STIHL FSE 60 Manuel utilisateur

Marque: STIHL

Modèle: FSE 60

Catégorie: Coupe-herbe

Taper: Manuel utilisateur

{

STIHL FSE 60

Instruction Manual

Notice d’emploi

G Instruction Manual

1 - 19

F Notice d’emploi

20 - 39

Original Instruction ManualPrinted on chlorine-free paper

Printing inks contain vegetable oils, paper can be recycled.

0458-238-8221. VA3.F18.

0000000135_010_GB

FSE 60

English

{

with electronic systems.

Contents

Dear Customer,

Thank you for choosing a quality

engineered STIHL product.

It has been built using modern

production techniques and

comprehensive quality assurance.

Every effort has been made to ensure

your satisfaction and trouble-free use of

the product.

Please contact your dealer or our sales

company if you have any queries

concerning this product.

Your

Dr. Nikolas Stihl

Guide to Using this Manual 2

Safety Precautions and Working

Techniques 2

Using the Unit 7

Approved Combinations of Cutting

Attachment, Deflector, Handle and

Harness 8

Mounting the Drive Tube 9

Mounting the Loop Handle 9

Mounting the Deflector 10

Mounting the Cutting Attachment 10

Connecting to Power Supply 11

Fitting the Harness 12

Switching On 12

Switching Off 13

Storing the Machine 13

Maintaining the Mowing Head 13

Maintenance and Care 16

Main Parts 17

Specifications 18

Maintenance and Repairs 19

Disposal 19

FSE 60

English

Pictograms

All the pictograms attached to the

machine are shown and explained in this

manual.

Symbols in text

WARNING

Warning where there is a risk of an

accident or personal injury or serious

damage to property.

NOTICE

Caution where there is a risk of

damaging the machine or its individual

components.

Engineering improvements

STIHL's philosophy is to continually

improve all of its products. For this

reason we may modify the design,

engineering and appearance of our

products periodically.

Therefore, some changes, modifications

and improvements may not be covered

in this manual.

Observe all applicable local safety

regulations, standards and ordinances.

If you have not used this model before:

Have your dealer or other experienced

user show you how to operate your

machine or attend a special course in its

operation.

Minors should never be allowed to use

this product.

Keep bystanders, especially children,

and animals away from the work area.

When the machine is not in use, store it

so that it does not endanger others.

Secure it against unauthorized use,

disconnect the plug from the power

supply.

The user is responsible for avoiding

injury to third parties or damage to their

property.

Do not lend or rent your unit without the

instruction manual. Be sure that anyone

using it understands the information

contained in this manual.

Persons who are not able to operate the

power tool safely due to limited physical,

sensory or mental ability may work with

it only under supervision or after being

instructed appropriately by a

responsible person.

The use of noise emitting power tools

may be restricted to certain times by

national or local regulations.

Before each use, check that your power

tool is in good condition. Pay special

attention to the power cord, mains plug

and safety devices.

Do not use the power cord to pull or

carry the power tool.

Disconnect plug from wall outlet before

performing any work on the machine,

e.g. cleaning, maintenance, replacing

parts.

The deflector on this power tool cannot

protect the operator from all objects

thrown by the cutting attachment

(stones, glass, wire, etc.). Such objects

may ricochet and then hit the operator.

Do not use a pressure washer to clean

the unit. The solid jet of water may

damage parts of the unit.

Do not spray the power tool with water.

Physical Condition

To operate this power tool you must be

rested, in good physical condition and

mental health.

Guide to Using this Manual Safety Precautions and

Working Techniques

Some special safety pre

cautions must be

observed when working

with this power tool

because of the very high

speed of its cutting

attachment and the fact

that it is powered by

electricity.

It is important that you

read the instruction man

ual before first use and

keep it in a safe place for

future reference. Non-

observance of the

instruction manual may

result in serious or even

fatal injury.

FSE 60

English

If you have any condition that might be

aggravated by strenuous work, check

with your doctor before operating a

power tool.

Do not operate the power tool if you are

under the influence of any substance

(drugs, alcohol) which might impair

vision, dexterity or judgment.

Accessories and Spare Parts

Only use cutting attachments and

accessories that are explicitly approved

for this power tool by STIHL or are

technically identical. If you have any

questions in this respect, consult a

servicing dealer. Use only high quality

tools and accessories in order to avoid

the risk of accidents and damage to the

unit.

STIHL recommends the use of genuine

STIHL tools and accessories. They are

specifically designed to match the

product and meet your performance

requirements.

Never attempt to modify your machine in

any way since this may increase the risk

of personal injury. STIHL excludes all

liability for personal injury and damage

to property caused while using

unauthorized attachments.

Applications

Depending on the cutting attachment

fitted, use your trimmer only for cutting

grass, wild growth and similar materials.

Do not use the machine for any other

purpose because of the increased risk of

accidents and damage to the machine.

Never attempt to modify the product in

any way since this may result in

accidents or damage to the product.

Clothing and Equipment

Wear proper protective clothing and

equipment.

Avoid clothing that could get caught on

branches or brush or moving parts of the

machine. Do not wear a scarf, necktie or

jewelry. Tie up and confine long hair

(e.g. with a hair net, cap, hard hat, etc.).

WARNING

Wear a face shield and make sure it is a

good fit. A face shield alone does not

provide adequate eye protection.

Wear hearing protection, e.g. earplugs

or ear muffs.

STIHL offers a comprehensive range of

personal protective clothing and

equipment.

Transporting the Power Tool

Always switch off the power tool and

unplug it from the power supply.

Carry the unit hanging from the shoulder

strap or properly balanced by the drive

tube or loop handle.

Transporting by vehicle: Properly secure

the power tool to prevent turnover and

damage.

Before Starting Work

Inspect the power tool.

Check that your power tool is properly

assembled and in good condition – refer

to appropriate chapters in the instruction

manual.

– Starting lockout lever and trigger

switch must move freely – the switch

must return to the idle position when

it is released.

– Use only an approved combination

of cutting attachment, deflector,

handle and harness. All parts must

be assembled properly and

securely. To reduce the risk of

injury, never use metal cutting

attachments.

Clothing must be sturdy

but allow complete free

dom of movement. Wear

snug-fitting clothing, an

overall and jacket combi

nation, do not wear a

work coat.

Wear sturdy shoes with

non-slip soles.

To reduce the risk of eye

injuries, wear snug-fitting

safety glasses in accord

ance with European

Standard EN166. Make

sure the safety glasses

are a good fit.

Wear robust work gloves

made of durable material

(e.g. leather).

FSE 60

English

– Check that the cutting attachment is

properly and securely mounted and

in good condition.

– Check protective devices (e.g.

deflector for cutting attachment) for

damage or wear. Always replace

damaged parts. Never operate the

unit with a damaged deflector.

– Keep the handles dry and clean –

free from oil and dirt – for safe

control of the power tool.

– Adjust handle to suit your height and

reach.

To reduce the risk of accidents, do not

operate the unit if it is not properly

assembled and in good condition.

Do not operate your power tool if any of

its components are damaged or not

properly mounted.

Never attempt to modify the controls or

the safety devices in any way.

Before switching on your power tool,

make sure the cutting attachment is not

touching the ground or any other object.

Electrical Connection.

Reduce the risk of electric shock:

– Voltage and frequency of the power

tool (see rating plate) and the

voltage and frequency of your

power supply must be the same.

– Check the connecting cord, plug

and extension cord for damage.

Never use damaged cords,

couplings and plugs or connecting

cords that do not comply with

regulations.

– Always connect the power tool to a

properly installed wall outlet.

– Check that the insulation of the

power cord, extension cord, plug

and coupling is in good condition.

– Never touch the mains plug,

connecting cord, extension cord or

electrical connections with wet

hands.

