Kingston DATATRAVELER LOCKER G2/DTLPG2 Le manuel du propriétaire

Installation Guide

DataTraveler Locker+ G2

Find the language and latest documentation for your Kingston® DataTraveler Locker+ G2 here.

DataTraveler Locker+ G2 Installation Guide

Simplied Chinese .....

Traditional Chinese ....

............ For instructions in English

. . . . . . . . . . . . . . . . . . Para instrucciones en español

......... Für Anleitungen in Deutsch

. . . . . . . . . . . . . . . . . . Pour des instructions en français

. . . . . . . . . . . . . . . . . . Per le istruzioni in italiano

............Por as instruções em português

. . . . . . . . . . . . . . . . . . Instrukcje w jezyku polskim

. . . . . . . . . . . . . . . . . . Japanese

. . . . . . . . . . . . . . . . . . Thai

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 1 of 26

DataTraveler

®

Locker+ G2 User Manual

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 2 of 26

Table of Contents

About This User Guide ............................................................................................................ 3

System Requirements ............................................................................................................. 3

Recommendations .................................................................................................................. 3

Setup (Windows Environment) ............................................................................................... 4

Device Initialization (Windows Environment) ....................................................................... 5

Device Usage (Windows Environment) ................................................................................. 9

Device Options (Windows Environment) ............................................................................. 10

Setup (Mac Environment) ..................................................................................................... 14

Device Initialization (Mac Environment) .............................................................................. 15

Device Usage (Mac Environment) ........................................................................................ 19

Device Options (Mac Environment) ..................................................................................... 20

Help and Troubleshooting .................................................................................................... 24

Device Lockout ........................................................................................................................................................... 24

Forgot Password ........................................................................................................................................................ 25

Drive Letter Conflict (Windows Operating Systems) ........................................................................................ 26

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 3 of 26

About This User Guide

This user manual covers the DataTraveler

®

Locker+ G2 (referred to simply as DTL+ G2 from

this point forward) based on the factory image with no implemented customizations.

System Requirements

PC Platform

• Pentium III (or faster) processor equivalent

• 15MB free disk space

• USB 2.0 / 3.0 port

• Two consecutive drive letters after the last

physical drive*

PC Operating System Support

• Windows

®

7

• Windows

®

Vista SP1, SP2

• Windows

®

XP SP2, SP3

Mac Platform

• 15MB free disk space

• USB 2.0 / 3.0 port

Operating System Support

• Mac OS X 10.5.x

• Mac OS X 10.6.x

• Mac OS X 10.7x

Recommendations

To ensure there is ample power provided to the DTL+ G2 device, insert it directly into a USB

port on your notebook or desktop, as seen in

Figure 1.1. Avoid connecting the DTL+ G2 to any

peripheral device(s) that may feature a USB port, such as a keyboard or USB-powered hub, as

seen in Figure 1.2.

Figure 1.1 – Recommended Usage

Figure 1.2 – Not Recommended

*Note: See ‘Drive Letter Conflict’ on page 26.

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 4 of 26

Setup (Windows Environment)

1. Insert the DTL+ G2 into an available USB port on

your notebook or desktop and wait for Windows

to detect it.

• Windows XP users will receive a ‘Found New

Hardware’ notification as seen in

Figure 2.1.

• Windows Vista/7 users will receive a device

driver notification as seen in

Figure 2.2.

Once the new hardware detection is complete,

Windows will begin the initialization process.

• If the Windows autorun function is enabled,

you can skip the next step and go to page 5 –

Device Initialization.

• If the Windows autorun function is disabled, as

it is in Windows 7 by default, you may see an

AutoPlay window similar to the one in

Figure

2.3

.

2. Select the option ‘Run DTLplus_Launcher.exe’.

If Windows does not AutoPlay, simply browse to the

CD-ROM partition (

Figure 2.4) and manually execute

the DTLplus_Launcher program. This will also start

the initialization process.

Figure 2.4 – DTL+ G2 Contents

Figure 2.1 – Found New Hardware

(Windows XP)

Figure 2.2 – Device Driver Installation

(Windows Vista/7)

Figure 2.3 – AutoPlay Window

(Windows Vista/7)

(Note: Menu options in the AutoPlay

window may vary depending on what

programs are currently installed on

your computer. If enabled, AutoRun

will start the initialization process

automatically.

)

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 5 of 26

Device Initialization (Windows Environment)

1. Select your language preference from the drop-down menu and click ‘Next’ (Figure 3.1.)

Figure 3.1 – Language Selection

2. Review the license agreement and click ‘Next’ (Figure 3.2.) (Note: You must accept the

license agreement before continuing; otherwise the ‘Next’ button will remain disabled.)

Figure 3.2 – License Agreement

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 6 of 26

3. Create a password to protect your data on the DTL+ G2. Enter it in the ‘Password’ field,

then re-enter it in the ‘Password Confirmation’ field, as seen below in

Figure 3.3. The

password you create must meet the following criteria before the initialization process will

allow you to continue:

1. Passwords must contain 6 characters or more (up to 16 characters.)

2. Passwords must contain three (3) of the following criteria options:

- UPPER CASE, lower case, numeric, and/or special characters (!, $, etc.)

You may also enter a password hint, but it is not a mandatory field. The hint field can be

useful in providing a clue as to what the password is, should the password ever be

forgotten. (Note: The hint CANNOT be an exact match to the password.)

Figure 3.3 – Password Setup

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 7 of 26

4. Enter your contact information into the text boxes provided (see Figure 3.4) (Note: The

information you enter in these fields may NOT contain the password string you created in

Step 3. However, these fields are optional and can be left blank, if so desired.)

• The ‘Name’ field may contain up to 32 characters, but cannot contain the

exact password.

• The ‘Company’ field may contain up to 32 characters, but cannot contain

the exact password.

• The ‘Details’ field may contain up to 156 characters, but cannot contain

the exact password.

Figure 3.4 – Contact Information

5. Click ‘Finish’ to complete the device initialization process.

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 8 of 26

The DTL+ G2 will now format the secure data partition (Figure 3.5) and notify you when it is

complete (

Figure 3.6.)

Note: If operating under Windows XP in Non-Admin mode, the ‘Format’ routine

can take up to a minute.*

6. Click ‘OK’ to continue.

Figure 3.5 – Formatting DTL+ G2 Figure 3.6 – Format Complete

Initialization complete.

*Note: Times may vary based on system hardware and the capacity of the DTL+ G2 drive.

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 9 of 26

Device Usage (Windows Environment)

Once the DTL+ G2 has been initialized, you

can access the secure data partition and utilize

the device options by logging into the device

with your password. To do so, follow these

steps:

1. Insert the DTL+ G2 into a USB port on your

notebook or desktop and enter your pass-

word (see Figure 4.1.)

2. Once you’ve typed your password, click the

‘Login’ button to continue.

• If the correct password is entered, the

DTL+ G2 will unlock and you can

begin using the device.

• If an incorrect password is entered, an

error message will appear just below

the ‘Hint’ field, indicating a login

failure (see Figure 4.2.)

Figure 4.1 – Login Window

During the login process, if a bad password

is entered, you will be given another

opportunity to enter the correct password;

however, there is a built-in security feature

that tracks the number of failed login

attempts

*. If this number reaches the pre-

configured value of 10 failed attempts, the

DTL+ G2 will lock and require a device

format of the secure data partition prior to

next use.

THIS MEANS THAT ALL DATA STORED

ON THE DTL+ G2 WILL BE LOST.

For more details on this feature, see

‘Device Lockout’ on page 24.

Figure 4.2 – Login Failure

*Note: Once you authenticate to the device successfully, the failed login counter will reset.

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 10 of 26

Device Options (Windows Environment)

While you are logged into the device, there will be a ‘DTL+ G2’ icon located in the right-hand

corner of the Windows taskbar (

Figure 5.1.) (Note: Windows 7 users will need to click on the

up-arrow button in the taskbar in order to access the ‘DTL+ G2’ icon (

Figure 5.2.)

Clicking once on the DTL+ G2 icon will display the following menu:

Figure 5.1 – DTL+ G2 icon in taskbar

(Windows XP users)

Figure 5.2 – DTL+ G2 icon in taskbar

(Windows 7 users)

DTL+ G2 Settings

• Allows you to change your password and/or hint (Figure 5.3)

• Allows you to store username and password information (see Page 11)

• Allows you to add/view/change your contact information (Figure 5.4)

• Allows you to change your current language selection (Figure 5.5)

(Note: For security purposes, your current DTL+ G2 password is required to update and/or

modify any of these settings.)

Figure 5.3

Change Password

Figure 5.4

Contact Information

Figure 5.5

Select Language

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 11 of 26

Password Manager

Password Manager is an area found within the settings menu of the DTL+ G2 that allows you

to store and access username and password account information (for up to 20 accounts.)

To store an account, just follow these simple steps:

1. Click the ‘Add’ button (shown in Figure 5.6a) to create a new account.

2. Type in the information you would like to store, using the following criteria:

a. The ‘Description’ field is mandatory and can hold up to 40 characters.

(Note: This field must contain at least 1 character. It cannot be left blank.)

b. The ‘Username’ field is optional. It can hold up to 40 characters.

c. The ‘Password’ field is optional. It can hold up to 40 characters. By default,

each character is masked by an asterisk. If you would like to store the password

in plain text, simply de-select the ‘Hide Password’ checkbox located below the

‘Comments’ field. (See Figure 5.6b)

d. The ‘Comments’ field is optional. It can hold up to 360 characters.

3. If you would like to protect this item using a password, simply select the ‘Password

protect’ checkbox located below the ‘Comments’ field. (See Figure 5.6b)

(Note: The password used to protect this item is the same password you use to log into

the DTL+ G2 device.)

Figure 5.6a

Figure 5.6b

Password Manager Screenshots

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 12 of 26

To update or change an existing account in

‘Password Manager’, do the following:

1. Double-click the line item you wish to

update or change.

2. If you password-protected the item you

are trying to update or remove, you will be

prompted for the device password, which

is the same password you use to unlock

the DTL+ G2 device at login. You must

enter this password correctly before the

account window will open for that specific

item.

3. When the account window opens, you can

modify any of the fields by clicking in the

text box of the specific field you want to

update and make the necessary changes.

When you are finished making changes,

click on the ‘Save’ button.

To delete an existing account in ‘Password

Manager’, do the following:

1. Double-click the line item you wish to delete.

2. If you password-protected the item you are trying to delete, you will be prompted for the

device password, which is the same password you use to unlock the DTL+ G2 device at

login. You must enter this password correctly before the account window will open for

that specific item.

3. When the account window opens, simply click the ‘Remove’ button and you are finished

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 13 of 26

Browse DTL+ G2

• Allows you to browse the contents of the secure data partition while you are logged in

Format DTL+ G2*

• Allows you to format the secure data partition

(Warning: All data will be erased.) (Figure 5.7)

Online Support (Requires Internet access)

• Opens your Internet browser and navigates to

http://www.kingston.com/support/ where you

can access additional support information

Figure 5.7 – Format Warning

About DTL+ G2

• Provides specific details about the DTL+ G2,

including Application and Firmware version

information (Figure 5.8)

Shutdown DTL+ G2

• Properly shuts down the DTL+ G2, allowing

you to safely remove it from your system

Figure 5.8 – About DTL+ G2

*Note: Your current DTL+ G2 password is required in Windows Vista and Windows 7

-Windows Section Complete-

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 14 of 26

Setup (Mac Environment)

Insert the DTL+ G2 into an available USB port on your notebook or

desktop and wait for the Mac operating system to detect it. When it

does, you will see a DTLplus volume appear on the desktop, as seen in

Figure 6.1.

1. Double-click the DTL+ G2 CD-ROM icon.

2. Double-click the Mac folder found in the window displayed in

Figure 6.2.

Figure 6.1 – DTLplus

3. Double-click the DTLplus application icon found in the

window displayed in Figure 6.3. This will start the initialization

process.

Figure 6.2 – DTL+ G2 Contents

Figure 6.3 – DTL+ G2 Application

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 15 of 26

Device Initialization (Mac Environment)

1. Select your language preference from the drop-down menu and click ‘Next’ (Figure 7.1.)

Figure 7.1 – Language Selection

2. Review the license agreement and click ‘Next’ (Figure 7.2.) (Note: You must accept the

license agreement before continuing; otherwise the ‘Next’ button will remain disabled.)

Figure 7.2 – License Agreement

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 16 of 26

3. Create a password to protect your data on the DTL+ G2. Enter it in the ‘Password’ field,

then re-enter it in the ‘Password Confirmation’ field, as seen below in

Figure 7.3. The

password you create must meet the following criteria before the initialization process will

allow you to continue:

1. Passwords must contain 6 characters or more (up to 16 characters.)

2. Passwords must contain three (3) of the following criteria options:

- UPPER CASE, lower case, numeric, and/or special characters (!, $, etc.)

You may also enter a password hint, but it is not a mandatory field. The hint field can be

useful in providing a clue as to what the password is, should the password ever be

forgotten. (Note: The hint CANNOT be an exact match to the password.)

Figure 7.3 – Password Setup

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 17 of 26

4. Enter your contact information into the text boxes provided (see Figure 7.4) (Note: The

information you enter in these fields may NOT contain the password string you created in

Step 3. However, these fields are optional and can be left blank, if so desired.)

• The ‘Name’ field may contain up to 32 characters, but cannot contain the

exact password.

• The ‘Company’ field may contain up to 32 characters, but cannot contain

the exact password.

• The ‘Details’ field may contain up to 156 characters, but cannot contain

the exact password.

Figure 7.4 – Contact Information

5. Click ‘Finish’ to complete the device initialization process.

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 18 of 26

The DTL+ G2 will now format the secure data partition (Figure 7.5) and notify you when it is

complete (

Figure 7.6.)

6. Click ‘OK’ to continue.

Figure 7.5 – Formatting DTLocker+ G2 Figure 7.6 – Format Complete

Initialization complete.

Document No. 48002017-001.A03 DataTraveler

®

Locker+ G2 Page 19 of 26

Device Usage (Mac Environment)

Once the DTL+ G2 has been initialized, you

can access the secure data partition and utilize

the device options by logging into the device

with your password. To do so, follow these

steps:

1. Insert the DTL+ G2 into a USB port on your

notebook or desktop and enter your pass-

word (see Figure 8.1.)

2. Once you’ve typed your password, click the

‘Login’ button to continue.

• If the correct password is entered, the

DTL+ G2 will unlock and you can

begin using the device.

• If an incorrect password is entered, an

error message will appear just below

the ‘Hint’ field, indicating a login

failure (see Figure 8.2.)

Figure 8.1 – Login Window

During the login process, if a bad password

is entered, you will be given another

opportunity to enter the correct password;

however, there is a built-in security feature

that tracks the number of failed login

attempts

*. If this number reaches the pre-

configured value of 10 failed attempts, the

DTL+ G2 will lock and require a device

format of the secure data partition prior to

next use.

THIS MEANS THAT ALL DATA STORED

ON THE DTL+ G2 WILL BE LOST.

For more details on this feature, see

‘Device Lockout’ on page 24.

Figure 8.2 – Login Failure

*Note: Once you authenticate to the device successfully, the failed login counter will reset.

La page est en cours de chargement...

Kingston DATATRAVELER LOCKER G2/DTLPG2 Le manuel du propriétaire

Kingston DATATRAVELER LOCKER G2/DTLPG2 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents