Samsung MX-T50 Manuel utilisateur

MX-T50

FULL MANUAL

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at www.samsung.com/register

ENG - ii

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Refer to the table below for an explanation of

symbols which may be on your Samsung product.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage

is present inside. It is dangerous to

make any kind of contact with any

internal part of this product.

This symbol indicates that this product

has included important literature

concerning operation and maintenance.

Class II product : This symbol indicates

that it does not require a safety

connection to electrical earth (ground).

If this symbol is not present on a

product with a power cord, the product

MUST have a reliable connection to

protective earth (ground).

AC voltage : This symbol indicates that

the rated voltage marked with the

symbol is AC voltage.

DC voltage : This symbol indicates that

the rated voltage marked with the

symbol is DC voltage.

Caution, Consult instructions for use :

This symbol instructs the user to

consult the user manual for further

safety related information.

WARNING

 

not expose this appliance to rain or moisture.

CAUTION

 TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

 This apparatus shall always be connected to a

AC outlet with a protective grounding

connection.

 To disconnect the apparatus from the mains,

the plug must be pulled out from the mains

socket, therefore the mains plug shall be

readily operable.

 Do not expose this apparatus to dripping or



liquids, such as vases on the apparatus.

 To turn this apparatus off completely, you

must pull the power plug out of the wall

socket. Consequently, the power plug must

be easily and readily accessible at all times.

ENG - iii

PRECAUTIONS

1. Ensure that the AC power supply in your

house complies with the power



sticker located on the rear of your product.

Install your product horizontally, on a

suitable base (furniture), with enough space

around it for ventilation (7~10 cm). Make sure

the ventilation slots are not covered. Do not



equipment which may become hot. This unit

is designed for continuous use. To fully turn

off the unit, disconnect the AC plug from the

wall outlet. Unplug the unit if you intend to

leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC

plug from the wall outlet. Voltage peaks due

to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or

other heat sources. This could lead to

overheating and cause the unit to

malfunction.

4. Protect the product from moisture (i.e.



equipment creating strong magnetic or



the AC wall socket if the unit malfunctions.

Your product is not intended for industrial

use. It is for personal use only. Condensation

may occur if your product has been stored in

cold temperatures. If transporting the unit

during the winter, wait approximately

2 hours until the unit has reached room

temperature before using.

5. The battery used with this product contains

chemicals that are harmful to the

environment. Do not dispose of the battery

in the general household trash. Do not

expose the battery to excess heat, direct



disassemble, or overheat the battery.

Danger of explosion if the battery is replaced

incorrectly. Replace only with the same or

equivalent type.

ABOUT THIS MANUAL

The user manual has two parts: this simple paper

USER MANUAL and a detailed FULL MANUAL you

can download.

USER MANUAL

See this manual for safety instructions,

product installation, components,



FULL MANUAL

You can access the FULL MANUAL on

Samsung’s on-line customer support centre by

scanning the QR code. To see the manual on

your PC or mobile device, download the

manual in document format from Samsung’s

website. (http://www.samsung.com/support)



without prior notice.

Sound Tower is a new name for Giga Party Audio.

ENG - iv

CONTENTS

01 Checking the Components 2

Inserting Batteries before using the Remote Control

(AAA batteries X 2) ------------------------- 2

02 Product Overview 3

Top Panel of the Sound Tower ------------------------- 3

Rear Panel of the Sound Tower ------------------------- 4

03 Connecting the Sound Tower 6

Connecting Electrical Power

-------------------------

6

How to use Audio Group

-------------------------

7

04 Connecting an External Device 13

Connecting using an Analogue Audio (AUX) Cable

-------------------------

13

Connecting a mobile device via Bluetooth

-------------------------

14

Connecting the Samsung TV via Bluetooth

-------------------------

17

05 Connecting a USB Storage Device 18

Software Update

-------------------------

19

06 Using the Remote Control 20

How to Use the Remote Control

-------------------------

20

How to use Sound Mode

-------------------------

22

How to use the DJ Effect

-------------------------

22

ENG - v

07 Using the Samsung Sound Tower

(Giga Party Audio) app 23

Install Samsung Sound Tower (Giga Party Audio) App

-------------------------

23

Launching the Samsung Sound Tower (Giga Party Audio) App

-------------------------

23

08 Troubleshooting 24

09 Licence 25

10 Open Source Licence Notice 25

11 Important Notes About Service 25

12 SpecicationsandGuide 26



-------------------------

26

ENG - 2

01 CHECKING THE COMPONENTS

Sound Tower Main Unit Remote Control / Batteries Power Cord

 For more information about the power supply and power consumption, refer to the label attached

to the product. (Label: Rear of the Sound Tower Main Unit)

 To purchase additional components or optional cables, contact a Samsung Service Centre or

Samsung Customer Care.

