SUGA SWN24EA-0 Manuel utilisateur

Taper
Manuel utilisateur

Ce manuel convient également à

Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
1
IEEE 802.11b/g/n (2T2R) WLAN Half-size
Mini PCIe Module User Manual
Model: SWN24EA-0
Version: 1.0
Date: Nov 24, 2015
Contents
1. FCC & IC Statement ...............................................................................................2
1.1. FCC Caution..................................................................................................2
1.2. FCC Radiation Exposure Statement ...........................................................2
1.3. IC Warning ....................................................................................................3
2. Hardware Installation .............................................................................................4
2.1. Hardware Installation Procedures ..............................................................4
3. Software Installation................................................................................................5
3.1. STA Linux driver installation ......................................................................5
4. Example.....................................................................................................................6
4.1. Router setting.................................................................................................6
4.2. Associate SWN24EA-0 with the router........................................................6
5. Device Labeling ........................................................................................................6
6. Disclaimer .................................................................................................................7
Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
2
1. FCC & IC Statement
1.1. FCC Caution
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
1.2. FCC Radiation Exposure Statement
IMPORTANT NOTE:
This equipment complies with FCC radiation exposure limits. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your body.
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC
compliance requirement of the end product, which integrates this module
The final end product must be labeled in a visible area with the following” Contains
FCC ID: VZFSWN24EA0
The device supports the highest gain of atenna is 4.0dBi.
Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
3
1.3. IC Warning
RSS (Category I Equipment):
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada.
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module
The final end product must be labeled in a visible area with the following” Contains
IC: 10609A-SWN24EA0
This radio transmitter (identify the device by certification number) has been approved by Industry
Canada to operate with the antenna types listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device.
Cetémetteurradio(identificationdel'appareilparnumérodecertification)aétéapprouvépar
IndustrieCanadapourfonctionneraveclestypesd'antennecidessousaveclemaximumdegain
admissibleindiqué.Typesd'antennenoninclusdanscetteliste,ayantungainsupérieuraugain
maximumindiquépourcetype,sontstrictementinterditspouruneutilisationaveccetappareil
The device supports the highest gain of antenna is 4.0dBi.
Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
4
2. Hardware Installation
2.1. Hardware Installation Procedures
2.1.1. Plug SWN24EA-0 module into the mini-PCIE slot of the desktop
computer with PCI-E 1X to Half-size Mini PCIE converter board installed, as
shown below).
Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
5
2.1.2. Connect one antenna to CON0 port, and connect another antenna to CON1 port,
as shown below.
3. Software Installation
3.1.
STA Linux driver installation
3.1.1. The desktop computer must install Linux system (Ubuntu 2.30.2, or
above)
3.1.2. Install MT7603E STA Linux driver (MT7603-STA-PCI-V3.0.0.0) into the
desktop computer, as shown below:
Open the terminal, input below commands:
# cd MT7603_wifi/DPA/os/linux
# sudo insmod mt7603e_sta.ko
# sudo ifconfig ra0 up
Note: Do not power off the desktop computer, otherwise, above commands
re-input is needed.
Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
6
4. Example: Associate SWN24EA-0 module with a router
for surfing the internet
4.1. Router setting
Connect the router to internet by WAN
SSID: ODMTEST
Mode: b/g/n mixed mode
Bandwidth: 20/40MHz Auto
Encryption: WPAPSK/AES
Password: odm0123456789
4.2. Associate SWN24EA-0 with the router
Open the terminal, input below commands:
# sudo iwpriv ra0 set NetworkType=Infra
# sudo iwpriv ra0 set AuthMode=WPAPSK
# sudo iwpriv ra0 set EncrypType=AES
# sudo iwpriv ra0 set SSID=ODMTEST
# sudo iwpriv ra0 set WPAPSK=odm0123456789
# sudo iwpriv ra0 set SSID=ODMTEST
# sudo ifconfig ra0 192.168.11.3 (IP according to the router LAN IP range )
Now you can enjoy your internet surfing.
5. Device Labeling
The host device containing this module must either:
(1). Make the module label visible so that the FCC/IC ID is visible in the end
construction.
(2). Label the end product with the FCC ID and IC ID of the module. For example:
“Contain FCC ID: VZFSWN24EA0” and “Contain IC: 10609A-SWN24EA0”.
Suga Electronics Limited
© Suga Electronics Limited. All Rights Reserved.
Information in this document is subject to change without prior notice.
7
6. Disclaimer
Suga Electronics Limited assumes no responsibility for errors or omissions in the
materials available on this Document.
THESE MATERIALS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED , INCLUDING
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
NON-INFRINGEMENT.
SugaE uses reasonable efforts to include accurate and up-to-date information on this
Document; it does not, however, make any representations as to its accuracy or
completeness of the information, text, graphics, links or other items contained within
these materials. Your use of this Document is at your own responsibility. SugaE,
its suppliers, and other parties involved in creating and delivering this Document’s
contents shall not be liable for any special, indirect, incidental, or consequential
damages, including without limitation, lost revenues or lost profits.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

SUGA SWN24EA-0 Manuel utilisateur

Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues