AEG LF6G9454RM Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
USER
MANUAL
EN User Manual 2
Washing Machine
FR Notice d'utilisation 38
Lave-linge
LF6G9454RM
CONTENTS
1. SAFETY INFORMATION.............................................................................................3
2. SAFETY INSTRUCTIONS.............................................................................................5
3. INSTALLATION............................................................................................................6
4. ACCESSORIES........................................................................................................... 11
5. PRODUCT DESCRIPTION.........................................................................................11
6. CONTROL PANEL..................................................................................................... 13
7. DIAL AND BUTTONS................................................................................................14
8. PROGRAMMES .........................................................................................................17
9. SETTINGS...................................................................................................................20
10. BEFORE FIRST USE.................................................................................................21
11. DAILY USE................................................................................................................21
12. HINTS AND TIPS..................................................................................................... 26
13. CARE AND CLEANING.......................................................................................... 27
14. TROUBLESHOOTING.............................................................................................31
15. CONSUMPTION VALUES.......................................................................................34
16. TECHNICAL DATA..................................................................................................35
17. QUICK GUIDE.........................................................................................................35
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler - features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
www.aeg.com
2
1. SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damage that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away from the appliance unless continuously
supervised.
Children of less than 3 years of age should be kept
away from the appliance unless continuously
supervised.
Do not let children play with the appliance.
Keep all packaging away from children and dispose of
it appropriately.
Keep detergents away from children.
Keep children and pets away from the appliance when
the door is open.
If the appliance has a child safety device, it should be
activated.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2
General Safety
Do not change the specification of this appliance.
This appliance is intended to be used in household
and similar applications such as:
ENGLISH
3
staff kitchen areas in shops, offices and other
working environments;
by clients in hotels, motels, bed & breakfast and
other residential type environments;
areas for communal use in blocks of flats or in
launderettes.
Do not exceed the maximum load of 9 kg (refer to the
"Programme chart" chapter).
The operating water pressure at the water entry point
from the outlet connection must be between 0.5 bar
(0.05 MPa) and 8 bar (0.8 MPa).
The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
The appliance must be connected to the water mains
using the new supplied hose sets, or other new hose
sets supplied by the Authorised Service Centre.
Old hose sets must not be reused.
If the mains power supply cable is damaged, it must
be replaced by the manufacturer, its Authorised
Service Centre or similarly qualified persons to avoid
an electrical hazard.
Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
Do not use high pressure water sprays and/or steam
to clean the appliance.
Clean the appliance with a moist cloth. Use only
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
If a tumble dryer is stacked on the top of the washing
machine, make sure to use the correct stacking kit
approved by AEG (see more details in chapter
"Accessories - Stacking kit").
www.aeg.com
4
2. SAFETY INSTRUCTIONS
2.1 Installation
The installation must comply
with relevant national
regulations.
Remove all the packaging and the
transit bolts including rubber bush
with plastic spacer.
Keep the transit bolts in a safe place.
If the appliance is to be moved in the
future they must be reattached to lock
the drum to prevent an internal
damage.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Follow the installation instructions
supplied with the appliance.
Do not install or use a damaged
appliance.
Do not install or use the appliance
where the temperature can be less
than 0°C or where it is exposed to the
weather.
The floor area on which the appliance
is to be installed must be flat, stable,
heat resistant and clean.
Make sure that there is air circulation
between the appliance and the floor.
When the appliance is in its
permanent position, check if it is
levelled correctly with the aid of a
spirit level. If it is not, adjust the feet
accordingly.
Do not install the appliance directly
above a floor drain.
Do not spray water on the appliance
and do not expose it to excessive
humidity.
Do not install the appliance where the
appliance door cannot be fully
opened.
Do not put a closed container to
collect possible water leakage under
the appliance. Contact the Authorised
Service Centre to ensure which
accessories can be used.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
The appliance must be earthed.
Always use a correctly installed
shockproof socket.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not touch the mains cable or the
mains plug with wet hands.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
2.3 Water connection
Do not cause damage to the water
hoses.
Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
Ensure that there are no visible water
leaks during and after the first use of
the appliance.
Do not use an extension hose if the
inlet hose is too short. Contact the
Authorised Service Centre for the
replacement of the inlet hose.
When unpacking the appliance, It is
possible to see water flowing from the
drain hose. This is due to the testing
of the appliance with the use of water
in the factory.
ENGLISH
5
You can extend the drain hose to
maximum 400 cm. Contact the
Authorised Service Centre for the
other drain hose and the extension.
Make sure that there is access to the
tap after the installation.
2.4 Use
WARNING!
Risk of injury, electric shock,
fire, burns or damage to the
appliance.
Follow the safety instructions on the
detergent packaging.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not wash fabrics which are heavily
soiled with oil, grease or other greasy
substances. It can damage rubber
parts of the washing machine.
Prewash such fabrics by hand before
loading them into the washing
machine.
Do not touch the glass door while a
programme operates. The glass can
get hot.
Make sure that all metal objects are
removed from the laundry.
2.5 Service
To repair the appliance contact the
Authorised Service Centre.
Use original spare parts only.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains electrical and water supplies.
Cut off the mains electrical cable
close to the appliance and dispose of
it.
Remove the door catch to prevent
children or pets from becoming
trapped in the drum.
Dispose of the appliance in
accordance with local requirements
for the disposal of Waste Electrical
and Electronic Equipment (WEEE).
3. INSTALLATION
WARNING!
Refer to Safety chapters.
3.1 Unpacking
WARNING!
Remove all the packaging
and the transit bolts before
installing the appliance.
WARNING!
Use the gloves.
1. Use a cutter to cut through external
film.
2. Remove the external film.
www.aeg.com6
3. Remove the cardboard top and the
polystyrene packaging materials.
4. Open the door and remove the
polystyrene piece from the door seal
and all the items from the drum.
5. Put the front polystyrene packaging
element on the floor behind the
appliance.
6. Carefully put down the appliance
with the rear side on it.
Make sure not to damage
the hoses.
7. Remove the polystyrene protection
from the bottom.
1
2
8. Fully clean and dry the bottom of the
appliance.
CAUTION!
Do not use alcohol, solvents
or chemical products.
9. Make sure to identify the different
sizes and the positions of the sound
barriers. Refer to the illustration:
A
B
A (FRONT) = Front of the
appliance
B (BACK) = Rear of the appliance
10. Remove the adhesive strip from the
sound barriers.
11. Attach the four barriers to bottom of
the appliance.
12. Refer to the illustration. Make sure
that the barriers are securely
attached.
ENGLISH
7
x4
A
B
Attach the sound barriers at
a room temperature.
13. Pull up the appliance in vertical
position.
14. Remove the power supply cable and
the drain hose from the hose holders.
It is possible to see water
flowing from the drain hose.
This is due to the testing
with the appliance of water
in factory.
15. Remove the three bolts by using the
key supplied with the appliance.
16. Pull out the plastic spacers.
17. Put the plastic caps, that you find in
the user manual bag, in the holes.
We recommend that you
keep the packaging and the
transit bolts for any
movement of the appliance.
3.2 Positioning and levelling
1. Install the appliance on a flat hard
floor.
Make sure that carpets do
not stop the air circulation
below the appliance.
Make sure that the
appliance does not touch
the wall or other units.
2. Loosen or tighten the feet to adjust
the level.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
www.aeg.com8
x4
The appliance must be level and stable.
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
When the machine is
installed on a plinth or if a
washer dryer is stacked on
the washing machine, use
the accessories described in
chapter 'Accessories'. Read
carefully the instructions
supplied with the appliance
and with the accessory.
3.3 The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
2. Position it toward left or right
depending on the position of the
water tap.
20º20º
45º45º
Make sure that the inlet hose
is not in vertical position.
3. If necessary, loose the ring nut to set
it in the correct position.
4. Connect the water inlet hose to the
cold water tap with 3/4" thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension
hose if the inlet hose is too
short. Contact the service
centre for the replacement
of the inlet hose.
3.4 Water drainage
The drain hose should be positioned at a
height of not less than 60 cm and not
more than 100 cm from the floor.
ENGLISH
9
You can extend the drain
hose to maximum 400 cm.
Contact the authorized
service centre for the other
drain hose and the
extension.
It is possible to connect the drain hose in
different ways:
1. Make a U shape with the drain hose
and put it around the plastic hose
guide.
2. On the edge of a sink - Fasten the
guide to the water tap or to the wall.
Make sure that the plastic
guide cannot move when
the appliance drains.
Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.
3. To a stand pipe with vent-hole -
Insert the drain hose directly into a
drain pipe. Refer to the illustration.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter
of the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in
the spigot and tighten it with a
clamp. Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
www.aeg.com10
6. Position the hose directly to a built-
in drain pipe in the room wall and
tighten it with a clamp.
4. ACCESSORIES
4.1 Available in
www.aeg.com/shop or from
authorised dealer
Only appropriate
accessories approved by
AEG ensure the safety
standards of the appliance. If
unapproved parts are used,
any claims will be
invalidated.
4.2 Stacking kit
The tumble dryer can be stacked on the
top of the washing machine only by
using the correct stacking kit
manufactured and approved by AEG.
Verify the compatible
stacking kit by checking the
depth of your appliances.
The stacking kit can be used only with
the appliances specified in the leaflet
provided with the accessory.
Read carefully the instructions supplied
with the appliance and with the
accessory.
WARNING!
Do not put the tumble dryer
under the washing machine.
5. PRODUCT DESCRIPTION
5.1 Special features
Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
energy and detergent consumption and
proper care of fabric.
The ProSense technology adjusts
automatically the programme
duration to the laundry in the drum to
achieve perfect washing results in the
minimum possible time.
Thanks to the Soft Plus option, the
fabric softener is uniformly spread out
in the laundry and deeply penetrates
the fabric fibres favouring a perfect
softness.
ENGLISH 11
5.2 Fixing plate kit
(4055171146)
Available from your authorised dealer.
If you install the appliance on a plinth,
secure the appliance in the fixing plates.
Read carefully the instructions supplied
with the accessory.
5.3 Appliance overview
1 2 3
9
5
6
7
4
10
8
11 12
1
Worktop
2
Detergent dispenser
3
Control panel
4
Door handle
5
Rating plate
6
Drain pump filter
7
Feet for levelling the appliance
8
Drain hose
9
Inlet hose connection
10
Mains cable
11
Transit bolts
12
Hose support
www.aeg.com12
6. CONTROL PANEL
6.1 Control panel description
2
3
6
12 11 10 8
1
4
5
7
9
1
Programme dial
2
Display
3
Eco touch button
4
Time Save touch button
5
Rinse
touch button
Extra Rinse option
Skipping wash phase Only Rinse
6
Start/Pause touch button
7
Stain/Prewash touch button
Stain option
Prewash option
8
Delay Start touch button
9
Soft Plus touch button
10
Spin
reduction touch button
11
Temp.
touch button
12
On/Off
push button
6.2 Display
MIX
Maximum load indicator. The indicator flashes during the laundry
load estimation.
ENGLISH 13
Door locked indicator.
Delay start indicator.
The digital indicator can show:
Programme duration (e. g. ).
Delay time (e. g. or ).
Cycle end ( ).
Warning code ( ).
Washing phase indicator. It flashes during prewash and wash phase.
Rinsing phase indicator. It flashes during rinse phase.
The Extra Rinse option. The indicator appears above the when a
extra rinse is set .
Spinning and draining phase indicator. It flashes during spin and drain
phase.
Child safety lock indicator.
Energy saving indicators. The indicator appears by selecting a
programme for cotton at 40 °C or 60 °C.
Temperature indicator. The indicator appears when a cold wash is
set.
Spin speed indicator.
No spin speed indicator. Spin phase is off.
Rinse hold indicator.
Extra silent indicator.
Time saving indicator.
7. DIAL AND BUTTONS
7.1 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
www.aeg.com14
7.2 Introduction
The options/functions are
not selectable with all
washing programmes. Check
the compatibility between
options/functions and
washing programmes in the
"Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
7.3 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
When the display shows the indicators
and , the appliance does not
heat the water.
7.4 Spin
When you set a programme, the
appliance automatically sets the
maximum spin speed allowed.
Touch repeatedly this button to:
Decrease the spin speed.
The display shows only
the spin speeds available
for the set programme.
Activate the Rinse Hold option.
The final spin is not performed. The
water of the last rinse is not drained
out to prevent the fabrics from
creasing. The washing programme
ends with water in the drum.
The display shows the indicator
.
The door stays locked and the drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
If you touch the Start/Pause button,
the appliance performs the spinning
phase and drains the water.
The appliance empties
the water out
automatically after 18
hours approximately.
Activate the Extra Silent option.
The intermediate and the final
spinning phases are suppressed and
the programme ends with water in the
drum. This helps to reduce creasing.
The display shows the indicator .
The door stays locked. The drum
turns regularly to reduce creasing.
You must drain the water to unlock
the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available.
In some programmes the rinses are
performed with more water.
If you touch the Start/Pause button,
the appliance performs the only
draining phase.
The appliance empties
the water out
automatically after 18
hours approximately.
7.5 Stain/Prewash
Press this button repeatedly to activate
one of the two options.
The relevant indicator goes on in the
display.
Stain
Select this option to add an anti-stain
phase to a programme in order to
treat heavily soiled or stained laundry
with stain remover.
Pour the stain remover into
compartment
. The stain remover
will be added in the appropriate
phase of the washing programme.
This option is not
available with a
temperature lower than
40 °C.
Prewash
ENGLISH
15
Use this option to add a pre-wash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
The options can increase the
programme duration.
7.6 Rinse
With this button you can select one of
the following options:
Extra Rinse option
This option adds a few rinses
according to the selected washing
programme.
Use this option for persons allergic to
detergent residues and in areas
where the water is soft.
This option increases
slightly the programme
duration.
Skipping wash phase - Only Rinse
option
The appliance performs only the
rinsing phase, the spinning and the
draining phases of the selected
programme.
The corresponding indicator above the
touch button illuminates.
7.7 Eco
The Eco option reduces the energy
consumption maintaining good washing
results.
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
Water and energy consumption may
depend on different causes, such as
water pressure, its hardness and
temperature, ambient temperature, type
and quantity of laundry, the set options,
spin speed and voltage fluctuations in
the electricity network. The display shows
the indicator .
7.8 Time Save
With this option you can decrease the
programme duration.
If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing programme. Touch this
button once to decrease the duration.
In case of smaller load, touch this
button twice to set an extra quick
programme.
The display shows the indicator .
7.9 Soft Plus
Set the Soft Plus option to ensures
perfect distribution of the fabric softener
and improves the fabric softness.
This option increases slightly
the programme duration.
7.10 Delay Start
With this option you can delay the start
of a programme in a more convenient
time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause button,
the display shows the indicator and
the selected delay time and the
appliance begins the countdown.
7.11 Start/Pause
Touch the Start/Pause button to start,
pause the appliance or interrupt a
running programme.
www.aeg.com
16
8. PROGRAMMES
8.1 Programme Chart
Washing programmes
Programme Programme description
Washing programmes
Cottons
White cotton and coloured cotton. Normal, heavy and light
soil.
Standard programmes for the Energy Label consumption
values. According to regulation 1061/2010, the programme
Cottons at 60 °C and the programme Cottons at 40 °C with the
option are respectively the «Standard 60°C cotton pro-
gramme» and the «Standard 40°C cotton programme». They
are the most efficient programmes in terms of combined ener-
gy and water consumption for washing normally soiled cotton
laundry.
The water temperature of the washing phase
may differ from the temperature declared for
the selected programme.
Synthetics
Synthetic items or mixed fabric items. Normal soil.
Delicates
Delicate fabrics such as acrylics, viscose and mixed fabrics
requiring gentler washing. Normal soil.
Wool/Silk
Machine washable wool, hand washable wool and other
fabrics with «hand washing» care symbol
1)
.
Anti-Allergy
White cotton items. This programme removes micro-organ-
isms thanks to a washing phase with the temperature main-
tained above 60°C for several minutes. This helps remove
germs, bacteria, micro-organism and particles. An additional
rinsing phase ensures a proper removal of detergent residues
and pollens/allergenic items. In this way the wash is more ef-
fective.
20 min. - 3 kg
Cotton and synthetic items lightly soiled or once worn.
ENGLISH 17
Programme Programme description
Outdoor
Do not use fabric softener and make sure that
there is no softener residue in the detergent
dispenser.
Outdoor clothing, technical, sport fabrics, waterproof and
breathable jackets, shell jackets with a removable fleece or
inner insulation. The recommended laundry load is 2 kg.
This programme can also be used as water-repellent restoring
cycle, specifically tailored for treating clothes with a hydropho-
bic coating. To perform the water-repellent restoring cycle,
proceed as follows:
Pour the washing detergent in the compartment .
Pour a special water-repellent restorer for fabric in the
drawer compartment for fabric softener
.
Reduce the laundry load to 1 kg.
To further improve the water-repellent restor-
ing action, dry the laundry in a tumble dryer by
setting the Outdoor drying programme (if
available and if the garment care label permits
tumble drying).
Duvet
Single synthetic blanket, padded clothes, duvets, down
jackets and similar items.
Sport
Synthetic and delicate items
Spin/Drain
To spin the laundry and to drain the water in the drum. All fab-
rics, except woollens and delicate fabrics.
1)
During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
Programme temperature, maximum spin speed and maximum load
Programme Default tempera-
ture
Temperature
range
Reference spin
speed
Spin speed range
Maximum load
Washing programmes
Cottons
40 °C
95 °C - Cold
1400 rpm
1400 rpm - 400 rpm
9 kg
Synthetics
40 °C
60 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Delicates
30 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
www.aeg.com18
Programme Default tempera-
ture
Temperature
range
Reference spin
speed
Spin speed range
Maximum load
Wool/Silk
40 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
1,5 kg
Anti-Allergy
60 °C
1400 rpm
1400 rpm - 400 rpm
9 kg
20 min. - 3 kg
30 °C
40 °C - 30 °C
1200 rpm
1200 rpm - 400 rpm
3 kg
Outdoor
30 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
2 kg
1)
1 kg
2)
Duvet
40 °C
60 °C - Cold
800 rpm
800 rpm - 400 rpm
3 kg
Sport
30 °C
40 °C - Cold
1200 rpm
1200 rpm - 400 rpm
4 kg
Spin/Drain
3)
1400 rpm
1400 rpm
9 kg
1)
Washing programme.
2)
Washing programme and waterproofing phase.
3)
Set the spin speed. Make sure it is suitable for the type of fabric being washed. If you set the No Spin
option then only the drain phase is available.
Programme options compatibility
Programme
Cottons
Synthetics
Delicates
Wool/Silk
Anti-Allergy
20 min. - 3 kg
Outdoor
Duvet
Sport
Spin/Drain
Options
Spin
ENGLISH 19
Programme
Cottons
Synthetics
Delicates
Wool/Silk
Anti-Allergy
20 min. - 3 kg
Outdoor
Duvet
Sport
Spin/Drain
Stain
1)
Prewash
Extra Rinse
Only Rinse
2)
Time Save
3)
Delay Start
Soft Plus
1)
This option is not available with temperature lower than 40 °C.
2)
This option is not available with a temperature lower than 30 °C.
3)
If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully
load the appliance, however the washing results can be less satisfactory.
8.2 Woolmark Apparel Care - Blue
The wool wash cycle of this machine has been
approved by The Woolmark Company for the
washing of wool garments labelled as «hand
wash» provided that the garments are wash-
ed according to the instructions issued by the
manufacturer of this washing machine. Follow
the garment care label for drying and other
laundry instructions. M1512
The Woolmark symbol is a Certification mark
in many countries.
9. SETTINGS
9.1 Child Lock
With this option you can prevent children
from playing with the control panel.
To activate/deactivate this option,
touch the Spin and the Stain/Prewash
buttons simultaneously until the
indicator comes on/goes off on
the display.
You can activate this option:
After you touch the Start/Pause
button: all the buttons and the
programme dial are deactivated
(except On/Off button ).
www.aeg.com20
1 / 1

AEG LF6G9454RM Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

dans d''autres langues