Haier WS120GA Le manuel du propriétaire

Marque: Haier

Modèle: WS120GA

Catégorie: Boissons glacées

Taper: Le manuel du propriétaire

Ce manuel convient également à

WS190GA

Wine Cellar

WS120GA WS190GA

Names of Wine Cellar Components

Top wine shelf

Wine shelves

Adjustable

foot screw

Glass door

Master control panel

WS120GA WS190GA

(117bottlecapacity) (189bottlecapacity)

Heading 1

IMPORTANT SAFEGUARDS ............................................................. 4

Installing Your Wine Cellar.............................................................. 5

Unpacking Your Wine Cellar ............................................................................................. 5

Leveling Your Wine Cellar ................................................................................................. 5

Proper Air Circulation........................................................................................................ 5

Electrical Requirement ...................................................................................................... 6

Install Limitations............................................................................................................... 6

Use of Extension Cord....................................................................................................... 6

Initial Setup ......................................................................................................................... 6

Introduction to Primary Functions of the Appliance ..................... 7

1.Temperature Adjustment ............................................................................................. 7

2.Interior Light ...................................................................................................................... 7

3.“°F/°C” Conversion. ....................................................................................................... 7

4.Door opening alarm ...................................................................................................... 8

5.Temperature Power-Off Memory ..................................................................................... 8

6.Power ................................................................................................................................ 8

Precautions for Use of Wine Cellar................................................. 9

Automatic Defrosting......................................................................................................... 9

Shelving............................................................................................................................. 10

Normal Operating Sounds You May H

ear ..................................................................... 10

TroubleShooting ............................................................................ 12

Technical Data ............................................................................ 13

Table Of Contents

Page

Proper Wine Cellar Care and Cleaning ......................................... 11

Packing List ............................................................................ 13

Heading 1

This appliance is intended to be used exclusively for the storage of wine.

When using this appliance, always exercise basic safety precautions,

including the following:

1. Read all of the instructions before using this appliance.

2. Use this appliance only for its intended purpose as described in this use

and care guide.

3. This wine cellar must be properly installed in accordance with the

installation instructions before it is used. See grounding instructions in the

installation section.

4. It is intended strictly for household usesuch as

– staff kitchen areas in shops, offices and other working environments;

– farm houses and by clients in hotels, motels and other residential type

environments;

– bed and breakfast type environments;

– catering and similar non-retail applications.

5. This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way and understand

the hazards involved. Children shall not play with the appliance.

6. The appliance must be positioned so that the plug is accessible.

7. If the supply cord is damaged, it must be replaced by the manufacturer, its

8. Keep ventilation openings, in the appliance enclosure or in the built-in

structure, clear of obstruction.

9. Do not use mechanical devices or other means to accelerate the defrosting

process, other than those recommended by the manufacturer.

10. Do not damage the refrigerant circuit.

11. Do not use electrical appliances inside the food storage compartments

of the appliance, unless they are of the type recommended by the

manufacturer.

12. If the light is damaged, it must be replaced by the manufacturer, its service

13. This appliance is intended to be used exclusively for the storage of wine.

15. Risk of child entrapment. Before you throw away your old wine cellar, take

off the doors. Leave the shelves in place so that children may not easily

climb inside.

14.

propellant in this appliance.

IMPORTANT SAFEGUARDS

16. Please contact the service agent to dispose the appliance because the

flammable refrigerant and flammable blowing gas was used.

17. Refrigerants are flammable , should be careful when you do the installation,

handling, servicing.

Heading 1

Installing Your Wine Cellar

Unpacking Your Wine Cellar

1. Remove all packaging material. This includes the foam base and all adhesive tape holding

the wine cellar accessories inside and outside.

2. Inspect and remove any remains of packing, tape or printed materials before powering on the

wine cellar.

Leveling Your Wine Cellar

• Your wine cellar has four leveling legs which are located in the front and rear corners of your

wine cellar.

• Leveling legs can be adjusted by turning them clockwise to raise your wine cellar or by turning

them counterclockwise to lower your wine cellar. The wine cellar door will close easier when

the leveling legs are extended.

Proper Air Circulation

•

install it in a location where there is proper air circulation, plumbing and electrical connections.

• The following are recommended clearances around the wine cellar:

Sides ................4" (100mm)

Top ...................4" (100mm)

Back .................4" (100mm)

•

Note: If your wine cellar has been tilted for any reason, wait 24 hours before plugging it in.

More than

10 cm

from the top

More than

10 cm

from the right

High Low

Adjustable

foot screw

than

10 cm

from the rear

More than

10 cm

from

the left

Heading 1

Electrical Requirement

• Make sure there is a suitable power Outlet (220-240V, 15 amps outlet) with proper grounding

to power the wine cellar.

• An independent and exclusive standard outlet with reliable grounding shall be used for the

wine cellar by matching its 3-pin plug including the grounding pin,which shall never be removed

or disconnected with the grounding wire in any circumstances.

Install Limitations

• Do not install your wine cellar in any location not properly insulated or heated e.g. garage etc.

Your wine cellar was not laid to operate if the ambient temperature is below 10°C.

• Select a suitable location for the wine cellar on a hard even surface away from direct

sunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etc.

unevenness should be corrected with the leveling legs located on the front and rear bottom

corners of the wine cellar.

• Your wine cellar is designed for free-standing installation only. It is not designed for built-in

application.

Use of Extension Cord

• Avoid the use of an extension cord because of potential safety hazards under certain

conditions. If it is necessary to use an extension cord, use only a 3-wire extension cord that

has a plug with 2 round pins and 1 slot and an outlet with 2 slots and 1 round pin that will

accept the plug. The marked rating of the extension cord must be equal to or greater than the

electrical rating of the appliance.

Initial Setup

Once you have plugged the unit into an electrical outlet, let the unit run for at least 30 minutes

to acclimatize itself before making any adjustments. During this time, depending on the internal

temperature, the red or white wine light will stay on for the upper compartment and red or white wine

light will stay on for the lower compartment. The LED display will show the current internal temperature.

Heading 1

Introduction to Primary Functions of the Appliance

Temperature Adjustments

To set the temperature hold the button for about 3 seconds. Then the temperature

display of IN.T° flashes . Press the or button to increase or decrease the

temperature setting. Once the desired temperature is attained, press the button.

Control Panel

The temperature range of display panel is 5～20°C（41～68°F）.

The default setting temperature is 12°C（54°F）.

You can set the temperature according to your wine storage requirements.

Interior Light

Compliment the look of your collection, a soft light has been built into the wine cellar.

Simply push the button and the light comes on, push again for off.

When door is open the light will go on. Upon closing the door, light will go off.

“°F/°C” Conversion

Press and hold for 3 seconds, the displayed temperature in Fahrenheit degree

and °F character will convent to temperature in Celsius degree and “°C” character.

Press and hold for 3 seconds again, the temperature in Celsius degree

and “°C” character will convert to temperature in Fahrenheit degree and “°F” character.

Temperature

Adjustment

(up)

Light

SET

Power

Temperature

Adjustment

(down)

SET LIGHT

POWER

OUT.T° IN.T°

Heading 1

Door opening alarm

In case the door is kept open for over 1 min, buzzer will be beeping to give an alarm till

the door is closed or any key on display panel can be operated and then the buzzer will

stop beeping.

Power

Temperature Power-Off Memory

In case of a power outage, the cellar will automatically save the set temperature.

After power recovery,it will run based on the temperature set before the power

outage while other functions will return to the default status.

Holding the key for 3 seconds, the main power will turn off (power for all electrical

devices inside will be cut off and the whole appliance will be in standby).

If the device is off, the power can be turned on by holding the key for 3 seconds,

and then all icons on the display screen will turn on.

Heading 1

Do not place too much wine in the cellar so

as not to exceed the bearing capacity of the

wine shelves. Do not place more than four

layers of wine on each shelf. The number of

wine bottles should not exceed four layers on

each shelf, and the bearing capacity of the wine

shelves should not exceed 35kg.

Before placing the bottles inside the wine

shelves are completely stable.

bottle protrudes from the shelves in order

to prevent bottles hitting the glass door

upon closing.

Precautions for Use of Wine Cellar

Automatic Defrosting

The way in which wines continue to mature depends on the ambient conditions. The quality of

the lower area of the rear wall of the appliance to ensure that the air through put remains at an

optimum quality.

CAUTION

a year. Filters can be obtained from your dealer.

Insert with the handle in a vertical position. Turn it to the

right and insert.

This appliance has an automatic defrosting function.

During use, ensure that the drainage hole is unblocked so

the drainage hole into the water receiver

inside the cellar cabin.

Regularly clean water tank at the bottom of the compartments; use a dry

cloth to absorb water inside the water tank and wipe down them (clean them every three

months as suggested).

Heading 1

Shelving

• The shelves are designed for appearance and easy cleaning. Larger bottles or Magnums can

be more easily accommodated at the cross shelves at the bottom of the cellar.

• There are some shelves for easy storage and removal of your wine.

Normal Operating Sounds You May Hear

• Water flowing sound or slight vibrations that are the result of the refrigerant

circulating through the cooling coils.

• The compressor will click when it cycles on and off.

Heading 1

Cleaning and Maintenance

Warning:

To avoid electric shock always unplug your wine cellar before cleaning. Ignoring

this warning may result in death or injury.

Caution:

Before using cleaning products, always read and follow manufacturer's

instructions and warnings to avoid personal injury or product damage.

General:

• Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm

water. Use sponge or soft cloth, dampened with the cleaning solution, to wipe

down your wine cellar.

• Rinse with clean warm water and dry with a soft cloth.

• Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated

detergents, solvents or metal scouring pads. SOME of these chemicals may

dissolve, damage and/or discolor your wine cellar.

Door Gaskets:

• Clean door gaskets every three months.

Gaskets must be kept clean and pliable to assure a proper seal.

• Petroleum jelly applied lightly on the hinge side of gaskets will keep the gasket

pliable and assure a good seal.

Wine Shelf:

If the wine shelf was accidentally sprinkled with wine or water droplets, please

use 300-400 sandpaper to polish, then use soft cloth to wipe down the sawdust.

Do not use towel or soft cloth with water.

Power Interruptions

• Occasionally there may be power interruptions due to thunderstorms or other causes.

Remove the power cord from AC outlet when a power outage occurs. When power has

been restored, replug power cord to AC outlet.

Vacation and Moving Care

• For long vacations or absences, unplug the wine cellar and clean the wine cellar and

door gaskets. Leave doors open, so air can

circulate inside.

• When moving always move the wine cellar vertically. Do not move with the unit lying

down, as possible damage to the sealed system could occur.

Note: After moving, wait for 24 hours before plugging in the wine cellar.

Proper Wine Cellar Care and Cleaning

Heading 1

Wine Cellar Does Not Operate:

• Check if wine cellar is plugged in.

• Check if there is power in the AC outlet, by checking the circuit breaker.

Wine appears too warm:

• Frequent door openings.

• Allow time for recently added wine to reach desired temperature.

• Check gaskets for proper seal.

• Please contact the service agent to clean condenser coils.

• Adjust temperature control to colder setting.

Wine temperature is too cold:

• If temperature control setting is too cold, adjust to a warmer setting.

Wine cellar runs too frequently:

• This may be normal to maintain constant temperature during high temperature and humid days.

• Doors may have been opened frequently or for an extended period of time.

• Please contact the service agent to clean condenser coils.

• Check gasket for proper seal.

• Check to see if doors are completely closed.

Moisture build up on interior or exterior of the wine cellar:

• This is normal during high humidity periods.

• Prolonged or frequent door openings.

• Check door gaskets for proper seal.

Wine cellar door does not shut properly:

• Level the wine cellar.

• Check for blockages e.g. wine bottles, shelves.

Do not dispose of electrical appliances as unsorted

municipal waste, use separate collection facilities.

Contact you local government for information

regarding the collection systems available. If

dumps, hazardous substances can leak into the

groundwater and get into the food chain, damaging

your health and well-being. When replacing old

appliances with new ones, the retailer is legally

obligated to take back your old appliance for

disposals at least free of charge.

TroubleShooting

Heading 1

Technical Data•Packing List

Technical Data

Packing List

This appliance is being developed continuously. We reserve the right to change the components

of the wine cellar without notice.

Model Climate Tape

Available

Capacity

(l)

Rated

Voltage (V)

Rated

Frequency

(Hz)

Input Power

(W)

WS120GA I 220 220-240 50 110

WS190GA I 385 220-240 50 100

Temperature

Range

(°C)

Refrigerant

(R600a)

(g)

Supply Cord

Connection

Mode

Weight

(kg)

Noise

(Acoustic

Power Level)

dB (A)

Overall Dimension

(Depth × Width ×Height)

(mm)

5-20 45 Y 69 38 639×595×1,265

5-20 75 Y 94 38 639×595×1,850

Remarks:

1. According to international standards, if the climate is an SN-ST type, the ambient temperature for use of the

wine cellar ranges between 10°C and 38°C.

"Noise (acoustic power level)" marked in the technica

data refers to a situation in which the semi-anechoic

rubber cushion as thick as 5 mm to 6 mm is placed inside. It can run for at least 30 minutes after the door is

closed. A test will be conducted after stable running (excluding startup and shutdown). Ground noise will be

tested at 1 m from the front, rear, left and right surfaces of the wine cellar respectively.

During use, it is normal that the actual noise is different from the marked noise due to the effects of the

type of wine stored in the wine cellar, ambient noise, door opening and closing, compressor startup and

shutdown, etc.

room is set up as thick as specified according to national standards,in the case of an empty wine cellar,a resilient

User

Guide

Information

Kit

Wine

shelves

Through-

hole Pin

Key

WS120GA 1 1 4 1 2

WS190GA 1 1 7 1 2

Name

Quantity

Product Model

SN-ST

Electric Shock

Resistance

Type

Intestazione 1

Nomi dei componenti della cantina

Ripiano

superiore

per i vini

Ripiani

per vino

Sportello in vetro

Filtro ai carboni attivi

Vite del piede

regolabile

Pannello di controllo

principale

(capacità:

117 bottiglie)

(capacità:

189 bottiglie)

WS120GA WS190GA

Intestazione 1

MISURE DI SICUREZZA IMPORTANTI ........................................... 16

Installazione della cantina............................................................ 17

Disimballaggio della cantina per vini ............................................................................ 17

Messa in piano della cantina per vini ............................................................................ 17

Circolazione adeguata dell'aria...................................................................................... 17

Requisiti elettrici .............................................................................................................. 18

Limitazioni per l'installazione......................................................................................... 18

Utilizzo di cavi di prolunga.............................................................................................. 18

urazione iniziale.................................................................................................... 18

Introduzione alle funzioni fondamentali dell'apparecchio........... 19

1.Regolazioni della temperatura ..................................................................................... 19

2.Luce interna ....................................................................................................... 19

3.Conversione “°F/°C” ...................................................................................................19

4.Allarme apertura porta ..................................................................................................20

5.Memoria di spegnimento temperatura.........................................................................20

6.Potenza ............................ ................................................................................. 20

Precauzioni per l'uso della cantina............................................... 21

Sbrinamento automatico................................................................................................. 21

Ripiani................................................................................................................................ 22

Rumori durante il funzionamento .................................................................................. 22

Pulizia e manutenzione corrette della cantina per vini ............................................... 23

Risoluzione dei problemi............................................................... 24

Dati tecnici

Lista di imballaggio

...................................................................... 25

Sommario

Pagina

...................................................................... 25

Intestazione 1

Questo apparecchio è concepito per essere utilizzato esclusivamente

per la conservazione del vino.

Durante l'utilizzo dell'apparecchio, seguire sempre le precauzioni di

sicurezza basilari, tra cui:

1. Leggere tutte le istruzioni prima di utilizzare l'apparecchio.

2. Utilizzare l'apparecchio solo per lo scopo previsto, in base a quanto

descritto nella presente guida relativa all'utilizzo e alla manutenzione.

3. Prima dell'utilizzo, la cantina per vini deve essere accuratamente installata

in conformità alle istruzioni di installazione fornite. Vedere le istruzioni sulla

messa a terra nella sezione relativa all'installazione.

4. L'apparecchio è destinato esclusivamente all'uso domestico. Se utilizzato

per scopi industriali o commerciali, assicurarsi di osservare le normative in

materia. L'apparecchio può essere utilizzato da bambini di età superiore

oppure con mancanza di esperienza e conoscenza, solo se sorvegliati

o se adeguatamente istruiti in merito all'utilizzo sicuro dell'apparecchio

e agli eventuali rischi connessi. Non lasciare che i bambini giochino con

l'apparecchio. Le operazioni di pulizia e di manutenzione non dovranno

essere volte da bambini senza la supervisione di un adulto.

5. Posizionare l'apparecchio in modo che la spina sia facilmente accessibile.

6. Se il cavo di alimentazione è danneggiato, contattare il produttore, un

7. Mantenere libere da ostruzioni le aperture di ventilazione nell'involucro

dell'apparecchio o nella struttura a incasso.

8. Non utilizzare nessuno strumento per accelerare il processo di

sbrinamento, ad eccezione di quelli consigliati dal produttore.

9. Non danneggiare il circuito del refrigeratore.

10. Non utilizzare apparecchi elettrici nei vani di conservazione degli alimenti,

ad eccezione di quelli di tipo consigliato dal produttore.

11. In caso di danneggiamento, la spia deve essere sostituita dal produttore,

12. Questo apparecchio è concepito per essere utilizzato esclusivamente per

la conservazione del vino.

13. Rischio di intrappolamento bambini. Prima di disfarsi di una vecchia

cantina per vini, è opportuno rimuovere gli sportelli. Non rimuovere i ripiani

per evitare che i bambini possano introdursi all'interno.

14. Non conservare sostanze esplosive come bombolette di aerosol con

MISURE DI SICUREZZA IMPORTANTI

Intestazione 1

Installazione della cantina

Disimballaggio della cantina per vini

1. Rimuovere tutto il materiale di imballaggio, inclusa la base in schiuma e il nastro adesivo che

2. Ispezionare e rimuovere eventuali rimanenze dell'imballaggio o di nastro e qualsiasi materiale

stampato prima dell'accensione della cantina.

Messa in piano della cantina per vini

• La cantina è dotata di quattro piedini per la messa in piano, posizionati agli angoli anteriori

• I piedini possono essere regolati, ruotandoli in senso orario per alzare la cantina e in senso

antiorario per abbassarla. L'estensione completa dei piedini agevola la chiusura e l'apertura

dello sportello.

Circolazione adeguata dell'aria

• Per garantire il funzionamento ottimale della cantina, è necessario installare l'apparecchio

in una posizione che consenta un'adeguata circolazione dell'aria e in cui siano presenti

i collegamenti elettrici e l'impianto idraulico corretti.

• Spazio libero consigliato attorno alla cantina:

Lati ........................... 100 mm

Piano superiore ........ 100 mm

Retro ........................ 100 mm

• Non sovraccaricare la cantina per consentire un corretto raffreddamento del vino.

Nota: se, per qualche motivo, la cantina è stata inclinata, attendere 24 ore prima di collegarla

all'alimentazione.

Più di

10 cm

dalla parte superiore

Più di

10 cm

dalla

parte destra

Stringere Allentare

Vite del

piede

regolabile

Più di

10 cm

dalla parte

posteriore

Più di

10 cm

dalla parte

sinistra

Intestazione 1

Requisiti elettrici

• V, 15 amp) con messa a terra

corretta, per l'alimentazione della cantina.

• Evitare l'utilizzo di adattatori tripolari o l'adattamento a una presa bipolare eliminando il polo

della messa a terra. Si tratta di un'operazione pericolosa poiché elimina la messa a terra

necessaria per la cantina, con conseguente pericolo di scosse elettriche.

Limitazioni per l'installazione

• Non installare la cantina in luoghi non adeguatamente isolati o riscaldati, ad esempio nei

garage. La cantina non è predisposta per il funzionamento a temperature inferiori ai 10°C.

•

luce diretta del sole e lontana da fonti di calore, come radiatori, riscaldatori a zoccolo,

apparecchiature per la cucina ecc. Eventuali dislivelli del pavimento possono essere

compensati regolando i piedini posizionati agli angoli anteriori e posteriori della cantina.

• La cantina è progettata per essere installata solo autonomamente e non in strutture

a incasso.

Utilizzo di cavi di prolunga

• Evitare l'utilizzo di cavi di prolunga che, in alcune condizioni, possono causare potenziali

rischi per la sicurezza. Se è necessario utilizzare un cavo di prolunga, utilizzare solo un cavo

di prolunga trifase con spina di tipo europeo (2 terminali e un foro) e una presa apposita in

grado di accettare la presa. La tensione elettrica del cavo deve essere uguale o superiore a

quella indicata per l'apparecchio.

Configurazione iniziale

Dopo aver collegato l'unità a una presa elettrica, lasciarla in funzione per almeno 30 minuti per

stabilizzare la temperatura, prima di procedere con le regolazioni desiderate. Durante tale intervallo

di tempo, a seconda della temperatura interna, la luce dei vini rossi o bianchi resterà accesa per

lo scomparto superiore e l'altra resterà accesa per lo scomparto inferiore. Sul display LED verrà

visualizzata la temperatura interna corrente.

Heading 1

Introduzione alle funzioni primarie dell’apparecchiatura

Regolazioni della temperatura

Per impostare la temperatura tenere premuto il pulsante per circa 3 secondi. Quindi il

display della temperatura di IN.T° lampeggia. Premere il pulsante o per aumentare

o ridurre l’impostazione di temperatura. Dopo aver raggiunto la temperatura desiderata,

premere il pulsante .

Pannello di controllo...........

La gamma di temperatura del pannello del display è 5～20°C（41～68°F）.

La temperatura di impostazione predefinita è di 12°C（54°F）.

Luce interna

A completamento della vostra collezione, abbiamo aggiunto una luce tenue nella

cantinetta dei vini. Basta premere il pulsante e si accende la luce, premere

nuovamente per spegnerla.Quando la porta è aperta la luce si accende.

Alla chiusura della porta la luce si spegne.

Conversione “°F/°C”

Premere e tenere premuto per 3 secondi, la temperatura visualizzata in Fahrenheit e

il carattere °F convertiranno la temperatura in gradi Celsius insieme al carattere “°C”.

Premere e tenere premuto nuovamente per 3 secondi; la temperatura in gradi Celsius

e il carattere “°C” convertiranno la temperatura in gradi Fahrenheit insieme al carattere “°F”.

Temperatura

Regolazione

(su

)

Luce

forno

IMPOSTA

POTENZA

( giù

)

Temperatura

Regolazione

Sarà possibile impostare la temperatura a seconda dei propri requisiti per la conservazione

del vino.

SET LIGHT

POWER

OUT.T° IN.T°

Heading 1

Allarme apertura porta

Qualora la porta venga tenuta aperta per più di 1 minuto, il cicalino continuerà a

emettere dei bip come allarme fino a che non verrà chiusa la porta o qualsiasi tasto

sul pannello display non potrà essere usato e poi il cicalino smetterà di fare bip.

Potenza

Memoria di spegnimento temperatura

In caso di black-out la cantinetta salva in modo automatico la temperatura impostata.

Dopo il ripristino della corrente, funzionerà sulla base della temperatura impostata

prima del black-out mentre le altre funzioni tornando allo stato predefinito..

Tenendo premuto il tasto per 3 secondi, l’alimentazione principale si spegne

(l’alimentazione per tutti i dispositivi interni verrà disattivata e il dispositivo sarà in

standby).Se il dispositivo è spento, l’alimentazione potrà essere attivata tenendo

premuto il tasto per 3 secondi, e poi tutte le icone sulla schermata del display

si accendono.

La page charge ...

Haier WS120GA Le manuel du propriétaire

Marque: Haier

Modèle: WS120GA

Catégorie: Boissons glacées

Taper: Le manuel du propriétaire

Ce manuel convient également à

WS190GA

Télécharger le PDF

rapport

dans d''autres langues

italiano: Haier WS120GA Manuale del proprietario
English: Haier WS120GA Owner's manual
español: Haier WS120GA El manual del propietario
Deutsch: Haier WS120GA Bedienungsanleitung
Nederlands: Haier WS120GA de handleiding
polski: Haier WS120GA Instrukcja obsługi
čeština: Haier WS120GA Návod k obsluze

Haier WS120GA Le manuel du propriétaire

Ce manuel convient également à

Haier WS120GA Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents