Jenn-Air JGS1450FB Mode d'emploi

Marque: Jenn-Air

Modèle: JGS1450FB

Catégorie: Cuisinières

Taper: Mode d'emploi

User Guide

Gas Range

THANK YOU for purchasing this high-quality product. Register your range at www.jennair.com. In Canada, register your range

at www.jennair.ca.

For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the

oven frame behind the top right side of the oven door.

Model Number______________________________________________ Serial Number_______________________________________________

Para una versión de estas instrucciones en español, visite www.jennair.com.

Deberá tener a mano el número de modelo y de serie, que están ubicados en el marco del horno, detrás del lado derecho superior de la

puerta del horno.

Table of Contents

W10896667A

RANGE SAFETY .............................................................................2

The Anti-Tip Bracket ....................................................................3

KEY USAGE TIPS ...........................................................................4

AquaLift

Self-Cleaning Technology ............................................4

Surface Temperatures ..................................................................4

Preheating ....................................................................................4

Surface Burners ...........................................................................4

FEATURE GUIDE ............................................................................5

Electronic Oven Controls .............................................................7

COOKTOP .......................................................................................9

Surface Burners ...........................................................................9

Surface Grates ...........................................................................10

Burner Size .................................................................................11

Griddle ........................................................................................11

Cookware ...................................................................................12

Home Canning ...........................................................................12

OVEN .............................................................................................13

Aluminum Foil .............................................................................13

Positioning Racks and Bakeware ..............................................13

Roll-Out Rack .............................................................................14

Oven Vent ...................................................................................15

Sabbath Mode............................................................................15

Baking and Roasting ..................................................................15

Broiling........................................................................................15

Convection Cooking ..................................................................16

Prooﬁng Bread ...........................................................................16

Favorite .......................................................................................16

Cook Time ..................................................................................17

Baking Drawer ............................................................................17

Oven Light ..................................................................................17

RANGE CARE ...............................................................................18

Clean Cycle ................................................................................18

General Cleaning ........................................................................19

Remove/Replace Drawer ...........................................................20

TROUBLESHOOTING ..................................................................21

ACCESSORIES .............................................................................24

WARRANTY ..................................................................................25

Range Safety

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING: If the information in this manual is not followed exactly, a fire or explosion

may result causing property damage, personal injury or death.

– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this

or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch.

•

Do not use any phone in your building.

•

Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•

If you cannot reach your gas supplier, call the fire department.

– Installation and service must be performed by a qualified installer, service agency or

the gas supplier.

WARNING: Gas leaks cannot always be detected by smell.

Gas suppliers recommend that you use a gas detector approved by UL or CSA.

For more information, contact your gas supplier.

If a gas leak is detected, follow the “What to do if you smell gas” instructions.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

The Anti-Tip Bracket

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the

anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Verify the anti-tip bracket has been properly installed and engaged per installation instructions.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed and engaged.

Failure to follow these instructions can result in death or serious burns to children and adults.

To verify the anti-tip bracket is installed and engaged:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor or wall.

• Slide range back so rear range foot is under anti-tip bracket.

• See installation instructions for details.

WARNING

Anti-Tip

Bracket

Range Foot

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

■

WARNING: TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR OR WALL, AND

SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER

ANTI-TIP BRACKET.

■

WARNING:

NEVER use this appliance as a space

heater to heat or warm the room. Doing so may result in

carbon monoxide poisoning and overheating of the oven.

■

WARNING:

NEVER cover any slots, holes or passages

in the oven bottom or cover an entire rack with materials

such as aluminum foil. Doing so blocks air flow through the

oven and may cause carbon monoxide poisoning.

Aluminum foil linings may also trap heat, causing a fire

hazard.

■ CAUTION: Do not store items of interest to children in

cabinets above a range or on the backguard of a range –

children climbing on the range to reach items could be

seriously injured.

■

Proper Installation – The range, when installed, must be

electrically grounded in accordance with local codes or, in

the absence of local codes, with the

National Electrical

Code, ANSI/NFPA 70

. In Canada, the range must be

electrically grounded in accordance with Canadian

Electrical Code. Be sure the range is properly installed and

grounded by a qualified technician.

■

This range is equipped with a three-prong grounding plug

for your protection against shock hazard and should be

plugged directly into a properly grounded receptacle. Do

not cut or remove the grounding prong from this plug.

■ Disconnect power before servicing.

■

Injuries may result from the misuse of appliance doors or

drawers such as stepping, leaning, or sitting on the doors

or drawers.

■

Maintenance – Keep range area clear and free from

combustible materials, gasoline, and other flammable

vapors and liquids.

■ Storage in or on the Range – Flammable materials should

not be stored in an oven or near surface units.

■ Top burner flame size should be adjusted so it does not

extend beyond the edge of the cooking utensil.

For self-cleaning ranges –

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils. Wipe off all excessive spillage before

initiating the cleaning cycle.

Key Usage Tips

AquaLift

Self-Cleaning Technology

AquaLift

Self-Cleaning Technology is a ﬁrst-of-its-kind cleaning

solution designed to minimize the time, temperature and odors

that ordinarily come with traditional self-cleaning methods. With

AquaLift

Self-Cleaning Technology, an innovative coating on the

interior of the oven is activated with heat and water to release

baked-on soil. To use AquaLift

Self-Cleaning Technology, simply

wipe out loose debris, pour water into the oven bottom and run

the AquaLift

Self-Cleaning cycle. When the cycle ﬁnishes in under

1 hour at a lower temperature than in traditional self-cleaning

methods, just wipe out the remaining water and loose debris.

See the “Clean Cycle” section for more detailed instructions. For

additional information, frequently asked questions and videos

on using AquaLift

Self-Cleaning Technology, visit our website at

http://whirlpoolcorp.com/aqualift.

Surface Temperatures

When the range is in use, all range surfaces may become hot,

such as the knobs and oven door.

Baking Drawer

When the oven is in use, the drawer may become hot. Do not store

plastics, cloth, or other items that could melt or burn in the drawer.

Oven Vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Do not set plastics, paper or

other items that could melt or burn near the oven vent.

