Hotpoint HSB 7M124 X EU Mode d'emploi

Catégorie
Lave-vaisselle
Taper
Mode d'emploi

Ce manuel convient également à

HSB 7M124
EN
English
Operating instructions
DISHWASHER - Contents
Operating instructions,1
Precautions and advice, 2-3
Assistance, 4
Product Data, 5
Installation, 6-7
Description of the appliance, 8
Refined salt and rinse aid, 9
Loading the racks, 10-11
Detergent and dishwasher use, 12
Wash cycles, 13
Special wash cycles and options, 14
Care and maintenance, 15
Troubleshooting, 16
FR
Français
Mode d’emploi
LAVE-VAISSELLE - Sommaire
Mode d’emploi, 1
Précautions et conseils, 3-4
Service, 4
Fiche produit, 5
Installation, 17-18
Description de l’appareil, 19
Sel régénérant et Produit de rinçage, 20
Charger les paniers, 21-22
Produit de lavage et utilisation du lave-vaisselle, 23
Programmes, 24
Programmes spéciaux et Options, 25
Entretien et soin, 26
Anomalies et remèdes, 27
2
EN
Precautions and advice
This appliance was designed and
manufactured in compliance with international
safety standards. The following information
has been provided for safety reasons and
should be read carefully.
Keep this instruction manual in a safe place
for future reference. If the appliance is sold,
given away or moved, make sure the manual
is kept with the machine.
Read the instructions carefully, as they
include important information on safe
installation, use and maintenance.
This appliance was designed for domestic
use or similar applications, for example:
- farmhouses;
- use by guests in hotels, motels and other
residential settings;
- bed & breakfasts.
Remove the appliance from all packaging
and make sure it was not damaged during
transportation. If it was damaged, contact the
retailer and do not proceed any further with
the installation process.
General safety
This appliance should not be operated
by children younger than 8 years, people
with reduced physical, sensory or mental
capacities, or inexperienced people who
are not familiar with the product, unless they
are given close supervision or instructions
on how to use it safely and are made aware
by a responsible person of the dangers its
use might entail.
Children must not play with the appliance.
It is the user's responsibility to clean and
maintain the appliance. Children should
never clean or maintain it unless they are
given supervision.
The appliance was designed for domestic
use inside the home and is not intended for
commercial or industrial use.
The appliance must be used to wash
domestic crockery in accordance with the
instructions in this manual.
The appliance must not be installed
outdoors, even in covered areas. It is
extremely dangerous to leave the machine
exposed to rain and storms.
Do not touch the appliance when barefoot.
When unplugging the appliance always
pull the plug from the mains socket. Do not
pull on the cable.
The water supply tap must be shut off
and the plug should be removed from
the electrical socket at the end of every
cycle and before cleaning the appliance
or carrying out any maintenance work.
The maximum number of place settings is
shown in the product sheet.
If the appliance breaks down, do not under
any circumstances touch the internal parts
in an attempt to perform the repair work
yourself.
Do not lean or sit on the open door: this
may cause the appliance to overturn.
The door should not be left open as it may
create a dangerous obstacle.
Keep detergent and rinse aid out of reach
of children.
The packaging material should not be used
as a toy.
Knives and other utensils with sharp
edges must be placed either with the
points/blades facing downwards in the
cutlery basket or horizontally on the tip-up
compartments or in the tray/third basket,
if available.
Connect the appliance to the water mains
using the new supply hose provided with
the appliance. Do not re-use the old hose.
Install the back side of a free-standing
dishwasher against a wall.
Disposal
To dispose of any packaging materials,
follow local legislation so that the
packagings may be reused.
The European Directive 2012/19/EU
relating to Waste Electrical and Electronic
Equipment (WEEE) states that household
appliances should not be disposed of
using the normal solid urban waste cycle.
Exhausted appliances should be collected
separately in order to optimise the cost of
reusing and recycling the materials inside
the machine, while preventing potential
damage to the atmosphere and public
health. The crossed-out dustbin symbol
shown on all products reminds the owners
of their obligations regarding separated
waste collection.
For further information relating to the correct
disposal of household appliances, owners
may contact the relevant public authority or
the local appliance dealer.
3
Saving energy and respecting the
environment
Saving water and energy
Only begin a wash cycle when the
dishwasher is full. While waiting for the
dishwasher to be filled, prevent unpleasant
odours with the Soak cycle
(if available, see
Wash Cycles).
Select a wash cycle that is suited to the type
of crockery and to the soil level using the
Table of Wash Cycles:
- For dishes with a normal soil level, use
the Eco wash cycle, which guarantees low
energy and water consumption levels.
- If the load is smaller than usual activate
the Half Load option
(see Special wash cycles
and options, if available).
If your electricity supply contract gives
details of electricity-saving time bands, run
the wash cycles when electricity prices are
lower. The Delayed Start option can help
you organise the wash cycles accordingly
(see Special wash cycles and options, if available).
FR
Précautions et conseils
CET appareil a été conçu et fabriqué
conformément aux normes internationales de
sécurité. Ces consignes sont fournies pour
des raisons de sécurité, il faut les lire
attentivement.
Conserver ce mode d’emploi pour pouvoir
le consulter à tout moment. En cas de vente,
de cession ou de déménagement, s’assurer
qu’il accompagne bien l’appareil.
Lire attentivement les instructions: elles
fournissent des conseils importants sur
l’installation, l’utilisation et la sécurité de
l’appareil.
Cet appareil est conçu pour un usage
domestique ou autres applications similaires,
telles que:
- fermes;
- utilisation par les clients d’hôtels, de motels
ou autres locaux de type résidentiel;
- chambres d’hôtes.
Déballer l’appareil et s’assurer qu’il n’a pas
été endommagé pendant le transport. S’il
est abîmé, ne pas le raccorder et contacter
le revendeur.
Sécurité générale
Cet appareil électroménager peut être utilisé
par des enfants âgés de plus de 8 ans
et par des personnes dont les capacités
physiques, sensorielles ou mentales sont
réduites, ou encore sans l'expérience
ou la connaissance nécessaire, mais
sous l'étroite surveillance d'un adulte
responsable ou après que ces personnes
aient reçu des instructions relatives à une
utilisation en toute sécurité de l'appareil et
compris les dangers qui lui sont inhérents.
Les enfants ne doivent pas jouer avec
l'appareil.
Le nettoyage et l'entretien de l'appareil
doivent être effectués par l'utilisateur. Ils ne
doivent pas être effectués par des enfants
sans surveillance.
Cet appareil est conçu pour un usage de
type non professionnel à l'intérieur d'une
habitation.
Cet appareil est destiné au lavage de
vaisselle à usage domestique et selon les
instructions reportées dans cette notice.
Ne pas installer l’appareil à l’extérieur,
même dans un endroit protégé, car il est
extrêmement dangereux de l’exposer à la
pluie et aux orages.
Ne pas toucher au lave-vaisselle pieds nus.
Ne jamais tirer sur le câble pour débrancher
la fiche de la prise de courant.
Fermer le robinet de l’eau et débrancher la
fiche de la prise de courant après chaque
utilisation et avant d’effectuer tous travaux
de nettoyage et d’entretien.
Le nombre maximal de couverts est indiqué
dans la fiche produit.
En cas de panne, éviter à tout prix d’accéder
aux mécanismes internes pour tenter une
réparation.
Ne pas s’appuyer à la porte ouverte ou s’y
asseoir : l’appareil pourrait basculer.
Ne pas garder la porte ouverte pour éviter
de buter contre elle en risquant de se faire
mal.
Garder les produits de lavage et de rinçage
hors de la portée des enfants.
Les emballages ne sont pas des jouets
pour enfants.
Les couteaux et ustensiles de cuisine à
bords tranchants doivent être disposés,
pointes et lames tournées vers le bas,
dans le panier à couverts ou, à plat, sur les
clayettes rabattables du panier supérieur
ou bien encore, si le modèle en est équipé,
dans le plateau ou troisième panier.
L’appareil doit être raccordé à l’arrivée
d’eau en le reliant avec le nouveau tuyau
d’arrivée. L’ancien tuyau d’arrivée ne doit
4
pas être réutilisé.
Si le lave-vaisselle est en libre pose, le côté
arrière de ce dernier doit être placé contre
le mur.
Mise au rebut
Mise au rebut du matériel d’emballage : se
conformer aux réglementations locales de
manière à ce que les emballages puissent
être recyclés.
La directive européenne 2012/19/EU sur
les déchets d’équipements électriques
et électroniques (DEEE), prévoit que les
électroménagers ne peuvent pas être
traités comme des déchets solides urbains
normaux. Les appareils usagés doivent
être collectés séparément afin d’optimiser
le taux de récupération et le recyclage
des matériaux qui les composent et
réduire l’impact sur la santé humaine et
l’environnement Le symbole de la poubelle
barrée est appliqué sur tous les produits
pour rappeler qu’ils font l’objet d’une
collecte sélective.
Pour tout autre renseignement sur la
collecte des électroménagers usés, prière
de s’adresser au service public préposé
ou au vendeur.
Economies et respect de
l’environnement
Faire des économies d’eau et d’électricité
Ne faire fonctionner le lave-vaisselle
que quand il est rempli au maximum de
sa capacité. Dans l’attente de remplir
l’appareil, lancer le cycle de Trempage
pour éviter la formation de mauvaises
odeurs
(si disponible - voir Programmes).
Sélectionner un programme adapté
au type de vaisselle et à son degré de
salissure, consulter pour cela le Tableau
des programmes :
- pour de la vaisselle normalement sale,
choisir le programme Eco (économique),
il limite la quantité d’eau et d’électricité
utilisée.
- pour une quantité réduite de vaisselle,
choisir l’option Demi-charge
(si disponible voir
Programmes Spéciaux et Options).
Si le contrat de fourniture d’électricité
prévoit des tranches horaires à prix réduit,
effectuer les lavages pendant ces heures
creuses. L’option Départ différé peut aider
à organiser les lavages dans ce sens
(
si
disponible voir Programmes Spéciaux et Options).
EN
Assistance
Before contacting Assistance:
Check whether the problem can be resolved using the
Troubleshooting guide
(see Troubleshooting).
Restart the programme to check whether the problem
has ceased to exist.
If the problem persists, contact the Authorised Technical
Assistance Service.
Never use the services of unauthorised technicians.
Please have the following information to hand:
The type of malfunction.
The appliance model (Mod.).
The serial number (S/N).
This information can be found on the appliance data plate
(see Description of the appliance)
.
FR
Service
Avant d’appeler le service d’assistance technique:
Vérifier s’il est possible de résoudre l’anomalie soi-même
(voir Anomalies et remèdes).
Faire repartir le programme pour s’assurer que
l’inconvénient a été résolu.
Si ce n’est pas le cas, contacter un Service d’Assistance
Technique agréé.
Ne jamais faire appel à des techniciens non agréés.
Communiquer:
le type d’anomalie;
le modèle de l’appareil (Mod.);
le numéro de série (S/N).
Ces informations figurent sur la plaque signalétique
apposée sur l’appareil
(voir Description de l’appareil).
5
Product Fiche
Brand
HOTPOINT ARISTON
Model
HSB 7M124
Rated capacity in standard place settings (1)
14
Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)
A++
Energy consumption per year in kWh (2)
265.0
Energy consumption of the standard cleaning cycle in kWh
0.93
Power consumption of the off-mode in W
0.5
Power consumption of the left-on mode in W
5.0
Water consumption per year in litres (3)
2520.0
Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)
A
Programme time for standard cleaning cycle in minutes
190
The duration of the left-on mode in minutes
12
Noise in dB(A) Re 1pW
44
Built-in model
Yes
NOTES
1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled
tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle
corresponds to the Eco cycle.
2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy consumption
depends on how the appliance is used.
3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.
EN
Product Data (product fiche)
Fiche de produit
Marque
HOTPOINT ARISTON
Modèle
HSB 7M124
Capacité nominale dans un environnement standard (1)
14
Classe énergétique sur une échelle de A+++ (faible consommation) à D (consommation élevée)
A++
Consommation d''énergie par année en kWh (2)
265.0
Consommation d''énergie du cycle de lavage standard en kWh
0.93
Consommation d''energie en mode "off" en W
0.5
Consommation d''energie en mode "on" en W
5.0
Consommation d''eau par an en litres (3)
2520.0
Classe d’efcacité du séchage sur une échelle de G (efcacité minimum) à A (efcacité maximum)
A
Durée du programme pour un cycle de lavage standard en minutes
190
Durée du mode "on" en minutes
12
Émissions acoustiques dans l’air, exprimées en dB(A) re 1 pW
44
Encastrable
Oui
NOTES
1) Les informations sur l’étiquette et sur la che se rapportent au cycle de lavage standard. Ce programme convient pour laver
une vaisselle normalement sale, et il s’agit des programmes les plus efcaces en termes de consommation combinée d’eau et
d’énergie. Le cycle de lavage standard correspond au cycle éco.
2) Sur la base de 280 cycles de lavage standard avec une alimentation en eau froide et une consommation en modes à faible
puissance. La consommation réelle d’énergie dépend des conditions d’utilisation de l’appareil
3) Sur la base de 280 cycles de lavage standard. La consommation réelle d’énergie dépend des conditions d’utilisation de
l’appareil.
FR
Fiche de produit
6
EN
Installation
* Only available in selected models.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto
its back.
Connecting the water supply
Adaptation of the water supply for installation should only
be performed by a qualified technician.
The water inlet and outlet hoses may be positioned towards
the right or the left in order to achieve the best possible
installation.
Make sure the dishwasher does not bend or squash the hoses.
Connecting the water inlet hose
To a 3/4” gas cold or hot water connection point (max.
60°C).
Run the water until it is perfectly clear.
Screw the inlet hose tightly into position and turn off the
tap.
If the inlet hose is not long enough, contact a specialist
store or an authorised technician
(see Assistance)
.
The water pressure must be within the values indicated
in the Technical Data table - otherwise the dishwasher may
be function properly.
Make sure the hose is not bent or compressed.
Connecting the water outlet hose
Connect the outlet hose to a drain duct with a minimum
diameter of 2 cm. (A)
The outlet hose connection must be at a height ranging from
40 to 80 cm from the floor or surface where the dishwasher
rests.
Before connecting the water outlet hose to the sink drain,
remove the plastic plug (B).
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water
supply in the event of anomalies or leaks from inside the
appliance.
Some models are also equipped with the supplementary
safety device New Acqua Stop*, which guarantees anti-
flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstances should the water inlet hose be cut
as it contains live electrical parts.
Electrical connection
Before inserting the plug into the electrical socket, make
sure that:
The socket is earthed and complies with current
regulations;
the socket can withstand the maximum load of the
appliance as shown on the data plate located on the inside
of the door
(see chapter Description of the appliance);
The power supply voltage falls within the values indicated
on the data plate on the inside of the door.
The socket is compatible with the plug of the appliance. If
this is not the case, ask an authorised technician to replace
the plug (
see Assistance
). Do not use extension cables or
multiple sockets.
Once the appliance has been installed, the power supply
cable and the electrical socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced
by the manufacturer or its authorised Technical Assistance
Service in order to prevent all potential hazards.
(See
Assistance)
The Company shall not be held responsible for any
incidents, if these regulations are not observed.
Positioning and levelling
1. Position the dishwasher on a level sturdy floor. If the floor is
uneven, the front feet of the appliance may be adjusted until
it reaches a horizontal position. If the appliance is levelled
correctly, it will be more stable and much less likely to move
or cause vibrations and noise while it is operating.
2. Before recessing the dishwasher, stick the adhesive
transparent strip
* under the wooden shelf in order to protect
it from any condensation which may form.
3. Place the dishwasher so that its sides or back panel are in
contact with the adjacent cabinets or the wall. This appliance
can also be recessed under a single worktop
*
(see the
Assembly instruction sheet)
.
4
*. To adjust the height of the rear foot, turn the red hexagonal
bushing on the lower central part at the front of the dishwasher
using a hexagonal spanner with an opening of 8 mm. Turn the
spanner in a clockwise direction to increase the height and
in an anticlockwise direction to decrease it.
(see Building-in
instruction sheet attached to the documentation)
MIN 40 cm
MAX 80 cm
7
EN
Advice regarding the first wash cycle
After the installation, remove the stoppers from the racks and
the retaining elastic elements from the upper rack
(if any).
Water softener settings
Before starting the first wash cycle, set the hardness lev-
el of
the water from the mains supply.
(see chapter Rinse
aid and refined salt).
First load the softener tank with water, then introduce about
1 kg of salt. It is perfectly normal for water to flow out.
As soon as this procedure is complete, run a wash cycle.
Only use salt that has been specifically designed for dish-
washers.
After the salt has been poured into the machine, the LOW
SALT indicator light
* switches off.
If the salt container is not filled, the water softener and the
heating element may be damaged as a result.
Technical data
Dimensions
width 59.5 cm
height 82 cm
depth 57 cm
Capacity 14 standard place-settings
Water supply pressure
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 – 145 psi
Power supply voltage See appliance data plate
Total absorbed power See appliance data plate
Fuse See appliance data plate
This dishwasher conforms to the
following European Community
Directives:
-2006/95/EC (Low Voltage)
-2004/108/EC (Electromagnetic
Compatibility)
-2009/125/EC (Comm. Reg.
1016/2010) (Ecodesign)
-97/17/EC (Labelling)
-2012/19/EU Waste Electrical
and Electronic Equipment (WEEE)
* Only available in selected models.
The machine has a buzzer/set of tones
(depending on the
dishwasher model
) to inform the user that a command has
been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed
light
(depending on the dishwasher model)
.
The display provides useful information concerning the type
of wash cycle, drying/wash-cycle phase, remaining time,
temperature etc etc.
8
EN
Description of the
appliance
***Only in completely built-in models.
* Only available in selected models.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Overall view
1. Upper rack
2. Upper sprayer arm
3. Tip-up compartments
4. Rack height adjuster
5. Lower rack
6. Lower sprayer arm
7. Washing filter
8. Salt dispenser
9. Detergent dispenser and rinse-aid dispenser
10. Data plate
11. Control panel***
Control panel
Start/Pause button and
indicator light*
Salt indicator
light
*
Indicator light Wash
Cycle End and
Delayed Start 9h.
Indicator light Drying
and Delayed Start 6h.
Indicator light Washing
and Delayed Start 3h.
Knob
Wash Cycle Select
Button/Indicator
light
* On-Off/
Reset
Rinse-aid
indicator
light*
Button and indicator light
Delayed start
Button and
indicator light
Half Load
Door handle
9
EN
Refined Salt and Rinse Aid
M
A
X
Only use products which have been specifically designed
for dishwashers. Do not use table salt or industrial salt.
Follow the instructions given on the packaging.
If you are using a multi-function product, we recommend
that you add salt in any case, especially if the water is hard
or very hard.
(Follow the instructions given on the packaging.)
If you do not add salt or rinse aid, the LOW SALT* and
LOW RINSE AID
* indicator lights will remain lit.
Measuring out the refined salt
The use of salt prevents the formation of LIMESCALE on the
dishes and on the machine's functional components.
• It is important that the salt dispenser be never empty.
• It is important to set the water hardness.
The salt dispenser is located in the lower part of the dishwasher
(see Description)
and should be filled:
When the LOW RINSE AID indicator light in the control panel
is lit *;
When the green float* on the cap of the salt dispenser is no
longer visible.
See autonomy in the water hardness table.
1. Remove the lower rack and unscrew the
container cap (anticlockwise).
2. Only the first time you do this: fill the water
dispenser up to the edge.
3. Position the funnel
(see figure)
and
fill the salt container right up to its edge
(approximately 1 kg); it is not unusual for a
little water to leak out.
4. Remove the funnel and wipe any salt residue away from the
opening; rinse the cap under running water and then screw it on.
It is advisable to perform this procedure every time you add salt
to the container.
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash cycle (this could damage
the water softener beyond repair).
Whenever you need to add salt, we recommend carrying out
the procedure before the washing cycle is started.
Setting the water hardness
For perfect water softener operation, it is essential that the
adjustment be based on the water hardness in your house. Ask
your local water supplier for this information. The factory setting
is for medium water hardness.
• Switch the dishwasher on using the On/Off button.
• Switch it off using the On/Off button
• Press and hold the START/PAUSE button for 5 seconds.
• Switch it on using the On/Off button
The salt indicator light flashes (as many times as the current
selection.)
• Set the knob to the desired hardness level number
(see Table
on water hardness.)
• Switch it off using the On/Off button
• Setting is complete!
(°dH = hardness measured in German degrees - °f = hardness
measured in French degrees – mmol/l = millimoles per litre)
Measuring out the rinse aid
Rinse aid makes dish DRYING easier. The rinse aid dispenser
should be filled:
When the LOW RINSE AID indicator light on the panel/display
is lit *;
When the dark optical indicator* on the dispenser door “D”
becomes transparent.
1. Open the dispenser “D” by pressing and pulling up the tab
on the lid;
2. Carefully introduce the rinse aid as far as the maximum
reference notch in the filling space - avoid spilling it. If this
happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the tub.
Adjusting the amount of rinse aid
If you are not completely satisfied with the drying results, you
may want to adjust the quantity of rinse aid used.
• Switch the dishwasher on using the On/Off button.
• Switch it off using the On/Off button
• Press the START/PAUSE button three times
• Switch it on using the On/Off button
The rinse-aid indicator light will flash as many times as the
level that was set.
Set the knob to the level number of rinse aid quantity to be
supplied.
• Switch it off using the On/Off button
• Setting is complete!
If the rinse aid level is set to ZERO, the rinse aid will not be
supplied and the low rinse aid indicator light will not be lit if you
run out of it.
A maximum of 4 levels can be set according to the dishwasher
model. The factory setting is for a medium level.
If you see bluish streaks on the dishes, set a low number (1-2).
If there are drops of water or limescale marks on the dishes,
set a high number (3-4).
Water Hardness Table
Average autonomy
salt dispenser with 1
wash cycle per day
level °dH °fH mmol/l months
1 0 - 6 0 - 10 0 - 1 7 months
2 6 - 11 11 - 20 1.1 - 2 5 months
3 12 - 17 21 - 30 2.1 - 3 3 months
4 17 - 34 31 - 60 3.1 - 6 2 months
5
*
34 - 50 61 - 90 6.1 - 9 2/3 weeks
For values between 0°f and 10°f, we do not recommend the use
of salt. A setting of 5 may increase cycle duration.
* Only available in selected models.
10
EN
Loading the racks
* Only available in selected models.
Tips
Before loading the racks, remove all food residues from the
crockery and empty liquids from glasses and containers. No
preventive rinsing is needed under running water.
Arrange the crockery so that it is held in place firmly and does
not tip over; and arrange the containers with the openings facing
downwards and the concave/convex parts placed obliquely,
thus allowing the water to reach every surface and flow freely.
Make sure that the lids, handles, trays and frying pans do not
prevent the spray arms from rotating. Place any small items in
the cutlery basket.
Since plastic dishes and non-stick frying pans usually retain more
water drops, their drying will be not so good as that of ceramic
or stainless-steel dishes.
Lightweight items such as plastic containers should be placed in
the upper rack and arranged so that they cannot move.
After loading the appliance, make sure that the spray arms can
rotate freely.
Lower rack
The lower rack can hold pans, lids, dishes, salad bowls, cutlery
etc. Large plates and lids should ideally be placed at the sides.
Very soiled dishes and pans should be placed in the lower rack
because in this sector the water sprays are stronger and allow
a higher washing performance.
Several dishwasher models are fitted with tip-up sectors
*.
They can be used in a vertical position when arranging dishes
or in a horizontal position (lower) to load pans and salad bowls
easily.
Cutlery basket
The basket is equipped with top grilles for improved cutlery ar-
rangement. The cutlery basket should be positioned only at the
front of the lower rack
Upper rack
Load this rack with delicate and lightweight crockery such as
glasses, cups, saucers and shallow salad bowls.
Several dishwasher models are fitted with tip-up sectors
*.
They can be used in a vertical position when arranging tea/
dessert saucers or in a lower position to load bowls and food
containers.
11
EN
The upper rack can be adjusted for height based on requirements:
high position to place bulky crockery in the lower rack and low
position to make the most of the tip-up compartments/sectors
by creating more space upwards.
Tip-up compartments with adjustable position*
The side tip-up compartments can be positioned at three different
heights to optimize the arrangement of crockery inside the rack.
Wine glasses can be placed safely
in the tip-up compartments by
inserting the stem of each glass
into the corresponding slots. For
optimum drying results incline the
tip-up compartments more. To
change the inclination, pull up the
tip-up compartment, slide it slightly
and position it as you wish.
Cutlery tray*
Some dishwasher models are fitted with a sliding tray which
can be used to hold serving utensils or small cups. For optimum
washing performance avoid positioning bulky crockery directly
below the tray. The cutlery tray can be removed
(see Figure).
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower position.
The height of the upper rack should be adjusted WHEN THE
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.
If the rack is equipped with a Lift-Up
device*
(see figure)
, lift
it up by holding its sides. To restore the lower position, press
the levers (A) at the sides of the rack and follow the rack down.
Unsuitable crockery
Wooden crockery and cutlery.
Delicate decorated glasses, artistic handicraft and antique
crockery. Their decorations are not resistant.
Parts in synthetic material which do not withstand high
temperatures.
Copper and tin crockery.
Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces
can change and fade during the washing process. Some types
of glass (e.g. crystal objects) can become opaque after a number
of wash cycles too.
Damage to glass and crockery
Caused by:
Type of glass and glass production process.
Chemical composition of detergent.
Water temperature of rinse cycle.
Tips:
Only use glasses and porcelain guaranteed by the
manufacturer as dishwasher safe.
Use a delicate detergent suitable for crockery.
Collect glasses and cutlery from the dishwasher as soon as
the wash cycle is over.
*Only available in selected models with different numbers and
positions.
12
EN
Detergent and
dishwasher use
* Only available in selected models.
Measuring out the detergent
A good wash result also depends on the correct
amount of detergent being used. Exceeding the stated
amount does not result in a more effective wash and
increases environmental pollution.
Based on how soiled the items are, the amount can be
adjusted to individual cases using powder or liquid
detergent.
In the case of normally soiled items, use approximately either
35 gr (powder detergent) or 35 ml (liquid detergent). If tablets
are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has been rinsed
with water before being placed in the dishwasher, reduce the
amount of detergent used accordingly.
For good washing results also follow the instructions shown
on the detergent box.
For further questions please ask the detergent producers.
To open the detergent dispenser use the opening device “A”.
Introduce the detergent into the dry dispenser “B” only.
Place the amount of detergent for pre-washing directly inside
the tub.
1. When measuring out the detergent refer to the Table of wash
cycles to add the proper quantity. Compartment B comprises a
level showing the maximum quantity of liquid or powder detergent
that can be added to each cycle.
2. Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until
the closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the wash cycle.
If all-in-one detergents are used, we recommend using the TABS
option, because it adjusts the cycle so that the best washing and
drying results are always achieved.
Only use detergent which has been specifically designed
for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam residues
remaining in the machine after the cycle has ended.
To achieve the best washing and drying results, the combined
use of detergent, rinse aid liquid and refined salt is required.
We recommend using detergents that do not contain
phosphates or chlorine, as these products are harmful
to the environment.
Starting the dishwasher
1. Turn the water tap on.
2. Press the ON/OFF button:
3. Open the door and pour in a suitable amount of detergent.
4. Load the racks
(see Loading the racks)
and shut the door.
5.
Select the wash cycle by turning the WASH CYCLE
SELECT knob clockwise: align the notch in the knob with
the number/symbol representing the desired wash cycle. The
START/PAUSE indicator light will go on.
6. Select the wash options*
(see Special wash cycles and
options.)
7. Start the cycle by pressing the Start/Pause button: a beep will
sound
* and the indicator light corresponding to the wash
phase will go on to signal that the cycle has begun.
8. At the end a few beeps * will signal the end of the wash cycle
and the END indicator light will go on. Switch off the appliance
by pressing the ON/OFF button, shut off the water tap and unplug
the appliance from the electricity socket.
9. Wait a few minutes before removing the crockery to avoid
getting burnt. Unload the racks, beginning with the lower level.
- The machine will switch off automatically during
certain periods of inactivity in order to minimise
electricity consumption.
Changing a wash cycle in progress
If a mistake was made in the wash cycle selection process, it
is possible to change the cycle provided that it has only just
begun: once the wash cycle has started, in order to change
the wash cycle switch off the machine by pressing and holding
the ON/OFF/Reset button. Switch it back on using the same
button and select the desired wash cycle and options.
Adding extra crockery
Press the Start/Pause button - the corresponding indicator
light will flash. Open the door, taking care to avoid the
escaping steam, and place the crockery inside the appliance.
Press the Start/Pause button (fixed light): the cycle starts
again.
If the Start/Pause button is pressed so as to pause the
machine, both the wash cycle and the Delayed Start function
(if selected) are interrupted.
At this stage the wash cycle cannot be changed.
Accidental interruptions
If the door is opened during the wash cycle or there is a
power cut, the cycle stops. It starts again from the point at
which it was interrupted once the door has been shut or the
electricity supply restored.
13
EN
Wash cycles
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash cycle
Wash cycle
which
include
drying
Options
Approximate
duration of wash
cycles
Water
consumption
(l/cycle)
Energy
consumption
(KWh/cycle)
Eco Yes
Delayed start – Half Load
03:10’ 9 0,93
Auto Intensive Yes
Delayed start – Half Load
02:00’ - 3:10’ 14 - 15,5 1,40 - 1,70
Auto Normal Yes
Delayed start – Half Load
1:30’ - 02:30’ 14,5 - 16 1,15 - 1,30
Auto Fast No
Delayed start – Half Load
00:40’ - 1:20’ 13 - 14,5 1,15 - 1,25
Delicate Yes
Delayed start – Half Load
01:40’ 11 1,05
Express 40’ No
Delayed start
00:40’ 9,5 0,9
Soak No
Delayed start – Half Load
00:12’ 4,5 0,01
Instructions on wash-cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 29 gr/ml + 6 gr/ml** – 1
Tab (**Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 35 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 29 gr/ml + 6 gr/ml** – 1 Tab
4. Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab
5. Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab
6. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab
7. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W.
14
EN
Special wash cycles
and Options
Delayed start*
It is possible to delay the start time of the wash cycle by 3,
6 or 9 hours:
1: After selecting the desired wash cycle and any other
options, press the DELAYED START button: the indicator
light will go on.
2: Select the desired delay time by pressing the Delayed Start
button repeatedly. The indicator lights for the wash phase (3
hours), drying phase (6 hours) and end phase (9 hours) will
switch on in succession.
If the Delayed Start button is pressed again, the option is
deselected and the indicator light switches off.
3. After the selection process, the countdown will begin if
the Start/Pause button is pressed. The selected delay-period
indicator light flashes and the Start/Pause button stops
flashing (fixed light.)
4. Once this time has elapsed, the DELAYED START indicator
light switches off and the wash cycle begins.
The Delayed Start function cannot be set once the wash
has been started.
Wash options*
The OPTIONS may only be set, changed or reset after the
wash cycle has been selected and before the Start/Pause
button has been pressed.
Only the options whic are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
corresponding symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another
(previously selected) option, it will flash 3 times and switch
off, while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Half load*
If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
Select the wash cycle and press the HALF LOAD button; the
indicator light will go on.
Press the HALF LOAD button again to deselect this option.
Remember to halve the amount of detergent.
It is better to use powder detergent.
* Only available in selected models.
Notes:
Optimum performance levels when using the “Fast" and "Express
40’” cycles can be achieved by respecting the specified number
of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
15
EN
Care and maintenance
Shutting off the water and electricity
supplies
Turn off the water tap after every wash cycle to avoid leaks.
Always
unplug the appliance when cleaning it and when
performing maintenance work.
Cleaning the dishwasher
The
external surfaces of the machine and the control panel
can be cleaned using a non-abrasive cloth which has been
dampened with water. Do not use solvents or abrasive
products.
Any
marks on the inside of the appliance may be removed
using a cloth dampened with water and a little vinegar.
Preventing unpleasant odours
Always
keep the door of the appliance ajar in order to avoid
moisture from forming and being trapped inside the machine.
Clean
the seals around the door and detergent dispensers
regularly using a damp sponge. This will avoid food becoming
trapped in the seals, which is the main cause behind the
formation of unpleasant odours.
Cleaning the spray arms
Food residue may become encrusted onto the sprayer arms
and block the holes used to spray the water. It is therefore
recommended that you check the arms from time to time and
clean them with a small non-metallic brush.
The two spray arms may both be removed.
To remove the upper spray arm,
turn the plastic locking ring in an
anti-clockwise direction. The upper
sprayer arm should be replaced
so that the side with the greater
number of holes is facing upwards.
The lower spray arm can be removed
by pressing on the side tabs and
pulling it upwards.
Cleaning the water inlet hose*
If the water hoses are new or have not been used for an extended
period of time, let the water run to make sure it is clear and free
of impurities before performing the necessary connections. If this
precaution is not taken, the water inlet could become blocked
and damage the dishwasher.
Clean the water inlet filter at the tap outlet regularly.
- Turn off the water tap.
- Unscrew the end of the water inlet hose, remove the filter and
clean it carefully under running water.
- Re-place the filter and screw the water hose back into position.
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the water.
They must be cleaned if you wish to achieve the best results in
every wash.
Clean the filters regularly.
The dishwasher must not be used without filters or if the filter
is loose.
After several washes, check the filter assembly and if necessary
clean it thoroughly under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction and
pull it out
(fig. 1).
2. Remove the cup filter B by exerting a slight pressure on the
side flaps
(fig. 2);
3. Slide out the stainless-steel plate filter A.
(fig. 3).
4. Inspect the trap and remove any food residues. NEVER
REMOVE the wash-cycle pump protection
(black detail) (fig.4).
After cleaning the filters, re-place the filter assembly and fix it
in position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
Disconnect the appliance from the electricity supply and shut
off the water tap.
Leave the door of the appliance ajar.
When you return, run a wash cycle when the dishwasher is
empty.
* Only available in selected models.
16
EN
Troubleshooting
Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.
* Only available in selected models.
Problem: Possible causes / Solutions:
The dishwasher does not start
or cannot be controlled.
• The water supply tap is not turned on.
• Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately
one minute and reset the wash cycle.
• The appliance has not been plugged in properly or another electricity socket should be used.
• The dishwasher door has not been closed properly.
The door won’t close.
• Make sure that the racks were inserted all the way.
• The lock was released. Strongly push the door until a “clacking” noise is heard.
No water drain out of the
dishwasher.
• The wash cycle has not nished yet.
• The water drain hose is bent
(see Installation).
• The drain duct is clogged up.
• The lter is clogged up with food residues.
• Check the height of the drain hose.
The dishwasher makes
excessive noise.
• The dishes are rattling against each other or against the spray arms. Place the dishes
properly and make sure the spray arms can rotate freely.
• Too much foam: the detergent has not been measured out correctly or it is not suitable for use
in dishwashers.
(See Detergent and dishwasher use.)
Do not prewash the dishes by hand.
The dishes and glasses are
covered in a white lm or
limescale deposits.
• No rened salt.
• Water hardness adjustment is not suitable: increase the relevant values.
(See Rened Salt
and Rinse Aid.)
• The salt and rinse-aid dispenser cap has not been closed properly.
• The rinse aid has been used up or the dosage is too low.
The dishes and glasses are
streaked or have a bluish
tinge.
• The rinse aid dosage is too high.
The crockery has not been
dried properly.
A wash cycle without a drying programme has been selected.
• The rinse aid has been used up.
(See Rened Salt and Rinse Aid.)
• The rinse aid dispenser setting is not suitable.
• The crockery is made from non-stick material or plastic; the presence of water drops is
normal.
The dishes are not clean. • The crockery has not been arranged properly.
• The spray arms cannot rotate freely, being hindered by the dishes.
• The wash cycle is too gentle
(see Wash Cycles).
• Too much foam: the detergent has not been measured out correctly or it is not suitable for use
in dishwashers.
(See Detergent and dishwasher use.)
• The lid on the rinse aid compartment has not been closed correctly.
• The lter is dirty or clogged up
(see Care and maintenance.)
• The rened salt level is low
(See Rened Salt and Rinse Aid.)
• Make sure that the height of the dishes is compatible with the rack adjustment.
• The holes in the sprayer arms are clogged up.
(See Care and maintenance.)
The dishwasher won’t load
any water.
It is blocked with ashing lights.
• There is no water in the mains supply or the tap is shut off.
• The water inlet hose is bent
(see Installation).
• The lters are clogged up: they need cleaning.
(See Care and maintenance.)
• The drain duct is clogged up: it needs cleaning.
After checking and cleaning, switch the dishwasher on and off and start a new wash cycle.
• If the problem persists, turn off the water tap, remove the plug and call the Service Centre.
FR
17
Installation
En cas de déménagement, transporter l’appareil
verticalement ; si besoin est, l’incliner sur le dos.
Raccordements hydrauliques
L’adaptation des installations de plomberie de
l’installation doit être effectuée par du personnel qualifié
Les tuyaux d’amenée et d’évacuation de l’eau peuvent être
orientés vers la droite ou vers la gauche pour simplifier
l’installation.
Attention à ce que les tuyaux d’arrivée et d’évacuation ne
soient pas pliés ou écrasés par le lave-vaisselle.
Raccord du tuyau d’amenée de l’eau
• Auneprised'eaufiletée3/4”gazfroideouchaude(max.
60°C).
• Fairecoulerl'eaujusqu'àcequ'ellesoitlimpide.
• Bienvisserletuyaud'évacuationetouvrirlerobinet.
Si la longueur du tuyau d’amenée ne suffit pas, s’adresser
à un magasin spécialisé ou à un technicien agréé
(voir
Assistance)
.
La pression de l’eau doit être comprise entre les valeurs
citées dans le tableau des Caractéristiques techniques,
autrement le lave-vaisselle risque de ne pas fonctionner
correctement.
Faireattentionàcequ'iln'yaitnipliuresniétranglements
au niveau du tuyau.
Raccordement du tuyau d’évacuation de
l’eau
Raccorder le tuyau d’évacuation à une conduite d’évacuation
ayantaumoins2cmdediamètre.(A)
Leraccorddutuyaud’évacuationdoitêtreplacéentre40et
80 cm au-dessus du sol ou du plan d’appui du lave-vaisselle.
Avant de raccorder le tuyau d’évacuation de l’eau au siphon
del’évier,retirerlebouchonenplastique(B).
Sécurité anti-fuite
Pour éviter tout risque d’inondation, le lave-vaisselle :
- est équipé d’un dispositif qui coupe l’arrivée de l’eau en
cas d’anomalie ou de fuite à l’intérieur de l’appareil.
Quelques modèles sont aussi équipés d’un dispositif de
sécurité supplémentaire New Acqua Stop*, qui garantit
contretoutrisqued'inondationmêmeencasderupturedu
tuyau d’amenée de l’eau.
ATTENTION : TENSION DANGEREUSE !
Il ne faut en aucun cas couper le tuyau d’amenée de l’eau
car il contient des parties sous tension.
Raccordement électrique
Avantdebrancherlafichedanslaprisedecourant,s'assurer
que :
• laprise est bien reliée à la terre et est conforme aux
réglementations en vigueur ;
• lapriseestbienapteàsupporterlapuissancemaximale
de la machine reportée sur la plaquette signalétique fixée
à la contre-porte
(voirchapitreDescriptiondulave-vaisselle);
• latensiond’alimentationestbiencompriseentreles
valeurs figurant sur la plaque signalétique de la contre-
porte ;
• lapriseestbiencompatibleaveclafichedel’appareil.
Autrement, faire remplacer la fiche par un technicien
agréé
(voirAssistance)
; n’utiliser ni rallonges ni prises
multiples.
Après installation de l’appareil, le cordon d’alimentation
électrique et la prise de courant doivent être facilement
accessibles.
Le câble ne doit être ni plié ni trop écrasé.
Afin d’éviter tout danger, faire changer le cordon
d’alimentation abîmé, par le fabricant ou par son service
après-vente.
(VoirAssistance)
Nous déclinons toute responsabilité en cas de non-
respect des normes énumérées ci-dessus.
Mise en place et mise à niveau
1. Installer le lave-vaisselle sur un sol plat et rigide.
Compenser les irrégularités en vissant ou en dévissant les
piedsavantjusqu'àcequel'horizontalitédel’appareilsoit
parfaite. Une bonne horizontalité garantit la stabilité de
l’appareil et supprime tout risque de bruits et de vibrations.
2.Avantd'encastrerlelave-vaisselle,collerlerubanadhésif
transparent* sous le plan en bois pour le protéger contre le
risque de formation de condensation.
3.Installerlelave-vaisselledemanièreàcequelescôtéset
laparoiarrièretouchentauxmeublesadjacentsouaumur.
L’appareil peut être encastré sous un plan de travail continu*
(voirfeuilledemontage)
.
4
*. Pour régler la hauteur du pied arrière, agir sur la douille
rouge à six pans située dans la partie avant du lave-
vaisselle, en bas et au milieu, à l’aide d’une clé mâle à six
pans, ouverture 8 mm. Tourner dans le sens des aiguilles
d’une montre pour augmenter la hauteur et dans le sens
inverse pour la diminuer.
(voirfeuilled’instructionsjointeà
la documentation)
MIN 40 cm
MAX 80 cm
* Présent uniquement sur certains modèles.
18
FR
Voyant fin de
programme et départ
différé 9h.
Caractéristiques techniques
Dimensions
largeur 59.5 cm
hauteur 82 cm
profondeur 57 cm
Capacité 14 couverts standard
Pression eau
d’alimentation
0,05 ÷ 1 MPa (0,5 ÷ 10 bar)
7,25 – 145 psi
Tension
d’alimentation
Voir étiquette des caractéristiques
Puissance totale
absorbée
Voir étiquette des caractéristiques
Fusible Voir étiquette des caractéristiques
Cet appareil est conforme aux
Directives Communautaires suivantes:
- 2006/95/EC (Basse Tension)
- 2004/108/EC (Compatibilité
Electromagnétique)
-2009/125/EC (Comm. Reg.
1016/2010) (Ecodesign)
-97/17/EC (Etiquetage)
-2012/19/EU (DEEE)
Cet électroménager dispose de signaux sonores/bips
(selon
le modèle de lave-vaisselle
) qui signalent que la commande
a été activée: allumage, fin de cycle etc..
Tous les symboles/voyants/led lumineux du bandeau de
commande/afficheur peuvent avoir des couleurs différentes,
flasher ou être en fixe.
(selonlemodèledelave-vaisselle)
.
Affichage d'informations utiles concernant le type de cycle
sélectionné, la phase de lavage/séchage, le temps résiduel,
la température etc.... etc...
Conseils pour le premier lavage
Aprèsl'installation,retirerlescalesplacéessouslespaniers
ainsi que les élastiques de fixation du panier supérieur
(si
prévus).
Réglages de l'adoucisseur d'eau
Avant de lancer le premier lavage, sélectionner le ni-
veau de dureté
del'eauduréseau.
(voirchapitreProduit
de rinçage et sel régénérant))
Lors de son premier chargement, il faut d'abord remplir
l'adoucisseurd'eaupuisintroduireenviron1kgdesel. Il
estnormalquedel'eaudéborde..
Fairedémarreruncycledelavagetoutdesuiteaprès.
N’utiliser que du sel spécial lave-vaisselle.
Après remplissage du réservoir, le voyant SEL*s'éteint.
L'absencederemplissageduréservoirà sel peut
endommager l’adoucisseur d’eau et l’élément chauffant.
* Présent uniquement sur certains modèles.
FR
19
Description de l’appareil
*** Uniquement pour modèles « tout intégrable » * Présent uniquement sur certains modèles.
Le nombre et les types de programmes varient selon le modèle de lave-vaisselle.
Vue d’ensemble
1. Panier supérieur
2. Brasdelavagesupérieur
3. Clayettes rabattables
4. Réglage hauteur du panier
5. Panier inférieur
6. Brasdelavageinférieur
7. Filtrelavage
8. Réservoir à sel
9. Bacsàproduitdelavageetréservoiràproduit
de rinçage
10.
Plaque signalétique
11. Bandeaudecommandes***
Touche et voyant Marche/
Pause
Voyant Sel
*
Voyant fin de
programme et départ
différé 9h.
Voyant séchage et
départ différé 6h.
Voyant lavage et
départ différé 3h.
Bouton
Sélection programme
Touche/Voyant
*
On-Off/Reset
Voyant produit
de rinçage*
Touche et voyant
Départ différé
Touche et voyant
Demi-charge
Poignée ouverture porte
20
FR
Sel régénérant et
Produit de rinçage
N’utiliser que des produits de lavage spéciaux lave-
vaisselle. N’utilisez pas de sel alimentaire ou industriel.
Se conformer aux instructions reportées sur l’emballage.
En cas d’utilisation d’un produit multifonction, nous
conseillons malgré tout d’ajouter du sel, surtout en cas d’eau
dure ou très dure.
(Seconformerauxinstructionsreportéessur
l’emballage).
Faute d’ajouter du sel ou du produit de rinçage, il est
normal que les voyants SEL* et PRODUIT DE RINCAGE*
restent allumés.
Charger le sel régénérant
L'utilisationdeselévitelaformationdeCALCAIREsurlavaisselle
et sur les composants fonctionnels du lave-vaisselle.
•Ilestimportantqueleréservoiràselnesoitjamaisvide.
•Ilestimportantdeprocéderauréglagedeladuretédel'eau.
Le réservoir à sel qui se trouve dans la partie inférieure du lave-
vaisselle
(voirDescription)
doit être rempli :
•quandlevoyantSEL* du bandeau s’allume ;
•quandleflotteurvert* qui se trouve sur le couvercle du sel
n'estplusvisible.
•voirautonomiedansletableaudeduretédel'eau.
1. Sortir le panier inférieur et dévisser le
couvercle du réservoir dans le sens inverse
des aiguilles d’une montre.
2. Lors de la première mise en service :
remplir le réservoir d’eau à ras bord.
3.Utiliserl’entonnoir
(voirfigure)
pour remplir
leréservoirde sel jusqu’au bord(1kg
environ);ilesttoutàfaitnormalquedel'eaudéborde.
4.Enleverl’entonnoir,éliminerlesrésidusdeselsurlefiletage.
Avant de revisser le couvercle, il faut le rincer à l’eau courante.
Nous conseillons d’effectuer cette opération à chaque
chargement de sel.
Fermersoigneusementlecouverclepouréviterqueduproduit
de lavage pénètre à l’intérieur du réservoir pendant le lavage
(celapourraitendommagerirrémédiablementl'adoucisseur).
Encasderajoutdesel,nousconseillonsd'effectuercette
opération avant de démarrer le lavage.
Réglage dureté de l’eau
Pourobtenir unfonctionnementparfaitdel'adoucisseuranti-
calcaire, il faut absolument procéder à un réglage selon la dureté
del'eaudel'appartement.Serenseignerauprèsdel’organisme
distributeur de l’eau. La valeur sélectionnée correspond à une
dureté moyenne.
•AppuyersurlatoucheON/OFFpourmettrelelave-vaisselle
sous tension
•AppuyersurlatoucheON/OFFpouréteindre
•Garderla toucheSTART/PAUSEenfoncée pendant 5
secondes.
•AppuyersurlatoucheON/OFFpourallumer
•Levoyantselclignote(lenombredeclignotementscorrespond
à la sélection courante).
•Tournerleboutonsur lenumérocorrespond auniveau de
dureté désiré
(voirtableaudureté).
•AppuyersurlatoucheON/OFFpouréteindre
•Réglageeffectué!
(°dH=duretéendegrésallemands-°fH=duretéendegrés
français-mmol/l=millimole/litre)
Charger le produit de rinçage
LeproduitderinçageaideauSÉCHAGEdelavaisselle.Ilfaut
remplir le réservoir à produit de rinçage :
• quandlevoyantPRODUITDERINÇAGE*s'allumesurle
bandeau/écran.
• quandl'indicateuroptique* situé sur le couvercle du réservoir
« D », passe de foncé à transparent.
1.Ouvrirle réservoir « D » en poussant et en soulevant la
languette sur le couvercle ;
2.Introduireleproduit de rinçageavecprécautionjusqu'au
niveaumaximaldel'ouverturederemplissageenévitanttout
débordement.Sicela se produit, nettoyeraussitôtavec un
chiffon sec.
3.Fermerlecouverclejusqu'audéclic.
Ne JAMAIS verser le liquide de rinçage directement à
l'intérieur de la cuve.
Régler la dose de produit de rinçage
Si le résultat du séchage n’est pas satisfaisant, le dosage du
produit de rinçage peut être réglé.
•AppuyersurlatoucheON/OFFpourmettrelelave-vaisselle
sous tension
•AppuyersurlatoucheON/OFFpouréteindre
•Appuyer3foisdesuitesurlatoucheSTART/PAUSE
•AppuyersurlatoucheON/OFFpourallumer
•Le voyant du produit de rinçage clignote un nombre de fois
équivalent au niveau sélectionné.
•Tournerleboutonsurlenumérocorrespondàlaquantitéde
produit de rinçage devant être débitée.
•AppuyersurlatoucheON/OFFpouréteindre
•Réglageeffectué!
Le niveau de dosage du produit de rinçage peut être réglé sur
ZÉRO,danscecas,leproduitderinçageneserapasdébitéet
levoyantproduitderinçagenes'allumerapasencasd'absence
de ce dernier.
Possibilitédesélectionnerjusqu'à4niveauxmaximumselonle
modèle de lave-vaisselle. La valeur sélectionnée correspond à
un niveau moyen.
• silavaisselleprésentedestracesbleuâtres,réglersurdes
chiffresplusbas(1-2).
• s’ilyadesgouttesd’eauoudestachesdecalcairesurla
vaisselle,réglersurdeschiffresplusélevés(3-4).
Tableau de dureté de l’eau
Autonomie moyenne
réservoir à sel avec 1
lavage par jour
niveau
°dH °fH mmol/l mois
1 0 - 6 0 - 10 0 - 1 7 mois
2 6 - 11 11 - 20 1,1 - 2 5 mois
3 12 - 17 21 - 30 2,1 - 3 3 mois
4 17 - 34 31 - 60 3,1 - 6 2 mois
5
*
34 - 50 61 - 90 6,1 - 9 2/3 semaines
De 0°f à 10°f nous vous conseillons de ne pas utiliser de sel.
* La sélection 5 peut prolonger la durée.
* Présent uniquement sur certains modèles.
M
A
X
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Hotpoint HSB 7M124 X EU Mode d'emploi

Catégorie
Lave-vaisselle
Taper
Mode d'emploi
Ce manuel convient également à

dans d''autres langues