Spectrum Industries 55472-ABD Manuel utilisateur

Marque: Spectrum Industries

Modèle: 55472-ABD

Catégorie: Chariots de gestion d'appareils portables

Taper: Manuel utilisateur

55472

Page 1 of 11revised 7/22/19

Pro32™ Notebook Cart

Technical Specications

Power-side

Use the Pro32 Cart to store, transport, and charge up to 32 notebooks or laptops. A current-sensing timer provides adaptive

switching. Padded shelves and flexible dividers protect the notebooks. The overhead wire management aids the wiring integra-

tion and allows the charging plugs to hang in front of each laptop. The cart’s compact footprint and handle provide easy mobil-

ity. The Pro32 Cart is made with heavy-gauge steel for security and powder-coated for a durable, long-lasting finish. A dual-bolt

lock with hasp on the doors increase security of the notebooks.

Features and Benets

• Stores, charges, and transports up to 32 of the largest notebooks

(laptops) commonly used in education

• 1.625”W x 17.375”D x 12.3438”H storage bay

• Small cart footprint (30.75”W x 28”D) saves valuable space

• Durable ABS plastic dividers protect notebooks from scratching

(dividers are removable to provide storage space for thicker devices)

• Dual doors provide easy access while reducing space necessary for

swing radius

• Double bolt keyed locks and heavy-gauge steel doors provide security

• Hasp locks provide an additional level of security and the ability to use

your padlocks of choice (not included)

• Notebooks and students are separated from all line voltage

• Superior, all-metal overhead cord management system keeps charge

cords organized above each storage bay

Available with:

• PowerProdigy™ timer that senses current from both power units and

distributes power (up to 10A) to the least-charged devices rst

(where charging is needed most) *For most power adapters up to 135W

• eLogix™ timer provides cycling power to both power units

(non current-sensing) *For most power adapters up to 65W

• Four horizontally adjustable, 8-outlet, (125V~/12A, 60Hz) universal

power units work with both inline, and wall adapters

• External power switch provides easy-access for safe power connection

/ disconnection

• 2 aux outlets (always on) for teacher laptop, Wi-Fi access point, or

other accessory (1 external, 1 internal)

• Large, removable QuickBrick™ wiring trays with retaining straps for

charge adapters allow wiring to be completed outside the cart at the

comfort of a workstation or desk to provide quick and easy integration

• Ventilated doors and side panels keep notebooks and chargers cool,

preventing overheating, and extending device life

• Replaceable, IEC quick-release 8’ nominal 14 AWG, 3-wire power cord

and external cord wrap brackets provide easy power access

• Four inboard locking 5” balloon wheel casters provide easy rolling, and

quiet transport

• One all steel handle provides control and maneuverability

• Worksurface and base panel vinyl edging protects walls and furniture

• Cart ships fully-assembled with handle for quick, simple integration and

deployment

• Durable powder coated steel chassis provides a long-lasting nish

• Scratch and impact-resistant high-pressure laminate top provides a

durable, useful worksurface for instructors

• ETL recognized (certied to UL 60950-1) in the US and Canada for the

cart and electrical system

• Warranted to be free of all defects in materials and workmanship for 10

years, electrical system 2 years

• Designed and assembled in Chippewa Falls, WI, USA

This cart is designed to hold up to 32 notebooks or laptops.

55472-ABD - with 5” Balloon Wheels, PowerProdigy™ timer

55472-ABL - with 5” Balloon Wheels, eLogix™ timer

Device-side

(shown with doors open)

Color Options

Laminate:

White Fiesta

Metal:

Warm Gray

Page 2 of 11revised 7/22/19

Construction

• The worksurface and base panel is constructed from 1” NAF (No Added Formaldehyde) composite board

with .030” high-pressure laminate on one face, and a balancing phenolic backer on the opposing face

• Worksurface and base panel edges are covered with 3mm vinyl edgeband

• 16-gauge side panels, shelves, and doors

• All metal components are nished with a scratch-resistant powder coat epoxy

• This cart is factory-assembled, packaged, and shipped on its own skid

Specications

Capacity 32 Notebooks or Laptops

Storage bays (nominal) 1.625”W [4.13 cm] x 17.458”D [44.3 cm] x 12.349”H [31.36 cm]

Electrical • (4) 8-outlet power units (outlets rotated 90°)

• 125V~/12A, 60Hz

• 15-amp breaker

• Locking power-side door isolates and separates

electrical line voltage from students

• ETL recognized (certied to 60950-1)

Charging options (See p.4 for specs)

5” Balloon Wheels Weight capacity 300 lb [136 kg] each

Certications / Compliance • ETL recognized

• SCS Indoor Advantage Certied

• Meets or exceeds applicable ANSI-BIFMA test

standards

Unit weight (nominal) 208 lb [94.4 kg]

Shipping weight (nominal) 240 lb [108.9 kg]

Specications subject to change without notice

ORDER CODE B = 5” Balloon Wheel

Devices must be placed in the bays with the charge

plug on one of the two exposed edges shown.

Double-bolt lock with padlock

hasp (on both doors)

(padlocks not included)

Page 3 of 11revised 7/22/19

Electrical Options

Pro32 Electrical comparison

PowerProdigy™

Timer

eLogix™

Timer

üExternal auxiliary outlet

ü ü Internal auxiliary outlet

ü ü External on/off switch

üLoad-sensing technology

ü2 bank

ü4 bank

üMax charging capacity: 5,760 watts

(on Pro32, most power adapters up to 135W)

üMax charging capacity: 2,880 watts

(on Pro32, most power adapters up to 65W)

ü ü LED lights indicate charging status

ü ü ETL certied to 60950-1

Total watts required

per cart (estimated) =Number of

devices XCharger

wattage

Internal side

External side

AUX outlet LED lights Power switch

A B C D IEC AUX

Outlet

Inlet

Outlets

eLogix™ Timer (L)

Internal side

External side

A A B B IEC AUX

Outlet

Inlet

Outlets

Power switch

The eLogix™ timer charges one half of the devices for 15 minutes,

then charges the second half of the devices for another 15 minutes.

This cycling occurs automatically and is not adjustable. Maximum

charging capacity: 2,880 watts.

PowerProdigy™ Timer (D)

• Smart charging senses current

and distributes power to the

power units requiring it most

• Four timed power unit-dedicated

outlets (labeled A, B, C, D)

controlled by logic board

• Four green LED lights indicate

charging activity status of each

power unit

• Two auxiliary outlets (1 external,

1 internal)

• ETL recognized (certied to 60950-1)

Input: 125V~/12A, 60Hz

Breaker: 15A, 250 VAC

Cycling interval: 15 minutes

Cycling outlets: 4 timed (A, B, C, D) up to 10A

Auxiliary outlets: 1A each (controlled by main power switch)

Power Cord: IEC quick-release (replaceable)

8’ nominal, 14 AWG, 3-wire

Power switch: 15A (externally accessible)

Use with higher amp-draw devices.

Maximum charging capacity: 5,760 watts.

• Two timed power-unit dedicated outlets (labeled A, B)

(up to 10A power output)

• Two green LED lights indicate charging activity status

• One auxiliary outlet (external)

• ETL recognized (certied to 60950-1)

Input: 125V~/12A, 60Hz

Breaker: 15A, 250 VAC

Cycling interval: 15 minutes

Cycling outlets: 4 timed (A, B) up to 10A

Auxiliary outlet: 1A (controlled by main power switch)

Power Cord: IEC quick-release (replaceable)

8’ nominal, 14 AWG, 3-wire

Power switch: 15A (externally accessible)

LED lights

External power switch,

LED indicators, and

AUX outlet

Page 4 of 11revised 7/22/19

Pro32 Notebook Cart

Page 5 of 11revised 7/22/19

Section view A-A

Power-side Device-side

Inline adapter

and cord storage

QuickBrick™

removable tray

8-outlet

power units

QuickBrick™

removable tray

Inline adapter

and cord storage

8-outlet

power units

Notebook / laptop

Page 6 of 11revised 7/22/19

Device-side view wiring diagram

(shown without doors)

Overhead cord

management

1.625

[4.13 cm]

Overhead cord

management

Page 7 of 11revised 7/22/19

Cord wrap

QuickBrick™ removable tray

14 AWG, 3-wire IEC power

cord on each lower power unit

(to PowerProdigy™ timer)

QuickBrick™ removable tray

QuickBrick™ removable tray QuickBrick™ removable tray

8’ nominal [1m] 14 AWG,

3-wire IEC power cord

(to wall outlet)

2.098 [5.33 cm]

5.536 [14 cm]

2.098 [5.33 cm]

8-outlet power unit

Power-side wiring diagram

and power unit adjustability

(shown without doors)

To timer

8-outlet power unit

Note: Each 8-outlet power unit is designed with 1.5” of horizontal adjust-

ability to provide outlet stagger if necessary. This helps accommodate a

wide variety of wall adapter plug sizes and congurations.

Each power unit can also be relocated to a higher vertical position using sec-

ondary sets of keyhole slots. This can be done to accommodate extra large

wall adapters. The QuickBrick™ trays have to be removed in this conguration.

Page 8 of 11revised 7/22/19

Upper

power

unit

Lower

power

unit

1.53”

[3.89 cm]

Power unit adjustability

Note: Each 8-outlet power unit is designed with 1.53” of horizontal adjustability to provide outlet stagger

if necessary. This helps accommodate a wide variety of wall adapter plug sizes and congurations.

Nominal outlet spacing on

each 8-outlet power unit

(See p.8 for spacing above and below outlets)

Note: 4 sets of keyhole slots provide the ability to verti-

cally relocate each 8-outlet power unit. This can be

done to provide clearance for extra large wall adapters.

Loosening two screws on each power unit allows easy

adjustment. The QuickBrick™ trays are not needed and

have to be removed in this conguration. Keyhole slots

Page 9 of 11revised 7/22/19

Power unit vertical adjustability

(shown without door)

Factory-installed position Typical spaced positions

for large wall adapters

QuickBrick™ removable tray

loaded with inline adapters

in vertical position

QuickBrick™ removable tray

loaded with inline adapters

in horizontal position

Note: Cart includes four QuickBrick™ removable trays

with a Velcro® retaining straps for charge adapters to

provide fast and easy wiring for quick deployment.

Page 10 of 11revised 7/22/19

Accessories

Slot labels for Pro32 - 55477

• Black numbers on transparent

adhesive backer

• 1-16 label, 17-32 label

Hook-and-loop Strap Kit - 95004

(16) .75” [1.91 cm] x 12” [30.48 cm],

and (32) .75” [1.91 cm] x 5” [12.7 cm]

A.3125” [7.9 mm]

B 1” [25.4 mm]

C.983” [25 mm]

D 2.07” [52.5 mm]

E.987” [25.1 mm]

Re-programmable 4-digit Combination Lock - 95536

• Set your own 4-digit personalized combination (up to 10,000 options)

• 5/16” hardened steel shackle for cut-resistance

• Black powdercoated die-cast body for durability

• Change key included

• Unit weight: .55 lb [.25 kg]

Verrou à combinaison à quatre chiffres reprogrammable - 95536

• Réglez votre propre combinaison personnalisée à quatre chiffres (jusqu’à

10 000 options)

• Arceau en acier durci de 7,9 mm (5/16 po) pour résistance aux coupures

• Corps moulé enduit de poudre noire pour une durabilité accrue

• Clé de rechange comprise

• Poids de l’unité : 0,25 kg [0,55 lb]

Bloquo reprogramable con combinación de 4 dígitos: 95536

• Ajuste su combinación personalizada de 4 dígitos (hasta 10 000 opciones)

• Grillete de acero reforzado de 5/16” con resistencia de corte

• Cuerpo de fundición a presión con recubrimiento de polvo negro que

refuerza la durabilidad

• Se incluye una llave de cambio

• Peso de la unidad: .55 lb [.25 kg]

A.3125” [7.9 mm]

B 1” [25.4 mm]

C.983” [25 mm]

D 2.07” [52.5 mm]

E.987” [25.1 mm]

Re-programmable 4-digit Combination Lock - 95536

• Set your own 4-digit personalized combination (up to 10,000 options)

• 5/16” hardened steel shackle for cut-resistance

• Black powdercoated die-cast body for durability

• Change key included

• Unit weight: .55 lb [.25 kg]

Verrou à combinaison à quatre chiffres reprogrammable - 95536

• Réglez votre propre combinaison personnalisée à quatre chiffres (jusqu’à

10 000 options)

• Arceau en acier durci de 7,9 mm (5/16 po) pour résistance aux coupures

• Corps moulé enduit de poudre noire pour une durabilité accrue

• Clé de rechange comprise

• Poids de l’unité : 0,25 kg [0,55 lb]

Bloquo reprogramable con combinación de 4 dígitos: 95536

• Ajuste su combinación personalizada de 4 dígitos (hasta 10 000 opciones)

• Grillete de acero reforzado de 5/16” con resistencia de corte

• Cuerpo de fundición a presión con recubrimiento de polvo negro que

refuerza la durabilidad

• Se incluye una llave de cambio

• Peso de la unidad: .55 lb [.25 kg]

See spectrumfurniture.com for the latest

accessories and detailed warranty information.

Page 11 of 11revised 7/22/19

We will make it right for you!

Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each

product is stringently monitored throughout the production process through our Quality Management System.

We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below

from the date of delivery. This warranty shall not apply to defects or damage resulting from normal wear and tear, misuse, or unintended use, failure to follow

instructions related to the product’s installation or intended use, abuse, neglect, improper care, modiﬁ cation or repair not authorized by Spectrum, or any other

cause outside the control of Spectrum. Spectrum will, at its sole option, either repair or replace the defective product.

This warranty is exclusive; no other warranty, written or oral, is expressed or implied. This warranty is given by Spectrum to Buyer or Buyer third party

end user and to no other person or legal entity. No Spectrum dealer, distributor, partner, reseller, agent or employee is authorized to make any modiﬁ ca-

tion or addition to this warranty.

NOTWITHSTANDING ANYTHING TO THE CONTRARY, SPECTRUM WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INDIRECT OR LIQUI-

DATED DAMAGES, INCLUDING CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES. IN NO EVENT SHALL SPECTRUM’S LIABILITY, WHETHER

UNDER CONTRACT OR WARRANTY, IN TORT OR OTHERWISE, EXCEED THE PURCHASE PRICE RECEIVED BY SPECTRUM FOR THE PRODUCT AT

ISSUE AND “RECALL ACTION” EXPENSES. SPECTRUM SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARIS-

ING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH

RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SPECTRUM, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.

Our Customer Service Department is ready to provide immediate attention to any questions, comments or concerns. They are available to answer your calls

Monday through Friday from 7 am to 5 pm CST. In addition your product comments or concerns are welcome via e-mail at: [email protected].

Item Warranty Period

Desk, table, cart and lectern chassis 10 Years

Electrical 2 Years

Flat panel monitor arms / gas spring / general parts 2 Years

Adjustable crank / electric legs and accessories 2 Years

Flat panel desk gas spring cylinders 2 Years

Height adjustable columns, lifts & accessories 2 Years

Casters & wheels 2 Years

Keyboard, mouse, trays 2 Years

Locks & keys 2 Years

Tubs, totes and other accessories 1 Year