Preheating

When beginning a Bake or Convect Bake cycle, the oven will begin

preheating after Start is pressed. The oven will take approximately

12 to 15 minutes to reach 350°F (177°C) with all of the oven

racks provided with your oven inside the oven cavity. Higher

temperatures will take longer to preheat. The preheat cycle rapidly

increases the oven temperature. The actual oven temperature

will go above your set temperature to offset the heat lost when

your oven door is opened to insert food. This ensures that when

you place your food in the oven, the oven will begin at the proper

temperature. Insert your food when the preheat tone sounds. Do

not open the door during preheat before the tone sounds.

Surface Burners

The burner bases and caps must be properly positioned before

cooking. Your range comes with 3 sizes of burners and caps. Each

round burner base is marked with a letter indicating the burner

size. Align the burner bases as shown in the following illustration:

A. Small (S)

B. X-Large (XL)

C. Oval

D. Medium (M)

E. Large (L)

Align the gas tube opening in the burner base with the oriﬁce

holder on the cooktop and the igniter electrode with the notch

in the burner base.

A. Burner cap

B. Gas tube opening

C. Burner base

D. Igniter electrode

E. Oriﬁce holder

Each round burner cap is marked with a letter indicating

the burner size. Place the burner caps on the appropriate

burner bases.

Small cap (S)

Medium cap (M) Large cap (L) X-Large cap (XL)

Burner caps should be level when properly positioned. If burner

caps are not properly positioned, surface burners will not light. The

burner cap should not rock or wobble when properly aligned.

A. Incorrect

B. Correct

Feature Guide

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked

Questions (FAQs) section of our website at www.jennair.com for more detailed instructions. In Canada, refer to the Customer Service

Section at www.jennair.ca.

KEYPAD FEATURE INSTRUCTIONS

OPTIONS/CLOCK Clock

The Clock can use a 12- or 24-hour cycle. See the “Electronic Oven Controls” section.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Use the number keypads to set the time of day.

3. Press START to change the time.

4. Press “3” for AM or “6” for PM.

OPTIONS/CLOCK Settings

Enables you to personalize the audible tones and oven operation to suit your needs. See the

“Electronic Oven Controls” section.

LIGHT Oven cavity

light

The oven light is controlled by a keypad on the oven control panel. While the oven door is

closed, press LIGHT to turn the light on and off. When the oven door is opened, the oven

light will automatically come on.

TIMER SET/OFF Oven timer

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER SET/OFF.

2. Press the number keypads to set the length of time in hr-min-min. Leading zeros do not

have to be entered. For example, for 2 minutes, enter “2.”

3. Press TIMER SET/OFF to begin the countdown. If enabled, end-of-cycle tones will

sound at end of countdown.

4. Press TIMER SET/OFF again to cancel the Timer and return to the time of day. Do not

press CANCEL because the oven will turn off.

5. If the Timer is running but not in the display, press TIMER SET/OFF to display the

countdown for 5 seconds.

START Cooking start

The Start keypad begins any oven function. If Start is not pressed within 2 minutes after

pressing a keypad, the function is canceled and the time of day is displayed.

CANCEL UPPER

CANCEL LOWER

Range function

The Cancel keypads stop any function for the appropriate oven, except the Clock and Timer.

BAKE

(upper and lower

oven)

Baking and

roasting

1. Press BAKE for the desired oven.

2. Set the desired temperature between 170°F and 500°F (75°C and 260°C) for the

upper oven or 170°F and 451°F (75°C and 233°C) for the lower oven using the number

keypads. The default temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL for the desired oven when ﬁnished.

BROIL Broiling

1. Press BROIL.

2. Press the number keypads to set the desired temperature.

3. Press START and allow the oven to preheat for 5 minutes.

4. To change the temperature, repeat steps 2 and 3.

5. Position the cookware in the oven, and then close the door.

6. Press CANCEL UPPER when ﬁnished.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

KEYPAD FEATURE INSTRUCTIONS

MANUAL CONVECT

MODES

Convection

cooking

1. Press MANUAL CONVECT MODES until the desired convection mode appears in the

display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Insert food when prompted.

6. To change the temperature, repeat steps 3 and 4.

7. Press CANCEL UPPER when ﬁnished.

AUTO CONVECT

MODES

Convection

cooking

1. Press AUTO CONVECT MODES until the desired convection mode appears in the

display.

2. Press START.

3. Press the number keypads to set the desired temperature.

4. Press START.

5. Press the number keypads to set the desired cook time.

6. Press START.

7. Insert food when prompted.

8. To change the temperature, repeat steps 3 through 6.

9. Press CANCEL UPPER when ﬁnished.

KEEP WARM

(upper and lower

oven)

Hold warm

Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM for the desired oven.

2. Set the desired temperature between 145°F and 190°F (63°C and 88°C) using the

number keypads. The default temperature is 170°F (75°C).

3. Press START.

4. Press CANCEL for the desired oven when ﬁnished.

NOTE: On double ovens, if both ovens are operating, each oven temperature can be

changed independently of the other. Press the “1” keypad to select the upper oven, or press

the “2” keypad to select the lower oven.

PROOF Prooﬁng bread

1. Place prepared dough in oven. Press PROOF.

2. Press START.

3. Let the dough rise until nearly doubled in size. Prooﬁng time may vary depending on

dough type and quantity.

4. Press CANCEL UPPER when ﬁnished prooﬁng.

Refer to the “Prooﬁng Bread” section for more information.

FAVORITE Saved favorite

The Favorite keypad stores the oven mode, cook time, and temperature for your favorite

recipe. To save or use favorite, see the “Favorite” section.

DELAY START Delayed start

The Delay Start keypad is used to enter the starting time for an oven function with a delayed

start. Delay Start should not be used for foods such as breads and cakes because they may

not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK TIME Timed cooking

Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set

length of time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

AQUALIFT SELF

CLEAN

Clean cycle

See the “Clean Cycle” section.

START

(hold 3 sec to lock)

Oven control

lockout

1. Check that the oven is OFF.

2. Press and hold START (hold 3 sec to lock) for 3 seconds.

3. A tone will sound, and “Control Locked” will scroll, and then “Locked” will be displayed.

4. Repeat to unlock. No keypads will function with the controls locked. The cooktop

functions are not affected by the oven control lockout.

OPTIONS/CLOCK Energy save

1. Press OPTIONS/CLOCK until “ENERGY SAVE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

If Energy Save is ON, the range will go into Sleep mode after 5 minutes of inactivity. Any

keypad press will activate the display. If Energy Save is OFF, the display will be on at all

times.

Electronic Oven Controls

Control Display

The display will ﬂash when powered up or after a power loss.

Press CANCEL UPPER to clear. When the oven is not in use,

the time of day is displayed. If the range is in Energy Save

mode, the display will be blank when not in use.

Tones

Tones are audible signals, indicating the following:

One Tone

■ Valid keypad press

■ Oven is preheated (long tone)

■ Function has been entered

■ Reminder, repeating each minute after the end-of-cycle tones

Three Tones

■ Invalid keypad press

Four Tones

■ End-of-cycle

Use the Options/Clock keypad to change the tone settings.

Energy Save

The Energy Save mode puts the range into sleep mode and

reduces energy consumption.

To Activate the Energy Save Mode:

1. Press OPTIONS/CLOCK until “ENERGY SAVE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

5. The setting will be activated after 5 minutes.

To Deactivate the Energy Save Mode:

1. Press OPTIONS/CLOCK until “ENERGY SAVE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press CANCEL to exit and display the time of day.

5. The clock will reappear in the display, and the range can be

operated as usual.

Settings

Many features of the oven control can be adjusted to meet your

personal needs. These changes are made using the Options/Clock

keypad.

Use the Options/Clock keypad to scroll through the features that

can be changed. Each press of the Options/Clock keypad will

advance the display to the next setting. After selecting the feature

to be changed, the control will prompt you for the required input.

Then press START or CANCEL UPPER to exit and display the time

of day. Details of all of the feature changes are explained in the

following sections.

Press CANCEL UPPER to exit Settings.

Clock

The Clock can use a 12- or 24-hour cycle.

1. Press OPTIONS/CLOCK until “CLOCK” is displayed.

2. Press START to change the time.

3. Press “3” for AM or “6” for PM.

4. Use the number keypads to set the time of day.

5. Press START or CANCEL UPPER to exit and display the time

of day.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit, but can be changed to

Celsius.

1. Press OPTIONS/CLOCK until “TEMP UNIT” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Audible Tones Disable

Turns off all tones, including the end-of-cycle tone and keypress

tones. Reminder tones are still active when all tones are disabled.

1. Press OPTIONS/CLOCK until “SOUND” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sound Volume

Sets the volume of the tone to either high or low.

1. Press OPTIONS/CLOCK until “SOUND VOLUME” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

End-of-Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press OPTIONS/CLOCK until “END TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Keypress Tones

Activates or turns off the tones when a keypad is pressed.

1. Press OPTIONS/CLOCK until “KEYPRESS TONE” is

displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute after

the end of cycle tones.

1. Press OPTIONS/CLOCK until “REMINDER TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12/24 Hour Clock

1. Press OPTIONS/CLOCK until “12/24 HOUR” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales ﬂoor

with 120 V power connection and permits the control features

to be demonstrated without the oven turning on. If this feature is

activated, the oven will not work.

1. Press OPTIONS/CLOCK until “DEMO MODE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Sabbath Mode

The Sabbath mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off, and the heating elements will not turn on or off

immediately.

NOTE: A bake function for either or, both ovens must be started

before Sabbath Mode can be activated.

To Enable Sabbath Mode Capability (One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven 12 hours

after the oven initiates a cook or clean function. This will not

interfere with any timed or delay cook functions.

1. Press OPTIONS/CLOCK until “12Hr AUTO_OFF” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Languages - Scrolling Display Text

Language options are English, Spanish and French.

1. Press OPTIONS/CLOCK until “LANGUAGE” is displayed.

2. The current setting will be displayed.

3. Press the “1” or “2” keypad to select the desired language.

4. Press START or CANCEL UPPER to exit and display the time

of day.

Oven Temperature Offset Control

IMPORTANT: Do not use a thermometer to measure oven

temperature. Elements will cycle on and off as needed to provide

consistent temperature but may run slightly hot or cool at any

point in time due to this cycling. Most thermometers are slow

to react to temperature change and will not provide an accurate

reading due to this cycling.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press OPTIONS/CLOCK until “TEMP CALIB” is displayed.

2. On some models, press “1” to adjust the drawer temperature

calibration. Press START, wait 10 seconds for the display to

change, and then continue with Step 3.

Press START to adjust the oven temperature calibration. Wait

10 seconds for the display to change, and then continue with

Step 3.

3. Press the “3” keypad to increase the temperature in 5°F

(3°C) increments, or press the “6” keypad to decrease the

temperature in 5°F (3°C) increments. The offset range is from

-30°F to +30°F (-18°C to +18°C).

4. Press START or CANCEL UPPER to exit and display the time

of day.

Cooktop

Electric igniters automatically light the surface burners when

control knobs are turned to IGNITE.

Before setting a control knob, place ﬁlled cookware on the

grate. Do not operate a burner using empty cookware or without

cookware on the grate.

To Set:

1. Push in and turn knob counterclockwise to IGNITE.

All surface burners will click. Only the burner with the control

knob turned to IGNITE will produce a ﬂame.

2. Turn knob to anywhere between HIGH and LOW.

Power Failure

In case of prolonged power failure, the surface burners can be

lit manually. Hold a lit match near a burner, and then turn knob

counterclockwise to IGNITE. After burner lights, turn knob to

setting.

Surface Burners

IMPORTANT: Do not obstruct the ﬂow of combustion and

ventilation air around the burner grate edges.

Burner Cap: Always keep the burner cap in place when using a

surface burner. A clean burner cap will help avoid poor ignition and

uneven ﬂames. Always clean the burner cap after a spillover, and

routinely remove and clean the caps according to the “General

Cleaning” section.

NOTE: Each round burner base is marked with a letter indicating

the burner size.

Alignment: Be sure to align the gas tube opening in the burner

base with the oriﬁce holder on the cooktop and the igniter

electrode with the notch in the burner base.

NOTE: Each round burner base is marked with a letter indicating

the burner size.

A. Burner cap

B. Gas tube opening

C. Burner base

D. Igniter electrode

E. Oriﬁce holder

Gas Tube Opening: Gas must ﬂow freely throughout the gas tube

opening for the burner to light properly. Keep this area free of soil,

and do not allow spills, food, cleaning agents or any other material

to enter the gas tube opening. Keep spillovers out of the gas tube

opening by always using a burner cap.

Burner Ports: Check burner ﬂames occasionally for proper size

and shape as shown in the previous illustration. A good ﬂame is

blue in color, not yellow. Keep this area free of soil, and do not

allow spills, food, cleaning agents or any other material to enter

the burner ports.

To Clean:

IMPORTANT: Before cleaning, make sure all controls are off and

the cooktop is cool. Do not use oven cleaners, bleach or rust

removers. Do not wash in the dishwasher.

1. Remove the burner cap and the burner base, and then clean

according to “General Cleaning” section.

2. Clean the gas tube opening with a damp cloth.

3. Clean clogged burner ports with a straight pin as shown. Do

not enlarge or distort the port. Do not use a wooden toothpick.

If the burner needs to be adjusted, contact a trained repair

specialist.

A. 1 to 1¹⁄

" (2.5 to 3.8 cm)

B. Burner ports

WARNING

Fire Hazard

Do not let the burner flame extend beyond the edge of

the pan.

Turn off all controls when not cooking.

Failure to follow these instructions can result in death

or fire.

REMEMBER: When range is in use, the entire cooktop area

may become hot.

4. Replace the burner base. Each round burner base is marked

with a letter indicating the burner size. See the following

illustration for burner positions:

5. Replace the burner cap, making sure it is properly aligned with

the burner base. The burner cap should not rock or wobble

when properly aligned.

A. Incorrect

B. Correct

IMPORTANT: The bottom of the small and medium caps are

different. Do not put the wrong size burner cap on the burner

base.

NOTE: Each round burner base is marked with a letter indicating

the burner size.

Small cap (S)

Medium cap (M) Large cap (L) X-Large cap (XL)

6. Turn on the burner. If the burner does not light, check cap

alignment. If the burner still does not light, turn off the burner.

Do not service the burner yourself. Contact a trained repair

specialist.

The surface grates interlock using the hooks on the middle grate

and the indents on the end grates. To remove the grates, remove

the end grates ﬁrst, and then remove the middle grate. To replace

the grates, replace the middle grate ﬁrst, and then place the end

grates on either side.

A. Indent

B. Hook Burner

Although the burner grates are durable, they will gradually lose

their shine and/or discolor due to the high temperatures of the

gas ﬂame.

A. Small (S)

B. X-Large (XL)

C. Oval

D. Medium (M)

E. Large (L)

Surface Grates

The grates must be properly positioned before cooking. In the

proper position, the grates should be ﬂush and level. Improper

installation of the grates may result in chipping or scratching of

the cooktop.

To ensure proper positioning, align bumpers on grate bottom with

the indentations in the cooktop.

A. Bumpers

B. Alignment indentations

Griddle

Griddle installed on right side of cooktop

To Use the Griddle:

1. Locate the griddle on the right side grate, as shown. The

locating feet on the bottom of the griddle will engage the grate

tines to keep the griddle from sliding.

2. Before each use, brush on a thin layer of cooking oil to keep

food from sticking. Cooking sprays may leave a sticky residue

on the griddle that is hard to remove.

3. Preheat the griddle for 5 minutes. Preheating the griddle slowly

will ensure even heat distribution and will avoid warping the

griddle.

4. For preheating and cooking, set the front burner to the lowest

heat setting and the rear burner to medium-high heat for best

performance.

NOTE: The griddle may also be used on the left side grate. For

best results, the rear burner setting should be set to Medium-

Low or Medium, and the front burner setting should be set to

Low.

To Clean the Griddle:

1. Let the griddle cool, and then empty the drip tray.

2. See the “General Cleaning” section for cleaning instructions.

3. Store griddle in a cool dry place.

Burner Size

Select a burner that best ﬁts your cookware. See the following

illustration and chart.

Burner Size Recommended Use

Small

■ Low-heat cooking

■ Melting chocolate or butter

Medium

■ Multipurpose burner

Large

■ For large cookware

X-Large

(most powerful)

■ For large cookware

■ Most powerful burner

Oval

■ For longer dishes

X-Large

(most

powerful)

Oval

Cookware Characteristics

Aluminum

■ Heats quickly and evenly.

■ Suitable for all types of cooking.

■ Medium or heavy thickness is best for

most cooking tasks.

Cast iron

■ Heats slowly and evenly.

■ Good for browning and frying.

■ Maintains heat for slow cooking.

Ceramic or

Ceramic glass

■ Follow manufacturer’s instructions.

■ Heats slowly, but unevenly.

■ Ideal results on low to medium heat

settings.

Copper

■ Heats very quickly and evenly.

■ May leave copper residues, which may

be diminished if cleaned immediately

after cooking.

Earthenware/

Stoneware

■ Follow manufacturer’s instructions.

■ Use on low heat settings.

Porcelain

enamel-on-steel

or cast iron

■ See stainless steel or cast iron.

Stainless steel

■ Heats quickly, but unevenly.

■ A core or base of aluminum or copper

on stainless steel provides even heating.

For best results, the cookware should be centered above the

burner with the bottom sitting level on the grate. The ﬂame should

be adjusted so that it does not extend up the sides of the pan.

Home Canning

When canning for long periods, alternate the use of surface

burners between batches. This allows time for the most recently

used areas to cool.

■ Center the canner on the grate above the burner.

■ Do not place canner on 2 surface burners at the same time.

■ For more information, contact your local agricultural extension

ofﬁce, or refer to published home canning guides. Companies

that manufacture home canning products can also offer

assistance.

Cookware

IMPORTANT: Do not leave empty cookware on a hot surface

cooking area, element or surface burner.

Ideal cookware should have a ﬂat bottom, straight sides and a

well-ﬁtting lid, and the material should be of medium-to-heavy

thickness.

Rough ﬁnishes may scratch the cooktop or grates. Aluminum and

copper may be used as a core or base in cookware.

Cookware material is a factor in how quickly and evenly heat is

transferred, which affects cooking results.

Cookware with nonstick surfaces should not be used under the

broiler.

Check for ﬂatness by placing the straight edge of a ruler across

the bottom of the cookware. While you rotate the ruler, no space

or light should be visible between it and the cookware.

Use the following chart as a guide for cookware material

characteristics.

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

Oven

Odors and smoke are normal when the oven is used the ﬁrst few

times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off by the oven. Exposure to the fumes may result

in death to certain birds. Always move birds to another closed and

well-ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

ﬁnish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

ﬁnish, do not place food or bakeware directly on the oven door or

bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

To position a rack, pull it out to the stop position, raise the front

edge, and then lift out. Use the following illustration and charts as

a guide.

The oven has 7 positions for a ﬂat rack, as shown in the previous

illustration and the following table.

Flat Rack Position* Type of Food

7 Broiling/searing meats, hamburgers,

steaks

6 Broiled meats, poultry, ﬁsh

3 or 4 Most baked goods, casseroles,

frozen foods

2 Roasted meats

1 Large roasts or poultry

For hamburger patties to have a well-seared exterior and a rare

interior, use a ﬂat rack in rack position 7. Side 1 should cook

for approximately 2½ to 3½ minutes. Side 2 should cook for

approximately 4 to 5 minutes. Expect a moderate degree of smoke

when broiling.

* If your model has a Max Capacity Oven Rack, the recessed

ends must be placed in the rack position above the desired

position of the food. See the following illustration.

A. Ends of rack in position 3

B. Food in position 2

IMPORTANT: These rack positions are for ﬂat racks. If a Max

Capacity Oven Rack is used, the rack position must be adjusted

as shown in the previous ﬁgure.

Multiple Rack Cooking

2-rack (non-convection): Use rack positions 2 and 5 or 3 and 6.

2-rack (convection): Use rack positions 2 and 5 or 3 and 6.

3-rack (convection): Use rack positions 2 and 7 and a Max

Capacity Oven Rack in rack position 5.

Baking Cookies and Layer Cakes on 2 Racks

Baking Layer Cakes

For best results when baking cakes on 2 racks, use the

Convection Bake function, a ﬂat rack in rack position 2 and a Max

Capacity Oven rack in rack position 6, or a ﬂat rack in position 5.

Place the cakes on the racks as shown. Keep at least 3" (7.6 cm)

of space between the front of the racks and the front cakes.

Baking Cookies

For best results when baking cookies on 2 racks, use the

Convection Bake function, a ﬂat rack in rack position 2 and a Max

Capacity Oven rack in rack position 6, or a ﬂat rack in position 5.

Roll-Out Rack

The roll-out rack allows easy access to position and remove food

in the oven. It is not recommended to use the roll-out rack in the

top rack, position 7, or the bottom rack, position 1.

Open Position

A. Rack frame

B. Sliding rack

Closed and Engaged Position

A. Rack frame

B. Sliding rack

To Insert Roll-Out Rack:

1. Angle the front of the rack assembly up, and then insert the

rack frame into the “V” cutout in the rack guides of the oven

cavity.

A. “V” cutout

B. Rack guides

2. Keep rack assembly lifted up at an angle, and then push in to

bypass the lower “V” cutout.

3. Lower the front of the rack assembly, and then gently slide

rack assembly into oven, bypassing the “V” cutouts. Push the

rack assembly into the oven until it stops at the ladder in the

back of the oven.

A. “V” cutout

B. Rack guides

C. Ladder hook

D. Ladder

4. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly, and then push the

rack assembly to the back of the oven. Lower the front of the

rack assembly so the ladder hook engages with the ladder on

both sides of the oven.

A. Sliding rack

B. Front crossbar

To Remove Roll-Out Rack:

1. Push the sliding rack in completely so that it is in the closed

and engaged position.

2. Reach through the rack to hold the sliding rack and the front

crossbar. Lift the front of the rack assembly to disengage the

ladder hook from the ladders at the rear of the oven, and then

pull the rack assembly forward.

3. Using 2 hands, gently pull the sliding rack and the rack frame

at the same time to the “V” cutout. Angle the rack so that the

front is higher than the back, and then gently pull rack past “V”

cutout and then out of the oven.

To avoid damage to the sliding rack, do not place more than 25 lbs

(11.4 kg) on the rack.

Do not clean the roll-out rack in a dishwasher. It may remove the

rack’s lubricant and affect its ability to slide.

See the “General Cleaning” section for more information.

Oven Vent

A. Oven vent

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Blocking or covering the oven

vent will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper or other items that could melt or

burn near the oven vent.

Sabbath Mode

The Sabbath mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will not

turn on or off, and the heating elements will not turn on or off

immediately.

To Enable Sabbath Mode Capability

(One Time Only):

1. Press OPTIONS/CLOCK until “SABBATH” is displayed. “OFF.

Press (1) for On” will scroll in the display.

NOTE: A bake function for either, or both ovens must be

started before Sabbath Mode can be activated.

2. Press the “1” keypad. “ON. Press (1) for Off” will scroll in the

display. Sabbath mode can be activated for baking.

3. Press START or CANCEL UPPER to exit and display the time

of day.

NOTE: To disable the Sabbath mode, repeat steps 1 through 3

to change the status from “SABBATH ON” to “SABBATH OFF.”

To Activate Sabbath Mode:

1. Press BAKE for the desired oven.

2. Press the number keypad to set a temperature other than

350°F (177°C).

3. Press START.

For timed cooking in Sabbath mode, press COOK TIME, and

then the number keypads to set the desired cook time.

4. Press OPTIONS/CLOCK. Three tones will sound. Then press

“7.” “SAb” will appear in the display.

To Adjust Temperature (When Sabbath Mode is Running):

1. Press the number keypad as instructed by the scrolling text to

select the new temperature.

NOTE: The temperature adjustment will not appear on the

display. The scrolling text will be shown on the display as it

was before the keypad was pressed.

2. Press START.

To Deactivate Sabbath Mode:

Press OPTIONS/CLOCK, and then press “7” to return to regular

baking, or press CANCEL for the desired oven to turn off the

range.

NOTE: No tones will sound while deactivating Sabbath mode.

Baking and Roasting

Preheating

When beginning a Bake or Convect Bake cycle, the oven will begin

preheating after Start is pressed. The oven will take approximately

12 to 15 minutes to reach 350°F (177°C) with all of the oven

racks provided with your oven inside the oven cavity. Higher

temperatures will take longer to preheat. The preheat cycle rapidly

increases the oven temperature. The actual oven temperature

will go above your set temperature to offset the heat lost when

your oven door is opened to insert food. This ensures that when

you place your food in the oven, the oven will begin at the proper

temperature. Insert your food when the preheat tone sounds. Do

not open the door during preheat before the tone sounds.

Oven Temperature

While in use, the oven elements will cycle on and off as needed

to maintain a consistent temperature, but they may run slightly

hot or cool at any point in time due to this cycling. Opening the

oven door while in use will release the hot air and cool the oven

which could impact the cooking time and performance. It is

recommended to use the oven light to monitor cooking progress.

NOTE: On models with convection, the convection fan may run in

the non-convection bake mode to improve oven performance.

Temperature Management System

The Temperature Management System electronically regulates the

oven heat levels during preheat and bake to maintain a precise

temperature range for optimal cooking results. The bake and broil

elements or burners cycle on and off in intervals. On convection

range models, the fan will run while preheating and may be cycled

on and off for short intervals during bake to provide the best

results. This feature is automatically activated when the oven is in

use.

Before baking and roasting, position racks according to

“Positioning Racks and Bakeware” section. When roasting, it is

not necessary to wait for the oven preheat before putting food in

unless it is recommended in the recipe.

Broiling

When broiling, preheat the oven for 5 minutes before putting food

in unless recommended otherwise in the recipe. Position food on

grid in a broiler pan, and then place it in the center of the oven

rack.

IMPORTANT: Close the door to ensure proper broiling

temperature.

Changing the temperature when broiling allows more precise

control when cooking. The lower the broil setting, the slower the

cooking. Thicker cuts and unevenly shaped pieces of meat, ﬁsh

and poultry may cook better at lower broil settings. Use racks 6

or 7 for broiling. Refer to the “Positioning Racks and Bakeware”

section for more information.

On lower settings, the broil element will cycle on and off to

maintain the proper temperature.

■ For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may be

ordered. See the “Accessories” section.

Convection Cooking

In a convection oven, the fan-circulated hot air continually

distributes heat more evenly than the natural movement of air in a

standard thermal oven. This movement of hot air helps maintain a

consistent temperature throughout the oven, cooking foods more

evenly, crisping surfaces while sealing in moisture and yielding

crustier breads.

During convection baking or roasting, the bake, broil and

convection elements cycle on and off in intervals while the fan

circulates the hot air. During convection broiling, the broil and

convection elements cycle on and off. The convection fan will not

be on during the ﬁrst 5 minutes of the cycle.

If the oven door is opened during convection cooking, the fan will

turn off immediately. It will come back on when the oven door is

closed.

With convection cooking, most foods can be cooked at a lower

temperature and/or a shorter cooking time than in a standard

thermal oven. When using Manual Convect Modes, reduce the

time and temperature when setting the oven. Use the following

chart as a guide.

Convection Mode Time/Temp. Guidelines

Convection Bake 25°F (15°C) lower temperature,

possible shortened cooking time

Convection Roast Cooking time shortened by up to 30%

Convection Broil Shortened cooking time

When using Auto Convect Modes, the oven will automatically

adjust the time or temperature for the selected mode.

Convect Modes

Manual Convect Modes:

Convect Bake - Multiple-rack baking or cookies, biscuits, breads,

casseroles, tarts, tortes, cakes.

Convect Roast - Whole chicken or turkey, vegetables, pork roasts,

beef roasts.

Convect Broil - Thicker cuts or unevenly shaped pieces of meat,

ﬁsh or poultry.

Auto Convect Modes:

Meats - Chicken: whole and pieces; meat loaf; roasts: pork, beef,

ham.

Baked Goods - Biscuits, quick breads, yeast breads, cakes,

cookies, casseroles.

Others - Frozen convenience foods: french fries, nuggets, ﬁsh

sticks, lasagna, pizza.

Proong Bread

Prooﬁng bread prepares the dough for baking by activating the

yeast. Follow the recipe directions as a guide. Proof should be

used for fresh dough, thawed dough, and for the ﬁrst and second

rise.

To Proof:

Before ﬁrst prooﬁng, place the dough in a lightly greased bowl and

cover loosely with wax paper, coated with shortening. Place on

rack guide 2 and close the oven door.

NOTE: If the temperature of the oven is greater than 120°F (49°C),

“Oven Cooling” will be displayed until the temperature is less than

120°F (49°C).

1. Press PROOF.

2. Press START.

Let the dough rise until nearly doubled in size. Prooﬁng time

may vary depending on dough type and quantity.

3. Press CANCEL UPPER when ﬁnished prooﬁng.

Before second prooﬁng, shape the dough, place it in baking pan(s)

and cover loosely. Follow the same placement and control steps

above. Before baking, remove the cover.

NOTE: If the oven temperature is greater than 120°F (49°C), the

display will indicate “Oven Cooling” until the temperature is below

120°F (49°C).

Favorite

Favorite stores the oven mode and temperature for your favorite

recipe. Favorite can only be stored for the upper oven.

To Save a Recipe:

1. While the oven is being used for Bake, Broil, Convect Bake,

Convect Roast or Convect Broil, press FAVORITE. Press the

“1” keypad to select the upper oven, or press the “2” keypad

to select the lower oven.

2. The current oven mode, cook time and temperature will be

displayed. “SAVED” will be displayed. The recipe has been

saved.

NOTE: Only one recipe can be saved at per oven. Saving a

new recipe will overwrite a previously saved recipe.

To Select the Favorite Recipe:

1. Press FAVORITE. Press the “1” keypad to select the upper

oven, or press the “2” keypad to select the lower oven. The

saved oven mode, time, and temperature will be displayed.

2. Press START.

3. Once the recipe is selected, oven will begin preheating to the

set program.

4. To change the temperature, press the number keypads to set

the desired temperature.

5. Press START.

6. To change the cook time, press COOK TIME.

7. Press the number keypads to set the desired cook time.

8. Press START.

9. Press CANCEL when ﬁnished cooking.

Cook Time

To Set a Timed Cook:

1. Press BAKE, BROIL, or press AUTO CONVECT MODES or

MANUAL CONVECT MODES until the desired convection

mode appears on the display.

2. Press the number keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The cook time oven indicator light will

light up.

4. Press the number keypads to enter the length of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically.

6. Press CANCEL for the desired oven to clear the display.

To Set a Delayed Timed Cook:

1. Press BAKE, BROIL, or press AUTO CONVECT MODES or

MANUAL CONVECT MODES until the desired convection

mode appears on the display.

2. Press the number keypads to enter a temperature other than

the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press number keypads to enter the length of time to cook.

5. Press DELAY START.

6. Press number keypads to enter the number of hours and/or

minutes you want to delay the start time.

7. Press START.

When the start time is reached, the oven will automatically turn

on. The temperature and/or time settings can be changed anytime

after the oven turns on by repeating steps 2 through 4. When the

set cook time ends, the oven will shut off automatically.

8. Press CANCEL for the desired oven to clear the display.

Baking Drawer

The Baking Drawer is highly recommended for baking frozen

foods. Use the temperature and medium cook time given on the

frozen food packaging. For example, if the packaging suggests a

cook time of 15 to 20 minutes, set the cook time for 17 minutes.

Check food for doneness before removing from the Baking

Drawer.

The Baking Drawer may also be used for conventional baking

and keeping hot cooked foods warm. It is not recommended to

prepare foods taller than the height of the baking drawer rack

handles or foods that may rise above 2½" (6.4 cm) in the

Baking Drawer.

IMPORTANT: Always use the baking drawer rack when using the

Baking Drawer.

A. Baking drawer

B. Baking drawer rack

C. Baking drawer rack handles

See the “General Cleaning” section for more information.

To Bake with the Baking Drawer:

1. Press LOWER OVEN BAKE.

2. Set the desired temperature between 170°F and 451°F

(75°C and 233°C) using the number keypads. The default

temperature is 350°F (180°C).

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press CANCEL LOWER when ﬁnished.

6. Remove food from the drawer.

To Keep Warm with the Baking Drawer:

Food must be at serving temperature before placing it in the

warmed drawer.

1. Place food in the baking drawer.

2. Press LOWER OVEN KEEP WARM.

3. Set the desired temperature between 145°F and 190°F (63°C

and 88°C) using the number keypads. The default temperature

is 170°F (75°C).

4. Press START.

5. Press CANCEL LOWER when ﬁnished.

6. Remove food from the baking drawer.

Oven Light

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the Off position.

To Replace:

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb by turning clockwise.

5. Replace bulb cover by turning clockwise.

6. Plug in range or reconnect power.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Range Care

Clean Cycle

AquaLift

Technology is an innovative cleaning solution that

utilizes heat and water to release baked-on spills from the oven in

less than 1 hour. This new cleaning technology is a low-heat, odor-

free alternative to traditional self-cleaning options.

Allow the oven to cool to room temperature before using the Clean

cycle. If your oven cavity is above 200°F (93°C), “Oven Cooling”

will appear in the display, and the Clean cycle will not be activated

until the oven cavity cools down.

To Clean:

1. Remove all racks and accessories from the oven cavity and

wipe excess soil. Use a plastic scraper to remove easily-

removed soils.

2. Pour 1¾ cups (14 oz [414 mL]) of distilled or ﬁltered water onto

the bottom of the empty oven and close the oven door.

IMPORTANT: Do not use chemicals or other additives with the

water. Do not open the oven door during the Clean cycle. The

water on the oven bottom is hot.

3. Press AQUALIFT SELF CLEAN and then START on the oven

control panel.

4. Allow 40 minutes for cleaning and cool down. A beep will

sound when the Clean cycle is complete.

5. Press CANCEL UPPER at the end of the cycle. Cancel Upper

may be pressed at any time to stop the Clean cycle.

6. Remove the residual water and loosened soils with a sponge

or cloth immediately after the Clean cycle is complete. Much

of the initial 1¾ cups (14 oz [414 mL]) of water will remain in

the oven after the cycle is completed. If additional soils remain,

leave a small amount of water in the oven bottom to assist

with the cleaning.

7. If any soils remain, remove them with a non-scratch scrubbing

sponge or plastic scraper. Additional Clean cycles may be run

to help remove the stubborn soils.

IMPORTANT: Do not use oven cleaners. The use of chemicals,

including commercial oven cleaners or metal scouring pads,

may cause permanent damage to the porcelain surface of the

oven interior.

NOTES:

■ The range should be level to ensure that the entire surface

of the bottom of the oven cavity is covered by water at the

beginning of the Clean cycle.

■ For best results, use distilled or ﬁltered water. Tap water may

leave mineral deposits on the oven bottom.

■ Before removing the residual water and loosened soils at the

end of the Clean cycle, insert a cloth or paper towel between

the lower edge of the oven door and the front frame to keep

water from spilling onto the front of the range and the ﬂoor.

■ Soil baked on through several cooking cycles will be more

difﬁcult to remove with the Clean cycle.

■ Nonabrasive scrub sponges or eraser style cleaning pads

(without cleaners) can be effective for cleaning the oven cavity

walls, oven door and oven bottom for difﬁcult soils. For best

results, moisten the pads and sponges before use.

■ Run an additional Clean cycle for stubborn soils.

■ affresh

Kitchen Appliance Cleaner and affresh

Cooktop

Cleaner may be used to clean the oven bottom, walls and

door when the oven has ﬁnished the cycle and returned to

room temperature. If affresh

Cooktop Cleaner is used, it is

recommended to wipe out the cavity with distilled water as

well. Refer to the “Accessories” section for information on

ordering.

■ Additional AquaLift

Technology Cleaning Kits may be

obtained by ordering Part Number W10423113RP. See the

“Accessories” section for more information.

■ For assistance with AquaLift

Technology, call

1-877-258-0808 in the U.S.A., or 1-800-807-6777 in Canada,

or visit our website at http://whirlpoolcorp.com/aqualift.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and

the oven and cooktop are cool. Always follow label instructions

on cleaning products. For additional information, you can visit

the Frequently Asked Questions (FAQs) section of our website at

www.jennair.com. In Canada, reference the Customer Service

section at www.jennair.ca.

Soap, water and a soft cloth or sponge are suggested ﬁrst unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire range is cool. These spills may

affect the ﬁnish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model/serial/rating plate because

scrubbing may remove numbers.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-ﬁlled scouring pads, abrasive cleaners, Cooktop Cleaner,

steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time

or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ affresh

Stainless Steel Cleaner Part Number W10355016 (not

included):

See the “Accessories” section for more information.

Yellow Heat Stains:

1. Add 1 tbs (15 mL) of table salt to ¼ cup (59.1 mL) of vinegar,

and then stir for 1 minute. Not all of the salt will dissolve.

2. Using a soft cloth, soak up the liquid of the vinegar mixture.

Dab the wet cloth onto the yellow stains for 3 to 4 minutes.

The wetter the stainless steel is, the better the cleaning results

will be.

3. Let sit until the yellow stains have faded. Using a dry soft cloth,

wipe off the remaining vinegar mixture.

4. Repeat steps 1 to 3 until all yellow stains have been removed.

5. Using clean water and a fresh soft cloth, clean off any

remaining residue. Dry with a clean soft cloth.

6. Use affresh

Stainless Steel Cleaner Part Number W10355016

(not included) to protect and polish the cleaned surface.

NOTE: Remove surface grates before cleaning rear vent trim.

Avoid dripping the vinegar mixture into the vent holes or down the

back of the range.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia or sodium hydroxide (lye) because paint surface may

stain.

PORCELAIN-COATED GRATES AND CAPS

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the cooktop, grates and caps are cool.

These spills may affect the ﬁnish.

To avoid chipping, do not bang grates and caps against each

other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Cleaning Method:

■ Nonabrasive plastic scrubbing pad and mildly abrasive

cleanser:

Clean as soon as cooktop, grates and caps are cool.

■ Dishwasher (grates only, not caps):

Use the most aggressive cycle. Cooked-on soils should be

soaked or scrubbed before going into a dishwasher.

Although the burner grates are durable, they may lose their

shine and/or discolor when washed in a dishwasher.

■ Gas Grate and Drip Pan Cleaner Part Number 31617:

See the “Accessories” section for more information.

SURFACE BURNERS

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the cooktop, grates and caps are cool.

These spills may affect the ﬁnish.

To avoid chipping, do not bang grates and caps against each

other or hard surfaces such as cast iron cookware.

Do not reassemble caps on burners while wet.

Do not clean in the Self-Cleaning cycle.

Do not clean in dishwasher.

Cleaning Method:

■ Nonabrasive plastic scrubbing pad and mildly abrasive

cleanser:

Clean as soon as cooktop, grates, burners and caps are cool.

■ Gas Grate and Drip Pan Cleaner (not included).

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool,

abrasive cleansers or oven cleaner.

To avoid damage, do not soak knobs. When replacing knobs,

make sure knobs are in the Off position.

On some models, do not remove seals under knobs.

Cleaning Method:

■ Soap and water:

Pull knobs straight away from control panel to remove.

GRIDDLE

To avoid damaging the nonstick surface, do not use steel wool or

abrasive cleaners.

Cleaning Method:

■ Mild detergent

■ Dishwasher:

Although the griddle is durable, it may lose its shine and/or

discolor when washed in a dishwasher.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths or abrasive paper

towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

BAKING DRAWER

Check that baking drawer is cool and empty before cleaning.

Baking drawer can be removed for easier cleaning. See the

“Removing the Baking Drawer” section for instructions.

Food spills should be cleaned when oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting or faint white spots can result.

Cleaning Method:

■ Mild detergent

OVEN CAVITY

Use AquaLift

Technology regularly to clean oven spills.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting or faint white spots can result.

Cleaning Method:

■ Clean cycle: See “Clean Cycle” section.

Remove/Replace Drawer

Remove all items from inside the baking drawer, and then allow

the range to cool completely before attempting to remove the

drawer.

To Remove:

1. Open the drawer to its fully open position.

2. Using a ﬂat-blade screwdriver, gently loosen the drawer

from the glide alignment notch, and then lift up the drawer

alignment tab from the glide.

A. Flat-blade screwdriver

B. Drawer alignment tab

C. Drawer glide notch

3. Repeat Step 2 on the other side. The drawer is no longer

attached to the drawer glides. Using both hands, pick up the

drawer to complete the removal.

To Replace:

1. Align the forward drawer notches with the notches in the

drawer glides on both sides. Place the rear alignment tabs into

the drawer glides on both sides.

A. Drawer alignment tab

B. Drawer glide notch

2. Push the drawer in all the way.

3. Gently open and close the drawer to ensure it is seated

properly on the glides on both sides.

La page charge ...

Jenn-Air JGS1450FB Mode d'emploi

Marque: Jenn-Air

Modèle: JGS1450FB

Catégorie: Cuisinières

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Jenn-Air JGS1450FB User guide

Jenn-Air JGS1450FB Mode d'emploi

Jenn-Air JGS1450FB Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents