GE LDFN4542B Le manuel du propriétaire

Catégorie
Lave-vaisselle
Taper
Le manuel du propriétaire
OWNER'S MANUAL
MFL69261732
Rev.03_111620
www.lg.com
Copyright © 2020 LG Electronics Inc. All Rights Reserved.
Read this owner's manual thoroughly before operating the appliance
and keep it handy for reference at all times.
DISHWASHER
EN ENGLISH SP ESPAÑOL FC FRANÇAIS
LDF554#** LDFN454**
2
TABLE OF CONTENTS
3 PRODUCT FEATURES
4 SAFETY INSTRUCTIONS
4 IMPORTANT SAFETY INSTRUCTIONS
9 PRODUCT OVERVIEW
9 Exterior Parts
10 Interior Parts
10 Accessories
11 INSTALLATION
11 Installation Parts and Tools
12 Installation Overview
12 Product Dimensions
12 Product Specifications
13 Preparing Cabinet Opening
14 Preparing Water and Electrical Connections
15 Preparing Dishwasher
16 Attaching Installation Brackets
17 Sliding Dishwasher into Cabinet Opening
19 Connecting Water Supply Line and Power
21 Connecting Drain Hose
23 Leveling Dishwasher
25 Securing Dishwasher to Cabinet Opening
26 Final Installation Check
27 OPERATION
27 Using the Appliance
28 Control Panel
29 Cycles
30 Options
31 Cycle/Option Guide
32 Loading the Dishwasher
32 Loading the Lower Rack
34 Loading the Silverware Basket
35 Loading the Upper Rack
37 Loading the Cutlery Rack
38 Adding Cleaning Agents
40 SMART FUNCTIONS
40 LG ThinQ Application
41 Smart Diagnosis™ Function
42 MAINTENANCE
42 Cleaning the Exterior
42 Cleaning the Interior
42 Seasonal Maintenance and Storage
43 Clogged Drain Air Gap or
In-Sink Disposal
44 Cleaning the Filters
45 Cleaning the Spray Arms
46 TROUBLESHOOTING
46 FAQs: Frequently Asked Questions
48 User Support Videos
49 Before Calling for Service
53 LIMITED WARRANTY
53 FOR USA
57 LIMITED WARRANTY
57 FOR CANADA
61 Warranty Exceptions (U.S and Canada)
3PRODUCT FEATURES
ENGLISH
PRODUCT FEATURES
QuadWash™ System
Multi-Motion lower spray arm shoots water in various directions and at optimized intensities to reach every area
of the tub. This system provides more powerful and complete cleaning coverage.
Inverter Direct Drive Motor
LG's experience in motor technology results in extraordinary functionality, with advanced features like the Dual
Zone option, whisper-quiet operation, energy efficiency, and durability.
The simple design and high build quality of the motor make it so reliable that it's covered for 10 years under the
warranty.
EasyRack Plus
This easy-to-use system of adjustable tines and rack height provides more flexibility and versatility when
loading dishes of various shapes and sizes.
Hybrid Drying System
This efficient drying system does not use a heating element during the drying process resulting in superior
energy efficiency and gentle care for dishes.
LG ThinQ
Download the new LG smart phone app to set options, self-diagnose and troubleshoot problems with the
appliance, and other useful features. Some of these functions use Wi-Fi or NFC (Near Field Communication)
technology and require an NFC-equipped smart phone.
4 SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and
follow all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or injure you and others.
All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION.
These words mean:
WARNING
You may be killed or seriously injured if you do not follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and
tell you what may happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock, scalding or injury
to persons when using this product, follow basic precautions, including the
following:
INSTALLATION
Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.
To reduce the risk of severe injury or death, follow all installation instructions.
The appliance must be installed and electrically grounded by qualified service personnel in accordance with
local codes.
Disconnect the power supply line, house fuse or circuit breaker before installing or servicing the appliance.
When moving or installing the product in a different location, call qualified service personnel for installation
and service.
Keep packing materials out of the reach of children. Packaging material can be dangerous for children.
There is a risk of suffocation.
Moving or installation of the appliance requires two or more people.
This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or aircraft.
5SAFETY INSTRUCTIONS
ENGLISH
Store and install the appliance where it will not be exposed to temperatures below freezing or exposed to
outdoor weather conditions.
This appliance must be positioned near to an electrical power supply.
Do not, under any circumstances, cut or remove the ground from the power supply line.
When installing or moving the appliance, be careful not to pinch, crush, or damage the power supply line.
Do not install the appliance in humid spaces.
Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children might
use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has
missing or broken parts, including a damaged power supply line.
Adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety
glasses.
The installer must ensure that the dishwasher is completely enclosed at the time of installation.
Use new hoses when connecting the appliance to the water supply. Do not reuse old hoses.
After installing, check the hose connection for leaks.
Do not damage or place heavy items on the power supply line of the appliance.
OPERATION
Repair or immediately replace all power supply lines that have become frayed or otherwise damaged. Do
not use a power supply line that shows cracks or abrasion damage along its length or at either end.
If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it
immediately, and contact an LG Electronics customer information center.
Never unplug the appliance by pulling on the power supply line.
Do not use an extension cable or adapter with this appliance.
Do not grasp the power supply line or touch the appliance controls with wet hands.
Do not modify or extend the power cable.
If the product has been submerged, contact an LG Electronics customer information center for instructions
before resuming use.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.),
gasoline, chemicals and other flammable vapors and liquids.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
If the electrical supply line is damaged, it must only be replaced by the manufacturer or its service agent or
a similar qualified person in order to avoid a hazard.
Do not abuse, sit on, or stand on the door of the appliance.
Read all instructions before using the appliance and save these instructions.
Use this appliance only for its intended purpose.
6 SAFETY INSTRUCTIONS
Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when
the appliance is used near children.
Do not tamper with controls.
In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a
window or door to ventilate the area immediately.
Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used
for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for
such a period, before using the appliance turn on all hot water faucets and let the water flow from each for
several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or
use an open flame during this time.
Fix the drain hose securely in place.
Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the
reach of children.
Do not let children eat detergent or dishwasher rinse agent.
When loading items to be washed:
- Locate sharp items so that they are not likely to damage the door seal.
- Load sharp knives with the handles up to reduce the risk of cut-type injuries.
Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not
so marked, check the manufacturer’s recommendations.
Do not touch the HEATING ELEMENT during or immediately after use.
Do not operate your dishwasher unless all ENCLOSURE panels are properly in place.
Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
Do not install or store the dishwasher where it will be exposed to weather conditions.
After cleaning the dishes, turn off the faucet. Turn on the faucet again and check the connection status of
water supply hose before cleaning.
Do not open the door while operating. For safety reasons, the drain pump operates if the door is opened,
resulting in a longer cycle time.
Be careful not to catch your hand when closing the door of the product.
Do not plug the dishwasher into a damaged outlet.
Do not install or keep the dishwasher near electrical components or exposed flames.
Do not wash dishes exposed to gasoline, solvents or other flammable materials.
When cleaning, do not spray water on the product directly.
Do not press buttons with a sharp object such as an awl or pin.
Do not use solvent-based detergent.
Do not come into contact with the steam outlet.
Small parts, such as rack clips and filter retaining posts can be a choke hazard to small children if removed
from the dishwasher. Keep out of reach of small children.
7SAFETY INSTRUCTIONS
ENGLISH
MAINTENANCE
Do not repair or replace any part of the appliance. All repairs and servicing must be performed by qualified
service personnel unless specifically recommended in this Owner’s Manual. Use only authorized factory
parts.
Do not disassemble or repair the appliance by yourself.
Remove any dust or foreign matter from the power supply line.
Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this appliance from the power supply.
Remove the door before the appliance is removed from service or discarded to avoid the danger of children
or small animals getting trapped inside.
Unplug the appliance before cleaning to avoid the risk of electric shock.
Before discarding the appliance, cut off the power supply line and destroy the appliance's control panel.
GROUNDING INSTRUCTIONS
For a permanently connected dishwasher: This appliance must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead to the appliance.
Connect the ground wire to the green ground connector in the terminal box.
TIP OVER HAZARD
Do not use the dishwasher until completely installed.
Do not push down on the open dishwasher door.
Failure to follow these instructions may result in serious injury or cuts.
SAVE THESE INSTRUCTIONS
8 SAFETY INSTRUCTIONS
CAUTION
To reduce the risk of minor injury to persons, malfunction, or damage to the
product or property when using this product, follow basic precautions, including
the following:
INSTALLATION
Install the product on a firm and level floor.
This dishwasher must be connected to a hot water supply with a temperature range between 120 °F (49 °C)
and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time. The
temperature should not exceed 149°F (65 °C) to prevent damage to dishes.
Do not put the drain hose under the dishwasher during installation.
OPERATION
Do not place objects on top of the appliance.
Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period of
time, such as during vacations.
Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the
appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.
Do not touch draining water which may be hot.
If the drain hose and the water supply hose are frozen in winter, defrost before using the appliance.
Do not put hands, feet, or metal objects below or behind the appliance.
Do not put the drain hose under the dishwasher during installation.
MAINTENANCE
If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of the
product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or abrasives.
These substances may discolor or damage the appliance.
9PRODUCT OVERVIEW
ENGLISH
PRODUCT OVERVIEW
Exterior Parts
2
3
7
1
4
8
6
5
1
Control Panel & Door Handle
2
Front Cover
3
Lower Cover
4
Shipping Brace
5
Safety Cover
6
SignaLight™ (some models)
7
Base
8
Leveling Feet
NOTE
Do not remove the safety cover at any time.
To ensure reliability, each LG dishwasher goes through thorough quality control before it leaves the factory.
You may find water droplets or water spots from this process inside your new dishwasher.
SignaLight (Front Display)
The top-control models have 3 indicator LEDs centered at the top of the front cover.
Red : Error (See the Error Codes in Troubleshooting section.)
White (steady): Normal operation.
White (blinking): Cycle has been paused. (After four minutes in pause mode, the machine turns off.)
Green: Cycle finished normally.
The default “ON” setting keeps the green light on until the door is opened. If the setting is changed to “OFF”,
the green light turns off after 90 seconds. To change the setting, turn the power on and press and hold the
High Temp button for 3 seconds until “ON” or “OFF” appears in the display. The setting is stored until you
change it.
10 PRODUCT OVERVIEW
NOTE
The silverware basket ships installed at the back
of the bottom rack. For best performance, install it
along the right side as shown in the Interior Parts
section.
Remove all packing materials from the exterior
and interior of the dishwasher before installing the
appliance.
2
3
Accessories
Included Accessories
Installation
brackets
(2ea)
Wood screws
(4ea)
Hose clamp
(1ea)
Press the tab to remove the cable tie by hand.
Cutting the tie with a knife or scissors may damage
the rack or the silverware basket.
Interior Parts
9
6
10
5
3
4
8
2
7
1
1
Top Wash Impeller
2
Upper Spray Arm
3
Lower Spray Arm
4
Filtration System
5
Detergent and Rinse Aid Dispenser
6
Drying Vent Cover
7
Cutlery Rack (some models)
8
Upper Rack
9
Silverware Basket
10
Lower Rack (appearance may vary)
11INSTALLATION
ENGLISH
INSTALLATION
Installation Parts and Tools
Parts not Provided
Electrical cable Water supply tube Fittings for tube Coupler Electrical tape
Air gap Wire nuts for
16-gauge wiring
Hose clamp UL approved
strain relief
Tools Needed
Flat-blade
screwdriver
Phillips
screwdriver
Hole saw
min. 2½” bit
Electrical drill Gloves
Safety glasses Adjustable wrench Tape measure Utility knife Level
¼” Square
drive wrench
Nipper Pliers Wire stripper Tubing cutter
⅜” Square drive
wrench + ½” Socket
12 INSTALLATION
Installation Overview
Preparing Cabinet Opening
Preparing Electrical Wiring
Preparing Water Supply Connection
Preparing the Dishwasher
Removing Lower Cover
Sliding the Dishwasher into Cabinet
Leveling the Dishwasher
Securing the Dishwasher to Countertop
Connecting the Drain Hose
Connecting Water Supply
Connecting Power
Final Check
Product Dimensions
Back view Side view
33 /16"
(846 mm)
5
23 /4" (603 mm)
3
4 /2"
(115 mm)
1
33 /8"
(854 mm)
5
2 /16" (75 mm)
15
20 /16" (512 mm)
3
24 /8" (625 mm)
5
4 /4" (120 mm)
3
9 /8"
(238 mm)
3
4 /16"
(119 mm)
5
/4"
(134 mm)
11
1
4 /2"
(115 mm)
1
Water supply hose, drain hose and electric cable should be passed
through this area.
NOTE
For easiest installation, see marked areas above for water and electrical clearances in base of dishwasher.
Product Specifications
The appearance and specifications listed in this manual may vary due to constant product improvements.
Electrical requirement 120 V, 60 Hz AC only, minimum 15 A circuit breaker
Water pressure 20 - 80 psi (140 - 550 kPa)
Dimensions
23
3
/4"(W) X 24
5
/8"(D) X 33
5
/8"(H)
603 mm(W) X 625 mm(D) X 854 mm(H)
Inlet water temperature 120 °F (49 °C) minimum, 149 °F (65 °C) maximum
Net weight 75 - 89 lbs. (34 - 40 kg)
13INSTALLATION
ENGLISH
Preparing Cabinet Opening
This dishwasher is designed to fit a standard
dishwasher opening. An opening may be needed
on both sides to route plumbing and electrical
connections.
To ensure proper drainage, install the dishwasher
no more than 12 ft. (3.65 m) from the sink.
The location must have sufficient space for the
dishwasher door to open easily and provide at
least 0.1” (2 mm) between the dishwasher and the
cabinet sides.
If installing the dishwasher in a corner, leave a
minimum of 2” (50 mm) between the dishwasher
and the adjacent wall.
The adjacent wall must be free of obstructions.
For flush installations only, you may remove the
cabinet brace inside the cabinet.
1
Select a location as close to the sink as
possible for easy connections to water supply
line, drain hose and electrical connection.
22
22
2
To allow for proper clearance of plumbing and
electrical, use the template included with the
literature to determine the clearance on the
side of the cabinet where the cabinet meets
the back wall. Using a 2
1
/2” diameter hole saw,
drill a hole in the target area as shown on the
template.
3.5
''
2.5
''
4
''
WARNING
Installation damage is not covered by the
warranty, and leaks caused by improper
installation may result in property damage.
Do not use existing holes unless they are in the
target area.
Failure to properly locate the hole for the water
and drain lines may prevent the dishwasher
from installing flush with the cabinets and could
result in kinked, pinched, crushed, stressed or
damaged lines.
14 INSTALLATION
Preparing Water and
Electrical Connections
There are 2 channels in the bottom of the dishwasher
for routing the water and electrical connections. As
shown in the bottom view below, channel is for the
water supply line, and channel is for the electrical
cable.
1
Turn off the house water supply and the circuit
breaker or dedicated power before connecting
the dishwasher.
2
Run the water supply line along the floor 6
1
/2
7
3
/4” (165–197 mm) from the left side of the
opening and tape it in place in front of the
opening.
3
Run the electrical cable along the floor
14–16” (356–406 mm) from the water supply line
and tape it in place.
• The electrical outlet must be within 4 ft. (1.22
m) of either side of the dishwasher.
• The best location for the electrical conduit is
on the right side of the back wall. Re-route
the electrical cable before installation if the
electrical conduit pipe is longer than 3” (76
mm) and is centered on the back wall.
WARNING
Water Connection
Do not reuse an old hose. Use only a new hose
when installing the dishwasher. The old hose
could leak or burst causing flooding and property
damage. Contact an LG Customer Information
Center for assistance in buying a new hose.
Electrical Connection
Use a time-delay fuse or circuit breaker.
Operate this appliance with the correct voltage
as shown in this manual and on the rating plate.
The wiring must be grounded properly. If in
doubt, have it checked by a qualified electrician.
Connect the appliance using 3-wires, including a
ground wire.
The appliance and outlet must be positioned so
that the plug is easily accessible.
Do not use an extension cable or adapter with
this dishwasher.
Do not overload the outlet with more than one
appliance.
The included 16AWG wire nuts should be used.
It is the personal responsibility and obligation
of the product owner to have a proper outlet
installed by a qualified electrician.
CAUTION
When connecting the dishwasher water supply
line to the house water supply, sealing tape or
compound should be used on pipe threads to
avoid leaks. Tape or compound should not be
used on compression fittings.
Connect the dishwasher to a hot water supply
with a temperature range between 120 °F (49
°C) and 149 °F (65 °C). This temperature range
provides the best washing results and shortest
cycle time. To prevent damage to dishes, the
temperature should not exceed 149 °F (65 °C).
Water supply pressure must be between 20 psi
and 80 psi (140–550 kPa). If the water supply
pressure exceeds 80 psi, a pressure reducing
valve must be installed. Otherwise premature
failure of the inlet valve may occur.
15INSTALLATION
ENGLISH
Preparing Dishwasher
WARNING
Do not remove safety cover . Removal can
result in fire, electric shock or death.
Releasing Drain Hose
Remove the twist tie holding the drain hose to the
back of the shipping brace.
Removable Shipping Brace
The rear shipping brace can be removed if additional
clearance is needed when installing the dishwasher
under a low countertop.
Removing Lower Cover
1
Remove the screws at either side which attach
the lower cover to the dishwasher.
2
Remove the lower cover.
3
If there is insulation padding behind the lower
cover, remove it.
4
Set the parts aside until the installation is
complete.
CAUTION
If you lay the dishwasher on its back, do so
carefully to avoid damaging the drain hose and
the tub.
16 INSTALLATION
Removing Packing Materials from the
Interior
Remove all packing materials from the interior of the
dishwasher before installing the appliance.
2
3
Attaching Installation
Brackets
For countertops made of wood or other material
that will not be damaged by drilling, use the metal
installation brackets provided.
For countertops made of granite, marble, or other
materials that could be damaged by drilling, use the
wood screws to attach the dishwasher to the cabinet.
See installation instructions in Securing Dishwasher
to Cabinet Opening.
NOTE
Installation brackets and screws can be found in the
silverware basket.
1
Insert the tabbed end of the installation brackets
into the slots in the upper frame. Rotate the
brackets until the tabbed ends are facing up.
2
Bend the tabs on the brackets to secure them to
the frame using a pair of needle nose pliers.
17INSTALLATION
ENGLISH
Sliding Dishwasher into
Cabinet Opening
CAUTION
Do not pull or lift the dishwasher using the
handle . Doing so can damage the door and
hinges.
Do not push the door of the dishwasher with
knees when sliding the dishwasher into position.
Doing so can damage the front cover.
Do not push the top of the dishwasher. Doing so
can damage the interior of the dishwasher.
NOTE
Open the door and grab the body frame and the
top front opening of the tub to move or lift the
dishwasher.
1
Align the dishwasher with the opening. Make
sure the water supply line and electrical cable
are in the correct positions to slide into their
channels properly.
2
Smooth out or pad the edges of the hole drilled
for the water supply to avoid damaging the drain
hose.
18 INSTALLATION
3
Make sure the drain hose is straight before
feeding the end of it through the hole for the
water supply. As you slide the dishwasher into
the opening, you will want to slowly pull on the
drain hose from inside the cabinet to take up
some slack. Be careful not to kink, pinch, crush
or stress the drain hose during installation to
avoid leaking and water damage.
4
Gradually slide the dishwasher into the opening,
making sure that the water supply line and
electrical cable are passing freely through the
channels and do not get caught under the
dishwasher.
• As you slide the dishwasher into the opening,
stop periodically (or have an assistant help)
to take up the slack by pulling the drain hose
farther into the cabinet.
CAUTION
To avoid malfunctions or leakage, it is important
that the drain hose not get kinked, pinched,
stressed or crushed behind or under the
dishwasher or inside the neighboring cabinet.
Damage resulting from improper installation is
not covered under the warranty.
5
Remove the tape from the water supply line and
the electrical cable.
19INSTALLATION
ENGLISH
Connecting Water Supply
Line and Power
Connecting Water Supply Line
1
With the home water supply turned off, connect
the water supply line to the inlet valve on the left
front of the dishwasher.
CAUTION
Tape or compound should not be used on
dishwasher inlet valve.
2
Tighten the compression nut.
3
Slide the water supply line back through the
channel, pulling gently from inside the cabinet
to make sure the line is not kinked, pinched,
stressed or crushed.
Connecting Power
The dishwasher should have a dedicated properly
grounded branch circuit to connect the 3 wire setup
which includes the ground wire.
If a 3-prong power supply is used, it should be in an
accessible location adjacent to the dishwasher within
4 ft. (1.22 m) of the dishwasher side and not behind
the dishwasher.
NOTE
The best location for the electrical conduit is on the
right side of the back wall. Re-route the electrical
cable before installation if the electrical conduit pipe
is longer than 3” (76 mm) and is centered on the
back wall.
1
Turn off electrical power to the unit at the circuit
breaker.
2
Use a Phillips screwdriver to remove the screw
from the junction box cover and remove the
cover.
3
Use a Phillips screwdriver to remove 2 screws
.
4
Remove the junction box from the appliance.
20 INSTALLATION
5
Insert a strain relief through the hole in the
junction box. Tighten the ring nut to secure it
in place.
6
Insert the electrical cable through the hole in
the strain relief. Tighten 2 screws to secure the
cable.
7
Pull the existing wires through the openings
in the junction box. Tighten 2 screws to
reassemble the junction box in the appliance.
8
Pair the white, black, and green wires to the
matching colored wires from the dishwasher.
Then twist on the provided wire nuts tightly to
connect the corresponding wires.
9
Wrap electrical tape around each connection.
10
Fold the connected wires back into the junction
box and screw on the junction box cover.
WARNING
Verify that the black wire is hot (120 V). If not,
or if you are unsure of the power supply, have it
checked by a licensed electrician.
CAUTION
Do not leave stripped wire exposed. Trim
stripped wire to fit completely inside wire nuts.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180

GE LDFN4542B Le manuel du propriétaire

Catégorie
Lave-vaisselle
Taper
Le manuel du propriétaire

dans d''autres langues