DNI 3360IN-3460 / DNV 3460
DNHI 3660-3690
5019 100 75018
1.
Control panel
2.
Grease filter
3.
Lighting unit
4.
Pull-out steam deflector
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector.
3.
Remove the extraction grille.
4.
Release the grease filter.
5.
Remove the dirty grease filter.
6.
After renewing or cleaning the grease filter
(depending on model) repeat the above
steps in reverse to reassemble, making sure
the entire extraction surface is covered.
RENEWING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Open the lighting unit.
3.
Remove the burnt-out bulb and insert a new
one.
Use only 11W (max) PL bulbs.
4.
Close the lighting unit.
MOUNTING OR RENEWING THE
CARBON FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Pull out the steam deflector.
3.
Remove the extraction grille.
4.
If a carbon filter is already mounted and
needs replacing, press the release buttons
(b) and pull the filter out downwards.
5.
If the filters are not mounted.
a.
fit the carbon filter into the upper clips.
b.
fasten the filter using the lower clips.
6.
Remount the extractor grille.
CONTROL PANEL
A.
Light switch.
B.
Speed selector.
1
4
2
3
0123
0I
O
0I
small amount of steam and fumes
medium amount of steam and fumes
large amount of
steam and fumes
only for
DNI 3460
DNV 3460
DNI 3360IN-3460
DNV 3460
DNHI 3660-3690
B
A
B
A
F NL E PGBD GRI
PRODUCT DESCRIPTION SHEET