your nger to access

all of the selections):

Load & Go

™

Dispenser 1

Touch this icon to access:

Load & Go

™

Status Dispenser 1 and choose between:

n

Active

n

Disabled (1 Cycle)

n

Off (Permanently)

Detergent Concentration Dispenser 1 and choose between:

n

2X

n

3X

n

4X

n

5X

n

6X

n

8X

Load & Go

™

Dispenser 2

Touch this icon to access:

Load & Go

™

Status Dispenser 2 and choose between:

n

Active

n

Disabled (1 Cycle)

n

Off (Permanently)

Load & Go

™

Content Dispenser 2 and choose between:

n

Softener

n

Detergent

Once set at Detergent:

Set Concentration Dispenser 2 and choose between:

n

2X

n

4X

n

6X

n

8X

Control Lock

Touch this icon to lock the controls. Swipe up to unlock.

Mute

Touch this icon to mute or unmute sounds.

Utility Cycles

Touch this icon to access the following utility cycles: Drain &

Spin and the Clean Washer with affresh

®

cycle. Touch the utility

cycle you wish to use and follow the screen prompts.

NOTE: To get a Rinse & Spin cycle, select Drain & Spin and

the Extra Rinse option.

Preferences

Touch to access Times and Dates, Sound Volume, Display

Settings, and Regional. Follow the screen prompts.

WiFi

Touch to access Connect to Network, SAID (Smart Appliance

ID) Codes, Mac Address, and WiFi. Follow the screen

prompts.

13. Touch and hold START/PAUSE

button to begin cycle

Touch and hold the START/PAUSE button to start the cycle.

To pause a cycle in progress, touch the START/PAUSE button

once; then touch again to continue the cycle. To cancel a

cycle, touch the “X” on the touch screen to the right of the

estimated time remaining and run Drain & Spin to remove

any excess water.

At each stage of the process, you may notice sounds or

pauses that are different from traditional washers.

When Start/Pause is touched the washer will chime, indicating

it is starting. The drum will make a partial turn. The door will

click when it locks. Once the door has locked, the washer will

begin spinning to sense load size. This sensing process will

continue throughout the cycle. After the load size is sensed,

the estimated time based on load size will be displayed and

water will be added. You may hear water owing through the

dispenser, adding detergent to the load. The actual cycle time

may be lengthened; however, the display will continue to show

the estimated time.

Unlocking the door to add garments:

If you need to open the door to add one or two missed

garments, you may do so when “Add Garments” appears on

the display. The time allowed to add a garment will vary based

on cycle selection and load size.

Touch ADD GARMENTS once; the door will unlock once

the washer movement has stopped. This may take several

seconds. Then close the door and touch and hold Start again

to restart the cycle.

Adding items after “Add Garments” is no longer displayed:

Cancel the current cycle. Water will drain and you will need

to reselect the cycle and restart.

14. Touch POWER button to turn off

washer after cycle ends

The Power button is also used to turn on the washer

before use.

Info

Touch to access Service & Support, Store Demo Mode,

Restore Factory, WiFi Terms and Conditions, and Software Terms

and Conditions. Follow the screen prompts.

NOTE: All changes to settings will remain in effect until settings are

changed again.

16

15. Remove garments promptly

after cycle is nished

After a wash-only cycle, promptly remove

garments after cycle has completed to

avoid odor and rusting of metal objects on

garments. When unloading garments, pull

back the door seal and check for small items between the tub

and the washer drum.

If you will be unable to remove the load promptly after a wash-

only cycle, use the FanFresh

®

option (see Step 11).

After a wash and dry cycle or a dry-only cycle, promptly

remove garments after cycle has completed to reduce wrinkling.

NOTES:

n

This washer has a tight seal to avoid water leaks. To avoid

odors, leave the door open to allow the washer to dry

between uses.

n

If a dry cycle is interrupted and the load removed before

the cool-down period at the end of the cycle, the load will

be very hot.

Setting a delayed start

Touch POWER until the indicators turn on. From the home

screen, make sure the washer is set to the correct time and

date (if it is not, see Step 12 for instructions on how to set the

time and date).

Touch the clock icon on the far right portion of the touch

screen. The “Select a start time” screen will show on the

display. Scroll horizontally to select a preferred start time

for your wash cycle. The times will display in 15-minute

increments up to 8 hours. Touch OKAY to set the start time.

The display will return to the home screen and the clock icon

will turn brown.

To delete or modify the delayed start, touch the clock icon

again and follow the screen prompts.

Temperature

WARM

Spin Speed

EXTRA FAST

Auto Dry

Dry

What to Wash

REGULAR

How to Wash

NORMAL

4:28

3:15

17

Washer Maintenance

WASHER CARE

WASHER CARE (cont.)

Recommendations to Help Keep Your Washer Clean and

Performing at Its Best

1. Always use High Efciency (HE) detergents and follow the

HE detergent manufacturer’s instructions regarding the

amount of HE detergent to use. Never use more than the

recommended amount because that may increase the

rate at which detergent and soil residue accumulate inside

your washer which, in turn, may result in undesirable odor.

2. Use warm or hot water washes sometimes (not

exclusively cold water washes) because they do a better

job of controlling the rate at which soils and detergent

accumulate.

3. Always leave the washer door slightly ajar between

uses to help dry out the washer and avoid the buildup

of odor-causing residue.

4. Periodically clean residue from all interior surfaces of the

window. For better care, wipe the entire inside of the door

with a damp cloth.

Cleaning Your Front Loading Washer

Read these instructions completely before beginning the

routine cleaning processes recommended below. This washer

maintenance procedure should be performed, at a minimum,

once per month or every 30 wash cycles, whichever occurs

sooner, to control the rate at which soils and detergent may

otherwise accumulate in your washer.

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items

from the washer.

2. Inspect the gray-colored seal between the door opening

and the drum for stained areas, soil buildup, or lint. Pull

back the seal to inspect all areas under the seal and to

check for foreign objects or lint.

3. If stained areas, soil buildup, or lint are found, wipe down

these areas of the seal using either of the following two

procedures:

a. affresh

®

Machine Cleaning Wipes Procedure:

i. When the cycle is complete, gently pull back the

rubber door seal and clean the entire surface with the

textured side of an affresh

®

Machine Cleaning Wipe.

b. Dilute Liquid Chlorine Bleach Procedure:

i. Mix a dilute bleach solution, using 3/4 cup (177 mL)

of liquid chlorine bleach and 1 gallon (3.8 L) of warm

tap water.

ii. Wipe the seal area with the dilute solution, using

a damp cloth.

iii. Let stand 5 minutes.

iv. Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open.

IMPORTANT:

■ Wear rubber gloves when cleaning with bleach.

■ Refer to the bleach manufacturer’s instructions for

proper use.

Cleaning the Inside of the Washer

This washer has a special cycle that uses higher water

volumes in combination with affresh

®

Washer Cleaner or

regular liquid chlorine bleach to thoroughly clean the inside

of the washer. Steam washer models also utilize steam to

enhance cleaning in this special cycle.

IMPORTANT: Do not use thickened, easy-pour, or no-splash

bleach when running the Clean Washer with affresh

®

cycle as

excess suds may occur.

NOTE: Read these instructions completely before beginning

the cleaning process.

Begin procedure

1. Clean Washer with affresh

®

Cycle Procedure

(Recommended for best performance):

a. Open the washer door and remove any clothing

or items.

b. Use an affresh

®

Machine Cleaning Wipe or a soft,

damp cloth or sponge to clean the inside door window.

c. Add an affresh

®

Washer Cleaner tablet to the

washer drum.

d. Do not add the affresh

®

Washer Cleaner tablet to

the dispenser drawer.

e. Do not add any detergent or other chemical to the

washer when following this procedure.

f. Close the washer door.

g. Select the Clean Washer with affresh

®

cycle.

h. Select the FanFresh

®

option to help dry the washer

interior after the cycle is complete.

NOTE: The washer remembers your last option selection

and will use it for future wash cycles until you deselect

that option.

i. Touch and hold START/PAUSE button to begin the

cycle. The Clean Washer with affresh

®

Cycle operation

is described below.

CLEANING THE WASHER LOCATION

Keep washer area clear and free from items that would block

the airow for proper drying. This includes clearing piles of

laundry in front of the washer.

18

The Clean Washer with affresh

®

message will ash at the

end of a wash cycle when the washer has run 30 wash

cycles. This is a reminder to run the Clean Washer with

affresh

®

cycle.

If the Clean Washer with affresh

®

cycle is not run, the

message will stop ashing at the end of a wash cycle

after running three more regular wash cycles. After 30 more

wash cycles are completed, the Clean Washer with affresh

®

message will again ash at the end of a wash cycle as a

reminder.

CLEAN WASHER CYCLE REMINDER

WASHER CARE (cont.)

2. Chlorine Bleach Procedure:

a. Open the washer door and remove any clothing

or items.

b. Open the single-load dispenser drawer and add

regular liquid chlorine bleach to the MAX level in

both the bleach compartment and the fabric softener

compartment. Either traditional or HE chlorine bleach

can be used.

IMPORTANT: Do not use thickened, easy-pour,

or no-splash bleach as excess suds may occur.

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage

over time.

c. Close the washer door and the dispenser drawer.

d. Do not add any detergent or other chemicals to the

washer when following this procedure.

e. Select the Clean Washer with affresh

®

cycle.

f. Select the FanFresh

®

option to help dry the washer

interior after the cycle is complete.

NOTE: The washer remembers your last option

selection and will use it for future wash cycles until

you deselect that option.

g. Touch and hold START/PAUSE to begin the cycle.

The Clean Washer with affresh

®

cycle operation

is described below.

NOTE: For best results, do not interrupt cycle.

Description of Clean Washer with affresh

®

Cycle

Operation:

1. The Clean Washer with affresh

®

cycle will determine

whether clothing or other items are in the washer.

2. If no items are detected in the washer, it will proceed with

the cycle.

a. If any items are detected in the washer, “rL”

(remove load) will be displayed. The door will unlock.

Open washer and remove any garments from the

washer drum.

b. Touch POWER to clear the “rL” code.

c. Touch and hold START/PAUSE to restart the cycle.

3. Steam models only: During the rst 20 minutes of the

cycle, it will activate the steamer but the drum will not

spin or ll with water. You may see condensation on the

door window during this initial phase. If you are using

an affresh

®

Washer Cleaner tablet, it will not dissolve

completely during the steam phase. This is normal.

After the cycle is complete, leave the door open slightly to

allow for better ventilation and drying of the washer interior.

WASHER CARE (cont.)

Cleaning the Dispensers

After using the Clean Washer with affresh

®

cycle, you may

nd some residue buildup in the washer’s dispensers.

To remove residue from the single-load dispenser, remove

the drawer and wipe the surfaces with an affresh

®

Machine

Cleaning Wipe or a damp cloth and towel dry either before

or after you run the Clean Washer with affresh

®

cycle. Use

an all-purpose surface cleaner, if needed.

To remove residue from the Load & Go™ dispenser, lift the

handle on the dispenser housing and pull to remove it from

the washer cabinet; then rinse the dispenser thoroughly with

running water. Wipe the outside dispenser surface with an

affresh

®

Machine Cleaning Wipe or a damp cloth, and towel

dry. Use an all-purpose surface cleaner, if needed.

Replace the dispenser in the washer cabinet and make sure

that it is correctly seated.

IMPORTANT: Dispensers are not dishwasher safe.

Cleaning the Outside of the Washer

Use an affresh

®

Machine Cleaning Wipe or a soft, damp

cloth or sponge to wipe up any spills. Occasionally wipe the

outside of your washer to help keep it looking new. Use an

affresh

®

Machine Cleaning Wipe or mild soap and water.

IMPORTANT: To avoid damaging the washer’s nish, do not

use abrasive products.

19

REMOVING THE DISPENSER (cont.)

Removing the Dispenser

To remove:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out

to remove the dispenser.

3. Lift off cover panel

by pulling straight up.

To replace:

1. Position cover panel back

onto posts on dispenser.

Apply slight pressure on

cover panel to seat it.

2. Align edges of dispenser

with guides in washer;

then slide dispenser

back into slot.

Single-Load Dispenser Drawer

It is recommended that you rinse out the Load & Go

™

containers when relling, when changing detergent types or

concentrations, or when the washer will not be used for an

extended period.

1. Pull the dispenser drawer out until it stops.

2. Lift out the Load & Go

™

containers.

3. Lift the ll lid and ush interior thoroughly with warm water.

4. Allow to air dry.

IMPORTANT: Containers are not dishwasher safe.

CLEANING LOAD & GO

™

CONTAINERS

Replace inlet hoses after ve years of use to reduce the risk

of hose failure. Periodically inspect and replace inlet hoses

if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses:

Mark the date of replacement on the label with a permanent

marker.

Check that the old washers are not stuck on the washer inlet

valves.

Use new washers in the new inlet hoses to ensure a proper seal.

WATER INLET HOSES

20

REINSTALLING/USING

WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1.

Refer to the Installation Instructions to locate, level,

and connect washer.

2.

Before using again, run washer through the following

recommended procedure:

To use washer again:

1.

Flush water pipes and hoses. Reconnect water inlet

hoses. Turn on water faucets.

2.

Plug in washer or reconnect power.

3.

Run washer through Heavy Duty cycle to clean washer

and remove antifreeze, if used. Use only HE detergent.

Use half the manufacturer’s recommended amount for

a medium-size load.

TRANSPORTING YOUR WASHER

1. Shut off water faucet. Disconnect and drain water inlet

hose.

2. If washer will be moved during freezing weather, follow

“Winter Storage Care” directions before moving.

3. Disconnect drain hose from drain system and from back

of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside drum.

6. Bundle power cord with a rubber band or cable tie

to keep it from hanging to the ground.

IMPORTANT: Call for service to install new transport bolts.

Do not reuse transport bolts. Washer must be transported

in the upright position. To avoid structural damage to your

washer, it must be properly set up for relocation by a

certied technician.

If moving, or not using your washer for a period of time,

follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer to avoid ooding due

to water pressure surges.

HELPFUL TIP: Attach a reminder note to the washer

to turn the water back on before washer’s next use.

3. Clean the dispensers. See “Cleaning the Dispensers.”

NON-USE AND VACATION CARE

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving

during freezing weather, winterize your washer.

To winterize washer:

1. Shut off water faucet. Disconnect and drain water

inlet hose.

HELPFUL TIP: Attach a reminder note to the washer

to turn the water back on before washer’s next use.

2. Remove drain pump lter.

3. Put 1 qt. (1 L) of R.V.-type antifreeze in drum and run

washer on Normal cycle for about 2 minutes to mix

antifreeze and remaining water.

4. Unplug washer or disconnect power.

La page charge ...

Whirlpool WFW9620HW Mode d'emploi

Whirlpool WFW9620HW Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents