Thrustmaster 2960818 Manuel utilisateur

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ΕΛΛΗΝΙΚΑ

TÜRKÇE

POLSKI

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

繁體中文

1/12

PC

User Manual

TECHNICAL SPECIFICATIONS

1 Detachable lever (not installed by default)

2 Lever attachment arms

3 HANDBRAKE / SEQUENTIAL SHIFTER

selector

4 Mechanical switching system (for

switching between the HANDBRAKE and

SEQUENTIAL SHIFTER modes)

5 DIN cable and female connector on base

6 Detachable male DIN / USB cable

7 13 mm wrench key

8 3 mm Allen wrench

9 6 mm Allen wrench

10 2 BTR M8 screws + 2 M8 nuts

2/12

WARNING

Before using this product, be sure to read through this manual carefully. Retain this manual for

future reference.

Warning – Electric shock

* Keep this product in a dry place, and do not expose it to dust or sunlight.

* Respect the direction of insertion for connectors.

* Do not twist or pull on the connectors and cables.

* Do not spill liquid on the product or its connector.

* Do not short-circuit the product.

* Do not dismantle this product (apart from for the possible adjustments described in this manual),

do not attempt to burn the product and do not expose the product to high temperatures.

* Avoid playing for extended periods of time.

* Take a 10 to 15 minute break after each hour of playing.

* Should you experience fatigue or pain in your hands, wrists or arms, stop playing and rest for a

few hours before starting to play again.

* If the symptoms or pains described above persist when you resume playing, stop playing and

consult your doctor.

* Verify that the base of the shifter is properly mounted, as described in the instructions found in this

manual.

Warning – Pinching risk in shift plate openings

* Keep out of the reach of children.

* When playing a game, never place your fingers (or any other parts of your body) in the openings in

the shift plates of the TSS HANDBRAKE.

NEVER

3/12

INSTALLING THE DETACHABLE LEVER (1) ON THE ATTACHMENT ARMS (2)

1. Slide the detachable lever (1) between the attachment arms (2).

2. Adjust the lever at the desired height.

The lever’s total height (knob included) can be adjusted between 21 cm and 30 cm.

3. Attach the lever to the attachment arms using 2 BTR M8 screws (10), 2 M8 nuts (10) and the 6 mm

Allen wrench (9).

4/12

CONFIGURING THE HANDBRAKE MODE

By default (when unboxing the device), the TSS HANDBRAKE is configured in the HANDBRAKE

mode.

1. The HANDBRAKE / SHIFTER selector (3) is lowered in the HANDBRAKE mode position.

Front face of base

2. The mechanical system that lets you switch from the HANDBRAKE mode to the SEQUENTIAL

SHIFTER mode (4) is preset in the HANDBRAKE position.

Left side of base

Right side of base

5/12

CONFIGURING THE SEQUENTIAL SHIFTER MODE

1. Raise the HANDBRAKE / SHIFTER selector (3) in the SEQUENTIAL SHIFTER mode position.

Front face of base

2. To switch from the HANDBRAKE mode to the SEQUENTIAL SHIFTER mode (4), use the 3 mm

Allen wrench (8) to slightly unscrew the mechanical system’s screws (2 screws, located to either

side of the base).

3. Move these 4 screws (2 screws, located on either side of the base) to the SEQ position.

Left side of base

Right side of base

4. Check that these 4 screws (2 on either side of the base) are perfectly repositioned, then tighten

them using the 3 mm Allen wrench (8).

6/12

INSTALLING THE TSS HANDBRAKE

The TSS HANDBRAKE can be attached to a variety of compatible supports (sold separately), using

the M6 threaded holes located on either side of the device and under its base:

• 3 threaded holes are located on the left side of the base.

• 3 threaded holes are located on the right side of the base.

• 8 threaded holes are located under the base.

The TSS HANDBRAKE cockpit installation template is available from

http://support.thrustmaster.com. Select Racing Wheels / TSS HANDBRAKE, then Template -

Cockpit Setup.

7/12

DO NOT TIGHTEN OR LOOSEN THESE SCREWS

With the exception of the screws relating to the mechanical system used to switch from the

HANDBRAKE mode the SEQUENTIAL SHIFTER mode (4), never tighten or loosen any screws

located on the TSS HANDBRAKE base.

Left side of base = Never tighten or loosen these screws:

Right side of base = Never tighten or loosen these screws:

Front and rear sides of base = Never tighten or loosen these screws:

8/12

INSTALLATION INSTRUCTIONS FOR PC

1. Go to http://support.thrustmaster.com to download the PC drivers.

Select Racing Wheels / TSS HANDBRAKE, then select Drivers.

2. Once the download is finished, run the installation program, then follow the instructions displayed to

connect the TSS HANDBRAKE’s USB connector to your PC and complete the installation process.

3. Once the installation is finished, click Finish and restart your computer.

4. Select Start / All Programs / Thrustmaster / TH8 Shifter / Control Panel to open the Game Controllers

window.

The Game Controllers window displays the name TSS HANDBRAKE Sparco® Mod, with the status OK.

5. Click Properties to view the TSS HANDBRAKE in the Windows Control Panel:

9/12

GENERAL NOTES FOR PC

* Remember to always completely close the Game Controllers window by clicking on OK before

starting your game.

* The TSS HANDBRAKE’s firmware version is displayed in the upper right section of the Control Panel

tabs.

* On PC, the Thrustmaster shifter can be used with:

- All games compatible with the multi-USB feature and handbrake devices;

- All currently available racing wheels.

* We recommend connecting your racing wheel and the TSS HANDBRAKE directly to the USB 2.0 (not

USB 3.0) ports on your PC, without using a hub.

- Some games let you use 2 TSS HANDBRAKE devices simultaneously:

• 1 TSS HANDBRAKE configured in HANDBRAKE mode;

• 1 TSS HANDBRAKE in SEQUENTIAL SHIFTER mode.

UPDATING THE TSS HANDBRAKE’S FIRMWARE

The firmware included in the TSS HANDBRAKE’s base can be updated (meaning that it can be

upgraded to a more recent version, featuring product enhancements).

To display the TSS HANDBRAKE’s firmware version and update it, if required: on a PC, go to

http://support.thrustmaster.com, select Racing wheels / TSS HANDBRAKE, then select Firmware

and follow the instructions and the download and installation procedure.

ADVANCED CALIBRATION SOFTWARE

The TSS HANDBRAKE’s calibration procedure is automatic.

An advanced calibration software application for PC is also available at

http://support.thrustmaster.com: select Racing Wheels / TSS HANDBRAKE, then Software. This

software allows you to adjust the following:

• Analog travel in HANDBRAKE mode;

• Analog travel in SEQUENTIAL SHIFTER mode.

Any adjusted settings are immediately saved to TSS HANDBRAKE’s internal memory.

TIPS & HINTS (not stated in this manual)

Various tips and hints are available from the http://support.thrustmaster.com website; select Racing

Wheels/ TSS HANDBRAKE.

10/12

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P.

97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this

Thrustmaster product shall be free from defects in materials and workmanship, for a warranty period

which corresponds to the time limit to bring an action for conformity with respect to this product. In

the countries of the European Union, this corresponds to a period of two (2) years from delivery of

the Thrustmaster product. In other countries, the warranty period corresponds to the time limit to

bring an action for conformity with respect to the Thrustmaster product according to applicable laws

of the country in which the consumer was domiciled on the date of purchase of the Thrustmaster

product (if no such action exists in the corresponding country, then the warranty period shall be one

(1) year from the original date of purchase of the Thrustmaster product).

Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6)

months from the date of original purchase.

Should the product appear to be defective during the warranty period, immediately contact

Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the product

must be returned to its place of purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s

option, be either replaced or returned to working order. If, during the warranty period, the

Thrustmaster product is subject to such reconditioning, any period of at least seven (7) days during

which the product is out of use shall be added to the remaining warranty period (this period runs

from the date of the consumer’s request for intervention or from the date on which the product in

question is made available for reconditioning, if the date on which the product is made available for

reconditioning is subsequent to the date of the request for intervention). If permitted under

applicable law, the full liability of Guillemot and its subsidiaries (including for consequential

damages) is limited to the return to working order or the replacement of the Thrustmaster product. If

permitted under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a

particular purpose.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered

damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any

other cause unrelated to a material or manufacturing defect (including, but not limited to, combining

the Thrustmaster product with any unsuitable element, including in particular power supplies,

rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product);

(2) if the product has been used for any use other than home use, including for professional or

commercial purposes (game rooms, training, competitions, for example); (3) in the event of failure to

comply with the instructions provided by Technical Support; (4) to software, said software being

subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s

lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to

accessories (cables, cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at

public auction.

This warranty is nontransferable.

The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or

her country are not affected by this warranty.

11/12

Additional warranty provisions

During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical

Support is the only party authorized to open and/or recondition any Thrustmaster product (with the

exception of any reconditioning procedures which Technical Support may request that the

consumer carry out, by way of written instructions – for example, due to the simplicity and the lack

of confidentiality of the reconditioning process – and by providing the consumer with the required

spare part(s), where applicable).

Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall

not provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product

whose warranty period has expired.

In the United States of America and in Canada, this warranty is limited to the product’s internal

mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any

third party for any consequential or incidental damages resulting from the breach of any express or

implied warranties. Some States/Provinces do not allow limitation on how long an implied warranty

lasts or exclusion or limitation of liability for consequential or incidental damages, so the above

limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you

may also have other rights which vary from State to State or Province to Province.

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its

subsidiaries disclaim all liability for any damages caused by one or more of the following: (1) the

product has been modified, opened or altered; (2) failure to comply with assembly instructions; (3)

inappropriate or abusive use, negligence, an accident (an impact, for example); (4) normal wear; (5)

the use of the product for any use other than home use, including for professional or commercial

purposes (game rooms, training, competitions, for example). If permitted under applicable law,

Guillemot and its subsidiaries disclaim all liability for any damages unrelated to a material or

manufacturing defect with respect to the product (including, but not limited to, any damages caused

directly or indirectly by any software, or by combining the Thrustmaster product with any unsuitable

element, including in particular power supplies, rechargeable batteries, chargers, or any other

elements not supplied by Guillemot for this product).

TECHNICAL SUPPORT

http://support.thrustmaster.com

12/12

DECLARATION OF CONFORMITY

CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment on and off, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

COPYRIGHT

Guillemot Corporation S.A. Sparco is a registered trademark of Sparco S.p.A. All other trademarks are

the property of their respective owners. Illustrations not binding. Contents, designs and specifications

are subject to change without notice and may vary from one country to another. Manufactured and

distributed by Guillemot Corporation S.A. under official license from Sparco S.p.A. Made in China.

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union: At the end of its working life, this product should not be

disposed of with standard household waste, but rather dropped off at a collection

point for the disposal of Waste Electrical and Electronic Equipment (WEEE) for

recycling.

This is confirmed by the symbol found on the product, user manual or packaging.

Depending on their characteristics, the materials may be recycled. Through recycling

and other forms of processing Waste Electrical and Electronic Equipment, you can

make a significant contribution towards helping to protect the environment.

Please contact your local authorities for information on the collection point nearest you.

For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.

Retain this information. Colors and decorations may vary.

Plastic fasteners and adhesives should be removed from the product before it is used.

www.thrustmaster.com

*Applicable to EU and Turkey only

*

1/12

PC

Manuel de l’utilisateur

CARACTÉRISTIQUES TECHNIQUES

1 Levier amovible (non installé par défaut)

2 Bras de fixation du levier

3 Sélecteur FREIN À MAIN / SÉQUENTIEL

4 Système mécanique pour basculer de

FREIN À MAIN vers SÉQUENTIEL

5 Câble et connecteur DIN femelle de la

base

6 Câble détachable DIN mâle / USB.

7 Clé plate 13 mm

8 Clé Allen 3 mm

9 Clé Allen 6 mm

10 2 vis CHC M8 + 2 écrous M8

2/12

AVERTISSEMENT

Avant d’utiliser ce produit, lisez attentivement cette documentation et conservez-la pour pouvoir la

consulter ultérieurement.

Avertissement – Chocs électriques

* Conservez le produit dans un endroit sec et ne l’exposez ni à la poussière ni au soleil.

* Respectez les sens de branchement.

* Ne tordez pas et ne tirez pas sur les connecteurs et câbles.

* Ne renversez pas de liquide sur le produit et son connecteur.

* Ne mettez pas le produit en court-circuit.

* Ne démontez jamais le produit (hormis pour les réglages possibles notifiés dans ce manuel), ne le

jetez pas au feu et ne l’exposez pas à des températures élevées.

Avertissement – Blessures dues aux mouvements répétitifs

Jouer avec une boîte de vitesses ou un frein à main peut causer des douleurs aux muscles et aux

articulations. Afin d’éviter tout problème :

* Evitez les périodes trop longues de jeu.

* Faites une pause de 10 à 15 minutes après chaque heure de jeu.

* Si vous éprouvez fatigue ou douleur au niveau des mains, des poignets ou des bras, cessez de jouer

et reposez-vous pendant quelques heures avant de recommencer à jouer.

* Si les symptômes ou les douleurs indiqués ci-dessus persistent lorsque vous reprenez le jeu, arrêtez

de jouer et consultez votre médecin.

* Vérifiez que la base du TSS HANDBRAKE est correctement fixée, conformément aux instructions du

manuel.

Avertissement – Risque de pincement au niveau des grilles de passage de vitesses

* Laissez hors de portée des enfants.

* Lors des phases de jeu, ne placez jamais vos doigts (ou autres parties du corps) dans les grilles du

TSS HANDBRAKE.

JAMAIS

3/12

INSTALLATION DU LEVIER AMOVIBLE (1) SUR LES BRAS DE FIXATION (2)

1. Insérez le levier amovible (1) dans ses bras de fixation (2).

2. Positionnez le levier à la hauteur qui vous convient.

La hauteur totale du levier (pommeau inclus) est ajustable de 21 cm à 30 cm.

3. Fixez l'ensemble à l’aide des 2 vis CHC M8 (10), des 2 écrous M8 (10) et de la clé Allen 6 mm (9).

4/12

INSTALLATION DU MODE FREIN À MAIN

Par défaut (à la sortie de sa boîte), le TSS HANDBRAKE est préinstallé en mode FREIN À MAIN.

1. Le sélecteur FREIN À MAIN / SÉQUENTIEL (3) est positionné vers le bas en position FREIN À

MAIN.

Façade de la base

2. Le système mécanique permettant de basculer de FREIN À MAIN vers SÉQUENTIEL (4) est

préinstallé en position FREIN À MAIN.

Côté gauche de la base

Côté droit de la base

5/12

INSTALLATION DU MODE SÉQUENTIEL

1. Positionnez le sélecteur FREIN À MAIN / SÉQUENTIEL (3) vers le haut, en position

SÉQUENTIEL.

Façade de la base

2. A l’aide de la Clé Allen 3 mm (8), dévissez légèrement (de chaque côté de la base) les 2 vis du

système mécanique pour basculer de FREIN À MAIN vers SÉQUENTIEL (4).

3. Déplacez ces 4 vis (2 de chaque côté de la base) vers la position SEQ.

Côté gauche de la base

Côté droit de la base

4. Vérifiez que ces 4 vis (2 de chaque côté de la base) sont parfaitement repositionnées, puis

revissez-les à l’aide de la clé Allen 3mm (8).

6/12

FIXATION DU TSS HANDBRAKE

Le TSS HANDBRAKE peut-être fixé sur divers supports compatibles (vendus séparément) via

différents pas de vis type M6 situés de chaque côté et sous sa base :

• 3 pas de vis sont situés sur le côté gauche de la base.

• 3 pas de vis sont situés sur le côté droit de la base.

• 8 pas de vis sont situés sous la base.

Le plan d’implantation du TSS HANDBRAKE pour les cockpits est disponible sur

http://support.thrustmaster.com : cliquez sur Volants / TSS HANDBRAKE, puis sur Template -

Cockpit Setup.

7/12

VIS A NE PAS DEREGLER

À l'exception du système mécanique permettant de basculer de FREIN À MAIN vers SÉQUENTIEL (4),

ne déréglez jamais les autres vis situées sur la base du TSS HANDBRAKE.

Côté gauche de la base = ne déréglez jamais ces vis :

Côté droit de la base = ne déréglez jamais ces vis :

Façade et arrière de la base = ne déréglez jamais ces vis :

La page charge ...

Thrustmaster 2960818 Manuel utilisateur

Thrustmaster 2960818 Manuel utilisateur

dans d''autres langues

Documents connexes