Monogram
®
Use and Care Guide
for Side-by-Side
36″, 42″, 48″
Built-In
Refrigerators
www.geappliances.com
Consumer Information
Built - In Refrigerators
2
Introduction
Your new Monogram refrigerator makes an eloquent statement of style, convenience
and kitchen planning flexibility. Whether you chose it for its purity of design, practical
storage arrangements or assiduous attention to detail—or for all of these reasons—you’ll
find that your Monogram refrigerator’s superior blend of form and function will delight
you for years to come.
The Monogram refrigerator was designed to provide the flexibility to blend in with
your kitchen cabinetry. Decorative door insert panels allow it to match your kitchen
cabinets or blend with your kitchen decor. Custom handles are also available to further
personalize your refrigerator. Through a series of product and trim kit choices, the
Monogram refrigerator can be beautifully integrated into the kitchen.
Since this is designed to be a built-in product, custom panels are required on the front
of the Monogram refrigerator. Consult your kitchen designer or cabinetmaker for your
customized look.
The information on the following pages will help you operate and maintain your
refrigerator properly.
If you have any questions, call the GE Answer Center
®
800.626.2000.
In Canada, please call 1.888.880.3030.
Contents
Consumer Services
Important Phone Numbers . . . . . . . . . . . .24
Model and Serial Numbers . . . . . . . . . . . . . .3
Problem Solver . . . . . . . . . . . . . . . . . . . .21–23
Product Registration . . . . . . . . . . . . . . . .3, 26
Safety Instructions . . . . . . . . . . . . . . . . . . . 4–7
Warranty for customers in Canada . . . . . . 27
Warranty for customers
in the USA . . . . . . . . . . . . . . . . . . . Back Cover
Care and Cleaning
Cleaning—Outside and Inside . . . . . . . . . .17
Cleaning—Conmdensor Fins . . . . . . . . . . .18
Light Bulb Replacement . . . . . . . . . . . . . . 19
Moving and Vacation . . . . . . . . . . . . . . . . . .18
Operating Instructions
Automatic Icemaker . . . . . . . . . . . . . . . . . . .10
Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 16
Storage Drawers . . . . . . . . . . . . . . . . . . .13, 14
Temperature Controls . . . . . . . . . . . . . . . .8, 9
Preparation
Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Before
using
your
refrigerator
Read this guide carefully. It is intended to
help you operate and maintain your new
refrigerator properly.
Keep it handy for answers to your
questions.
If you don’t understand something or
need more help, call:
GE Answer Center
®
800.626.2000
24 hours a day, 7 days a week
In Canada, call 1.888.880.3030.
3
If you
received a
damaged
refrigerator
Immediately contact the dealer (or
builder) that sold you the refrigerator.
Save time
& money
Before you request service, check the
Problem Solver in the back of this guide.
It lists causes of minor operating problems
that you can correct yourself.
If you
need
service
To obtain service, see the Consumer
Services page in the back of this guide.
We’re proud of our service and want you to
be pleased. If for some reason you are not
happy with the service you receive, here
are steps to follow for further help.
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
NEXT, if you are still not pleased, write
all the details—including your phone
number—to:
Manager, Consumer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
For customers in Canada:
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
NEXT, if you are still not pleased, write all
the details—including your phone number
to:
Manager, Consumer Relations
Camco Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
Write
down the
model &
serial
numbers
You’ll see them on a label above the
freezer compartment behind the top
panel.
These numbers are also on the Consumer
Product Ownership Registration Card
included with this guide.
Before sending in this card, please write
these numbers here:
Model Number
Serial Number
Use these numbers in any correspondence
or service calls concerning your
refrigerator.
Consumer Information
Built - In Refrigerators
4
IMPORTANT SAFETY INSTRUCTIONS
CFC DISPOSAL
Old refrigeration products have
cooling systems that used CFCs
(chlorofluorocarbons). CFCs are
believed to harm stratospheric ozone.
If you are throwing away an old
refrigeration product, make sure the CFC
refrigerant is removed for proper disposal
by a qualified servicer. If you intentionally
release this CFC refrigerant you can be
subject to fines and imprisonment under
provisions of environmental legislation.
wDANGER: RISK OF CHILD ENTRAPMENT
Child entrapment and suffocation are
not problems of the past. Junked or
abandoned refrigeration products are still
dangerous. . . even if they will sit for “just
a few days.” If you are getting rid of your
old appliance, please follow these
instructions to help prevent accidents.
Before You Throw Away Your Old
Refrigeration Product:
• Take off the doors.
• Leave the shelves in place so that children
may not easily climb inside
.
READ AND SAVE THESE INSTRUCTIONS
w WARNING—When using this
appliance, always exercise basic safety
precautions, including the following:
• Use this appliance only for its intended
purpose as described in this Use and
Care Guide.
• This refrigerator must be properly
installed in accordance with the
Installation Instructions before it is used.
• Do not allow children to climb, stand or
hang on the shelves in the refrigerator.
They could damage the refrigerator and
seriously injure themselves.
• After your refrigerator is in operation, do
not touch the cold surfaces in the freezer
compartment, particularly when hands
are damp or wet. Skin may adhere to
these extremely cold surfaces.
• Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
• If your refrigerator has an automatic
icemaker, avoid contact with the moving
parts of the ejector mechanism, or with
the heating element that releases the
cubes. Do not place fingers or hands on
the automatic icemaking mechanism
while the refrigerator is plugged in.
• Unplug your refrigerator before cleaning
and making repairs. NOTE: We strongly
recommend that any servicing be
performed by a qualified individual.
• Before replacing a burned-out light bulb,
the refrigerator should be unplugged in
order to avoid contact with a live wire
filament. (A burned-out light bulb may
break when being replaced.) NOTE:
Turning control to “0” does not remove
power to the light circuit.
• Do not refreeze frozen foods which have
thawed completely.
wDANGER! RISQUES POUR LES ENFANTS
Les enfants pris au piège ou morts d’asphyxie
sont toujours d’actualité. Les appareils de
réfrigération abandonés sont toujours aussi
dangereux, même si on n’attend que “quelque
jours” pour s’en débarasser. Si vous ne gardez
pas votre ancien appareil, veuillez suivre les
directives ci-dessous afin de prévenir les
accidents.
Avant de vous débarasser de votre vieux
appareil de réfrigération:
• Démontez les portes.
• Laissez les clayettes en place afin d’empêcher
les enfants de grimper à l’intérieur.
SE DÉBARRASSER DU CFC
Les vieux appareils de réfrigération ont un
système de refroidissement qui a utilisé les CFC
(chlorofluorocarbones). Les CFCs sont jugés
nocifs pour l’ozone stratosphérique.
Si vous débarrassez de votre viel appareil de
réfrigération, assurez-vous que le frigorigène
avec CFC soit enlevé correctement par un
technicien qualifié. Si vous libérez
intentionnellement ce frigogène avec CFC vouz
pouvez être soumis aux contraventions et à
l’emprisonnement après les stipulations des
lois sur l’environment.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
LIRE ET CONSERVER CES INSTRUCTIONS
5
w
AVERTISSEMENT : Lorsque vous
utilisez le réfrigérateur, observez
toujours certaines précautions de base,
notamment:
• N’utilisez le réfrigérateur que pour son
usage prévu, comme décrit dans le
présent guide.
• Installez le réfrigérateur conformément
aux directives d’installation avant de
l’utiliser.
• Ne laissez pas les enfants grimper,
s’asseoir, se tenir debout ni se pendre
aux clayettes du réfrigérateur. Ils
pourraient endommager le réfrigérateur
et se blesser gravement.
• Une fois le réfrigérateur en marche, ne
touchez pas les surfaces froides du
congélateur, surtout si vous avez les
mains humides ou mouillées : la peau
risque d’adhérer à ces surfaces très
froides.
• N’entreposez et n’utilisez pas d’essence
ou autres vapeurs et liquides
inflammables à proximité de cet appareil
ou de tout autre appareil
électroménager.
• Si votre réfrigérateur est doté d’une
machine à glaçons automatique, évitez le
contact avec les pièces mobiles du
mécanisme éjecteur, ou avec l’élément
chauffant qui libère les glaçons. Ne
posez pas les doigts ou les mains sur le
mécanisme de la machine à glaçons
pendant que le réfrigérateur est
branché.
• Débranchez votre réfrigérateur avant
de le nettoyer et de le réparer.
REMARQUE : Nous vous
recommandons vivement de confier
toute réparation à un technicien
qualifié.
• Avant de remplacer une ampoule grillée,
le réfrigérateur doit être débranché afin
d’éviter tout contact avec un fil sous
tension. (Une ampoule grillée peut
se briser pendant l’opération).
REMARQUE : Lorsque vous placez
la commande sur «0» (éteint),
l’alimentation électrique de l’ampoule
n’est pas coupée.
• Ne faites PAS recongeler des aliments
surgelés qui ont complètement dégelé.
6
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord. For personal safety, this
appliance must be properly grounded.
The power cord of this appliance is
equipped with a 3-prong (grounding)
plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the
possibility of electric shock hazard from
this appliance.
Have the wall outlet and circuit checked
by a qualified electrician to make sure the
outlet is properly grounded.
Where a standard 2-prong wall outlet
is encountered, it is your personal
responsibility and obligation to have it
replaced with a properly grounded
3-prong wall outlet.
DO NOT USE AN ADAPTER PLUG TO
CONNECT THE REFRIGERATOR TO
A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD
WITH THIS APPLIANCE.
The appliance should always be plugged
into its own individual electrical outlet
which has a voltage rating that matches
the rating plate. This provides the best
performance and also prevents
overloading house wiring circuits
which could cause a fire hazard from
overheated wires.
Never unplug an appliance by pulling
on the power cord. Always grip the
plug firmly and pull straight out from
the outlet.
Repair or replace immediately all power
cords that have become frayed or
otherwise damaged. Do not use a cord
that shows cracks or abrasion damage
along its length or at either end.
When moving the appliance, be careful
not to roll over or damage the power cord.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
7
RACCORDEMENT ÉLECTRIQUE
Ne coupez ni retirez en aucun cas la
troisième broche (mise à la terre) de la
fiche du cordon d’alimentation. Pour
votre sécurité, cet appareil doit être
correctement mis à la terre.
Le cordon d’alimentation de cet appareil
est muni d’une fiche à 3 broches (mise à la
terre) qui se branche dans une prise
mural ordinaire à 3 alvéoles (mise à la
terre) pour réduire au minimum les
risques du chocs électriques.
Faites examiner la prise de courant et le
circuit par un électricien qualifié pour
vous assurer que la prise est correctement
mise à la terre.
Si la prise murale est du type standard
à 2 alvéoles, il vous incombe de la faire
remplacer par une prise à 3 alvéoles
correctement mise à la terre.
La machine à glaçons doit toujours être
branché dans sa propre prise de courant,
dont la tension nominale est identique à
celle indiquée sur la plaque signalétique.
N’UTILISEZ PAS UNE FICHE
D’ADAPTATION POUR RACCORDER
LE RÉFRIGÉRATEUR DANS UNE
PRISE MURALE À 2 ALVÉOLES.
N’UTILISEZ PAS DE CORDONS
PROLONGATEURS AVEC CET
APPAREIL.
Cette précaution est recommandée pour
garantir un rendement optimum et éviter
une surcharge des circuits électriques de
la résidence, ce qui pourrait créer un
risque d’incendie par surschauffe des fils.
Ne débranchez jamais l’appareil en
tirant le cordon d’alimentation.
Saisissez fermement la fiche du cordon
et tirez droit pour la retirer de la prise.
Réparez ou remplacez immédiatement
tout cordon effiloché ou endommagé.
N’utilisez pas un cordon fendillé ou
présentant des signes d’usure.
Lorsque vous déplacez l’appareil du mur,
faites attention de ne pas la faire rouler
sur le cordon d’alimentation afin de ne
pas l’endommager.
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
CONSERVEZ CES DIRECTIVES
8
Operating Instructions
Built - In Refrigerators
Set Temperature
Controls
(appearance
may vary)
Your refrigerator has two controls that let
you regulate the temperature in the fresh
food and freezer compartments.
They have settings from 1 through 9,
and are located at the top of the fresh
food compartment.
The freezer control also has
an OFF setting.
9 is the coldest setting, 1 is the warmest.
WHEN YOU FIRST TURN THE
REFRIGERATOR
ON, SET BOTH
CONTROLS AT 5.
For colder or warmer temperatures,
adjust the desired compartment control
1 number at a time.
IMPORTANT: When first setting
controls, or adjusting them, allow 24
hours for the refrigerator to get cold.
Note: Turning the freezer control to the
OFF position stops cooling in BOTH
compartments—fresh food AND freezer—
but does not shut off power to the
refrigerator.
How to test
temperatures
Use the milk test for the fresh food
compartment. Place a container of milk
on the top shelf in the fresh food
compartment. Check it a day later.
If the milk is too warm or too cold,
adjust the temperature controls.
Use the ice cream test for the freezer
compartment. Place a container of ice
cream in the center of the freezer
compartment. Check it after a day.
If it’s too hard or too soft, adjust the
temperature controls.
Always allow 24 hours for the refrigerator
to reach the temperature you set.
5
FRESH FOOD
5 IS NORMAL
9 IS COLDEST
5
FREEZER
5 IS NORMAL
9 IS COLDEST
Operating Instructions
Built - In Refrigerators
9
Energy saver
switch
The energy saver switch is located on the
temperature control panel.
To reduce the amount of electricity
required to operate your refrigerator,
push switch to ENERGY SAVER setting.
This turns off the heater in your
refrigerator that prevents moisture from
forming on the outside of the refrigerator.
With the heater turned off, there is a
chance that moisture may form on the
outside of your refrigerator, especially
when the weather is humid.
The humidity is most likely to be high in
the summer, in the early morning hours,
and in homes which are not air
conditioned.
Over an extended period of time,
moisture that forms on the refrigerator
surface may cause deterioration of the
paint finish. It will be important to protect
the finish by using appliance polish wax as
described in the Care and Cleaning
section.
Move the energy saver switch from the
ENERGY SAVER setting and electricity
flows through the low wattage heater
which warms the outside of the
refrigerator. Under most conditions, this
prevents the forming of moisture or water
droplets.
No defrosting
It is not necessary to defrost the freezer or
fresh food compartments. Although your
refrigerator is designed and equipped to
defrost itself automatically, some frost on
packages is normal.
Automatic Icemaker (on some models)
Built - In Refrigerators
A newly-installed refrigerator may take 8 to
12 hours to begin making ice.
The icemaker will produce eight cubes
per cycle—approximately 100 cubes in a
24-hour period, depending on freezer
compartment temperature, room
temperature, number of door openings
and other use conditions.
If your refrigerator is operated before
the water connection is made to the
icemaker, keep the feeler arm in the
STOP (up) position.
When the refrigerator has been connected
to the water supply, move the feeler arm
to the ON (down) position.
The ice maker will fill with water when
it cools to freezing. A newly-installed
refrigerator may take 8 to 12 hours to
begin making ice cubes.
Throw away the first few batches of ice.
This flushes away impurities in the
water line.
Icemaking will continue until the feeler
arm senses enough ice cubes in the
storage bin. For maximum ice production,
level the stored cubes with your hand
occasionally. Be sure nothing interferes
with the swing of the feeler arm.
The icemaker ejects cubes in groups of
eight and it is normal for several cubes
to be joined together.
Move the icemaker feeler arm to the STOP
(up) position when:
• home water supply is to be off for several
hours.
• ice storage bin is to be removed for a
period of time.
• going away on vacation, at which time
you should also turn off the valve in the
water supply line to your refrigerator.
• turning the freezer control to the OFF
position.
If ice is not used frequently, old ice cubes
will become cloudy and taste stale. Empty
the ice storage bin periodically and wash
it in lukewarm water. Be sure to allow the
storage bin to dry before replacing it—
otherwise ice cubes may stick to other
parts of the icemaker.
If this is your first icemaker, you’ll hear
occasional sounds that may be unfamiliar.
They are normal icemaking sounds and
are not a cause for concern.
Icemaker
Ice
Storage
Bin
Feeler arm in
STOP (up)
position
Feeler arm
in ON
(down)
position
Automatic
icemaker
(on some
models)
10
Ice & Water Dispenser (on some models)
Built - In Refrigerators
11
To use the
dispenser
Select CUBES, CRUSHED ICE (on some
models) or WATER.
Press the rim of the glass gently against the
dispenser pad.
The spill shelf is not self-draining. To
reduce water spotting, the shelf and its
grille should be cleaned regularly.
If no water is dispensed when the
refrigerator is first installed, there may
be air in the water line system. Press the
dispenser pad for at least two minutes to
remove trapped air from the water line
and to fill the water system. To flush out
impurities in the water line, throw away
the first six glassfuls of water.
Ice storage
bin
To remove:
Lift the left corner to free the bin from
the shelf and pull the bin straight out
while supporting it at front and rear.
To replace:
Slide the bin back until the tab on the bin
locks into the slot on the shelf. If the bin
does not go all the way back, remove it
and rotate the drive mechanism 1/4 turn.
Then push the bin back again.
CAUTION: Never put fingers or
any other objects into the ice crusher
discharge opening.
Spill Shelf
Rotate
Drive
Mechanism
12
Ice & Water Dispenser (on some models)
Built - In Refrigerators
Important
facts about
your ice
& water
dispenser
• Add ice before filling the glass with a
beverage. This will prevent splashing,
which could cause the ice selector switch
to stick or bind.
• Do not add ice from trays or bags to
the storage bin. It may not crush or
dispense well.
• Avoid overfilling glass with ice and use
of narrow or extra-tall glasses. Backed-up
ice can jam the chute or cause the door
in the chute to freeze shut. If ice is
blocking the chute, poke it through with
a wooden spoon.
• Beverages and foods should not be
quick-chilled in the ice storage bin.
Cans, bottles or food packages in the
storage bin may cause the icemaker or
auger to jam.
• Some crushed ice may be dispensed
even though you selected CUBES. This
happens occasionally when a few cubes
accidentally get directed to the crusher.
• After crushed ice is dispensed, some
water may drip from the chute.
• Sometimes a mound of snow will
form on the door in the ice chute.
This condition is normal and usually
occurs when you have dispensed
crushed ice repeatedly. The snow
will eventually evaporate.
• Dispensed water is not ice cold.
For colder water, simply add crushed
ice or cubes before dispensing water.
• The first glass of water dispensed may
be warmer than the following ones.
This is normal.
13
Storage Drawers
Built - In Refrigerators
High
humidity
setting
This refrigerated drawer is designed to
keep unwrapped foods fresh by retaining
the natural moisture content of foods
such as:
As in any refrigerated storage area, it is
recommended that foods with strong
odors be stored wrapped—foods such as:
Storage
drawers
Excess water that may accumulate in the
bottom of the drawers should be emptied
and the drawers wiped dry.
Fruit and
vegetable
drawers
The storage drawers at the bottom of the
fresh food compartment are designed to
provide high humidity levels required by
most vegetables and lower humidity levels
required for most fruits.
When replacing the drawers, always push
them all the way in.
Storage time will depend upon the type of
food and its condition when placed in the
drawers.
• Artichokes
• Asparagus
• Beets, topped
• Blueberries
• Currants
• Carrots
• Celery
• Cherries
• Corn
• Currants
• Greens, leafy
• Lettuce
• Parsley
• Peas, green
• Radishes
• Rhubarb
• Spinach
• Tomatoes, ripe
• Broccoli
• Brussels
sprouts
• Cabbage
• Cauliflower
• Green onions
• Parsnips
• Turnips
Low
humidity
setting
This refrigerated drawer is designed
to provide lower humidity storage for
items such as:
• Apples
• Apricots
• Grapes
• Mushrooms
• Nectarines
• Oranges
• Peaches
• Pears
• Raspberries
• Squash, summer
• Strawberries
• Tangerines
Sealed
snack pan
The Sealed Snack Pan retains high
humidity for the convenient storage of
lunch meats and cheese, hors d’oeuvres,
spreads and snacks.
14
Storage Drawers
Built - In Refrigerators
Drawer
removal
Drawers at the bottom of the fresh food
compartment will stop before coming all
the way out of the refrigerator, to help
prevent contents from spilling onto floor.
To remove a drawer, pull the drawer out.
Lift the front of the drawer up and out of
the wire holder. Lift the back of the drawer
up and out.
To remove the drawers when the
refrigerator door cannot be opened fully,
the shelf above the drawers must be
removed. Push the shelf back then lift up.
Tilt the cover and take it out.
To replace a drawer, place the back of the
drawer in the wire holder, making sure the
extensions of the side of the drawer fit into
the back of the wire holder. Lower the
front of the drawer into the wire holder.
Press firmly on the top of the drawer.
15
Shelves
Built - In Refrigerators
How to
rearrange
your shelves
Tempered glass shelves in the fresh food
compartment and steel wire shelves in
the freezer compartment are adjustable,
enabling you to make efficient shelf
arrangements to fit your family’s food
storage needs.
To remove shelves:
Tilt shelf up at front, then lift it up and
out of tracks on rear wall of refrigerator.
To replace shelves:
Select desired shelf height. With shelf
front raised slightly, engage top lugs in
tracks at rear of cabinet. Then lower front
of shelf until it locks into position.
Quick space
shelf
This shelf splits in half and slides under
itself for storage of tall items on the shelf
below.
Removable
wine rack
(on some
models)
The wine rack is designed to hold a bottle
on its side. A good location for the wine
rack is the Quick Space Shelf.
Some door shelves are adjustable and
can be moved up and down to meet
your storage needs.
To remove: Lift the shelf up and slide it
towards you.
The divider (on some models) helps
prevent tipping, spilling or sliding of small
items stored on the door shelf.
Place index finger and middle finger on
either side of the divider near the front
and simply move it back and forth to fit
your needs.
Divider
Door
shelves
Shelves
Built - In Refrigerators
16
Deep door
shelf
This shelf has only one position on
the door.
To remove: Lift the shelf up and slide it
towards you.
Quick shelf
This swing-down shelf provides extra shelf
space when needed.
When you want to use it, pull the shelf
forward as far as it goes, then lower it.
Be careful not to force it down before
it is pulled out all the way.
To raise it back into position, pull the shelf
forward, push it up and slide it back fully
until it stops.
Freezer
Baskets
Wire slide-out freezer baskets can be
pulled out for easy access to frozen foods.
To remove: Pull shelf out. Lift the front of
the basket up and then take it out.
Care and Cleaning
Built - In Refrigerators
17
Cleaning
outside
The water and ice
dispenser spill shelf
should be wiped dry
immediately to prevent
spotting. The grille is
easily removed by
pressing on the back right corner. Water
left on the shelf may leave deposits that you
can remove by soaking in undiluted
vinegar. You can also use a paste of non-
precipitating water softener (such as
Calgon brand) and water, or 1 teaspoon of
citric acid powder per pint of hot tap water.
Soak until the deposit disappears or
becomes loose enough to rinse away.
Usually 30 minutes soaking time is
adequate. Avoid using wax on the spill shelf
and trim.
The door handles and trim can be cleaned
with a cloth dampened with a solution of
mild liquid dishwashing detergent and
water. Dry with a soft cloth. Don’t use wax
on the door handles or trim.
The stainless steel panels and door handles
(on some models) can be cleaned with a
commercially available stainless steel
cleaner using a clean, soft cloth.
Do not use appliance wax or polish on the
stainless steel.
Cleaning
inside
Inside the fresh food and freezer
compartments should be cleaned at least
once a year. Unplug the refrigerator
before cleaning. If this is not practical,
wring excess moisture out of sponge or
cloth when cleaning around switches,
lights or controls.
Use warm water and baking soda solution—
about a tablespoon of baking soda to a
quart of water. This both cleans and
neutralizes odors. Rinse thoroughly with
water and wipe dry.
Other parts of the refrigerator—including
door gaskets, meat and vegetable drawers,
ice storage bin and all plastic parts—can be
cleaned the same way. After cleaning door
gaskets, apply a thin layer of petroleum
jelly to the door gaskets at the hinge side.
This helps keep the gaskets from sticking
and bending out of shape. Do not use
cleansing powders or other abrasive
cleaners.
Avoid cleaning cold glass shelves with hot
water because the extreme temperature
difference may cause them to break.
To help prevent odors, leave
an open box of baking soda in
the rear of the refrigerator, on
the top shelf. Change the box
every 3 months. An open box
of baking soda in the freezer
will absorb stale freezer odors.
Do not wash any plastic parts from your
refrigerator in your automatic dishwasher.
Press here to
remove grille
Care and Cleaning
Built - In Refrigerators
18
Preparing
for vacation
For extended vacations or absences,
remove food and shut off power to the
refrigerator at the fuse box or circuit
breaker. Clean the interior with a baking
soda solution of 1 tablespoon of soda to
1 quart of water. Wipe dry. To prevent
odors, leave an open box of soda in the
refrigerator. Leave doors open.
For shorter vacations, remove perishable
foods and leave controls at regular settings.
However, if the room temperature is
expected to drop below 60°F., follow the
same instructions as for extended
vacations.
Move the icemaker feeler arm to the STOP
(up) position and be sure to shut off the
water supply to the refrigerator.
Preparing
to move
Secure all loose items such as grille,
shelves and drawers by taping them
securely in place to prevent damage.
Be sure the refrigerator stays in an upright
position during moving.
To clean the condenser fins:
First turn off the power at the circuit
breaker or fuse box. Wait about 30 minutes
for the condenser area to cool. Then
remove the decorative panel by lifting up
and toward you.
Use a soft bristle brush to loosen dust and
lint on the condenser fins. Use a vacuum
hose to remove soil.
After cleaning: Reconnect power at the
fuse box or circuit breaker.
Replace the decorative panel.
Decorative panel
Condenser fins
Plug
Condenser fins
Cleaning the
condensor
fins
To replace a bulb:
1. Turn off power at the circuit breaker or
fuse box.
2. Remove the freezer light shield by
pulling the front edge down and free
and then pull it toward you.
3. Replace with the same size bulb,
reinstall the shield, and turn the
power on.
To replace the freezer shield, set the back
edge on the rear tabs and then push up in
the front until it rests in place.
You may bend the shield slightly to help in
removal and replacement.
19
Light bulb
replacement in
the fresh food
compartment
There are upper and lower light bulbs in
the fresh food compartment.
To replace a bulb:
1. Turn off power at the circuit breaker or
fuse box.
2. Remove the light shield from the top
fresh food light by pushing the front end
up and pulling it toward you to release it
from the rear retaining lip. (It may bend
slightly.)
To change the bottom refrigerator light,
pull out the top drawer, look to the rear of
the fresh food compartment and replace
bulb as needed.
3. Replace with the same size bulb,
reinstall the shield for the upper fresh
food light, and turn the power on.
To reinstall the upper fresh food shield,
hook the front edge first, then push it up
and back until the shield rests in place.
Care and Cleaning
Built - In Refrigerators
Light bulb
replacement in
the freezer
compartment
Installation
Built - In Refrigerators
Leveling
This model has 4-point leveling. All 4
corners are supported by leveling legs.
The front wheels are non-adjustable; they
are only used for positioning the unit.
• To level the back of the unit, turn hex
nut located above the front wheels.
• To level the front of the unit,
use a 1
1
⁄
4
″ open end wrench and
adjust the leveling legs.
• Turn hex nut or front leveling
leg clockwise to raise the unit,
counter-clockwise to lower
the unit.
See the Installation Instructions
(Pub. No. 49-6473—36), (Pub. No. 49-
6462—42), (Pub. No. 49-6457—48) for
complete directions.
Refrigerator
location
Do not install refrigerator where
temperature will be below 60°F (16°C)
because it will not run often enough to
maintain proper temperatures.
Do install it on a floor strong enough to
support a fully loaded refrigerator.
Clearances
If the refrigerator is to be installed in a
corner, allow 2″ between the hinges of the
refrigerator and the wall to ensure a 90°
door opening capability.
No other clearances at top, sides, or back
are required.
20
Hex nut
Wheel
Leveling leg
INSTALLATION REQUIREMENTS
IMPORTANT…Please Read Carefully.
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
dans d''autres langues
- English: GE 36? User manual
Documents connexes
-
GE TBI18JIBWW Mode d'emploi
-
-
-
GE GSH25UFRBB Le manuel du propriétaire
-
-
-
-
-
-
GE Monogram Refrigerator Bottom-Freezer Built-In Refrigerators Manuel utilisateur
Autres documents
-
Brandt UN2597E1 Le manuel du propriétaire
-
GE Monogram Refrigerator Side-by-Side Built-In Refrigerators Manuel utilisateur
-
GE Monogram Refrigerator Built-In Refrigerators Manuel utilisateur
-
Monogram ZISS420DKSS Guide d'installation
-
Smeg SRA416TP2 Manuel utilisateur
-
LivinBox Storage Products Co. 22 Manuel utilisateur