 When moving the product, do not drag or pull the product from the ground. Lift the product when

moving the product.

Inserting Batteries before using the Remote Control

(AAA batteries X 2)

Slide the battery cover in the direction of the arrow

until it is completely removed. Insert 2 AAA

batteries (1.5V) oriented so that their polarity is

correct. Slide the battery cover back into position.

ENG - 3

02 PRODUCT OVERVIEW

Top Panel of the Sound Tower

BASS

󰟻

󰟶

󰟹

󰟷

󰟸

󰟺

󰟵󰟴󰟳

󰟳

Remote

Sensor

When operating the Sound Tower system, please aim the front of the remote control at

the remote sensor.

󰟴

Display

Window

Displays operating messages or current status of the Sound Tower system.

󰟵

Power Turns the Sound Tower on and off.

󰟶

Light

Press the

(Light) button to turn the Lighting Mode on.

Press the button repeatedly to cycle through the available lighting modes:

AMBIENT, PARTY, DANCE, THUNDERBOLT, STAR or OFF.

󰟷

Source

Press to select a source connected to the Sound Tower.

Press and hold the (Source)

button for more than 5 seconds

to enter the

“SEARCHING TV” mode.

󰟸

Play/Pause

 Play/Pause

Press the 



 Demo play

Press and hold the

button for more than 5 seconds to start the Demo play while

the system is turned on. “DEMO” appears on the display and it plays demo music for



To cancel Demo Play, press and hold the

button for more than 5 seconds during

Demo Play.

– If you input any commands while in demo play, 60 seconds timer is refreshed.

– All the buttons on the remote control and rear panel are disabled while in demo

play. If you want to use the remote control, cancel the demo play.

– Demo play is cancelled when you change the source or power off the system.

– Please be careful as it may play louder than the set volume.

ENG - 4

󰟹

Volume down

Press the (Volume down) button to lower the volume.

Press and hold the (Volume down) button to quickly lower the volume.

󰟺

Volume up

Press the (Volume up) button to raise the volume.

Press and hold the (Volume up) button to quickly raise the volume.

󰟻

BASS

Press the BASS button to use the powerful bass sound.

Press it again to return to the normal sound.

Press and hold the BASS button for more than 5 seconds to turn on or off the

BLUETOOTH POWER function.

Rear Panel of the Sound Tower

ADD STEREO GROUP PLAYPAIRING

AUX 1

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

USB1

(5V 2.1A)

USB2

(5V 0.5A)

ECHOVOLMIC

OUT

󰟳

󰟽 󰟼

󰟾

󰟺 󰟹 󰟸 󰟷󰟻

󰟴 󰟵 󰟶

󰟳

Bluetooth

PAIRING

Press the PAIRING button to enter the “BT PAIRING” mode.

You can connect the Sound Tower to a new Bluetooth device in this mode by selecting the

Sound Tower from the Bluetooth device's search list.

󰟴

ADD

STEREO

Press the ADD STEREO button to connect to another Sound Tower wirelessly.

Press the ADD STEREO button again before connecting another Sound Tower to exit

Stereo Group mode. When the connection is made, you can enjoy stereo sound.

Press and hold the ADD STEREO button for more than 5 seconds to disconnect the Stereo

Group mode.

󰟵

GROUP

PLAY

Press the GROUP PLAY button to connect up to ten Sound Tower systems wirelessly.

Press the GROUP PLAY button again before connecting other Sound Tower to exit

wireless Group Play. When the connection is made, you can use multiple Sound Tower

systems at the same time using Group Play mode. Press and hold the GROUP PLAY

button for more than 5 seconds to disconnect the wireless Group Play mode.

󰟶

USB1

Connect a USB device to the USB1 or USB2 ports on the main unit.

If you connect your cell phone to the USB1 port, you can charge it.

 Press the (Source) button to select USB1 or USB2.

󰟷

USB2

ENG - 5

󰟸

ECHO

You can give an echo effect to the sound from a connected microphone (MIC) by adjusting

the ECHO knob.

If you turn clockwise, the echo effect goes up, and if you turn counter-clockwise, the echo

effect goes down.

󰟹

VOL

Use the VOL knob to adjust the volume of a connected microphone (MIC).

If you turn clockwise, the volume goes up, and if you turn counter-clockwise, the volume

goes down.

󰟺

MIC Connect your microphone to the MIC jack.

󰟻

GROUP

PLAY OUT

Terminals

Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the main

unit to Audio In on an external analogue output device.

 Be sure to match connector colours.

 If the external analogue output device has only one Audio In jack, connect either left or

right.

󰟼

AUX2/

GROUP

PLAY IN

Terminals

Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit to

Audio Out on an external analogue output device.

 Be sure to match connector colours.

 If the external analogue output device has only one Audio Out jack, connect either left

or right.

 Press the (Source) button to select AUX2.

 If the product is in AUX2 mode with no playback and no command input for more than

20 minutes, the system will turn off.

 If the product is in AUX2 mode with playback for more than 8 hours and no command

input, the system will turn off.

󰟽

AUX1

Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to Audio

Out on an external device.

 If the product is in AUX1 mode with no playback and no command input for more than

20 minutes, the system will turn off.

 If the product is in AUX1 mode with playback for more than 8 hours and no command

input, the system will turn off.

󰟾

Power

Connect the power cord to the Power jack and connect the other end of the power cord to

a wall socket to supply electrical power to the Sound Tower.

ENG - 6

03 CONNECTING THE SOUND TOWER

Connecting Electrical Power

Use the power cord to connect the Sound Tower to an electrical outlet in the following order:

Connect the power cord to the Sound Tower and then to a wall socket.

See the illustrations below.

 For more information about the required electrical power and power consumption, refer to the

label attached to the product. (Label: Rear of the Sound Tower)

Connecting

Electrical Power

Rear of Sound Tower

ENG - 7

How to use Audio Group

You can connect multiple audio systems in a group to create a party environment and produce higher

sound output. Set one Sound Tower as the HOST and any music played on it will be shared among any

other Sound Tower systems in the Audio group.

Connecting the wired Group Play mode

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

1st

Sound Tower HOST

2nd

Sound Tower

Last

Sound Tower

Continue the

connection until

the last Sound

Tower

Set up Group Play by connecting all the systems using audio cables (not supplied). Use the AUX or

(Source) button to change the source to AUX2 for every Sound Tower system except the 1st (or HOST)

Sound Tower system.

NOTES

 The 1st Sound Tower HOST can play music from any source.

 Depending on the length or characteristics of the cable, there may be a difference in operating

distance.

ENG - 8

Connecting the wireless Group Play mode

You can connect up to ten Sound Tower systems with the wireless Group Play function.

GROUP PLAY

HOST

SUB 1

SUB 2

󰟳

󰟴 󰟵

1. Press the GROUP PLAY button on the HOST Sound Tower system. The “HOST” message appears

on the display of the HOST Sound Tower and the LED blinks on the GROUP PLAY button.

2. Press the GROUP PLAY button on the 2nd Sound Tower system (SUB 1). The “GROUP PLAY

CONNECTED” message appears on the display and the GROUP PLAY button on both systems

stops blinking.

3. Press the GROUP PLAY button on the 3rd Sound Tower system (SUB 2). The “GROUP PLAY

CONNECTED” message appears on the display and the GROUP PLAY button on the system stops

blinking.

4. If you want to add more Sound Tower systems, repeat step 3.

5. Play music on the HOST Sound Tower. Sound outputs from all the connected systems.

NOTES

 If Sound Tower is connected with Samsung TV, Wireless Group Play is not available.

 The wireless Group Play connection is available for any Sound Tower system.

 Environmental conditions or other factors with connected devices may have effect on playback

quality.

 If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play

connection. Try step 1 to step 5 again.

 The ADD STEREO button and PAIRING button on the SUB Sound Tower systems are not available

while in wireless Group Play mode.

 The ADD STEREO button on the HOST Sound Tower system is not available while in wireless Group

Play mode.

 When adding a SUB unit, if you press and hold GROUP PLAY on the SUB, before the “GROUP PLAY

CONNECTED” message appears, it will become the HOST unit instead.

ENG - 9

 All SUB units must be connected one by one. For example, after HOST is connected, press GROUP

PLAY button on SUB 1 to connect, and after SUB 1 is connected, you should connect SUB 2 and SUB

3 one by one sequentially.

 While using Group Play, currently connected Bluetooth devices are disconnected and Bluetooth

connection is disabled.

 Bluetooth devices can search and connect with the HOST Sound Tower only.

 When in Group Play mode, the SUB cannot connect to a Bluetooth device.

 If you power off and then power on the Sound Tower or select any source other than BT on a SUB

unit, in Group Play mode, the Group Play mode is disconnected.

 This product does not support aptX audio stream with Wireless Group Play mode.

Disconnecting the wireless Group Play mode

1. Press and hold the GROUP PLAY button over 5 seconds (HOST or SUB) after Group Play is

connected or press the GROUP PLAY button (HOST or SUB) before Group Play is connected.

 “OFF-GROUP PLAY” appears on the display and the LED above the GROUP PLAY button is off.

2. If you select any source other than BT on the SUB units or turn off the HOST Sound Tower, the

Group Play mode is disconnected.

 If the disconnection is made from the HOST Sound Tower, Group Play is disconnected.

LED Indications

LED STATE Description

Green

Blink Waiting for a wireless Group Play connection.

Solid The wireless Group Play connection was successful.

Red Solid There is an error with the wireless Group Play connection.

NOTE

 In wireless connection, Playback quality can be unstable depending on Bluetooth environment.

For better play, please keep the device in wired Group Play mode.

ENG - 10

Using a Smartphone and Stereo Group mode

Connect two Sound Tower and use them with your smartphone to enjoy stereo sound.

ADD STEREO

Left Sound Tower

(MAIN)

Right Sound Tower

(SUB)

󰟳 󰟴

1. Press the ADD STEREO button on the left Sound Tower system. The “SEARCHING STEREO”

message appears on the display and the LED blinks on the ADD STEREO button.

2. Press the ADD STEREO button on the right Sound Tower system. The “SEARCHING STEREO”

message appears on the display and the LED blinks on the ADD STEREO button.

3. When the connection is made, The “LEFT” message appears on the MAIN Sound Tower system and

“RIGHT” appears on the SUB Sound Tower system.

 The MAIN Sound Tower system outputs left channel sound and the SUB Sound Tower system

outputs right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower

to change the sound channel of the Sound Tower.

4. Play music by connecting your smartphone to the MAIN Sound Tower and Bluetooth.

Sound is output from both Sound Tower.

NOTES

 To use the Stereo Group mode, both Sound Tower systems must be the same model.

 Environmental conditions or other factors with connected devices may have effect on playback

quality.

 If the red LED is on the ADD STEREO, an error has occured in the Stereo Group connection. Try step

1 and step 3 again.

 Remote Controller, BT PAIRING, GROUP PLAY and (Source) buttons on the SUB Sound Tower

systems are disabled while in Stereo Group mode.

 The GROUP PLAY button on the MAIN Sound Tower system is not available while in Stereo Group

mode.

ENG - 11

 In mode other than “BT” (ex. USB, AUX mode), music is played only in MAIN Sound Tower and music

is not played in SUB Sound Tower.

 The lighting colours between MAIN Sound Tower and SUB Sound Tower may vary.

 The Bluetooth device has the same name as MAIN Sound Tower and SUB Sound Tower when

connected to the Bluetooth device, and only the MAIN Sound Tower can be connected.

 This product does not support aptX audio stream with Stereo Group mode.

 If you try to connect a Bluetooth device while Stereo Group is connecting, the Stereo Group mode

may fail.

Terminate the Stereo Group mode

Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is

connected.

 “OFF-STEREO MODE” appears on the display and the LED above the ADD STEREO button is off.

LED Indications

LED STATE Description

Green

Blink Waiting for a Stereo Group connection.

Solid The Stereo Group connection is successful.

Red Solid There is an error with the Stereo Group connection.

Using Samsung TV and Stereo Group mode

Connect two Sound Tower by wire and use them with Samsung TV to enjoy stereo sound.

Left Sound Tower

(MAIN)

Right Sound Tower

(SUB)

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

1. Refer to “Using a Smartphone and Stereo Group mode” to connect the two Sound Tower in a

Stereo Group.

ENG - 12

2. Connect the RCA cable to the AUX2 OUT on the MAIN and AUX2 IN on the SUB as shown by using

the RCA cable (not supplied).

3. In “BT” mode, press the “AUX” button on the MAIN Sound Tower remote control for at least 5

seconds. “SEARCHING TV STEREO” appears on the display.

4. When the connection is complete, “TV STEREO MODE” appears in the display and then the current

output CHANNEL is displayed.

5. When the connection is complete, a “SEARCHING TV” message appears in the MAIN Sound Tower

display and a “SUB” appears in the SUB Sound Tower display.

 The MAIN Sound Tower outputs the left channel sound and the SUB Sound Tower outputs the

right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower to

change the sound channel of the Sound Tower.

6. Connect a TV and MAIN Sound Tower via Bluetooth to play music. Sound is output from both

Sound Tower.

NOTES

 To use Stereo Group mode, both Sound Tower must be the same model.

 A red light on the LED on the ADD STEREO button indicates an error in the Stereo Group

connection. Try Step 1 to 5 again.

 In Stereo Group mode, the remote control, BT PAIRING, GROUP PLAY, and (Source) buttons on

the SUB Sound Tower are disabled.

 The GROUP PLAY button on the MAIN Sound Tower is not available in Stereo Group mode.

 If Samsung TV supports a simple connection, the connection pop-up is automatically displayed on

the TV, and if you select “Yes”, it connects to the TV. If there is a previous connection history

between Samsung TV and Sound Tower, it will be connected to Samsung TV without pop-up. For a

simple connection to Samsung TV, refer to page 17.

 The lighting colours may vary between the MAIN Sound Tower and the SUB Sound Tower.

 When connecting to a TV, the names of the MAIN and SUB Sound Tower are the same in the

Bluetooth list on the TV, and only the MAIN Sound Tower can be connected.

Terminating the Stereo Group mode connection

Press the ADD STEREO button (MAIN or SUB) for at least 5 seconds after the Stereo Group is

connected.

 “OFF-STEREO MODE” appears in the display and the LED on the ADD STEREO button turns off.

ENG - 13

04 CONNECTING AN EXTERNAL DEVICE

Connect to an external device via a wired or wireless network to play the external device’s sound

through the Sound Tower.

Connecting using an Analogue Audio (AUX) Cable

- AUDIO -

R L

AUX 1

AUX 2 / GROUP PLAY

IN

OUT

L

R

L

R

Mobile device / MP3 / PMP

BD / DVD player / Set-top box / Game console

󰟴

󰟳

3.5 mm stereo cable

(not supplied)

Audio (AUX) Cable (not supplied)

Rear of the Sound Tower

󰟳 3.5 mm stereo Cable (AUX1)

1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using an

3.5 mm stereo cable .

2. Select “AUX1” mode by pressing the (Source) button on the top panel or on the remote control.

 You can also select a source using AUX button on the remote control.

󰟴 Audio Cable (AUX2)

1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device

using an audio cable .

2. Select “AUX2” mode by pressing the (Source) button on the top panel or on the remote

control.

 You can also select a source using AUX button on the remote control.

ENG - 14

Connecting a mobile device via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of

cabling.

Bluetooth device

ADD STEREO GROUP PLAYPAIRING

LIGHT

PAIRING

TEMPO

USB

AUX

EFFECT

DOWN

UP

EFFECT

DJ

SOUND

MODE

OR

The initial connection

1. Press and hold the PAIRING button on the remote control for more than 5 seconds to enter the

“BT PAIRING” mode.

(OR)

Press the PAIRING button on the rear panel.

2. On your device, select “[AV] MX-T50” from the list that appears.

 When the Sound Tower is connected to the Bluetooth device, [Bluetooth Device NameBT”

appears in the front display.

3. 

If the device fails to connect

 If a previously connected Sound Tower listing (e.g. “[AV] MX-T50”) appears in the list, delete it.

 Then repeat steps 1 and 2.

What is the difference between BT READY and BT PAIRING?

 BT READY : In this mode, you can search for previously connected TVs or connect a previously

connected mobile device to the Sound Tower.

 BT PAIRING : In this mode, you can connect a new device to the Sound Tower.

(Press and hold the PAIRING button on the remote control for more than 5 seconds or press the

PAIRING button on the rear of the Sound Tower to enter the “BT PAIRING” mode.)

ENG - 15

Bluetooth Multi connection

Sound Tower supports up-to two simultaneous Bluetooth device connections. Sound Tower can play

music through one of the connected Bluetooth devices without disconnecting the second device.

Bluetooth device 1 Bluetooth device 2

1. 

(See page 14)

2. Music can be played on only one of the two connected devices, and when the music is played on

the other device, the music on the playing device is paused.

NOTES

 If you want to connect Sound Tower to a third device, you can disconnect Sound Tower from one of

the two currently connected devices and then connect Sound Tower to the third device.

 With the Sound Tower and two devices currently connected, when pairing to a new Bluetooth

device, the devices currently connected maybe disconnected.

 You can connect to two Bluetooth devices at the same time.

 If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

 Environmental conditions or other factors with connected devices may have effect on playback

quality.

 The Sound Tower automatically turns off after 20 minutes with no command input in the ready

state.

 The Sound Tower may not perform Bluetooth search or connection correctly under the following

circumstances:

– 

– If several Bluetooth devices are simultaneously paired with the Sound Tower.

– If the Bluetooth device is turned off, not in place, or malfunctions.

 Electronic devices may cause radio interference. Devices that generate electromagnetic waves

must be kept away from the Sound Tower main unit - e.g., microwaves, wireless LAN devices, etc.

 When the Sound Tower is connected to your TV by Bluetooth connection, the video on the TV and

audio from the Sound Tower may not be synchronised because the distance between the Sound

Tower and the TV is too far. It is recommended to move the Sound Tower closer to your TV within

1 meter.

ENG - 16

 When the speaker is in the Bluetooth Multi connection mode, you will need to connect the other

Bluetooth device and speaker within a few minutes (Approx. 1 minute). Otherwise Bluetooth Multi

connection mode will be cancelled.

 Bluetooth Multi connection may not be supported depending on the connected device’s



 Removable/detachable Bluetooth devices (Ex:Dongle etc..) ,windows phone, laptops, TV, etc. do not

support Bluetooth Multi connection.

 After Bluetooth Multi connection pairing, there may be a slight delay before music starts playing

depending on the Bluetooth devices.

 

device, it may take a few minutes to connect other Bluetooth devices. If you turn the Sound Tower

off and back on, you can connect other Bluetooth devices without waiting.

LED Indications

LED STATE Description

Blue

Fast Blink BT PAIRING mode

Blink BT READY mode

Solid A Bluetooth device is connected.

Using Bluetooth Power On

When the Sound Tower is turned off, you can connect your smart device via a Bluetooth connection to

turn it on.

1. Press and hold the BASS button on the remote control or on the top panel to set the Bluetooth

Power On function on. “ON-BLUETOOTH POWER” appears on the display.

2. When the Sound Tower is off, connect your smart device via Bluetooth. (For information on

Bluetooth connections, refer to your smart device’s manual.)

3. When the connection is complete, the Sound Tower turns itself on automatically in Bluetooth

mode.

 Select the desired music to play from your smart device.

NOTE

 Press and hold the BASS button for more than 5 seconds on the remote control or on the top panel to

turn the Bluetooth Power On function on or off.

Each time you press the BASS button, the Sound Tower displays :

ON-BLUETOOTHPOWER→OFF-BLUETOOTHPOWER

La page charge ...

Samsung MX-T50 Manuel utilisateur

Samsung MX-T50 Manuel utilisateur

dans d''autres langues

Documents connexes