Jenn-Air JB36NXFXLW00 Guide d'installation

Marque: Jenn-Air

Modèle: JB36NXFXLW00

Taper: Guide d'installation

JENN-AIR_BOTTOMMOUNTBUILT-INREFRIGERATOR

CONGEI_DOR ENLAPARE INFERIORJENN-AII_

REFRIGI_RATEURENCASTRI_AVECCONGI_LA'EUR

ENBASJENN-AII_

INSTALLATIONGUIDE

For questions about features, operation/performance, parts, accessories, or service, call:

1-800-JENNAIR (1-800-536-6247) or visit our website at www.jennair.com.

In Canada, call: 1-800-807-6777, or visit our website at www.jennair.ca.

MANUAL DEINSTALACION

Si tiene preguntas respecto alas caracteristicas, funcionamiento, rendimiento, partes, accesorios o servicio tecnico, Ilame al:

1-800-JENNAIR (1-800-536-6247) o visite nuestro sitio de internet: www.jennair.com.

En CanadA, Ilame al: 1-800-807-6777, o visite nuestro sitio de internet: www.jennair.ca.

GUIDED'INSTALLATION

Au Canada, pour assistance, installation ou service, composez le 1-800-807-6777 ou visitez notre site web & www.jennair.ca.

Table of Contents/[ndice/Table des matieres ...................................................................................... 2

_°JENN-AIRo

W10231367A

TABLEOF CONTENTS

REFRIGERATOR SAFETY ........................................................................... 3

36" MODELS ................................................................................................ 4

Euro-Style and Pro-Style ®Door Handle Kits ........................................... 4

42" FRENCH DOOR MODELS .................................................................... 5

Euro-Style and Pro-Style ®Door Handle Kits ............................................ 5

INSTALLATION REQUIREMENTS ............................................................. 6

Tools and Parts ......................................................................................... 6

Location Requirements ............................................................................. 6

Electrical Requirements ............................................................................ 7

Water Supply Requirements ..................................................................... 8

Product Dimensions ................................................................................. 8

Tipping Radius .......................................................................................... 9

Door Swing Dimensions ........................................................................... 9

Cabinet and Panel Installation Options .................................................. 10

Fully Integrated Installation Requirements ............................................. 10

Custom Overlay Panels .......................................................................... 11

Overlay Panel Dimensions ...................................................................... 12

INSTALLATION INSTRUCTIONS ............................................................. 13

Unpack the Refrigerator ......................................................................... 13

Move the Refrigerator into House .......................................................... 13

Install Anti-Tip Boards ............................................................................ 13

Connect the Water Supply ..................................................................... 14

Plug in Refrigerator ................................................................................. 15

Move Refrigerator to Final Location ....................................................... 16

Level and Align Refrigerator ................................................................... 16

Install Refrigerator and Overlay Panels .................................................. 17

Install Handles ........................................................................................ 21

Install Base Grille .................................................................................... 21

Complete Installation .............................................................................. 22

Water System Preparation ..................................................................... 22

[NDICE

SEGURIDAD DEL REFRIGERADOR ........................................................ 23

MODELOS DE 36". .................................................................................... 24

Juegos de manijas para puertas Euro-Style y Pro-Style ®..................... 24

MODELOS DE DOS PUERTAS CON CONGELADOR

EN LA PARTE INFERIOR, DE 42". ........................................................... 25

Juegos de manijas para puertas Euro-Style y Pro-Style ®..................... 25

REQUlSITOS DE INSTALACION .............................................................. 26

Piezas y herramientas ............................................................................. 26

Requisitos de ubicaci6n ......................................................................... 26

Requisitos electricos ............................................................................... 27

Requisitos del suministro de agua ......................................................... 28

Dimensiones del producto ...................................................................... 28

Arco de vuelco ........................................................................................ 29

Medidas de oscilaci6n de las puertas .................................................... 29

Opciones para la instalaci6n del armario y los paneles ......................... 30

Requisitos para la instalaci6n completamente incorporada .................. 30

Paneles recubiertos a la medida ............................................................ 31

Dimensiones de los paneles recubiertos ............................................... 32

INSTRUOOIONES DE INSTALAOION ...................................................... 33

Desempaque el refrigerador ................................................................... 33

C6mo introducir el refrigerador en la casa ............................................. 33

C6mo instalar los tableros antivuelco .................................................... 33

Conexi6n del suministro de agua ........................................................... 34

C6mo enchufar el refrigerador ............................................................... 35

C6mo mover el refrigerador a su ubicaci6n final ................................... 36

Nivelaci6n y alineamiento del refrigerador ............................................. 36

Instalaci6n del refrigerador y los paneles recubiertos ........................... 37

Instalaci6n de las manijas ....................................................................... 41

Instalaci6n de la rejilla de la base ........................................................... 41

C6mo terminar la instalaci6n .................................................................. 42

Preparaci6n del sistema de agua ........................................................... 42

TABLEDESMATIERES

SleCURITle DU RleFRIGleRATEUR ........................................................... 43

MOD#LES DE 36". ..................................................................................... 44

Ensembles de poignees de porte Euro-Style et Pro-Style ®.................. 44

MOD#LES DE PORTE A DOUBLE BATTANT DE 42". ........................... 45

Ensembles de poignees de porte Euro-Style et Pro-Style ®.................. 45

EXlGENOES D'INSTALLATION ................................................................ 46

Outillage et pieces .................................................................................. 46

Exigences d'emplacement ..................................................................... 46

Specifications _lectriques ...................................................................... 47

Specifications de I'alimentation en eau.................................................. 48

Dimensions du produit ............................................................................ 48

Rayon de basculement ........................................................................... 49

Dimensions pour I'ouverture des portes ................................................ 49

Options d'installation du placard et du panneau ................................... 50

Exigences d'une installation int6gree ..................................................... 50

Panneaux decoratifs sur mesure ............................................................ 51

Dimensions des panneaux d6coratifs .................................................... 52

INSTRUCTIONS D'INSTALLATION ......................................................... 53

D_ballage du r6frig_rateur ...................................................................... 53

Deplacement du refrig_rateur dans le domicile ..................................... 53

Installation de planches antibasculement .............................................. 54

Raccordement a I'alimentation en eau................................................... 54

Brancher le r6frig6rateur ......................................................................... 56

Deplacement du r6frig_rateur a son emplacement definitif ................... 56

R_glage de I'aplomb et alignement du r6frig_rateur .............................. 56

Installation du refrig6rateur et des panneaux decoratifs ....................... 57

Installation des poignees ........................................................................ 62

Installation de la grille de la base ........................................................... 62

Achever I'installation ............................................................................... 63

Preparation du syst_me d'eau ............................................................... 63

REFRIGERATORSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

36"MODELS

Integrated Design

Features custom-made panels and custom hardware provided

by the cabinetmaker for a seamless appearance designed to

blend with existing kitchen cabinetry.

Base Model Numbers: JB36NXFXLW, JB36NXFXRW

Pro-Style s Stainless Design

Features stainless steel wrapped doors and Pro-Style s handles with

diamond-etched grip.

Base Model Numbers: JB36NXFXLW, JB36NXFXRW

Kit Model Numbers: JPK36BNXWPS

All factory parts are available through your Jenn-Air dealer or by

calling Jenn-Air at 1-800-JENNAIR (1-800-536-6247). In Canada,

call 1-800-807-6777.

Follow the kit instructions for installing the door handles.

Pro-Style s Stainless Steel - BM W10250641

Euro-Style Stainless Steel - BM W10250635

Euro-Style Stainless Design

Features stainless steel wrapped doors and new Euro-style handles

designed to compliment the Jenn-Air Euro kitchen suite or enhance

any kitchen decor.

Base Model Numbers: JB36NXFXLW, JB36NXFXRW

Kit Model Number: JPK36BNXWES

42" FRENCHDOOR MODELS

Integrated Design

Uses custom-made panels and custom hardware provided by the

cabinetmaker for a seamless appearance designed to blend with

existing kitchen cabinetry.

Base Model Number: JF42NXFXDW

Pro-Style s Stainless Design

Features stainless steel wrapped doors and Pro-Style s handles with

diamond-etched grip.

Base Model Number: JF42NXFXDW

Kit Model Numbers: JPK42FNXWPS

ssnd e

All factory parts are available through your Jenn-Air dealer or by

calling Jenn-Air at 1-800-JENNAIR (1-800-536-6242). In Canada,

call 1-800-807-6277.

Follow the kit instructions for installing the door handles.

Pro-Style s Stainless Steel - FDBM W10250642

Euro-Style Stainless Steel - FDBM W10250636

Eure-Style Stainless Design

Features stainless steel wrapped doors and new Euro-style handles

designed to compliment the Jenn-Air Euro kitchen suite or enhance

any kitchen decor.

Base Model Number: JF42NXFXDW

Kit Model Number: JPK42FNXWES

INSTALLATIONREQUIREMENTS

IMPORTANT:

• Installer: Leave Installation Instructions with the homeowner.

• Homeowner: Keep Installation Instructions for future

reference. Save these Installation Instructions for the local

electrical inspector's use.

TOOLS NEEDED:

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

• Cordless drill

• Drill bits

• Two adjustable

wrenches

• Phillips screwdriver

• Small level

• Appliance dolly

• 3/32" Allen wrench

(panel kits only)

• 1%2"nut driver

• 3/8"and 1/2"open-end wrenches

• 5/32"and 3/le"Allen wrench

• 1/4"and _e" socket drivers

• Tape measure

• Utility knife

• Tape (painters)

PARTS NEEDED:

• Six #8 x 3" (7.6 cm) wood screws (longer screws may be needed)

• One or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood board(s)

• Integrated design - consult a qualified cabinetmaker or

carpenter to make the custom wood panels. See "Integrated

Series Custom Overlay Panels" for more information.

Stainless Steel design - the panel kit is shipped with the

refrigerator.

• Flexible, codes approved water supply tubing, a ferrule, a

union and a 1/4"(6.35 mm) compression fitting.

_' '= _= I ...... ,= , ,+>,= , ,i_<

E×plosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT:

• Observe all governing codes and ordinances.

• It is recommended that you do not install the refrigerator near

an oven, radiator, or other heat source.

• Do not install in a location where the temperature will fall

below 55°F (13°C).

• Floor must support the refrigerator weight, more than 600 Ibs

(272 kg), door panels and contents of the refrigerator.

• Ceiling height must allow for side tipping radius. See "Tipping

Radius."

• Location should permit door to open fully. See "Door Swing

Dimensions."

• Location must permit top grille removal. See "Opening

Dimensions."

Opening Dimensions

A solid soffit or wall cabinet must be installed 84" (213.4 cm)

above the floor. If the solid soffit is higher than 84" (213.4 cm)

or one is not available, then the refrigerator must be braced.

If the anti-tip boards are needed, they must be attached to the

rear wall studs so that there is 84" (213.4 cm) from the bottom

of the anti-tip board to the floor. See "Install Anti-Tip Boards"

for more information.

For a fully integrated installation, a minimum of 6" (15.24 cm)

of open space above the refrigerator is required. See "Fully

Integrated Installation." Anti-tip boards are required. See

"Install Anti-Tip Boards" for more information.

The width of the opening, from side to side, must be as

specified for your model, for at least 2" (5.08 cm) back from

the face of the cabinet. If your opening does not meet this

requirement, you will need to make modifications.

A grounded 3 prong electrical outlet should be placed within

4" (10.2 cm) of the right side cabinets or end panel. See

"Electrical Requirements" for more information.

The water shutoff should be located in the base cabinet on

either side of the refrigerator or some other easily accessible

area. If the water shutoff valve is not in the cabinets, the

plumbing for the water line can come through the floor. See

"Water Supply Requirements" for more information.

4" (213.4 cm)

to bottom of solid soffit

(10

77"

(196 cm)

Width

(see chart following)

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is

important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded

electrical supply is required. It is recommended that a separate

circuit serving only your refrigerator be provided. Use an outlet

that cannot be turned off by a switch. Do not use an

extension cord.

IMPORTANT: Ifthis product is connected to a GFCI (Ground Fault

Circuit Interrupter) protected outlet, nuisance tripping of the

power supply may occur, resulting in loss of cooling. Food quality

and flavor may be affected. If nuisance tripping has occurred, and

if the condition of the food appears poor, dispose of it.

NOTE: Before performing any type of installation, cleaning, or

removing a light bulb, remove the top grille and turn the master

power switch to OFF or disconnect power at the circuit breaker

box.

When you are finished, turn ON the master power switch or

reconnect power at the circuit breaker box. Then reset the control

to the desired setting.

Model Width A (as shown above)

36 36" (91.4 cm)

42 42" (106.7 cm)

Installation Type Depth B (as shown above)

Standard Flush 25" (63.5 cm) minimum

(new installation)

Retrofit Installations 24" (60.9 cm) minimum

IMPORTANT:

Flooring under refrigerator must be at same level as the

room. Face of cabinetry must be plumb.

The width of the opening (Width A), must be as specified

for your model, for at least 2" (5.08 cm) back from the face

of the cabinet. Ifyour opening does not meet this

requirement, you will need to make modifications.

fe S , , ,,

• p y

All installations must meet local plumbing code requirements.

The water supply line must come up through the floor in the

gray shaded area shown.

The water shutoff should be located in the base cabinet on

either side of the refrigerator or some other easily accessible

area. The right-hand side is recommended.

NOTE: There is not enough clearance to achieve a flush

installation if a water shutoff valve is located in the wall behind

the refrigerator.

(15.2 cm)

(2.54 cm)

A 1/2"(12.7 mm) hole for plumbing should be drilled at least 6"

(15.2 cm) from the right or left hand side cabinet or panel. On

the floor, the hole should be no more than 1" (2.54 cm) away

from the back wall. See "Connect the Water Supply."

If additional tubing is needed, use copper tubing and check

for leaks. Install the copper tubing only in areas where the

household temperatures will remain above freezing.

Do not use a piercing-type or ¾e" (4.76 mm) saddle valve

which reduces water flow and clogs more easily.

NOTE: Your refrigerator dealer has a kit available with a 1/4"

(6.35 mm) saddle-type shutoff valve, a union, and copper

tubing. Before purchasing, make sure a saddle-type valve

complies with your local plumbing codes.

Water Pressure

A cold water supply with water pressure between 30 and 120 psi

(207 and 827 kPa) is required to operate the water dispenser and

ice maker. Ifyou have questions about your water pressure, call a

licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the

refrigerator needs to be between 30 and 120 psi

(207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your

cold water supply, the water pressure to the reverse osmosis

system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

• Check to see whether the sediment filter in the reverse

osmosis system is blocked. Replace the filter if necessary.

• Allow the storage tank on the reverse osmosis system to refill

after heavy usage.

• If your refrigerator has a water filter, it may further reduce the

water pressure when used in conjunction with a reverse

osmosis system. Remove the water filter cartridge.

If you have questions about your water pressure, call a licensed,

qualified plumber.

>duc D mens o ss

IM PORTANT:

• The depth from the front face of the doors to the back of the

refrigerator cabinet is 24" (60.96 cm) without panels.

• The power cord is 84" (213 cm) long.

• The water supply line is located at the front of the refrigerator.

36" Bottom-Mount

Top View

24"

(61.0 cm)

353/4" _D,

(90.8 cm)

Front View

• Width dimensions were measured from hinge edge to clip

edge.

353/4"

_-_ (90.8 cm)

u u

lu u

_ij

84"

(213.4 cm)

42" French-Door Bottom-Mount

Top View

24"

(61.0 cm)

I< 413/4"

(106.1 cm) _'

Front View

• Width dimensions were measured from hinge edge to hinge

__j

edge.

413/4''

(106.1 cm)

84"

(213.4 cm)

Be sure there is adequate ceiling height to stand the refrigerator

upright when it is moved into place.

• The dolly wheel height must be added to the tipping radius

when a dolly is used.

• If needed, the tipping radius can be reduced. See "Reduce

Tipping Radius."

NOTE: Tip on side only.

Side Tipping Radius (36" [91.4 cm] Models)

i I

x, i

A. 88 %" (225.7 cm)

Side "13ppingRadius (42" [106.7 cm] Models)

i, ,i

A. 91%" (232.1 cm)

Doo Swng D mens ons

The location must permit both doors to open to a minimum of 90%

Allow 4W' (11.4 cm) minimum space between the side of the

refrigerator and a corner wall.

NOTE: More clearance may be required if you are using overlay

panels, custom handles, or extended handles.

A B C

Pitt,

90°/ \ \ ', .

/ 110 ° \ \. i i

_ \ ° 11:

_110_'_"_-_i !i\\\

Model A B C D

36 36" 393/4" 453/8" 463/4"

(91.4 cm) (101.0 cm) (115.3 cm) (118.8 cm)

42 42" 42" 483/8 50V4

(106.7 cm) (106.7 cm) (123.5 cm) (127.6 cm)

Cabinet Depth - 25" (63.5 cm)

Framed Cabinetry

TopView - Overlay

Cabinet Depth - 24" (60.9 cm)

Framed Cabinetry

TopView

A. Refrigerator door

B. Overlay panel

C. Side trim

Top View - Inset

D.Adjacent cabinet

E.Grillebracket

A. Refrigerator door

B. Overlay panel

C. Side trim

Frameless Cabinetry

TopView

D. Adjacent cabinet

E.Grille bracket

A B

A. Refrigerator door

B. Overlay panel

C. Side trim

Frameless Cabinetry

D. Adjacent cabinet

E. Grille bracket

A. Refrigerator door

B. Overlay panel

C. Side trim

D.Adjacent cabinet

E. Grifle bracket

/}/

A B

A. Refrigerator door

B. Overlay panel

C. Side trim

D. Adjacent Cabinet

E. Grifle bracket

The refrigerator can be installed fully integrated if the adjacent

cabinetry meets the airflow venting requirements critical to

refrigerator performance.

IM PORTANI"."

• Both Standard and Fully Integrated installations can be

achieved with either a 24" (60.9 cm) or 25" (63.5 cm) deep

opening.

• A full height grille is used to achieve a fully integrated

installation. Use the integrated bracket (provided) to attach the

full height grille.

NOTE: A top grille filler is not required with a full height grille.

Integrated Grille Bracket

Fully Integrated Installation - Side View

i i

i i_...............A

L__ ;

Airflow Venting Requirements

Fully integrated installations require a minimum of 6" (15.24 cm) of

open space above the refrigerator. This space must not be

blocked in any way, including soffits.

Option I - Open to Ceiling

6" (15.24 cm)

min.

[ 3

Option 2 - False Front (cabinet face only)

6" (15.24 cm)

min.

,U(l

__7

Custom overlay panels allow you to blend the exterior of your

refrigerator into the overall kitchen decor and to use custom

handles for additional design flexibility.

In some cases, your cabinet manufacturer may choose to work

with one panel routed for the different dimensions. Follow these

panel dimension and placement instructions to be sure that the

custom overlay panels will fit properly.

IMPORTANT:

• For 36" (91.4 cm) models, the refrigerator door overlay panel

cannot exceed 60 Ibs (27.2 kg) and the freezer drawer overlay

panel cannot exceed 25 Ibs (11.3 kg).

• For 42" (106.7 cm) models, the refrigerator door overlay panel

cannot exceed 40 Ibs (18.1 kg) and the freezer drawer overlay

panel cannot exceed 30 Ibs (13.6 kg).

• The weight of the top grille overlay panel cannot exceed 7 Ibs

(3.2 kg) for both models.

• The required thickness for all panels is 3/4"(1.91 cm).

• This installation does not require filler or backer panels.

36" (91.4 cm) Model - Door and Drawer Panels 42" (106.7 cm) Model - Door and Drawer Panels

52%"

(133.03 cm)

20V2"

(52.07 cm)

REFRIGERATOR DOOR PANEL

MaximumWeight:60 Ibs (27.2 kg)

< B >

FREEZERDRAWERPANEL

Maximum Weight: 25 Ibs (11.34 kg)

-T

52%"

(133.03 cm)

20W'

(52.07 cm)

-._----- A -------_ -._---- A ------_

REFRIGERATOR

DOOR PANEL

MaximumWeight:

40 Ibs (18.14kg)

REFRIGERATOR

DOOR PANEL

MaximumWeight:

40 robs(18.14 kg)

FREEZER DRAWER PANEL

MaximumWeight: 30 Ibs (13.6 kg)

I'!_[If:lll i [t} _I

f!_[l'7-*1111 It] _I

Pinch Hazard

Installation of door panels with less than a 3/8"(0.95 cm) gap

between the door panel and the adjacent cabinet increases

the risk of potential pinching.

Model 36" Bottom-Mount

Reveal %" %"

A 351/4'' (89.54 cm) 353/4'' (90.81 cm)

B 351/4'' (89.54 cm) 353/4'' (90.81 cm)

Pinch Hazard

Installation of door panels with less than a 3/8"(0.95 cm) gap

between the door panel and the adjacent cabinet increases

the risk of potential pinching.

Model 42" French Door Bottom-Mount

Reveal %" %"

A 20 %e"(52.23 cm) 2013/16'' (52.86 cm)

B 411/4'' (104.76 cm) 413/4'' (106.05 cm)

Grille Panel

Integrated Installation - Full Height Grille

I.{ c J'l

Model 36 42

Reveal %" %" %" %"

C 351/4'' 353/4" 411/4" 413/4"

(89.54 cm) (90.81 cm) (104.76 cm) (106.05 cm)

Standard Installation - Flush Grille

5s/4'' +

,,,,,om,,ITo ore neI

Model 36 42

Reveal %" 1/8" %" 1/8"

D 351/4'' 353/4'' 411/4" 413/4"

(89.54 cm) (90.81 cm) (104.76 cm) (106.05 cm)

E 351/4 353/4" 411/4" 413/4"

(89.54 cm) (90.81 cm) (104.76 cm) (106.05 cm)

IMPORTANT: The grille panel height, shown in the Standard

Installation Flush Grille graphic, allows for an air gap critical to

refrigerator performance.

INSTALLATIONINSTRUCTIONS

<Be ge Csot

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

IM PORTANT:

• Do not remove the film covering until the refrigerator is in its

operating location.

All four leveling legs must contact the floor to support and

stabilize the full weight of the refrigerator.

Keep the cardboard shipping piece or plywood under the

refrigerator until it is installed in the operating location.

Remove and save the literature package bag taped to the side

of the refrigerator and the parts bag behind the grille. Remove

the four brackets (two on each side) that attach the shipping

base to the refrigerator bottom.

NOTE: Do not remove tape and door bracing until the

refrigerator is in its final location.

If necessary, reduce the tipping radius. See "Tipping Radius"

for ceiling height requirements.

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

1. Place an appliance dolly under the left side of the refrigerator

as shown. Place the corner posts from the packing materials

over the trims as appropriate. Slowly tighten the strap.

2. Place pieces of the shipping carton on the floor when rolling

the dolly and refrigerator into the house. Move the refrigerator

close to the built-in opening.

3. Place top of cardboard carton or plywood under refrigerator.

4. Stand the refrigerator up. First, place the left bottom edge of

the refrigerator on the floor, stand the refrigerator upright and

then lower the right-hand side of the refrigerator to the floor.

)f"sSl'c_))A s,,,_. Boc_I_Cs

.......... b

IM PORTANT:

• If a solid soffit is not available, an anti-tip board must be

installed.

It is recommended that board(s) be installed before the

refrigerator is installed.

Board(s) must be long enough to fully cover the width of the

compressor cover.

Locate the board(s) so the bottom surface(s) of the board(s)

is(are) 84" (213 cm) from the floor.

During installation, raise the refrigerator up so there is

1/4"(6.35 mm) maximum between the top of the refrigerator

and the bottom of the anti-tip board(s). Do not crush the

compressor cover when raising the rear leveling legs.

To Install Anti-tip Boards

1. Mark the stud locations on rear wall 80" to 90" (203 cm to

229 cm) above floor.

2. Securely attach one or two 2" x 4" x 32" (5 cm x 10 cm x

81 cm) boards to wall studs behind refrigerator. Use six

#8 x 3" (7.6 cm) (or longer) wood screws. The wood screws

must be screwed into the studs at least 11/2"(3.8 cm). The

board(s) must overlap the compressor cover.

A B

2" (5 cm)

_/4" (6 mm)

max.

84 II

(213.4 cm)

A. Center board ¼" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E.Distance from bottom of anti-tip board to floor

.... ..... ...._ e W_''__< _ ' "__'

Read all directions before you begin.

IMPORTANT: Ifyou turn the refrigerator on before the water line is

connected, turn the ice maker OFE

Connect to Water Line

Parts Needed:

• Minimum 7 ft (2.13 m) flexible, codes approved water

supply line

Style 1 - Shutoff Valve Connection

NOTE: Ifyour water line connection does not look like Style 1, see

"Style 2 - Copper Line Connection."

1. Unplug refrigerator or disconnect power supply.

IMPORTANT: Before attaching the tubing to shutoff valve, flush

the main water supply line to remove particles and air in the water

line. Allow enough flow so that water becomes clear. Flushing the

water line may help avoid filters and/or water valves from

becoming clogged.

2. Connect the flexible, codes approved water supply line to the

water shutoff valve by threading the provided nut onto the

shutoff valve as shown.

A.Bulb

B.Nut

C. Watertubing

Place the end of the tubing into a bucket, and turn shutoff

valve ON.

Check for leaks. Tighten any nuts or connections (including

connections at the valve) that leak.

Style 2 - Copper Line Connection

NOTE: If there is a water supply line that meets the specifications

in "Water Supply Requirement" proceed to "Connecting to

Refrigerator." If not, use the following instructions to connect to

the household cold water supply.

1. Unplug refrigerator or disconnect power.

2. Turn OFF main water supply. Turn ON nearest faucet long

enough to clear line of water.

3. Locate a 1/2"to 1V4"(1.25 cm to 3.18 cm) vertical cold water

pipe near the refrigerator.

IM PORTANT:

• Make sure it is a cold water pipe.

• Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from

the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure

from the connection on the lower left rear of refrigerator to the

water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use V4"

(6.35 mm) O.D. (outside diameter) copper tubing. Be sure both

ends of copper tubing are cut square.

5. Using a cordless drill, drill a V4"(6.35 mm) hole in the cold

water pipe you have selected.

................. A

G •..........•...............B

"'"', ................C

A. Cold water pipe

B. Pipe clamp

C. Copper tubing

D. Compression nut

E. Compression sleeve

F. Shutoff valve

G. Packing nut

6. Fasten the shutoff valve to the cold water pipe with the pipe

clamp. Be sure the outlet end is solidly in the 1/4"(6.35 mm)

drilled hole in the water pipe and that the washer is under the

pipe clamp. Tighten the packing nut. Tighten the pipe clamp

screws slowly and evenly so washer makes a watertight seal.

Do not overtighten.

IMPORTANT: Before attaching the tubing to shutoff valve, flush

the main water supply line to remove particles and air in the water

line. Allow enough flow so that water becomes clear. Flushing the

water line may help avoid filters and/or water valves from

becoming clogged.

7. Slip the compression sleeve and compression nut on the

copper tubing as shown. Insert the end of the tubing into the

outlet end squarely as far as it will go. Screw compression nut

onto outlet end with adjustable wrench. Do not overtighten the

clamp or the sleeve. This will crush the copper tubing.

8. Turn off the shutoff valve on the water pipe. Coil the copper

tubing.

9. Connect the flexible, codes approved water supply line to the

water shutoff valve by threading the provided nut onto the

shutoff valve.

10. Place the end of the tubing into a bucket, and turn shutoff

valve ON.

11. Check for leaks around the saddle valve. Tighten any nuts or

connections (including connections at the valve) that leak.

Connect to Refrigerator

Parts Supplied:

• 1/4"to 1A" 3.35 mm to 6.35 mm) male-to-male coupling

_ _ _ _

II (2.54 cm)

t (17.78 cm)

zTi

NOTE: The flexible, codes approved water supply line can

connect to the supply valve through the floor or through the side

cabinets, as indicated by the gray boxes above.

1. Unplug the refrigerator or disconnect power.

2. Connect the 7 ft (2.13 m) flexible codes approved water tube

to the water supply valve.

3. Flush the main water supply line to remove particles and air in

the water line. Allow enough flow so that water becomes clear.

4. Tape the 7 ft (2.13 m) flexible codes approved water supply

line to the floor, 7" (17.78 cm) from the left side of the

refrigerator. Tape along the length of the tubing, which will

allow it to pass beneath the refrigerator without interference.

NOTE: Allow a minimum of 26" (66.04 cm) of flexible codes

approved water supply line to be loose at the front of the

refrigerator for connecting to the refrigerator.

Connect the 7 ft (2.13 m) flexible codes approved water

supply line to the refrigerator.

NOTE: If the main water shutoff valve is behind the

refrigerator, a secondary water shutoff valve may be installed

in line with the water supply line at the front of the product.

A.Household water line E.Bulb

B.Nut (purchased) F Nut

C.Ferrule (purchased) G.Refrigerator water tubing

D.Coupfing

Turn on the water supply valve and check all connections for

leaks.

Plug in the refrigerator or reconnect power.

Flush the water system. See "Water System Preparation."

NOTE: Allow 24 hours to produce the first batch of ice.

Discard the first three batches of ice produced. Allow 3 days

to completely fill ice container.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

1. Set control switch at top of cabinet to the OFF position.

2. Plug into a grounded 3 prong outlet.

Mo /e tge <s to , kocc on

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

A F ef ge ot

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.

Keep doors taped closed until refrigerator is

completely installed.

Use two or more people to move and install

refrigerator.

Failure to do so can result in death or serious injury.

IM PORTANT:

• To avoid floor damage, make sure levelers are raised (not

touching floor) and refrigerator is on rollers before moving.

Use the installation block, attached to the door hinge, as a

reference to make sure the refrigerator is pushed back far

enough into the opening, so that when the panels are installed

they will be flush with the adjacent cabinets.

After the refrigerator is leveled and aligned, remove the

installation block from the door hinge and use it to check the

spacing between the panels and adjacent cabinets.

NOTE: The installation block is designed to provide accurate

spacing for 3/4"(1.9 cm), 3/8"(9.53 mm) and 1/8"(3.18 mm).

¾,,_

(1.9 cm) III

_=_ _ __ '/8"

(3.18 ram)

...... _%" -

(9.53 mm)

Place top of cardboard carton or plywood under refrigerator.

Remove dolly.

Move the refrigerator straight back and evenly into the

opening. Be sure that the water tubing is not kinked and the

power supply cord is on top of the refrigerator.

NOTE: If the power supply cord is behind the refrigerator, it

will not install properly.

Make sure the installation block is flush with the adjacent

cabinets.

NOTE: To achieve aflush installation, it is critical to verify a3/4"

(1.9 cm) depth from the front face of the adjacent cabinetry to

the refrigerator.

IMPORTANT: All four leveling legs must contact the floor to

support and stabilize the full weight of refrigerator. Rollers are for

moving refrigerator and not for permanent support.

After moving the refrigerator to its final location:

1. Use a %e" socket driver to turn the leveling bolts clockwise to

extend the legs to the floor as shown. The rollers should be off

the floor.

...........................B

A. Rear leveling bolt

B. Front leveling bolt

2. Adjust the leveling legs to level and align the refrigerator from

left to right and front to back so that the refrigerator is level

and aligned with the cabinets.

3. Continue adjusting all of the leveling legs to raise the

refrigerator until the top is within at least 1/4"(6.35 mm) of the

top soffit.

3/4" (1.9 cm)

r,I II

i ...............iii .....

A.Adjacent cabinet or wall

B.Instaflationblock

C.Faceof refrigerator

NOTE: If an anti-tip board has been used, adjust the leveling

legs until the top of the refrigerator is within 1/4"(6.35 mm) of

the bottom of the anti-tip board as shown. Do not crush the

compressor cover.

2" (5 cm)

\ \\

q c

_/4" (6 mm)

max.

84"

(213.4 cm)

A. Center board ¼" (6.35 mm) max. above refrigerator

B. Two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) boards

C. Attach to studs with six #8 x 3" (7.6 cm) screws

D. Compressor cover

E.Distance from bottom of anti-tip board to floor

IMPORTANT: Adjust in small increments to keep from

damaging the cabinet trim and causing problems with the

door alignment or top grille fit. To avoid damage to the cabinet

or leveling legs, do not apply more than 50 inch-pounds

(5.65 Nm) of torque to the leveling bolts. The leveling legs can

be extended to a maximum of 11/4"(3.18 cm) below the rollers.

After leveling the refrigerator, use a straight edge or 4 foot

level going across the front of the refrigerator installation to

the cabinets to check that the refrigerator is still flush.

IMPORTANT: Jenn-Air is not responsible for the removal or

addition of molding or overlay panels that would not allow access

to the refrigerator for service.

Install Refrigerator to Adjacent Cabinets

1. Open the refrigerator door(s) and freezer drawer. On the hinge

side(s), locate the cabinet brackets in the space between the

door(s) and the refrigerator and the drawer and refrigerator.

2. Using the holes in the brackets as a template, predrill 1/8"deep

pilot holes into the adjacent cabinet.

3. Using two round head screws (provided) for each bracket,

insert the screws through the cabinet brackets and into the

adjacent cabinetry to anchor the refrigerator.

4. Repeat steps 2 and 3 to anchor the other side of the

refrigerator to the adjacent cabinetry.

Install Cabinet Side Trims

Install cabinet side trims to hide the brackets fastening the

refrigerator to the adjacent cabinets.

1. Open the door(s) to a 90° angle.

2. With the lip edge of the trim toward the back wall, insert the

cabinet side trim between the side of the refrigerator and the

adjacent cabinetry.

NOTE: Keep the top edge of the trim piece flush with the top

of the refrigerator. Installing the trim higher than the

refrigerator top could cause damage to the trim when the door

is opened.

3. Slide the trim toward the back until it snaps into place.

A ..............................

A. Cabinet side trim

B. Refrigerator door

Install Top Grille Filler (standard installation only)

IMPORTANT: The grille panel height allows the necessary airflow

for refrigerator performance. The top grille filler hides the upper

compartment cover behind the top grille. Ifyou choose to modify

the recommended grille panel dimensions, performance will be

compromised.

Custom Wood Panel Models

1. In the custom made (1" x width of grille panel) wood filler

piece, drill a hole _,46" from each edge.

NOTE: Make sure the hole is centered in the 1" thickness of

the wood piece.

2. Using slotted hex head screws (provided), fasten an "L"

bracket to each end of the wood filler piece.

3. Using hex head blunt screws (provided), attach the "L"

brackets to the top grille mounting plates.

4. Adjust the "L" brackets, so that the wood filler piece is flush

with the bottom of the soffit. Completely tighten the screws.

A. Custom wood filler

B. "L" bracket

C. Grille mounting plate

Side View

A. Top grille filler D. Grille panel

B. Soffit E. Door panel

C. Airflow

Panel Kit Models

Excessive Weight Hazard

Use two or more people to move and install panels.

Failure to do so can result in back or other injury.

Align top grille filler (provided in the door kit) with the bottom

edge of the soffit. Use as a template, and mark where to drill

the holes.

Using slotted hex head screws (provided), attach the top grille

filler to the soffit.

Side View

A. Top grille filler

B. Hex head screw (provided)

Drilling Templates (custom wood panels only)

IMPORTANT: The template can be used for either a 3/8"(0.95 cm)

or a 1/8"(0.32 cm) reveal installation.

• The drilling templates are double-sided.

• On the template, locate the diagram of your refrigerator. Then,

follow the letters and colored arrows to correctly place the

drilling template on the panels.

• The drilling holes are precut into the template.

Prepare Custom Overlay Panels

IM PORTANT:

• The process for installing overlay panels on the refrigerator is

the same for both custom panels and panel kits.

• The drilling templates are used only for custom wood overlay

panels.

The panels included in the panel kits are predrilled for the

mounting brackets only. See "Complete Installation" later in

this section, for instructions on drilling additional holes in the

door panels.

NOTE: For 36" model door panels which are right-hand swing

and left-hand swing specific use the following instructions:

• Hinge on right-hand side - Use the holes, located on the

back side of the door panel, that are circled in red.

• Hinge on left-hand side - Use the holes, located on the

back side of the door panel, that are circled in blue.

• The film covering on stainless steel door panels must be

removed before installing brackets.

1. Place panels on afirm, flat surface with the front facing down.

2. Using the templates (provided), predrill %" pilot holes into the

wood rails bordering the door(s), drawer and top grille panels.

Follow the instructions printed on the template.

3. Using the installation block as a guide for depth, screw the

door studs (provided) into the predrilled door panel (two door

studs per door).

A. Door stud

B. Installation block

Insert the hex head pointed screws (provided) into the wood at

the top of the door panels where they were predrilled.

NOTE: It is critical to use the %" screw, the longest length

provided, to attach the bracket to the top of the door panel.

These hex head pointed screws are used only to attach this

mounting bracket.

A. Soffit C. Grille panel

B. Airflow D. Door panel

Attach a mounting bracket to the top edge of the door panel(s)

by placing the large ends of the keyhole slots over the screws

and sliding the bracket so that the screws are centered in the

slots.

NOTE: Start with the screws in the center of the slots as

shown, then move the door panel, as necessary, to align.

A B

/ /

A. Door panel B.Mounting bracket

Using the Phillips head flat screws (provided), fasten a

mounting bracket to each side of the drawer panel, as shown.

........ y" S

A. Drawer panel

B. Drawer panel mounting bracket

7. Using the slotted hex head screws provided, attach a

mounting bracket to each side of the grille panel.

NOTES:

• See the Parts Provided insert sheet to select the brackets

designated for your installation.

• Use the Integrated Grille brackets for an Integrated

Installation with a full height grille.

• Use the Standard Grille brackets for a Standard

Installation with a flush grille, as shown.

8. Using round head screws (provided), attach the grille trim

piece to the bottom of the grill panel.

A. Top grille brackets

B. Grifle trim piece

Remove Trim Pieces

1. Remove all tape and door bracing from the refrigerator and

freezer doors.

2. Open the refrigerator and freezer doors.

3. Remove the hinge cover pieces from the top and bottom of

the door to expose the holes in the hinges.

NOTES:

• It is not necessary to remove the hinge side trims as they

will not interfere with the installation

• Leave the freezer drawer trims in place for installation.

A. Hinge cover pieces

B. Handle-side door trim

C. Drawer trim

Install Door Panels

Lower the panel mounting bracket onto the adjustment pins at

the top of the door.

A.Door panel C.Adjustment pins

B.Mounting bracket

Slide the studs, on the back side of the door panel, into the

"J" pockets in the front of the door.

NOTE: French door models, repeat steps 1 and 2 to install the

second door panel.

Install Top Grille Panel

Standard Installation - Flush Grille

1. Hook the panel brackets onto the mounting bolts extending

from the top of the refrigerator.

2. Pull the grille panel down slightly to lock into place.

Integrated Installation - Full Height Grille

1. Align the bracket with the mounting bolts.

2. Push the grille panel forward until the bracket snaps into

place.

Using a slotted hex head screw (provided), attach the

mounting bracket (factory installed), located at the bottom of

the refrigerator door(s), to the respective door panel(s). Do not

fully tighten the screw.

@_ O o @ J

J f !( I I ,,

A B

A. Bottom hinge

B. Mounting bracket

Install Drawer Panel

Align the slots in the mounting brackets, located on each side

of the drawer panel, with the holes that go through the drawer

trim and into the drawer.

Using Phillips head flat screws (provided), attach the brackets

to the drawer.

Move the drawer panel up and down or from side to side to

align. Do not fully tighten the screws.

A. Top grille panel

B. Cabinet sides

Door Swing Adjustment

It may be necessary to adjust the swing of the door(s). Make sure

the refrigerator door(s) can open freely. If the door(s) opens too

wide, install the door stop pin (provided).

1. Hold the door open to a position that is less than 90°.

2. Insert the door stop pin into the top hinge in the hole shown.

3. Using a 5/32"Allen wrench, tighten the door stop pin.

A.Door stop pin hole

Complete Installation

1. Use the installation block to measure the gaps between the

overlay panels and adjacent cabinets.

A. Drawer overlay panel

B. Panel mounting bracket

La page charge ...

Jenn-Air JB36NXFXLW00 Guide d'installation

Marque: Jenn-Air

Modèle: JB36NXFXLW00

Taper: Guide d'installation

Télécharger le PDF

rapport

dans d''autres langues

English: Jenn-Air JB36NXFXLW00 Installation guide
español: Jenn-Air JB36NXFXLW00 Guía de instalación

Jenn-Air JB36NXFXLW00 Guide d'installation

Jenn-Air JB36NXFXLW00 Guide d'installation

dans d''autres langues

Documents connexes

Autres documents