– Make sure the extension cord used

complies with the regulations for the

intended application.

Position the connecting and extension

cords correctly:

– Check minimum cross section of

wires (wire gauge) – see

"Connecting to Power Supply".

– To reduce the risk of stumbling,

position and mark the connecting

cord so that it cannot be damaged

or endanger others.

– Using unsuitable extension cords

can be dangerous. Use only

extension cords approved for

outdoor use which are labeled as

such and have the appropriate wire

gauge.

– The plug and coupling of the

extension cord must be water-proof

and must never be immersed in

water.

– Do not chafe on edges, pointed or

sharp objects

– Do not squeeze through gaps in

doors or windows

– If cords are twisted – unplug the

power tool and straighten them out

– Never touch the rotating cutting

attachment

– Always unwind the extension cord

completely from the cable drum to

reduce the risk of fire from

overheating.

Holding and Controlling the Power Tool

Always hold the unit firmly with both

hands on the handles. Make sure you

always have good balance and secure

footing.

Always hold the machine on the right-

hand side of your body.

Left hand on loop handle, right hand on

control handle, even if you are left-

handed.

To reduce the risk of

injury, avoid contact with

the cutting attachment.

Note that the cutting

attachment continues to

run for a short period

after the power tool is

switched off – flywheel

effect.

002BA117 KN

FSE 60

English

During Operation

Avoid damage to the power supply cord.

Do not drive over it, pinch or tug it.

Never jerk the connecting cord to

disconnect it from the wall outlet. To

unplug, grasp the plug, not the cord.

Be sure your hands are dry before

touching the plug or power cord.

Never spray water on the unit – risk of

short circuit!

Do not leave the power tool outdoors in

the rain.

In case of imminent danger or in an

emergency, switch off the motor

immediately – release the trigger switch

and starting lockout.

Your power tool is designed to be

operated by one person only. Do not

allow other persons in the work area.

The cutting attachment may catch and

fling objects a great distance and cause

injury - therefore, do not allow any other

persons within a radius of 15 meters of

your own position. To reduce the risk of

damage to property, also maintain this

distance from other objects (vehicles,

windows). Even maintaining a distance

of 15 meters or more cannot exclude the

potential danger.

To reduce the risk of injury from thrown

objects, never operate the power tool

without the proper deflector for the type

of cutting attachment being used.

Do not cut wet grass.

Take care in slippery conditions on

slopes and uneven ground.

Keep the connecting cord behind the

power tool at all times – do not walk

backwards – risk of stumbling.

Watch out for obstacles: Roots and tree

stumps which could cause you to trip or

stumble.

Always stand on the ground while

working, never on a ladder, work

platform or any other insecure support.

Be particularly alert and cautious when

wearing hearing protection because

your ability to hear warnings (shouts,

alarms, etc.) is restricted.

To reduce the risk of accidents, take a

break in good time to avoid tiredness or

exhaustion.

Work calmly and carefully – in daylight

conditions and only when visibility is

good. Stay alert so as not to endanger

others.

Special care must be taken when

working in difficult, over-grown terrain.

When cutting high scrub, under bushes

and hedges: Keep cutting attachment at

a minimum height of 15cm to avoid

harming small animals.

Check the cutting attachment at regular

short intervals during operation or

immediately if there is a noticeable

change in cutting behavior:

– Switch off the power tool, hold it

firmly and press the cutting

attachment into the ground to bring

it to a standstill, and disconnect the

plug from the power supply.

– Check condition and tightness, look

for cracks.

– Replace damaged cutting

attachments immediately, even if

they have only superficial cracks.

– Clean grass and plant residue off

the cutting attachment mounting at

regular intervals – remove any build

up of material from the cutting

attachment and deflector.

Always switch off the power tool and

unplug it from the power supply before

replacing the cutting attachment This

avoids the risk of injury from the motor

starting unintentionally.

If the power supply cord

is damaged, immediately

disconnect the plug from

the wall outlet to avoid

the risk of electric shock.

The drive motor is not

waterproof. To reduce

the risk of a short circuit

or electrocution, never

work with the power tool

in the rain or in wet or

very damp locations.

15m (50ft)

Inspect the work area:

Stones, pieces of metal

or other solid objects may

be thrown more than 15

meters and cause per

sonal injury or damage

the cutting attachment

and property (e.g. parked

vehicles, windows).

FSE 60

English

Do not continue using or attempt to

repair damaged or cracked cutting

attachments by welding, straightening or

modifying the shape (out of balance).

This may cause parts of the cutting

attachment to come off and hit the

operator or bystanders at high speed

and result in serious or fatal injuries.

Use only the deflector with properly

mounted line limiting blade to ensure the

mowing lines are automatically trimmed

to the approved length.

To reduce the risk of injury, avoid

contact with the blade.

To reduce the risk of injury, always

switch off the power tool and unplug it

from the power supply before manually

adjusting the nylon line.

Using the unit with over-long nylon

cutting lines reduces the motor's

operating speed. This results in

overheating and damage to the motor.

To reduce the risk of injury, never use

wire in place of the nylon cutting line.

If your power tool is subjected to

unusually high loads for which it was not

designed (e.g. heavy impact or a fall),

always check that it is in good condition

before continuing work – see also

"Before Starting Work". Make sure the

safety devices are working properly. Do

not continue operating your power tool if

it is damaged. In case of doubt, consult

your servicing dealer.

Before leaving the power tool

unattended: Switch it off and disconnect

the plug from the power supply.

Vibrations

Prolonged use of the power tool may

result in vibration-induced circulation

problems in the hands (whitefinger

disease).

No general recommendation can be

given for the length of usage because it

depends on several factors.

The period of usage is prolonged by:

– Hand protection (wearing warm

gloves)

– Work breaks

The period of usage is shortened by:

– Any personal tendency to suffer

from poor circulation (symptoms:

frequently cold fingers, tingling

sensations).

– Low outside temperatures.

– The force with which the handles

are held (a tight grip restricts

circulation).

Continual and regular users should

monitor closely the condition of their

hands and fingers. If any of the above

symptoms appear (e.g. tingling

sensation in fingers), seek medical

advice.

Maintenance and Repairs

Always switch off the machine and

disconnect the plug from the power

supply before carrying out any

maintenance work to reduce the risk of

injury from the motor starting

unintentionally.

Service the machine regularly. Do not

attempt any maintenance or repair work

not described in the instruction manual.

Have all other work performed by a

servicing dealer.

STIHL recommends that you have

servicing and repair work carried out

exclusively by an authorized STIHL

servicing dealer. STIHL dealers are

regularly given the opportunity to attend

training courses and are supplied with

the necessary technical information.

Only use high-quality replacement parts

in order to avoid the risk of accidents

and damage to the machine. If you have

any questions in this respect, consult a

servicing dealer.

STIHL recommends the use of genuine

STIHL replacement parts. They are

specifically designed to match your

machine model and meet your

performance requirements.

Never attempt to modify your power tool

in any way since this will increase the

risk of personal injury.

Regularly check that the insulation of the

power cord and plug is in good condition

and shows no sign of ageing

(brittleness).

Electrical components, e.g. power cord,

may only be repaired or replaced by a

qualified electrician.

Clean plastic components with a cloth.

Do not use aggressive detergents. They

may damage the plastic.

Do not spray the machine with water.

Check tightness of mounting screws on

safety devices and the cutting

attachment and retighten if necessary.

FSE 60

English

Clean cooling air inlets in motor housing

as necessary.

Store the machine is a safe and dry

place.

Mowing

N Hold your trimmer with both hands –

right hand on the control handle –

left hand on the loop handle.

N Stand upright – hold the unit in a

relaxed position and always on right

side of your body.

N Swing the trimmer steadily to the left

and right like a scythe, while

maintaining the required cutting

height.

N Avoid contact with fences, walls,

rocks, etc. since it will result in a

higher rate of wear.

Disposal

Do not throw cuttings in the garbage can

– they can be composted!

Using the Unit

282BA011 KN

FSE 60

English

Approved Combinations

Select correct combination from the

table according to the cutting

attachment you intend to use.

WARNING

For safety reasons no other

combinations are permitted – risk of

accidents.

Only mowing heads (1,2) may be used

on trimmers with a curved drivetube

and loop handle.

Cutting Attachments

Mowing heads

1 STIHL AutoCutC52

2 STIHL AutoCutC6

Deflector

3 Deflector with blade for mowing

heads

Handle

4 Loop handle

Harness

5 Shoulder strap may be used

Approved Combinations of Cutting Attachment, Deflector, Handle and Harness

Cutting Attachment Deflector Handle Harness

282BA010-A1

Schnur/LINE 2

Schnur/LINE 1

FSE 60

English

N Pull the protective cap off the drive

tube.

N Push the drive tube(1) into the

motor housing(2) as far as the mark

(A), turning the drive tube back and

forth at the same time.

N Tighten down the screw(3) in the

housing firmly.

Mounting the Loop Handle

N Fit the loop handle(1) on the drive

tube at a distanceA of about 30cm

from the control handle(2).

N Insert the hex nut(3) in the loop

handle(1).

N Squeeze the ends of the clamp

together, fit the M6x40 screw(4)

with washer(5) from the other side

and tighten down firmly.

Adjusting Loop Handle to Most

Comfortable Position

N Loosen the screw(4).

N Move the loop handle(1) along the

drive tube to the required position –

tighten down the screw(4) firmly.

Mounting the Drive Tube

238BA016 KN

Mounting the Loop Handle

282BA001 KN

40 mm

FSE 60

English

N Push the deflector(1) over the

clamp(2) as far as stop.

N Fit the locknut(3) in the hex recess

on the deflector.

N Make sure the holes line up.

N Insert the M6x30 screw(4) and

tighten it down firmly.

Placing Power Tool on the Ground

N Switch off the power tool.

N Lay your trimmer on its back with

the loop handle facing down and the

output shaft facing up.

Fitting Mowing Head without Screw

Mounting

Keep the instruction leaflet for the

mowing head in a safe place.

STIHL AutoCutC5-2

N Slip the mowing head(2) on to the

shaft – as AutoCut5-2.

N Turn the spool(9) clockwise until

the two arrow heads line up –

secure the spool in this position.

N Insert the cap(8) in the spool, press

it down as far as stop and turn it

clockwise at the same time.

N Turn the cap until you feel

resistance and then tighten it down

firmly by hand.

Mounting the Deflector

238BA003 KN

238BA004 KN

Mounting the Cutting

Attachment

238BA021 KN

681BA018 KN

Schnur/LINE 2

Schnur/LINE 1

FSE 60

English

STIHL AutoCutC6-2

N Slip the mowing head(2) over the

shaft(3) and engage its hex recess

on the external hexagon(4).

N Hold mowing head (2) steady with

one hand.

N Turn the cap (1) clockwise and

tighten it down firmly by hand.

Removing the Mowing Head

N Hold the mowing head steady.

N Unscrew the cap counterclockwise.

The voltage and frequency of the

machine (see rating plate) must match

the voltage and frequency of the power

connection.

The minimum fuse protection of the

power connection must comply with the

specifications – see "Specifications".

The machine must be connected to the

power supply via an earth-leakage

circuit breaker to disconnect the power

supply if the differential current to earth

exceeds 30mA.

The power connection must correspond

to IEC60364 and relevant national

regulations.

Extension Cords

120V version

230V version

N Insert the plug(1) into the extension

cord coupling(2).

Strain Relief

The strain relief (cord retainer) protects

the appliance cord against damage.

0000-GXX-3937-A0

Connecting to Power Supply

Minimum wire gauge for extension

cords for 120Volt appliances using

0

6amps:

Cord length(ft) 25 50 100 150

Wire size(AWG) 18 16 16 14

Minimum cross sectional area of wires:

Cord lengths of 6,5ft (2m) or more:

1,5mm

, type H07RN

238BA008 KN

FSE 60

English

N Make a loop(3) in the extension

cord.

N Pass the loop(3) through the

opening(4).

N Slip the loop(3) over the hook(5)

and pull it tight.

N Connect the extension cord plug to

a properly installed wall outlet.

A shoulder strap is available as a special

accessory.

Wear the shoulder strap over your left

shoulder and adjust its length so that the

spring hook lies against your right hip.

The open side of the hook should face

away from your body. Attach the spring

hook to the carrying ring (see "Main

Parts").

N Make sure you have a secure and

balanced footing.

N Hold your trimmer with both hands –

right hand on the control handle –

left hand on the loop handle.

N Stand upright – hold the trimmer in a

relaxed position and always on right

side of your body.

N The cutting attachment must not

touch the ground or any other

objects.

N Press down the starting lockout

lever(1) and hold it in that position.

N Squeeze the trigger switch(2).

238BA009 KN

Fitting the Harness Switching On

238BA010 KN

FSE 60

English

N Release the trigger switch and

starting lockout lever.

WARNING

Note that the cutting attachment

continues to run for a short period after

you let go of the throttle trigger and

starting lockout lever – flywheel effect.

During longer work breaks – disconnect

the plug from the power supply.

When the machine is not in use, shut it

off so that it does not endanger others.

Secure it against unauthorized use.

For periods of 3months or longer

N Thoroughly clean the machine,

especially the cooling air inlets.

N Take out the spool with nylon lines

and engage the ends of the lines in

the spool's notches. Clean and

inspect the spool.

The resilience and service life of the

nylon line can be increased by storing it

in a container filled with water.

N Store the machine in a dry, high or

locked location, out of the reach of

children and other unauthorized

persons.

Placing Power Tool on the Ground

N Switch off the power tool.

N Lay your trimmer on its back with

the loop handle facing down and the

output shaft facing up.

Switching Off Storing the Machine Maintaining the Mowing

Head

238BA021 KN

FSE 60

English

Adjusting Nylon Line

N Hold the rotating mowing head

above the ground – tap it on the

ground once – about 3cm fresh line

is advanced.

N The blade(1) on the deflector(2)

trims surplus line to the correct

length – avoid tapping the mowing

head more than once at a time.

Line feed operates only if both lines still

have a minimum length of 2.5cm.

If the line is shorter than 2.5cm:

WARNING

To reduce the risk of injury, always shut

off the engine before adjusting the

mowing line by hand.

N Lay your trimmer on its back, make

sure it is secure.

N Press down the cap on the spool as

far as stop.

N Pull the ends of the lines out of the

spool.

If the spool is empty, refill with nylon line.

Replacing Nylon Line

Always check the mowing head for signs

of wear before replacing the nylon line.

WARNING

If there are signs of serious wear,

replace the complete mowing head.

The nylon mowing line is referred to as

"nylon line" or "line" in the following.

The mowing head is supplied with

illustrated instructions for replacing the

nylon line. Keep the instructions for the

mowing head in a safe place.

N If necessary, remove the mowing

head.

STIHL AutoCutC5

Disassembling the mowing head and

removing remaining nylon line

In normal operation, the supply of nylon

line in the head is used up almost

completely.

N Hold the mowing head steady and

rotate the cap(1) counterclockwise

until it can be removed.

N Pull the spool(2) out of the mowing

head(3) and remove the remaining

line.

232BA007 KN

Schnur/LINE 1

681BA021 KN

FSE 60

English

Assembling the mowing head

N Fit the empty spool in the mowing

head.

If the spring(4) has popped out:

N push it into the spool(2) until it

engages in position with an audible

click.

N Mount the mowing head – see

"Mounting the Mowing Head".

Winding line onto spool

N Use green-coded nylon line with a

diameter of 2.0mm (0.08in).

N Cut two 2m (6ft 6in) lengths of

nylon line from the reel (special

accessory).

N Rotate the spool(2)

counterclockwise until the two arrow

points are in alignment.

N Push the straight end of each line

through one sleeve(5) in the

mowing head(3) until you feel a

noticeable resistance – and then

continue pushing as far as stop.

N Hold the mowing head steady.

N Rotate the spool counterclockwise

until the shortest line is about 10cm

(4in).

N If necessary, cut the longer line to a

length of about 10cm (4in).

The mowing head is now full.

Schnur/LINE 1

681BA022 KN

Schnur/LINE 2

681BA023 KN

Schnur/LINE 1

681BA024 KN

Schnur/LINE 2

Schnur/LINE 1

FSE 60

English

Maintenance and Care

The following intervals apply to normal operating conditions only. If your daily working time is longer or

operating conditions are difficult (very dusty work area, etc.), shorten the specified intervals

accordingly.

before starting work

after finishing work or daily

weekly

monthly

if problem

if damaged

if required

Complete machine

Visual inspection (condition) X

Clean X

Power cord

Check X

Have replaced by dealer

Switch, starting lockout

Check operation X

Have replaced by dealer

Cooling inlets Clean X

All accessible screws and nuts Retighten X

Cutting attachment (mowing head)

Visual Inspection X

Replace X

Check tightness X

Safety labels Replace X

STIHL recommends a STIHL servicing dealer.

FSE 60

English

1 Power Supply Cord

2 Cooling air intake slots

3 Trigger Switch

4 Starting Lockout Lever

5 Carrying Loop

6 Loop Handle

7 Drive Tube

8 Mowing Head

9 Line Length Limiter Blade

10 Deflector

11 Strain Relief

# Serial Number

Main Parts

238BA020 KN

FSE 60

English

Definitions

1 Power Supply Cord

Supplies electric to current motor.

2 Cooling air intake slots

Cooling air flows to the motor

through the slots.

3 Trigger Switch

To switch the machine "on" and

"off".

4 Starting Lockout Lever

Must be depressed before the

trigger switch can be activated.

5 Carrying Loop

The device to connect the trimmer

to the harness.

6 Loop Handle

For easy control of machine during

cutting work.

7 Drive Tube

Device to connect the engine with

the gearbox.

8 Mowing Head

The mowing head is intended to

supplement a lawn mower.

9 Line Length Limiter Blade

Metal piece in the deflector for

cutting off excess nylon line.

10 Deflector

The deflector is designed to reduce

the risk of injury from foreign objects

flung backwards toward the

operator by the cutting tool and from

contact with the cutting tool.

11 Strain Relief

Supports extension cord and

reduces the likelihood of

disconnection of extension cord

receptacles and trimmer plug.

Motor

FSE60, 120V version

FSE60, 230V version

Length

Specifications

Voltage: 120V

Frequency: 60Hz

Rated current: 5A

Power rating: 600W

Rated speed at mowing

line diameter of 14in

(350mm): 8,400rpm

Maximum motor speed

(without nylon line): 10,800rpm

Fuse: min.15A

Insulation: II,E

Voltage: 230V

Frequency: 50Hz

Rated current: 2.6A

Power rating: 600W

Rated speed at mowing

line diameter of 14in

(350mm): 8,000rpm

Maximum motor speed

(without nylon line): 10,000rpm

Fuse: min.10A

Insulation: II,E

FSE60: 60.2in (1530 mm)

La page charge ...

STIHL FSE 60 Manuel utilisateur

Marque: STIHL

Modèle: FSE 60

Catégorie: Coupe-herbe

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: STIHL FSE 60 User manual

STIHL FSE 60 Manuel utilisateur

STIHL FSE 60 Manuel utilisateur

dans d''autres langues

Documents connexes