Spectrum Industries 55470-ABD Manuel utilisateur

Marque: Spectrum Industries

Modèle: 55470-ABD

Catégorie: Chariots de gestion d'appareils portables

Taper: Manuel utilisateur

55470

Page 1 of 10revised 7/19/19

Cloud40™ Chromebook™ Cart

Technical Specications

Use the Cloud40 cart to store, transport, and charge up to 40 of the largest devices. The cart’s compact footprint (30.75” x

26”) allows easy movement between rooms and saves valuable space. A current-sensing timer provides adaptive switching,

preventing electrical overload in underpowered classrooms, and will handle the next generation of devices with high wattage

charge adapters. Padded shelves and flexible dividers protect the devices. Overhead wire management aids the wiring integra-

tion and allows the charging plugs to hang in front of each device. The cart’s compact footprint and handle provide easy mobil-

ity. The Cloud40 Cart is made with heavy-gauge steel for security and powder-coated for a durable, long-lasting finish. A dual-

bolt lock with hasp on the doors increase security of the devices.

Features and Benets

• Stores, charges, and transports up to 40 of the largest devices (up to 14”)

• 1.25”W x 15.3”D x 12.3438”H storage bay

• Small cart footprint (30.75”W x 26”D) saves valuable space

• Durable ABS plastic dividers protect devices from scratching (dividers

are removable to provide storage space for thicker devices)

• Dual doors provide easy access while reducing space necessary for

swing radius

• Double bolt keyed locks and heavy-gauge steel doors provide security

• Hasp locks provide an additional level of security and the ability to use

your padlocks of choice

(not included), or secure the unit to a wall

• Devices and students are separated from all line voltage

• Superior, all-metal overhead cord management system keeps charge cords

organized above each storage bay

• Intuitive PowerProdigy™ charging system senses current from up to

four, 10-outlet power units and distributes power (up to 10A) to the

least-charged devices rst (where charging is needed most)

*For most power adapters up to 135W

• Four adjustable, 10-outlet, (125V~/12A, 60Hz) universal power units

work with both inline, and wall adapters

• External power switch provides easy-access for safe power connection

/ disconnection

• 2 auxiliary outlets (always on) for teacher laptop, Wi-Fi access point,

or other accessory (1 external, 1 internal)

Power side Device side

Note: This cart is designed to hold up to 40 devices.

• Large, removable QuickBrick™ wiring trays with retaining straps for charge

adapters allow wiring to be completed outside the cart at the comfort of a

workstation or desk to provide quick and easy integration

• Ventilated doors and side panels keep devices and chargers cool,

preventing overheating, and extending device life

• Replaceable, IEC quick-release, 8’ nominal 14 AWG, 3-wire power cord

and external cord wrap brackets provide easy power access

• Four inboard locking 5” balloon wheel casters provide easy rolling, and

quiet transport

• One all steel handle provides control and maneuverability

• Worksurface and base panel vinyl edging protects walls and furniture

• Cart ships fully-assembled with handle for quick, simple integration

and deployment

• Durable powder coated steel chassis provides a long-lasting nish

• Scratch and impact-resistant high-pressure laminate top provides a

durable, useful worksurface for instructors

• ETL recognized (certied to UL 60950-1) in the US and Canada for the

cart and electrical system

• Warranted to be free of all defects in materials and workmanship for

10 years, electrical system 2 years

• Designed and assembled in Chippewa Falls, WI, USA

Color Options

Laminate:

White Fiesta

Metal:

Warm Gray

55470-ABD - with 5” Balloon Wheels, PowerProdigy™ timer

Page 2 of 10revised 7/19/19

Construction

• The worksurface and base panel is constructed from 1” NAF (No Added Formaldehyde) composite board with

.030” high-pressure laminate on one face, and a balancing phenolic backer on the opposing face

• Worksurface and base panel edges are covered with 3mm vinyl edge band

• 16-gauge side panels, shelves, and doors

• All metal components are nished with a scratch-resistant powder coat epoxy

• This cart is factory-assembled, packaged, and shipped on its own skid

Specications

Capacity 40 devices

Storage bays (nominal) 1.25”W [3.18 cm] x 15.3”D [38.89 cm] x 12.3438”H [31.36 cm]

Electrical • (4) 10-outlet power units (outlets rotated 90°)

• 125V~/12A, 60Hz

• 15-amp breaker

• Locking power-side door isolates and separates

electrical line voltage from students

• ETL recognized (certied to 60950-1)

PowerProdigy™ Timer • Low-prole, 16-gauge steel enclosure

• 125V~/12A, 60Hz

• Externally-accessible 15A on/off switch

• Smart charging senses current and distributes

power to the power units requiring it most

• Four timed power unit-dedicated outlets

(labeled A, B, C, D) controlled by logic board

(up to 10A power output)

• Cycling interval 15 min

• Four LED lights indicate charging activity status of

each power unit

• Two auxiliary outlets (1 external, 1 internal) 1A each

(controlled by main on/off switch)

• IEC quick-release (replaceable) 8’ nominal,

14 AWG, 3-wire power cord

• ETL recognized (certied to 60950-1)

5” Balloon Wheels Weight capacity 300 lb [136 kg] each

Certications / Compliance • ETL recognized

• SCS Indoor Advantage Certied

• Meets or exceeds applicable ANSI-BIFMA test

standards

Unit weight (nominal) 208 lb [94.4 kg]

Shipping weight (nominal) 240 lb [108.9 kg]

Specications subject to change without notice

Double-bolt lock with padlock

hasp (on both doors)

(padlocks not included)

ORDER CODE B = 5” Balloon Wheel

Devices must be placed in the bays with the charge

plug on one of the two exposed edges shown.

Note: The customer should be aware of the amp draw of the devices used with this cart-especially

when maxing out the storage and charging capacity. Exceeding 15 amps will trip the circuit breaker.

Please consult the owners manual of your specic device for power consumption information.

External power

switch, LED

indicators, and

AUX outlet

Page 3 of 10revised 7/19/19

Cloud40 Chromebook Cart

Page 4 of 10revised 7/19/19

Section view A-A

(shown with common Chromebook models)

Power side Device side

10-outlet power units

Inline adapter

and cord storage

QuickBrick™

removable tray

Wall

adapter

Horizontal

10-outlet

power units

QuickBrick™

removable tray

Vertical

Inline adapter

and cord storage

Wall

adapter

Page 5 of 10revised 7/19/19

Device side view wiring diagram

(shown without door)

1.332

[3.39 cm] Overhead cord

management

Overhead cord

management

Page 6 of 10revised 7/19/19

Power side wiring diagram

(shown without door)

Cord wrap

QuickBrick™ removable tray

59” nominal 14 AWG,

3-wire IEC power cord on

each lower power unit

(to PowerProdigy™ timer)

QuickBrick™ removable tray

QuickBrick™ removable tray QuickBrick™ removable tray

8’ nominal 14 AWG,

3-wire IEC power cord

(to wall outlet)

2.098 [5.33 cm]

5.536 [14 cm]

2.098 [5.33 cm]

To PowerProdigy™ timer

10-outlet power unit

Note: Each 10-outlet power unit is designed with 3.5” of horizontal

adjustability to provide outlet stagger if necessary. This helps accom-

modate a wide variety of wall adapter plug sizes and congurations.

Each power unit can also be relocated to a higher vertical position using

secondary sets of keyhole slots. This can be done to accommodate extra

large wall adapters. The QuickBrick™ trays have to be removed in this

conguration.

Page 7 of 10revised 7/19/19

3.5”

[8.89 cm]

3.5”

[8.89 cm]

Upper

power

unit

Nominal outlet spacing on

each 10-outlet power unit

Lower

power

unit

(See p.7 for spacing

above and below outlets)

Power unit adjustability

Note: Each 10-outlet power unit is designed with 3.5” of horizontal adjustability to provide outlet stagger

if necessary. This helps accommodate a wide variety of wall adapter plug sizes and congurations.

Total watts required

per cart (estimated) =Number of

devices XCharger

wattage

Internal side

External side

AUX outlet LED lights Power switch

A B C D IEC AUX

Outlet

Inlet

Outlets

PowerProdigy™ Timer

• Smart charging senses current

and distributes power to the

power units requiring it most

• Four timed power unit-dedicated

outlets (labeled A, B, C, D)

controlled by logic board

• Four green LED lights indicate

charging activity status of each

power unit

• Two auxiliary outlets (1 external,

1 internal)

• ETL recognized (certied to 60950-1)

Input: 125V~/12A, 60Hz

Breaker: 15A, 250 VAC

Cycling interval: 15 minutes

Cycling outlets: 4 timed (A, B, C, D) up to 10A

Auxiliary outlets: 1A each (controlled by main power switch)

Power Cord: IEC quick-release (replaceable)

8’ nominal, 14 AWG, 3-wire

Power switch: 15A (externally accessible)

Use with higher amp-draw devices.

Maximum charging capacity: 5,760 watts.

Power unit vertical adjustability

(shown without door)

Keyhole slots

Page 8 of 10revised 7/19/19

Note: Four sets of keyhole slots provide the ability

to vertically relocate each 10-outlet power unit. This

can be done to provide clearance for extra large wall

adapters. Loosening two screws on each power unit

allows easy adjustment. The QuickBrick™ trays are not

needed and have to be removed in this conguration.

Factory-installed position Typical spaced positions

for large wall adapters

A.3125” [7.9 mm]

B 1” [25.4 mm]

C.983” [25 mm]

D 2.07” [52.5 mm]

E.987” [25.1 mm]

Re-programmable 4-digit Combination Lock - 95536

• Set your own 4-digit personalized combination (up to 10,000 options)

• 5/16” hardened steel shackle for cut-resistance

• Black powdercoated die-cast body for durability

• Change key included

• Unit weight: .55 lb [.25 kg]

Verrou à combinaison à quatre chiffres reprogrammable - 95536

• Réglez votre propre combinaison personnalisée à quatre chiffres (jusqu’à

10 000 options)

• Arceau en acier durci de 7,9 mm (5/16 po) pour résistance aux coupures

• Corps moulé enduit de poudre noire pour une durabilité accrue

• Clé de rechange comprise

• Poids de l’unité : 0,25 kg [0,55 lb]

Bloquo reprogramable con combinación de 4 dígitos: 95536

• Ajuste su combinación personalizada de 4 dígitos (hasta 10 000 opciones)

• Grillete de acero reforzado de 5/16” con resistencia de corte

• Cuerpo de fundición a presión con recubrimiento de polvo negro que

refuerza la durabilidad

• Se incluye una llave de cambio

• Peso de la unidad: .55 lb [.25 kg]

A.3125” [7.9 mm]

B 1” [25.4 mm]

C.983” [25 mm]

D 2.07” [52.5 mm]

E.987” [25.1 mm]

Re-programmable 4-digit Combination Lock - 95536

• Set your own 4-digit personalized combination (up to 10,000 options)

• 5/16” hardened steel shackle for cut-resistance

• Black powdercoated die-cast body for durability

• Change key included

• Unit weight: .55 lb [.25 kg]

Verrou à combinaison à quatre chiffres reprogrammable - 95536

• Réglez votre propre combinaison personnalisée à quatre chiffres (jusqu’à

10 000 options)

• Arceau en acier durci de 7,9 mm (5/16 po) pour résistance aux coupures

• Corps moulé enduit de poudre noire pour une durabilité accrue

• Clé de rechange comprise

• Poids de l’unité : 0,25 kg [0,55 lb]

Bloquo reprogramable con combinación de 4 dígitos: 95536

• Ajuste su combinación personalizada de 4 dígitos (hasta 10 000 opciones)

• Grillete de acero reforzado de 5/16” con resistencia de corte

• Cuerpo de fundición a presión con recubrimiento de polvo negro que

refuerza la durabilidad

• Se incluye una llave de cambio

• Peso de la unidad: .55 lb [.25 kg]

Page 9 of 10revised 7/19/19

Hook-and-loop Strap Kit - 95004

(16) .75” [1.91 cm] x 12” [30.48 cm],

and (32) .75” [1.91 cm] x 5” [12.7 cm]

Slot labels for Cloud40 - 55475

• Black numbers on transparent

adhesive backer

• 1-20 label, 21-40 label

Accessories

QuickBrick™ removable tray

loaded with inline adapters in

vertical position

QuickBrick™ removable tray

loaded with inline adapters in

horizontal position

Note: Cart includes four QuickBrick™ removable trays

with a hook and loop retaining strap for charge adapters

to provide fast and easy wiring for quick deployment.

For devices with wall adapters, the QuickBrick™ re-

movable trays can be used to store bundled cords.

See spectrumfurniture.com for the latest

accessories and detailed warranty information.

Page 10 of 10revised 7/19/19

We will make it right for you!

Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each

product is stringently monitored throughout the production process through our Quality Management System.

We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below

from the date of delivery. This warranty shall not apply to defects or damage resulting from normal wear and tear, misuse, or unintended use, failure to follow

instructions related to the product’s installation or intended use, abuse, neglect, improper care, modiﬁ cation or repair not authorized by Spectrum, or any other

cause outside the control of Spectrum. Spectrum will, at its sole option, either repair or replace the defective product.

This warranty is exclusive; no other warranty, written or oral, is expressed or implied. This warranty is given by Spectrum to Buyer or Buyer third party

end user and to no other person or legal entity. No Spectrum dealer, distributor, partner, reseller, agent or employee is authorized to make any modiﬁ ca-

tion or addition to this warranty.

NOTWITHSTANDING ANYTHING TO THE CONTRARY, SPECTRUM WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INDIRECT OR LIQUI-

DATED DAMAGES, INCLUDING CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES. IN NO EVENT SHALL SPECTRUM’S LIABILITY, WHETHER

UNDER CONTRACT OR WARRANTY, IN TORT OR OTHERWISE, EXCEED THE PURCHASE PRICE RECEIVED BY SPECTRUM FOR THE PRODUCT AT

ISSUE AND “RECALL ACTION” EXPENSES. SPECTRUM SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARIS-

ING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH

RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SPECTRUM, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.

Our Customer Service Department is ready to provide immediate attention to any questions, comments or concerns. They are available to answer your calls

Monday through Friday from 7 am to 5 pm CST. In addition your product comments or concerns are welcome via e-mail at: [email protected].

Item Warranty Period

Desk, table, cart and lectern chassis 10 Years

Electrical 2 Years

Flat panel monitor arms / gas spring / general parts 2 Years

Adjustable crank / electric legs and accessories 2 Years

Flat panel desk gas spring cylinders 2 Years

Height adjustable columns, lifts & accessories 2 Years

Casters & wheels 2 Years

Keyboard, mouse, trays 2 Years

Locks & keys 2 Years

Tubs, totes and other accessories 1 Year