Part A
Bulb
Part G
Table Base
Part E
Gemma Shade
Part B
Harp
Part F
Globe
Part C
Finial
Part D
Washer
Gemma Table Lamp, Medium
Assembly Guide incommonwith.com1 of 3
Contents
How to Install Your New Light
Please check that you received all of the components pictured in
this guide. Reach out to us if anything is missing. It’s very rare, but it
happens. Don’t forget to turn o the electrical power source.
You won’t need any additional tools.
CAUTION
As a safety feature, this lamp has a polarized plug to reduce the
risk of electric shock. This means it has two flat prongs and a third
circular prong underneath, and it will fit in an outlet one way only. If
the plug does not fit fully and easily into the outlet, do not force it;
contact a qualified electrician.
ATTENTION
Par mesure de sécurité, cette lampe a une fiche polarisée pour
réduire le risque de choc électrique. Cela signifie qu’il a deux
broches plates et une troisième broche circulaire en dessous, et
qu’il ne s’insère dans une prise que dans un seul sens. Si la fiche ne
s’insère pas complètement et facilement dans la prise, ne la forcez
pas; contactez un électricien qualifié.
Gemma Table Lamp, Medium
Assembly Guide incommonwith.com2 of 3
Step 2: Thread washer (D) onto table base, tightening the globe (F) into
place.
Step 1: Slide the glass globe (F) over the table base (G). Align the side
hole on the glass base with the cord.
Step 3: Thread the harp (B) onto the table base (G). Leave a sliver of space
between the harp and the washer. Do not overtighten the harp, this will
prevent the glass base from bearing too much weight.
Step 4: Screw bulb (A) into place.
F
G
F
D
B
G
A
Gemma Table Lamp, Medium
Step 5: Carefully place Gemma shade (E) onto the harp (B), feeding the
threaded part through the hole in the shade.
Assembly Guide incommonwith.com3 of 3
Step 6: Screw finial (C) onto harp (B).
E
B
B
C
Step 7: Plug in the fixure and turn on the light.
-
1
-
2
-
3
