Bestway 56217E Le manuel du propriétaire

Marque: Bestway

Modèle: 56217E

Catégorie: Accessoires de piscine hors terre

Taper: Le manuel du propriétaire

Item

56217E

Aged

Over 2 years

MY FIRST FRAME POOL

OWNER’S MANUAL

Read and Follow All Safety Information and

Instructions.

Keep for future reference.

Failure to follow these warnings and instructions

can result in serious injury or death to users,

especially children.

Prevent Young Children From Drowning:

Install fencing or approved barrier around all sides of pool.

State or local laws or codes may require fencing or other approved barriers.

Check state or local laws and codes before setting up pool.

Drowning occurs silently and quickly. Assign an adult to supervise pool and

wear provided water watcher tag.

Keep children in your direct sight when they are in or near pool and when you

are filling and emptying pool.

When searching for a missing child, check pool first, even if you think your

child is in the house.

Pool presents a drowning hazard even during filling and draining of the pool.

Maintain constant supervision of children and do not remove any safety

barriers until the pool is completely empty and stowed away.

Refer to the list of barrier recommendations and guidelines as described in

CPSC Publication No.362.

Assign an adult to be responsible for watching children in the pool. Give this

person a “water watcher” tag and ask that they wear it the entire time they are

in charge of supervising children in the pool. If they need to leave for any

reason, ask this person to pass the “water watcher” tag and the supervision

responsibility to another adult.

Prevent Young Children From Gaining Access to Pool:

Remove pool ladders before leaving pool. Toddlers can climb ladder and get

into pool.

Position furniture away from pool so that children cannot climb and gain

access to pool.

When leaving pool, remove floats and toys from pool that might attract a child.

Be Prepared to Respond to an Emergency:

Keep a working phone and list of emergency numbers near pool.

Become certified in cardiopulmonary resuscitation (CPR) so you can respond

to an emergency.

Diving Risk:

Do not dive into the pool. Diving into shallow water can result in a broken

neck, paralysis, or death.

Electrocution Risk:

Keep all electrical lines, radios, speakers and other electrical appliances away

from the pool.

Do not place pool near or under overhead electrical lines.

Safety Barrier Guidelines for Residential Swimming Pool

Section I: Outdoor swimming pool

An outdoor swimming pool, including an inground, aboveground, or onground

pool, hot tub, or spa, should be provided with a barrier which complies with

the following:

1. The top of the barrier should be at least 48 inches above grade measured

on the side of the barrier which faces away from the swimming pool. The

maximum vertical clearance between grade and the bottom of the barrier

should be 4 inches measured on the side of the barrier which faces away

from the swimming pool. Where the top of the pool structure is above

grade, such as an aboveground pool, the barrier may be at ground level,

such as the pool structure, or mounted on top of the pool structure. Where

the barrier is mounted on top of the pool structure, the maximum vertical

clearance between the top of the pool structure and the bottom of the

barrier should be 4 inches.

2. Openings in the barrier should not allow passage of a 4-inch diameter

sphere.

3. Solid barriers, which do not have openings, such as a masonry or stone

wall, should not contain indentations or protrusions except for normal

construction tolerances and tooled masonry joints.

4. Where the barrier is composed of horizontal and vertical members and the

distance between the tops of the horizontal members is less than

45 inches, the horizontal members should be located on the swimming

pool side of the fence. Spacing between vertical members should not

exceed 1-3/4 inches in width. Where there are decorative cutouts, spacing

within the cutouts should not exceed 1-3/4 inches in width.

5. Where the barrier is composed of horizontal and vertical members and

the distance between the tops of the horizontal members is 45 inches or

more, spacing between vertical members should not exceed 4 inches.

Where there are decorative cutouts, spacing within the cutouts should not

exceed 1-3/4 inches in width.

6. Maximum mesh size for chain link fences should not exceed 1-3/4 inch

square unless the fence is provided with slats fastened at the top or the

bottom which reduce the openings to no more than 1-3/4 inches.

7. Where the barrier is composed of diagonal members, such as a lattice

fence, the maximum opening formed by the diagonal members should be

no more than 1-3/4 inches.

8. Access gates to the pool should comply with Section I, Paragraphs 1

through 7,and should be equipped to accommodate alocking device.

Pedestrian access gates should open outward, away from the pool, and

should be self-closing and have a self-latching device. Gates other than

pedestrian access gates should have a self-latching device. Where the

release mechanism of the self-latching device is located less than

54 inches from the bottom of the gate, (a) the release mechanism should

be located on the pool side of the gate at least 3 inches below the top of

the gate and (b) the gate and barrier should have no opening greater than

1/2 inch within18 inches of the release mechanism.

9. Where a wall of a dwelling serves aspart of the barrier, one of the

following should apply:

(a) All doors with direct access to the pool through that wall should be

equipped with an alarm which produces an audible warning when the

door and its screen, if present, are opened. The alarm should sound

continuously for a minimum of 30 seconds within 7 seconds after the

door is opened. Alarms should meet the requirements of UL2017

General-Purpose Signaling Devices and Systems, Section 77. The

alarm should have a minimum sound pressure rating of 85 dBA at 10

feet and the sound of the alarm should be distinctive from other

household sounds, such as smoke alarms, telephones, and door bells.

The alarm should automatically reset under all conditions. The alarm

should be equipped with manual means, such as touchpads or

switches, to temporarily deactivate the alarm for a single opening of

the door from either direction. Such deactivation should last for

nomore than 15 seconds. The deactivation touchpads or switches

should be located at least 54 inches above the threshold of the door.

(b) The pool should be equipped with a power safety cover which

complies with ASTM F1346-91 listed below.

devices, are acceptable so long as the degree of protection afforded is

not less than the protection afforded by (a) or (b) described above.

10. Where an aboveground pool structure is used as a barrier or where the

barrier is mounted on top of the pool structure, and the means of access is

a ladder or steps, then (a) the ladder to the pool or steps should be

capable of being secured, locked or removed to prevent access, or (b) the

ladder or steps should be surrounded by a barrier which meets Section I,

Paragraphs 1 through 9. When the ladder or steps are secured, locked, or

removed, any opening created should not allow the passage of a 4-inch

diameter sphere.

Section II: Barrier Locations

Barriers should be located so as to prohibit permanent structures, equipment

or similar objects from being used to climb the barriers.

Refer to the item name or number stated on the packaging.

Packaging must be read carefully and kept for future reference.

Prevent Drowning

WARNING

Children under 5,

especially toddlers are at

highest risk of drowning.

Closely watch children

who are in or near this

pool. Empty pool or

prevent access when not

in use.

WARNING

You can break your

neck and be

paralyzed!

No Diving

Keep all electrical lines,

radios, speakers, and

other electrical devices

away from pool.

Do not place pool near

or under overhead

electrical lines.

Electrocution Risk

WARNING

PARTS

Repair Patch

Liner

PREPARATION

Installation of small swimming pool usually takes only 10 minutes with 1

people.

Recommendations regarding placement of the pool:

Do not install the pool on a slope or inclined surfaces, on soft or loose soil

conditions (such as sand or mud), or on an elevated surface such as a deck,

platform or balcony, which may collapse under the weight of the filled pool.

• It is essential the pool is set up on solid, level ground. If the pool is set up on

uneven ground it can cause collapse of the pool and flooding, causing

serious personal injury and/or damage to personal property.

• Do not set up on driveways, decks, platforms, gravel or asphalt. Ground

should be firm enough to withstand the pressure of the water; mud, sand,

soft / loose soil or tar are not suitable.

• The ground must be cleared of all objects and debris including stones and

twigs.

• Check with your local city council for by-laws relating to fencing, barriers,

lighting and safety requirements and ensure you comply with all laws.

Drawings may not reflect actual product, not scaled to size.

Ref

Top Rail A

Top Rail B

Vertical Pool Leg

Corner

Footing

Description

Pool Size & Quantity

48 in. x 48 in. x 12 in.

(1.22 m x 1.22 m x 30.5 cm)

STRUCTURE PHOTO:

Fig. 1 Fig. 2

Fig. 3

Fig. 4

DISMANTLING

Open water valve on the bottom of the pool, water will drain automatically.

(Check local regulations for drainage by-laws). Then dismantle the frame of

the pool to release the water. Make sure release all the water in 20 minutes.

NOTE: Drain by adult only!

2. Open the air valve on the top ring to deflate.

3. Air dry pool.

ATTENTION: Do not leave the drained pool outside.

REPAIR

If your pool is damaged, use the provided repair patch.

1. Clean area to be repaired.

2. Carefully peel patch.

3. Press patch over area to be repaired.

4. Wait 30 minutes before inflation.

POOL MAINTENANCE

WARNING: If you do not adhere to the maintenance guidelines covered

herein, your health might be at risk, especially that of your children.

1. Change the water of pools frequently (particularly in hot weather) or when

noticeably contaminated, unclean water is harmful to the user’s health.

2. Please contact your local retailer to obtain chemicals to treat the water in

your pool. Be sure to follow the chemical manufacturer’s instructions.

3. Proper maintenance can maximize the life of your pool.

4. See packaging for water capacity.

CLEANING AND STORAGE

1. After deflation, use a damp cloth to gently clean all surfaces.

NOTE: Never use solvents or other chemicals that may damage the product.

2. Remove all the accessories and spare parts of the pool and store them

clean and dry.

3. Once pool is completely dry, sprinkle with talcum powder to prevent pool

from sticking together, fold pool carefully. If pool is not completely dry,

mould may result and will damage the pool liner.

4. Store liner and accessories in a cool, dry place out of children’s reach, with

a moderate temperature between 5°C / 41°F and 38°C / 100°F.

5. During the rainy season, pool and accessories should be stored as

instructed above.

6. Unproper draining of the pool might cause serious personal injury and/or

damage to personal property.

7. Check the product for damage at the beginning of each season and at

regular intervals when in use.

INSTALLATION

Assembly can be completed without tools.

WARNING: Assembly by an adult.

NOTE: It is important to assemble pool in the order shown below.

303021277986

Trademarks used in some countries under license from/

Marques utilisées dans certains pays sous la licence de/

Marcas comerciales utilizadas en algunos países bajo la licencia de/

Die Warenzeichen werden in einigen Ländern verwendet unter Lizenz der/

Marchi utilizzati in alcuni paesi concessi in licenza a

Bestway Inflatables & Material Corp., Shanghai, China

Manufactured, distributed and represented in the European Union by/

Fabriqués, distribués et représentés dans l’Union Européenne par/Fabricado,

distribuido y representado en la Unión Europea por/

Hergestellt, vertrieben und in der Europäischen Union vertreten von/Prodotto,

distribuito e rappresentato nell'Unione Europea da

Bestway (Europe) S.r.l., Via Resistenza, 5, 20098 San Giuliano Milanese (Milano),

Italy

Distributed in Latin America by/Distribué en Amérique latine par/Distribuido en

Latinoamérica por/Distribuído na América Latina por

Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea,

Pudahuel, Santiago, Chile

Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104

Carnarvon St Silverwater, NSW 2128, Australia

Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101

Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road,

Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL

Exported by/Exporté par/Exportado por/Exportiert von/Esportato da

Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited

Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon,

Hong Kong

Tel: +86 21 69135588 (For U.S. and Canada)

www.bestwaycorp.com

1. Find solid, level ground and clear it of debris.

ATTENTION: Do not set up the pool under cables or under trees.

2. Spread out the pool and make sure it is right side up.

3. Cover the water valve.

4. Assemble the top rails. Connect Top Rail A to Top Rail B, and slide into the

pole sleeve (Fig.1). Please see the structure photo for detailed directions.

Make sure the top rails’ ends are in right position.

5. At the corners, insert the Top Rails (A & B) into the Corners (D). Ensure

the spring-loaded pins snap into the pre-drilled holes. (Fig. 2)

Insert the Vertical Pool Legs (C) into the bottom of the Corners (D). (Fig. 3)

7. Attach all Footings (E) to the bottom of the Vertical Pool Legs (C). (Fig. 4)

8. Test the Frame to ensure all connections are secure before filling wit

water.

9. Put 1in. to 2in. (2.5cm to 5cm) of water in the pool to cover the floor. Once

pool floor is slightly covered, gently smooth out all wrinkles. Start in the

center of the pool and work your way clockwise to the outside.

10. Continue to fill the pool until the water reaches the welding line located

1.2in.-3.1in. (3cm-8cm) from the top of the pool. Please kindly pay the

upmost attention to not over fill the pool for security reasons.

1.2in.-3.1in.

(3cm-8cm)

Bestway 56217E Le manuel du propriétaire

Marque: Bestway

Modèle: 56217E

Catégorie: Accessoires de piscine hors terre

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Bestway 56217E Owner's manual

Bestway 56217E Le manuel du propriétaire

Bestway 56217E Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents