UEH4002A 4-port USB 2.0 CAT 5 Extender
www.aten.com
A
Revisione Hardware
UEH4002AL Vista frontale
1
LED accensione
2
Link LED
3
LED Host
4
LED di attività
UEH4002AL Vista dal
retro
5
Porta Confi gurazione
6
Int. Modo
7
Porta USB Tipo-B
8
Porta Link (RJ45)
B
Installazione Hardware
1
Utilizzare un cavo USB 2.0 (incluso in questo pacchetto) per collegare la
porta USB Tipo-B del Local Extender a una porta USB del computer.
2
Collegare un'estremità di un cavo Ethernet alla porta Link del Local
Extender.
3
Collegare l'altra estremità del cavo Ethernet alla porta Link del Remote
Extender fi no a 100 metri di distanza.
4
Inserire l'adattatore di alimentazione (incluso in questo pacchetto) in
una sorgente CA; e collegare l'altra estremità nell'alimentatore del
Remote Extender.
5
Utilizzare i cavi USB per collegare fi no a quattro periferiche USB 2.0/3.0
alle porte USB Tipo-A del Remote Extender.
UEH4002AR Vista frontale
1
Porte USB Tipo-A
2
LED accensione
3
Link LED
4
LED Host
5
LED di attività
UEH4002AR Vista dal retro
6
Connettore d'alimentazione
7
Porta Confi gurazione
8
Int. Modo
9
Porta Link (RJ45)
Extensor UEH4002A de 4 puertos USB 2.0 CAT 5
www.aten.com
A
Revisión del hardware
Vista frontal del UEH4002AL
1
LED de alimentación
2
LED de conexión
3
LED del host
4
LED de actividad
Vista posterior del
UEH4002AL
5
Puerto de confi guración
6
Interruptor de modo
7
Puerto USB tipo B
8
Puerto de conexión (RJ45)
B
Instalación del hardware
1
Utilice un cable USB 2.0 (incluido en el paquete) para conectar el
puerto USB tipo B del extensor local al puerto USB del ordenador.
2
Conecte un extremo del cable Ethernet al puerto de conexión del
extensor local.
3
Conecte el otro extremo del cable Ethernet al puerto de conexión del
extensor remoto, hasta 100 metros de distancia.
4
Enchufe el adaptador de corriente (incluido en el paquete) a una fuente
de CA y enchufe el otro extremo a la clavija de alimentación (Power)
del extensor remoto.
5
Utilice los cables USB para conectar hasta cuatro dispositivos periféricos
USB 2.0/3.0 a los puertos USB tipo A del extensor remoto.
Vista frontal del UEH4002AR
1
Puertos USB tipo A
2
LED de alimentación
3
LED de conexión
4
LED del host
5
LED de actividad
Vista posterior del
UEH4002AR
6
Conector de alimentación
7
Puerto de confi guración
8
Interruptor de modo
9
Puerto de conexión (RJ45)
UEH4002A 4-Port USB 2.0 CAT 5 Extender
www.aten.com
A
Hardware Übersicht
UEH4002AL Frontansicht
1
Netz-LED
2
Link LED
3
Host LED
4
Betriebs-LED
UEH4002AL Rückseite
5
Konfi g.-Port
6
Modusschalter
7
USB Typ-B Port
8
Link Port (RJ45)
B
Hardware Installation
1
Verwenden Sie ein USB 2.0-Kabel (im Lieferumfang enthalten), um den
USB Typ-B Port des Local Extenders an einen USB-Port des Computers
anzuschließen.
2
Schließen Sie ein Ende eines Ethernet-Kabels an den Link Port des Local
Extenders an.
3
Schließen Sie das andere Ende des Ethernet-Kabels an den Link Port
des Remote Extenders an, der bis zu 100 Meter entfernt ist.
4
Schließen Sie das Netzteil (im Lieferumfang enthalten) an eine
Wechselstromquelle an und stecken Sie das andere Ende in die
Netzbuchse des Remote Extenders.
5
Verwenden Sie USB-Kabel, um bis zu vier USB 2.0/3.0 Peripheriegeräte
an die USB Typ-A Anschlüsse des Remote Extenders anzuschließen.
UEH4002AR Frontansicht
1
USB Typ-A Ports
2
Netz-LED
3
Link LED
4
Host LED
5
Betriebs-LED
UEH4002AR Rückseite
6
Netzbuchse
7
Konfi g.-Port
8
Modusschalter
9
Link Port (RJ45)
Répéteur USB 2.0 CAT 5 à 4 ports UEH4002A
www.aten.com
A
Présentation du matériel
UEH4002AL vue de face
1
LED d'alimentation
2
LED Link (Liaison)
3
LED d'hôte
4
LED d'activité
UEH4002AL vue de dos
5
Port de confi guration
6
Commutateur de mode
7
Port USB Type B
8
Port Link (Liaison) (RJ45)
B
Installation matérielle
1
Utilisez un câble USB 2.0 (inclus dans ce paquet) pour connecter le port
USB Type-B du répéteur local à un port USB de l'ordinateur.
2
Connectez une extrémité d'un câble Ethernet au port de liaison du
répéteur local.
3
Connectez l'autre extrémité du câble Ethernet au port de liaison du
répéteur distant, jusqu'à 100 mètres.
4
Branchez l'adaptateur secteur (fourni avec ce paquet) à une source
d'alimentation secteur ; et branchez l'autre extrémité à la prise
d'alimentation du répéteur distant.
5
Utilisez des câbles USB pour connecter jusqu'à quatre périphériques
USB 2.0/3.0 aux ports USB Type A du répéteur distant.
UEH4002AR vue de face
1
Ports USB Type A
2
LED d'alimentation
3
LED Link (Liaison)
4
LED d'hôte
5
LED d'activité
UEH4002AR vue de dos
6
Prise d'alimentation
7
Port de confi guration
8
Commutateur de mode
9
Port Link (Liaison) (RJ45)
UEH4002A 4-port USB 2.0 CAT 5 Extender
www.aten.com
A
Hardware Review
UEH4002AL Front View
1
Power LED
2
Link LED
3
Host LED
4
Activity LED
UEH4002AL Rear View
5
Confi g Port
6
Mode Switch
7
USB Type-B Port
8
Link Port (RJ45)
B
Hardware Installation
1
Use a USB 2.0 cable (included with this package) to connect the Local
Extender’s USB Type-B Port to a USB port on the computer.
2
Connect one end of an Ethernet cable to the Local Extender’s Link port.
3
Connect the other end of the Ethernet cable to the Remote Extender’s
Link port, up to 100 meters away.
4
Plug the power adapter (included with this package) into an AC source;
and plug the other end into the Remote Extender's Power Jack.
5
Use USB cables to connect up to four USB 2.0/3.0 peripheral devices to
the Remote Extender’s USB Type-A ports.
A
Hardware Review
B
Hardware Installation
© Copyright 2017 ATEN
®
International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
This product is RoHS compliant.
Part No. PAPE-1223-K30G
Printing Date: 10/2017
4-port USB 2.0 CAT 5 Extender
Quick Start Guide
UEH4002A
UEH4002AR Front View
1
USB Type-A Ports
2
Power LED
3
Link LED
4
Host LED
5
Activity LED
UEH4002AR Rear View
6
Power Jack
7
Confi g Port
8
Mode Switch
9
Link Port (RJ45)
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and
specifi cations contained in this package are subject to change without
prior notifi cation bythe manufacturer.
To reduce the environmental impact of our products, ATEN
documentation and software can be found online at
http://www.aten.com/download/
Technical Support
www.aten.com/support
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적
으로 하며, 모든 지역에서 사용할 수 있습니다.
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT:
This equipment has been tested and found to comply with
the limits for a Class B digital service, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. Any changes or modifi cations made to this
equipment may void the user s authority to operate this
equipment. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
- Consult the dealer/an experienced radio/television technician for help.
FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Scan for
more information
UEH4002AL Front View
UEH4002AR Front View
UEH4002AL Rear View
UEH4002AR Rear View
Cat 5/6e Ethernet Cable
4
1
2
3
5
4
1
1
2
3
2 4
3 5
7
8
5
6
8
9
6
7
Package Contents
1 UEH4002AL 4-Port Cat 5 USB
2.0 Extender (Local unit)
1 UEH4002AR 4-Port Cat 5 USB
2.0 Extender (Remote unit)
1 AC Power Adapter
1 USB 2.0 Type-A to Type-B
Cable (1.8m)
1 User Instructions
4-портовый повторитель UEH4002A 4-port USB 2.0 CAT 5 Extender
www.aten.com
A
Обзор оборудования
Передняя панель UEH4002AL
1
Светодиодный индикатор
питания
2
Светодиодный индикатор
соединения
3
СД-индикатор хоста
4
СД-индикатор активности
Задняя панель UEH4002AL
5
Порт конфигурации
6
Переключатель режимов
7
Порт USB (типа B)
8
Порт соединения (RJ45)
B
Установка оборудования
1
С помощью кабеля USB 2.0 (из комплекта поставки) подключите порт
USB (типа B) локального повторителя к порту USB на компьютере.
2
Подсоедините один конец кабеля Ethernet к порту соединения
локального повторителя.
3
Подсоедините другой конец кабеля Ethernet к порту соединения
удаленного повторителя, который находится на расстоянии до 100
метров.
4
Подсоедините адаптер питания (из комплекта поставки) к источнику
питания переменного тока . разъему DC-IN устройства, и подключите
выходной кабель адаптера к гнезду питания удаленного повторителя.
5
С помощью кабелей USB подключите до четырех периферийных
устройств USB 2.0/3.0 к портам USB (типа A) удаленного повторителя.
Передняя панель UEH4002AR
1
Порты USB (типа A)
2
Светодиодный индикатор питания
3
Светодиодный индикатор
соединения
4
СД-индикатор хоста
5
СД-индикатор активности
Задняя панель UEH4002AR
6
Разъем питания
7
Порт конфигурации
8
Переключатель режимов
9
Порт соединения (RJ45)
*The Confi g Port / Mode Switch are reserved
for use by the manufacturer.