Samsung UN26C4000 Le manuel du propriétaire

BN68-02624B-02

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Country

Customer Care Center

Web Site

Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga, Ontario

L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la

Clientèle 55 Standish Court Mississauga, Ontario

L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us Samsung Electronics America, Inc.

105 Challenger Road

Ridgeeld Park, NJ 07660-0511

[UC400019-Canada]BN68-02624B-02L02.indb 1 2010-03-12 오후 4:47:06

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.

The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and

the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format

television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics

and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven

aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned

in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)

products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service

in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the

warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited

Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service

Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those

encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or

replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news

bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause uneven wear of the screen, which will affect image quality. To

reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display a full screen image.

• Reducing brightness and contrast will help to avoid the appearance of after-images.

• Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

Installation with a stand. Installation with a wall-mount.

4 inches

[UC400019-Canada]BN68-02624B-02L02.indb 2 2010-03-12 오후 4:47:06

3

Contents

ENGLISH

English

Getting Started

y List of Features ......................................................... 4

y Accessories .............................................................. 4

y Install the Stand

(UN19C4000, UN22C4000) ...................................... 5

y Install the Stand (UN26C4000) .................................. 5

y Viewing the Control Panel ......................................... 6

y Viewing the Remote Control ...................................... 7

y Connecting to an Antenna ........................................ 8

y Plug & Play (Initial Setup) ........................................... 8

Connections

y Connecting to an AV Device ...................................... 9

y Connecting to an Audio Device ............................... 10

y Connecting to a PC ................................................ 11

y Changing the Input Source ..................................... 12

Basic Features

y How to Navigate Menus .......................................... 12

y Channel Menu ........................................................ 13

Seeing Channels 13

Using Favorite Channels 13

Memorizing channels 14

Editing Channels 14

Other Features 14

y Picture Menu .......................................................... 15

Changing the Preset Picture Mode 15

Adjusting Picture Settings 15

Economical Solutions 16

Changing the Picture Options 16

Setting up the TV with Your PC 18

y Sound Menu ........................................................... 18

Changing the Preset Sound Mode 18

Adjusting Sound Settings 18

Sound Settings 18

y Setup Menu ............................................................ 19

Setting the Time 19

Using the Sleep Timer 20

Setting the On / Off Timer 20

Locking Programs 20

Other Features 22

Picture In Picture (PIP) 23

y Support Menu ......................................................... 23

Advanced Features

y Media Play .............................................................. 25

Connecting a USB Device 25

Screen Display 26

Playing Multiple Files 29

Media Play - Additional Functions 29

y Anynet+ ................................................................. 31

Setting Up Anynet+ 32

Switching between Anynet+ Devices 32

Recording 32

Listening through a Receiver 33

Troubleshooting for Anynet+ 33

Other Information

y Assembling the Cables ........................................... 34

y Installing the Wall Mount ......................................... 34

y Anti-theft Kensington Lock ...................................... 36

y Securing the TV to the Wall ..................................... 36

To Avoid the TV from Falling 36

y Troubleshooting ...................................................... 37

y License ................................................................... 39

y Speciﬁcations ......................................................... 40

y Dimensions ............................................................. 41

y Index ...................................................................... 42

Check the Symbol!



This function can be used by pressing the

TOOLS button on the remote control.

Note

Indicates additional information.

Step by Step Guide

Check here for instructions on how to open

the relevant submenu within the OSD (on

screen display).

TOOLS

[UC400019-Canada]BN68-02624B-02L02.indb 3 2010-03-12 오후 4:47:07

4

Getting Started

English

Getting Started

List of Features

y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed

without a cable box / STB (Set-Top-Box) satellite receiver (Set-Top Box).

y Media Play: Allows you to play music ﬁles, pictures, and movies saved on a USB device (p. 25).

y Self Diagnosis: You can check to make sure picture and sound operate normally (p. 23).

Accessories

✎

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

y Remote Control (BN59-00996A) & Batteries (AAA x 2)

y Owner’s Instructions

y Warranty Card / Safety Guide / Quick Setup Guide

y Cleaning Cloth (BN63-01798B)

y Power Cord (3903-000527)

Blanking Bracket (BN63-06542B) Cable Tie

(26 inch model Only) (BN61-05596A)

Holder-Wire stand

(BN61-05596A)

(26 inch model Only)

Holder-Wire (3EA)

(BN61-05373A)

(26 inch model Only)

Holder-Ring (4EA)

BN61-05280A

(26 inch model Only)

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

y Maximum thickness - 0.55 inches (14mm)

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

(M4 X L8)

[UC400019-Canada]BN68-02624B-02L02.indb 4 2010-03-12 오후 4:47:09

5

01 Getting Started

English

Install the Stand (UN19C4000, UN22C4000)

See separate guide for installing the stand.

Stand Base Stand Body

Follow the steps below to connect the TV to the stand.

RELEASE

LOCK

ELEASE

SE

LOC

RELEA

1. Insert the stand body into the

stand base.

2. Screw the stand base to the stand

body.

3. Slide the TV onto the stand body.

✎

NOTE

x

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.

x

Lay the product down, with the screen facing up and fasten the screws.

Install the Stand (UN26C4000)

See separate guide for installing the stand.

s

Stand (1EA) Guide Stand (1EA) Screws (10EA)

Follow the steps below to connect the TV to the stand.

s

1

s

2

1. Connect the Guide Stand to the Stand

using four screws (M4 X L12) as shown.

2. With your TV upright,

connect the TV to the Stand

as shown.

3. Fasten two screws (M4 X

L8) at position 1, and then

fasten three screws (M4 X

L8) at position 2.

✎

NOTE

x

Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them.

x

Make sure that at least two persons lift and move the LED TV.

x

Stand the product up and fasten the screws. If you fasten the screws with the LED TV placed down, it may lean to

one side.

s

Top view

Rear

Guide Stand

Screws (M4 X L12)

Stand

(A)

(B)

5EA (M4 X L12)

5EA (M4 X L8)

[UC400019-Canada]BN68-02624B-02L02.indb 5 2010-03-12 오후 4:47:13

6

Getting Started

English

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE



Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER



button on the remote control.

MENU Displays an on-screen menu, the OSD (on screen display) of your TV’s features.



Adjusts the volume. In the OSD, use the



buttons as you would use the

◄ and ► buttons on the remote control.



Changes the channels. In the OSD, use the



buttons as you would use the

▼ and ▲ buttons on the remote control.



(Power)

Turns the TV on or off.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Remote control sensor

Power Indicator

Speakers

[UC400019-Canada]BN68-02624B-02L02.indb 6 2010-03-12 오후 4:47:13

7

01 Getting Started

English

Viewing the Remote Control

✎

This is a special remote control for the visually impaired and has Braille points on the Power, Channel and Volume

buttons.

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote

control. Avoid use when nearby fluorescent lights or neon

signs.

x

The color and shape may vary depending on the model.

FAV.CH

CHLIST

TOOLS

POWER SOURCE

PRE-CH

RETURN

S.MODE

MEDIA.P

P.MODE

P.SIZE

CC

SLEEP

A B C D

MTS

EXIT

INFO

MENU

HDMI

Turns the TV on and off

Returns to the previous channel.

Cuts off the sound temporarily.

Displays the channel list on the screen

(p. 13).

Changes channels.

Displays and selects the available video

sources (p. 12).

Displays Favorite Channel Lists on the

screen (p. 13).

Displays information on the TV screen.

Selects the on-screen menu items and

changes the values seen on the menu.

Exits the menu.

S.MODE: Press to select the sound

mode (p. 18).

SLEEP: Automatically shuts off the TV at

a preset time (p. 20).

MTS: Press to choose stereo, mono

or Separate Audio Program (SAP

broadcast) (p. 19).

P.MODE: Press to select the picture

mode (p. 15).

P.SIZE: Selects the picture size (p. 17).

CC: Controls the caption decoder (p.

22).

Press to directly access channels.

Press to select additional channels

(digital) being broadcasted by the same

station. For example, to select channel

"54-3", press "54", then press" - "and

"3".

Adjusts the volume.

Brings up the OSD.

Displays Media Play (p. 25).

Quickly select frequently used functions.

Returns to the previous menu.

Buttons used in the Channel list,

Media Play menu, etc.

Use these buttons in Media Play and

Anynet+ modes (p. 25, 31).

(



: Controls recording for Samsung

recorders that have the Anynet+ feature)

Selects the HDMI mode directly.

[UC400019-Canada]BN68-02624B-02L02.indb 7 2010-03-12 오후 4:47:14

8

Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

✎

If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port properly.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER



button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER



button.

Select the desired OSD (On Screen Display) language.

P

POWER

2

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER



button.

y Select the Home Use mode. Store Demo Mode is for retail

environments.

y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you

see the volume OSD, press and hold MENU for 5 sec.

3

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER



button. Select Air, Cable or Auto.

4

Selecting a channel

Press the ▲ or ▼ button, then press the ENTER



button. Select the channel source

to memorize. When setting the antenna source to Cable, a step appears allowing you to

assign numerical values (channel frequencies) to the channels. For more information, refer to

Channel → Auto Program

(p. 14).

✎

Press the ENTER



button at any time to interrupt the memorisation process.

5

Setting the Clock

Mode

Set the Clock Mode automatically or manually.

y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.

y Manual: Allows you to manually set the current date and time.

(p. 19).

6

Viewing the HD

Connection Guide.

y The connection method for the best HD screen quality is displayed.

7

Enjoy your TV.

Press the ENTER



button.

If You Want to Reset This Feature...



MENU



→ Setup → Plug & Play → ENTER



Power Input

ANT OUT

VHF/UHF Antenna

or

Cable

[UC400019-Canada]BN68-02624B-02L02.indb 8 2010-03-12 오후 4:47:15

9

English

02 Connections

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

✎

HDMI IN 1(DVI), 2, PC/DVI AUDIO IN

x

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack for video. A DVD, Blu-ray

player, HD cable box, or HD STB satellite receiver may require a DVI-HDMI (DVI to HDMI) cable or DVI-HDMI (DVI

to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

x

If an external device such as a DVD / Blu-ray player / HD cable box / HD STB satellite receiver supporting

HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound

/ annoying flicker / abnormal color).

x

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and

request an upgrade.

x

It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

connection error may occur.

Using a Component (up to 1080p) or Audio/Video (480i only) Cable

Available devices: Digital Audio System, Ampliﬁer, Home Theater

✎

COMPONENT IN / AV IN: When connecting to AV IN, the color of the AV IN [Y/VIDEO] jack (green) will not

match the video cable (yellow).

✎

For better picture quality, the Component connection is recomended over the A/V connection.

✎

If the size of the cable mold part was an abnormal shape, the part may not be connected to the input port

properly.

R

G

B W R

WR R GB

Y

W

R

W

R

AUDIO OUT

R-AUDIO-L

PR

PB Y

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

VIDEO OUT

Y

W

R

G

BWR

Red RedRedWhite BlueWhiteYellow Green

HDMI OUT

DVI OUT

AUDIO OUT

R-AUDIO-L

WR

Device Device

Device

Red White

Device

[UC400019-Canada]BN68-02624B-02L02.indb 9 2010-03-12 오후 4:47:16

10

English

Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable or Headphone Connection

Available devices: Digital Audio System, Ampliﬁer, DVD Home Theater

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver amplifier or DVD home theater is set to on, you can hear sound output from the TV’s optical

jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the amplifier or DVD home

theater. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-

Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the amplifier or

DVD home theater. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray

player / cable box / STB satellite receiver directly to an amplifier or home theater.

✎

HEADPHONE



: You can connect your headphones to the headphones output on your set. While the

headphones are connected, the sound from the built-in speakers will be disabled.

x

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

✎

AUDIO OUT: Connects to the audio input jacks on your amplifier/home theater.

x

When connecting, use the appropriate connector.

x

When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the amplifier’s volume control.

UN19C4000, UN22C4000

UN26C4000

OPTICAL

R-AUDIO-L

AUDIO IN

WR

Digital Audio System

Ampliﬁer /

DVD home theater

Red White

[UC400019-Canada]BN68-02624B-02L02.indb 10 2010-03-12 오후 4:47:17

11

English

02 Connections

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link

EX-LINK: Connector for service only.

Connecting to a PC

Using an HDMI/DVI cable or a D-sub cable

AUDIO OUT

DVI OUT

AUDIO OUT

PC OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360 x 768 @ 60 Hz.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+/-

-/+

MAC

640 x 480

832 x 624

35.000

49.726

66.667

74.551

30.240

57.284

-/-

VESA CVT

720 x 576

1280 x 720

35.910

56.456

59.950

74.777

32.750

95.750

-/+

VESA DMT

640 x 480

800 x 600

1024 x 768

1280 x 720

1360 x 768

31.469

37.500

37.861

37.879

46.875

48.077

48.363

56.476

60.023

45.000

47.712

59.940

75.000

72.809

60.317

75.000

72.188

60.004

70.069

75.029

60.000

60.015

25.175

31.500

40.000

49.500

50.000

65.000

75.000

78.750

74.250

85.500

-/-

+/+

-/-

+/+

VESA GTF 1280 x 720 52.500 70.000 89.040 -/+

✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

[UC400019-Canada]BN68-02624B-02L02.indb 11 2010-03-12 오후 4:47:19

12

English

Connections

Changing the Input Source

Source List

Use to select TV or an external input sources

such as a DVD / Blu-ray player / cable box /

STB satellite receiver.



MENU



→ Input → Source List →

ENTER



■ TV / PC / AV / Component / HDMI1/DVI /

HDMI2 / USB

✎

You can only choose external devices that

are connected to the TV. In the Source List,

connected inputs will be highlighted.

✎

In the Source List, PC is always activated.

Edit Name



MENU



→ Input → Edit Name → ENTER



■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make

your input source selection easier.

✎

When a PC with a resolution of 1360 x 768 @ 60Hz is

connected to the HDMI IN 1(DVI) port, you should set

to DIV PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI) port, you should set to DVI PC or DVI

Devices mode under Edit Name.

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

F

AV.CH

C

HLIS

T

OO

L

S

SO

UR

CE

P

RE-

C

H

S

.M

O

DE

MEDIA

.

P

.M

O

D

E

P

.

S

IZ

E

CC

S

LEEP

A

B

C

D

MT

S

INF

O

PO

WER

4

1

2

3

EXIT

MENU

EXIT

RETURN

1 MENU button: Displays the main on-screen menu.

2 ENTER



/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU



The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon with the ▲ or ▼

button.

3

ENTER



Press ENTER



to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER



Press ENTER



to conﬁrm the

selection.

7

EXIT



Press EXIT.

SOURCE

[UC400019-Canada]BN68-02624B-02L02.indb 12 2010-03-12 오후 4:47:19

13

English

03 Basic Features

CH LIST

Channel Menu

 Seeing Channels

Channel List

Add, delete or set Favorite nels and use the

program guide for digital broadcasts.



MENU



→ Channel → Channel List

→ ENTER



Select a channel in the All Channels,

Added Channels, Favorite or Programmed

screen by pressing the ▲ / ▼ and ENTER



buttons. Then you can watch the selected channel.

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■



Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved

programs.

✎

Using the color buttons with the Channel List

x

Red (Antenna): Switches to Air or Cable.

x

B

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The



mark appears to the left of the selected channels.

x

 (Page): Move to next or previous page.

x



(Tools): Displays the Channel List option menu.

(The options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Operations



A channel selected.



A channel set as a Favorite.



A reserved Program.

 Using Favorite Channels



MENU



→ Channel → Channel List → ENTER



Add to Favorite / Delete from Favorite



Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel using the Add to Favorite or

Delete from Favorite menu respectively.

To show all Favorite channels, click on the

button shown on the right.

FAV.CH

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Air Antenna

B

Zoom Select Page



Tools

Added Channels

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Air Antenna

B

Zoom Select Page



Tools

Added Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

[UC400019-Canada]BN68-02624B-02L02.indb 13 2010-03-12 오후 4:47:21

14

English

Basic Features

 Memorizing channels



MENU



→ Channel → ENTER



Antenna (Air / Cable)



Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

■ Air: Air antenna signal.

■ Cable: Cable antenna signal.

■ Auto: Air and Cable antenna.

✎

NOTE

x

When selecting the Cable TV system: STD, HRC

and IRC identify various types of cable TV systems.

Contact your local cable company to identify the

type of cable system that exists in your particular

area. At this point, the signal source has been

selected.

x

After all the available channels are stored, it starts

to remove scrambled channels. The Auto program

menu then reappears.

 Editing Channels



MENU



→ Channel → Channel List → ENTER



Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

■ Channel Name Edit (analog channels only): Assign your

own channel name.

 Other Features



MENU



→ Channel → ENTER



Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER



button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER



button.

✎

This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options (Add

/ Delete, Timer Viewing, Select All / Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Add / Delete: Delete or add a channel to display the

channels you want.

✎

NOTE

x

All deleted channels will be shown on the

All Channels menu.

x

A gray-colored channel indicates the channel

has been deleted.

x

The Add menu only appears for deleted

channels.

x

Delete a channel from the Added Channels or

Favorite menu in the same manner.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time ﬁrst to use this function.

1. Press the ◄ / ► / ▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select

Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for

entering the date and time.

✎

If you selected Once, Every Week or

Every Day in Repeat, you can enter the date

you want.

4. Select OK, then press the ENTER



button when

done.

[UC400019-Canada]BN68-02624B-02L02.indb 14 2010-03-12 오후 4:47:22

15

English

03 Basic Features

✎

NOTE

x

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

Programmed menu.

x

When a digital channel is selected, press the ►

button to view the digital program.

■ Select All: Select all the channels in the channel list.

■ Deselect All: Deselect all the selected channels.

✎

You can only select Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved

to watch. Programmed timer viewing is displayed here.

Highlight a program and press the TOOLS button to display

Options.

■ Change Info: Change a show you have reserved to

watch. Begin with step 3 of “Timer Viewing,” above.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

✎

This deletes the highlighted or selected

program(s).

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

Information.)

✎

Alternatively, you can view Information by

highlighting a program and pressing the

ENTER



button.

■ Select All / Deselect All: Select or deselect all reserved

programs.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually. Scroll to the left or right until the image

is clear.

✎

Settings are applied to the channel your currently

watching.

✎

Fine tuned channels that have been saved are marked

with an asterisk “*” on the right-hand side of the

channel number in the channel banner.

✎

To reset the fine-tuning, select Reset.

Picture Menu

 Changing the Preset Picture Mode



MENU



→ Picture → Mode → ENTER



Mode



Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal

environment.

■ Movie: Suitable for watching movies in a

dark room.

 Adjusting Picture Settings

Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)



MENU



→ Picture → ENTER



Your television has several setting options for picture quality

control.

✎

NOTE

x

When you make changes to Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R) the

OSD will be adjusted accordingly.

x

In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

P.MODE

[UC400019-Canada]BN68-02624B-02L02.indb 15 2010-03-12 오후 4:47:22

16

English

Basic Features

 Economical Solutions

Eco Solution



MENU



→ Picture → Eco Solution → ENTER



■ Energy Saving (Off / Low / Medium / High /

Picture Off / Auto): This adjusts the brightness of the

TV in order to reduce power consumption. If you select

Picture Off, the screen is turned off , but the sound

remains on. Press any button to turn on the screen

again.

■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.)

:

To avoid unnecessary energy consumption, set how long

you want the TV to remain on if it's not receiving a signal.

✎

Disabled when the PC is in power saving mode.

 Changing the Picture Options

Advanced Settings



MENU



→ Picture → Advanced Settings →

ENTER



(Advanced Settings are available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a

more precise picture.

✎

In PC mode, you can only make changes to

Dynamic Contrast, Gamma and White Balance.

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

■ Shadow Detail (-2~+2): Increase the brightness of dark

images.

■ Gamma: Adjust the primary color intensity.

■ RGB Only Mode (Off / Red / Green / Blue): Displays

the Red, Green, and Blue color for making ﬁne

adjustments to the hue and saturation.

■ Color Space (Auto / Native / Custom): Adjust the

range of colors available to create the image. To adjust

Color, Red, Green, Blue and Reset, set Color Space

to Custom.

■ White Balance: Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness.

Reset: Resets the White Balance to it's default

settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

Picture Options



MENU



→ Picture → Picture Options →

ENTER



✎

In PC mode, you can only make changes to the Color

Tone, Size, Digital Noise Filter and

Auto Protection Time.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

RGB Only Mode : Off

Color Space : Native

White Balance

▼



Move



Enter



Return

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Protection Time : 2 hours



Move



Enter



Return

[UC400019-Canada]BN68-02624B-02L02.indb 16 2010-03-12 오후 4:47:23

17

English

03 Basic Features

■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the picture

mode is Dynamic.

✎

Settings can be adjusted and stored for each external

device connected to an input on the TV.

■ Size: Your cable box/satellite receiver may

have its own set of screen sizes as well.

However, we highly recommend you use

16:9 mode most of the time.

16:9 : Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

✎

Available for HD 1080i / 720p signal in 16:9 mode.

4:3 : Sets the picture to basic (4:3) mode.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and center

of the screen may cause image retention(screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE

x

After selecting Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER



button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER



button.

5. Press the ► button to select Reset.

6. Press the ENTER



button to reset the picture

to its default position.

x

After selecting Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to

center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER



button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER



button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER



button.

x

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720)

x

Settings can be adjusted and stored for each

external device you have connected to an input on

the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

PC 16:9, 4:3

■ Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualization): If the broadcast signal received

by your TV is weak, you can activate the Digital Noise

Filter feature to reduce any static and ghosting that may

appear on the screen.

✎

When the signal is weak, try other options until the

best picture is displayed.

Auto Visualization: When changing analog channels,

displays signal strength.

✎

Only available for analog channels.

✎

When bar is green, is that the best possible signal.

■ MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide improved

picture quality.

■ HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode.

■ Film Mode (Off / Auto1 / Auto2): Sets the TV to

automatically sense and process ﬁlm signals from all

sources and adjusts the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■ Auto Protection Time (2 hours / 4 hours / 8 hours

/ 10 hours / Off): Set the time the screen remains idle

with a still image until the screen saver is activated. The

screen saver prevents the formation of ghost images on

the screen.

P.SIZE

[UC400019-Canada]BN68-02624B-02L02.indb 17 2010-03-12 오후 4:47:24

18

English

Basic Features

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

 Setting up the TV with Your PC

Set the input source to PC.



MENU



→ Picture → ENTER



Auto Adjustment



Adjust frequency values/positions and ﬁne tune the settings

automatically.

✎

Not available when connecting with an HDMI/DVI cable.

Screen

■ Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the center of screen.

■ Position: Adjust the PC’s screen positioning if it does

not ﬁt the TV screen. Press the ▲ or ▼ button to adjust

the Vertical-Position. Press the ◄ or ► button to adjust

the Horizontal-Position.

■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but

the same basic set-up information will apply in most cases.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

y The correct size setting (resolution) [Optimum: 1360 x

768 pixels]

y If a vertical-frequency option exists on your display

settings dialog box, the correct value is ‘60’ or ‘60 Hz’.

Otherwise, just click ‘OK’ and exit the dialog box.

Sound Menu

 Changing the Preset Sound Mode



MENU



→ Sound → Mode → ENTER



Mode



■ Standard: Selects the normal sound

mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for

movies.

■ Clear Voice: Emphasizes voices over

other sounds.

■ Amplify: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

 Adjusting Sound Settings



MENU



→ Sound → Equalizer → ENTER



Equalizer

Adjusts the sound mode (standard sound mode only).

■ Balance L/R: Adjusts the balance between the right and

left speaker.

■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth

frequencies.

■ Reset: Resets the equalizer to its default settings.

 Sound Settings



MENU



→ Sound → ENTER



Virtual Surround (Off / On)

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

Dialog Clarity (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog can

be heard more clearly.

S.MODE

[UC400019-Canada]BN68-02624B-02L02.indb 18 2010-03-12 오후 4:47:24

19

English

03 Basic Features

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of

simultaneous transmission of many audio tracks

(for example, simultaneous translations of the

program into foreign languages).

✎

You can only select a language among the

ones being broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■ Mono: Choose for channels that are

broadcasting in mono or if you are having

difﬁculty receiving a stereo signal.

■ Stereo: Choose for channels that are

broadcasting in stereo.

■ SAP: Choose to listen to the Separate Audio Program,

which is usually a foreign-language translation.

✎

Depending on the particular program being broadcast,

you can listen to Mono, Stereo or SAP.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■ Night: This mode provides an improved sound

experience compared to Normal mode, making almost

no noise. It is useful at night.

Speaker Select (External Speaker / TV

Speaker)

A sound echo may occur due to a difference in decoding

speed between the main speaker and the audio receiver. In

this case, set the TV to External Speaker.

✎

When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the

sound settings will be limited.

✎

When Speaker Select is set to External Speaker

x

TV Speaker: Off, External Speaker: On

✎

When Speaker Select is set to TV Speaker

x

TV Speaker: On, External Speaker: On

✎

If there is no video signal, both speakers will be mute.

SPDIF Output

SPDIF (Sony Philips Digital Interface) is used to provide digital

sound, reducing interference going to speakers and various

digital devices such as an A/V Receiver/Home theater.

■ Audio Format: During the reception of a digital TV

broadcast, you can select the Digital Audio output

(SPDIF) format from the options PCM or Dolby Digital.

■ Audio Delay: Correct audio-video sync problems, when

watching TV or video, and when listening to digital audio

output using an external device such as an AV receiver

(0ms ~ 250ms).

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Setup Menu

 Setting the Time



MENU



→ Setup → Time → ENTER



Time

■ Clock: Setting the clock is for using various timer

features of the TV.



The current time will appear every time you press

the INFO button.

✎

If you disconnect the power cord, you have to set

the clock again.

Clock Mode (Auto / Manual)

– Auto: Set the current time automatically using the

time from a digital channel.

✎

The antenna must be connected in order to set

the time automatically.

– Manual: Set the current time manually.

✎

Depending on the broadcast station and signal,

the auto time set up may not be correct. In this

case, set the time manually.

MTS

[UC400019-Canada]BN68-02624B-02L02.indb 19 2010-03-12 오후 4:47:25

20

English

Basic Features

SLEEP

Clock Set: Set Month, Day, Year, Hour, Minute and

am/pm manually.

✎

Available only when Clock Mode is set to

Manual.

✎

You can set the Month, Day, Year, Hour and

Manual directly by pressing the number buttons

on the remote control.

DST (Daylight Saving Time) (Off / On): Switches the

Daylight Saving Time function on or off.

✎

This function is only available when the

Clock Mode is set to Auto.

Time Zone: Select your time zone.

✎

This function is only available when the

Clock Mode is set to Auto.

 Using the Sleep Timer



MENU



→ Setup → Time → Sleep

Timer → ENTER



■ Sleep Timer



: Automatically

shuts off the TV after a preset period

of time. (30, 60, 90, 120, 150 and 180

minutes).

✎

To cancel the Sleep Timer, select Off.

 Setting the On / Off Timer



MENU



→ Setup → Time → Timer 1 →

ENTER



■ Timer 1 / Timer 2 / Timer 3: Three different on / off

timer settings can be made. You must set the clock ﬁrst.

On Time / Off Time: Set the hour, minute, and activate

/ inactivate. (To activate the timer with the setting you’ve

chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected

only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select Air or

Cable.

Channel (when the Source is set to TV): Select the

desired channel.

Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo ﬁles

to be played when the TV is turned on automatically.

✎

NOTE

x

If there is no music file on the USB device or the

folder containing a music file is not selected, the

Timer function does not operate correctly.

x

When there is only one photo file in the USB,

the Slide Show will not play.

x

If a folder name is too long, the folder cannot be

selected.

x

Each USB you use is assigned its own folder.

When using more than one of the same type of

USB, make sure the folders assigned to each

USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to

activate the timer.

✎

The



mark indicates the day is selected.

Auto Power Off (available only when the TV is turned on by

the Timer): The TV will be automatically turned off after 3

hours of being left idle to prevent overheating.

 Locking Programs



MENU



→ Setup → Security → ENTER



Security

The PIN input screen appears, Enter your 4 digit PIN number.

■ V-Chip: The V-Chip feature automatically locks out

programs that are deemed inappropriate for children.

The user must enter a PIN (personal identiﬁcation

number) before any of the V-Chip restrictions are set up

or changed.

✎

NOTE

x

V-Chip is not available in HDMI, Component

or PC mode.

x

The default PIN number of a new TV set is

“0-0-0-0”.

x

Allow All: Press to unlock all TV ratings.

x

Block All: Press to lock all TV ratings.

10 TV Cable 1

00 00 am

▲

▼

Timer 1

On Time

Off Time

Volume

Inactivate

Sun Mon Tue Wed Thu Fri Sat

Once

Source Antenna Channel

Repeat



Move

Adjust 

Enter



Return

[UC400019-Canada]BN68-02624B-02L02.indb 20 2010-03-12 오후 4:47:25

La page est en cours de chargement...

Samsung UN26C4000 Le manuel du propriétaire

Samsung UN26C4000 Le manuel du propriétaire

dans d''autres langues

Documents connexes