Samsung LN22D450G1F Manuel utilisateur

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model Serial No.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de

atención al cliente de SAMSUNG.

Country Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc.,

Service à la Clientèle 55 Standish Court

Mississauga, Ontario L5R 4B2 Canada

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com

Samsung Electronics America, Inc.

85 Challenger Road

Ridgefield Park, NJ 07660-2112

BN68-03317B

BN68-03317B-00

[LD450-ZC]BN68-03317B.indb 1 2011-01-10 �� 12:40:58

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-

motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model

offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on

nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer

graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in the LCD picture. To avoid this, vary the

programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LCD models that offer picture

sizing features, use these controls to view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection and use, as well as

burned-in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide

Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products

purchased in the United States, for the warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original

Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and

from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or

workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times,

exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock

or news bars at screen bottom etc.) on the screen. Constant displaying of still pictures can cause ghosting of LCD screen, which will affect image

quality. To reduce risk of this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image on full screen, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout

process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

4inches

[LD450-ZC]BN68-03317B.indb 2 2011-01-10 �� 12:40:58

3

Contents

English

ENGLISH

Getting Started

y List of Features ......................................................... 4

y Accessories .............................................................. 4

y Installing the LCD TV Stand ...................................... 4

y Viewing the Control Panel ......................................... 5

y Viewing the Remote Control ...................................... 6

y Connecting to an Antenna ........................................ 7

y Plug & Play (Initial Setup) ........................................... 7

Connections

y Connecting to an AV Device ...................................... 8

y Connecting to an Audio Device ................................. 9

y Connecting to a PC .................................................. 9

y Changing the Input source ...................................... 11

Basic Features

y How to Navigate Menus .......................................... 12

y Channel Menu ........................................................ 12

Seeing Channels 12

Using Favorite Channels 13

Memorizing channels 13

Editing channels 13

Other Features 13

y Picture Menu .......................................................... 14

Changing the Preset Picture Mode 14

Adjusting picture settings 14

Setting up the TV with your PC 15

Changing the Picture Options 15

y Sound Menu ........................................................... 17

Changing the Preset Sound Mode 17

Adjusting sound settings 17

Sound Settings 17

y Setup Menu ............................................................ 18

Setting the Time 18

Using the Sleep Timer 18

Setting the On/Off Timer 18

Locking Programs 19

Other Features 20

y Support Menu ......................................................... 21

Advanced Features

y Media Play .............................................................. 22

Connecting a USB Device 22

y Anynet+ ................................................................. 26

Setting Up Anynet+ 27

Switching between Anynet+ Devices 27

Recording 27

Listening through a Receiver 28

Troubleshooting for Anynet+ 28

Other Information

y Installing the Wall Mount ......................................... 29

y Securing the TV to the Wall ..................................... 30

y Anti-Theft Kensington Lock ..................................... 30

y Troubleshooting ...................................................... 31

Storage and Maintenance 33

y Speciﬁcations ......................................................... 34

License 34

y Dimensions ............................................................. 35

y Index ...................................................................... 36

Check the Symbol!

t

✎

O

This function can be used by pressing the

TOOLS button on the remote control.

Note :

Important information

Step by step guide :

Informs you how to access

the menu.

[LD450-ZC]BN68-03317B.indb 3 2011-01-10 �� 12:40:59

4

Getting Started

English

Getting Started

List of Features

■ Excellent Digital Interface & Networking : With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed

without a cable box / STB (Set-Top-Box) satellite receiver.

■ Media Play: Allows you to play music ﬁles, and pictures saved on a USB device. (P. 22)

■ Self Diagnosis: You can check picture and sound operation. (P. 21)

Accessories

✎

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

■ Remote Control (BN59-00997A) & Batteries (AAA x 2)

■ Warranty Card / Safety Guide / Quick Setup Guide

■ Owner’s Instructions

■ Cleaning Cloth (BN63-01798B)

■ Power Cord

Input Cables (Sold Separately)

To purchase RS232 cable, contact www.SamsungParts.com.

RS232 (AA39-00311A) Audio

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

Installing the LCD TV Stand

Components

When installing the stand, use the provided components and parts.

A

1 EA

B

3EA (M4 X L16)

y Stand y Screws

1

A

[LD450-ZC]BN68-03317B.indb 4 2011-01-10 �� 12:41:05

5

01 Getting Started

English

✎

Make sure to distinguish between the front and back of each component when assembling them.

✎

Make sure that at least two people lift and move the TV.

✎

Stand the product up and fasten the screws. If you fasten the screws with the TV placed down, it may lean to one side.

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

Speakers

Control Panel

P (Power)

Press to turn the TV on and off.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCEE

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTERE button on the remote control.

MENU Displays an on-screen menu of your TV’s features.

y

Adjusts the volume. In the on-screen menu, use the y buttons as you would

use the ◄ and ► buttons on the remote control.

z

Changes the channels. In the on-screen menu, use the z buttons as you

would use the ▼ and ▲ buttons on the remote control.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

2

B

3EA

[LD450-ZC]BN68-03317B.indb 5 2011-01-10 �� 12:41:07

6

Getting Started

English

Viewing the Remote Control

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from TV.

x

Bright light may affect the performance of the remote control.

Avoid use when nearby fluorescent lights or neon signs.

x

The Color and shape may vary depending on the model.

MTS

MEDIA.P

A B C D

P.SIZE CC

SLEEP

Press to select additional channels

(digital) being broadcast by the same

station. For example, to select channel

‘54-3’, press ‘54’, then press ‘-’ and ‘3’.

Return to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Display and select the available video

sources. (P. 11)

MTS: Press to choose stereo, mono or

Separate Audio Program (SAP

broadcast). (P. 17)

P.SIZE: Choose the picture size. (P. 16)

CC: Controls the caption decoder. (P. 20)

Cut off the sound temporarily.

Automatically shuts off the TV at a preset

time. (P. 18)

Displays the channel list on the screen. (P. 12)

Press to display information on the TV

screen. (P. 18)

Quickly select frequently used functions.

Select on-screen menu items and

change menu values.

Exit the menu.

Return to the previous menu.

View the Media Play. (P. 22)

Buttons used in the Channel List,

Media Play menu, etc.

Change channels.

Displays the main on-screen menu.

Adjusts the volume.

[LD450-ZC]BN68-03317B.indb 6 2011-01-10 �� 12:41:08

7

Plug & Play

Language : English

Time

Game Mode : Off

V-Chip

Caption

Melody : Medium

Setup

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER

P

button. Plug & Play is available only when the Input source is set to TV.

1

Selecting a language

Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the desired OSD (On Screen Display) language.

2

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER

E

button.

y Select the Home Use mode. Store Demo Mode is for retail

environments.

y To return the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the

volume in the OSD, press and hold MENU for 5 sec.

3

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER

E

button. Select Air, Cable or Auto.

✎

In Cable mode, you can select the correct signal source among STD, HRC, and IRC

by pressing the ▲, ▼, ◄ or ► button, then press the ENTER

E

button.

4

Selecting a channel The channel search will start automatically.

For more information, refer to Channel → Auto Program. (P. 13)

✎

Press the ENTER

E

button at any time to interrupt the memorization process.

5

Setting the Clock

Mode

Set the Clock Mode automatically or manually.

✎

If you select the Auto, set the daylight saving time.

Select the time zone where you live.

6

Viewing the HD

Connection Guide

The connection method for the best HD screen quality is displayed.

7

Enjoy your TV.

Press the ENTER

E

button.

If You Want to Reset This Feature...

O

MENU

m

→ Setup → Plug & Play → ENTER

E

or

Cable

R-AUDIO-L

P

R PB Y

ANT OUT

VHF/UHF Antenna

Power Input

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

[LD450-ZC]BN68-03317B.indb 7 2011-01-10 �� 12:41:09

8

Connecting to an AV Device

Using an HDMI cable or HDMI to DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

✎

HDMI/DVI IN / PC/DVI AUDIO IN

x

When using an HDMI/DVI cable connection, you must use the HDMI/DVI IN jack for video. A DVD, Blu-ray

player, HD cable box, HD STB satellite receiver, cable box, or STB satellite receiver may require a DVI-HDMI (DVI

to HDMI) cable or DVI-HDMI (DVI to HDMI) adapter. The PC/DVI AUDIO IN jack is required for audio.

x

The picture may not display normally (if at all) or the audio may not work if an external device that uses an older

version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external

device about the HDMI version and, if out of date, request an upgrade.

x

Be sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display or a connection error may

occur.

Using a Component Cable: (up to 1080p), Using an Audio/Video Cable: (480i only)

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

Device

R-AUDIO-L

P

R PB Y

DVI OUT

BD/DVD player/

HD cable/sat box

R-AUDIO-L

P

R PB Y

HDMI OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

W

R

R-AUDIO-L

P

R PB Y

COMPONENT OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

Blu-ray player

WY

W Y

B

G

R

W

B

G

R

R-AUDIO-L

P

R PB Y

VIDEO OUT

VCR

R-AUDIO-L

P

R PB Y

AUDIO OUT

✎

When connecting to AV IN, the color of

the AV IN [Y/VIDEO] jack (Green) does not

match the color of the video cable (Yellow).

✎

For better picture quality, the Component

connection is recommended over the A/V

connection.

Red White

W W

B

G

R

W

Y

W W

B

G

RR

W

Y

Yellow Red White Red Blue Green

English

ConnectionsConnections

[LD450-ZC]BN68-03317B.indb 8 2011-01-10 �� 12:41:11

9

R-AUDIO-L

P

R PB Y

OPTICAL

Digital Audio

System

Headphones

English

02 Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, Home Theater

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is

a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is

connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to

hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite

receiver directly to an amplifier or home theater.

✎

Headphones H

Headphones may be connected to the headphones output on your set. While the headphones are connected, the

sound from the built-in speakers will be disabled.

x

The available sound function can be restricted when connecting headphones to the TV.

x

The headphone volume and TV volume are adjusted separately.

Connecting to a PC

Using an HDMI cable or HDMI to DVI Cable / a D-sub Cable

✎

Connecting through the HDMI cable may not be supported depending on the PC.

R-AUDIO-L

P

R PB Y

AUDIO OUT

R-AUDIO-L

P

R PB Y

AUDIO OUT

R-AUDIO-L

P

R PB Y

DVI OUT

R-AUDIO-L

P

R PB Y

PC OUT

R-AUDIO-L

P

R PB Y

HDMI OUT

[LD450-ZC]BN68-03317B.indb 9 2011-01-10 �� 12:41:14

10

English

Connections

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1360x768@60Hz.

Mode Resolution

Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

640 x 350 31.469 70.086 25.175 + / -

720 x 400 31.469 70.087 28.322 - / +

MAC

640 x 480 35.000 66.667 30.240 - / -

832 x 624 49.726 74.551 57.284 - / -

VESA DMT

640 x 480

31.469 59.940 25.175 - / -

37.861 72.809 31.500 - / -

37.500 75.000 31.500 - / -

800 x 600

37.879 60.317 40.000 + / +

48.077 72.188 50.000 + / +

46.875 75.000 49.500 + / +

1024 x 768

48.363 60.004 65.000 - / -

56.476 70.069 75.000 - / -

60.023 75.029 78.750 + / +

1360 x 768 47.712 60.015 85.500 + / +

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 x 1080@60Hz.

Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V)

IBM

640 x 350 31.469 70.086 25.175 +/-

720 x 400 31.469 70.087 28.322 -/+

MAC

640 x 480 35.000 66.667 30.240 -/-

832 x 624 49.726 74.551 57.284 -/-

1152 x 870 68.681 75.062 100.000 -/-

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

640 x 480 37.861 72.809 31.500 -/-

640 x 480 37.500 75.000 31.500 -/-

800 x 600 37.879 60.317 40.000 +/+

800 x 600 48.077 72.188 50.000 +/+

800 x 600 46.875 75.000 49.500 +/+

1024 x 768 48.363 60.004 65.000 -/-

1024 x 768 56.476 70.069 75.000 -/-

1024 x 768 60.023 75.029 78.750 +/+

1152 x 864 67.500 75.000 108.000 +/+

1280 x 1024 63.981 60.020 108.000 +/+

1280 x 1024 79.976 75.025 135.000 +/+

1280 x 800 49.702 59.810 83.500 -/+

1280 x 800 62.795 74.934 106.500 -/+

1280 x 960 60.000 60.000 108.000 +/+

1360 x 768 47.712 60.015 85.500 +/+

1440 x 900 55.935 59.887 106.500 -/+

1440 x 900 70.635 74.984 136.750 -/+

1680 x 1050 65.290 59.954 146.250 -/+

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

[LD450-ZC]BN68-03317B.indb 10 2011-01-10 �� 12:41:14

11

English

02 Connections

Changing the Input source

Source List

O

MENU

m

→ Input → Source List → ENTER

E

Use to select TV or an external input sources

such as a DVD / Blu-ray player / cable box /

STB satellite receiver.

■ TV / AV / Component / PC / HDMI/DVI

✎

You can only choose external

devices that are connected to the

TV. In the Source List, connected

inputs will be highlighted.

✎

PC always stay activated.

Edit Name

O

MENU

m

→ Input → Edit Name → ENTER

E

■ VCR / DVD / Cable STB / Satellite STB / PVR STB

/ AV Receiver / Game / Camcorder / PC / DVI PC /

DVI / TV / IPTV / Blu-ray / HD DVD / DMA: Name the

device connected to the input jacks to make your input

source selection easier.

✎

When connecting a PC to the HDMI/DVI IN port with

HDMI cable, you should set the TV to PC mode under

Edit Name.

✎

When connecting a PC to the HDMI/DVI IN port with

HDMI to DVI cable, you should set the TV to DVI PC

mode under Edit Name.

✎

When connecting an AV devices to the HDMI/DVI IN

port with HDMI to DVI cable, you should set the TV to

DVI mode under Edit Name.

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

✎✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI/DVI IN jack.

x

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

EX-LINK

Connector for service only.

Basic Features

[LD450-ZC]BN68-03317B.indb 11 2011-01-10 �� 12:41:15

12

English

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu.

2 ENTER

E

/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU

m

The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon with the ▲ or ▼

button.

3

ENTER

E

Press ENTER

E

to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER

E

Press ENTER

E

to conﬁrm the

selection.

7

EXIT

e

Press EXIT.

Channel Menu

¦ Seeing Channels

Channel List

O

MENU

m

→ Channel → Channel List → ENTER

E

Add, delete or set Favorite channels and use

the program guide for digital broadcasts.

Select a channel in the All Channels, Added

Channels, Favorite or Programmed

screen by pressing the ▲ / ▼ buttons, and

pressing the ENTER

E

button. Then you

can watch the selected channel.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air

B

Zoom

C

Select T Tools ► Next Program

■ All Channels: Shows all currently available

channels.

■ Added Channels: Shows all added channels.

■

*

Favorite: Shows all favorite channels.

■ Programmed: Shows all currently reserved

programs.

✎

Using the color buttons with the Channel List

x

A B C D

Green (Zoom): Enlarges or shrinks a channel

number.

x

A B C D

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The

c

mark appears to the left of the selected channels.

x

T

(Tools): Displays the Channel List option menu.

(The Options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Operations

c

A channel selected.

*

A channel set as a Favorite.

)

A reserved program.

(

A program currently being broadcast.

MEDIA

.

P

S

LEE

P

1

3

4

2

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

[LD450-ZC]BN68-03317B.indb 12 2011-01-10 �� 12:41:15

13

English

03 Basic Features

¦ Using Favorite Channels

O

MENU

m

→ Channel → Channel List → ENTER

E

*

Add to Favorite / Delete from Favorite

t

Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel using the Add to Favorite or

Delete from Favorite menu respectively.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air

B

Zoom

C

Select T Tools ► Next Program

Delete

Add to Favorite

Timer Viewing

Select All

Auto Program

¦ Memorizing channels

O

MENU

m

→ Channel → ENTER

E

Antenna (Air / Cable)

t

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

■ Air: Air antenna signal.

■ Cable: Cable antenna signal.

■ Auto: Air and Cable antenna.

✎

NOTE

x

When selecting the Cable TV system: Selects the

cable system. STD, HRC and IRC identify various

types of cable TV systems. Contact your local cable

company to identify the type of cable system that

exists in your particular area. At this point, the signal

source has been selected.

x

After all the available channels are stored, it starts

to remove scrambled channels. The Auto program

menu then reappears.

How to Stop Auto Programming

1. Press the ENTER

E

button.

2. A message will ask Stop Auto Program? Select Yes by

pressing the ◄ or ► button.

3. Press the ENTER

E

button.

¦ Editing channels

O

MENU

m

→ Channel → Channel List → ENTER

E

Channel Name Edit

t

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

■ Channel Name Edit (analog channels only): Assign your

own channel name.

¦ Other Features

O

MENU

m

→ Channel → ENTER

E

Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER

E

button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER

E

button.

✎

This function is only available in Cable mode.

Channel List

O

MENU

m

→ Channel → Channel List → ENTER

E

Channel List Option Menu

t

Set each channel using the Channel List menu options (Add/

Delete, Timer Viewing, Select All/ Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

[LD450-ZC]BN68-03317B.indb 13 2011-01-10 �� 12:41:16

14

English

Basic Features

■ Add / Delete: Delete or add a channel to display the

channels you want.

✎

NOTE

x

All deleted channels will be shown on the All

Channels menu.

x

A gray-colored channel indicates the channel

has been deleted.

x

The Add menu only appears for deleted

channels.

x

Delete a channel from the Added Channels or

Favorite menu in the same manner.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the set time; even when you

are watching another channel. Set the current time ﬁrst

to use this function. (P. 18)

1. Press the ◄ / ► /▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select Timer Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote for

entering the date and time.

✎

If you selected Once, Every Week or Every Day

in Repeat, you can enter the date you want.

4.

Press the ENTERE button when done.

✎

NOTE

x

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

Programmed menu.

x

When a digital channel is selected, press the ►

button to view the digital program.

■ Select All: Select all the channels in the channel list.

■ Deselect All: Deselect all the selected channels.

✎

You can only select Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to

watch.

1. Press the

ENTERE

button to select Channel List.

2. Press the ◄ and ▼ button move to the Programmed

menu.

■ Change Info: Change a show you have reserved to

watch.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

Information.)

■ Select All / Deselect All: You can select or deselect all

channels in the channel list.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually.

y Select Fine Tune in the Channel menu.

✎

Fine tuned channels that have been saved are marked

with an asterisk “

*

” on the right-hand side of the

channel number in the channel banner.

✎

To reset the fine-tuning, select Reset.

Picture Menu

¦ Changing the Preset Picture Mode

O

MENU

m

→ Picture → Mode → ENTER

E

Mode

Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal environment.

■ Movie: Suitable for watching movies in a dark room.

¦ Adjusting picture settings

O

MENU

m

→ Picture → ENTER

E

Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

x

When you make changes to Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R), the

OSD will be adjusted accordingly.

x

In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

x

Lowering picture brightness reduces power

consumption.

[LD450-ZC]BN68-03317B.indb 14 2011-01-10 �� 12:41:16

15

English

03 Basic Features

¦ Setting up the TV with your PC

Set the input source to PC.

Auto Adjustment

t

O

MENU

m

→Picture → Auto Adjustment →

ENTER

E

Adjust frequency values/positions and ﬁne tune the settings

automatically.

✎

Not available when connecting through HDMI/DVI

cable.

Screen

■ Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the center of screen.

■ PC Position: Adjust the PC’s screen positioning if it

does not ﬁt the TV screen. Press the ▲ or ▼ button to

adjust the Vertical-Position. Press the ◄ or ► button to

adjust the Horizontal-Position.

■ Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC will probably look different, but

the same basic set-up information will apply in most cases.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

y The correct size setting (resolution) [Optimum: 1360x768

pixels]

y If a vertical-frequency option exists on your display

settings dialog box, the correct value is ‘60’ or ‘60 Hz’.

Otherwise, just click ‘OK’ and exit the dialog box.

¦ Changing the Picture Options

Advanced Settings

O

MENU

m

→ Picture → Advanced Settings →

ENTER

E

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a

more precise picture.

✎

In PC mode, you can only make changes to Gamma

and White Balance.

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High):

Adjust the screen contrast.

■ Gamma: Adjust the primary color intensity.

■ Color Space (Auto / Native): Adjust the range of colors

available to create the image.

■ White Balance: Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness.

Reset: Resets the White Balance to it's default

settings.

■ Flesh Tone: Emphasize pink "flesh tone".

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Gamma : 0

Color Space : Native

White Balance

Flesh Tone : 0

Edge Enhancement : On

U Move E Enter R Return

[LD450-ZC]BN68-03317B.indb 15 2011-01-10 �� 12:41:16

16

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

U Move E Enter R Return

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

English

Basic Features

Picture Options

O

MENU

m

→ Picture → Picture Options →

ENTER

E

✎

In PC mode, you can only make changes to the Color

Tone and Size.

■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the

picture mode is Dynamic.

✎

Settings can be adjusted and stored for each

external device connected to an input on the TV.

■ Size: Your cable box/satellite receiver

may have its own set of screen sizes as

well. However, we highly recommend

you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide

mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the picture to ﬁt

the entire screen.

4:3: Sets the picture to basic (4:3) mode.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and center

of the screen may cause image retention (screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are input.

✎

NOTE

x

After selecting Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER

E

button.

5. Press the ► button to select Reset.

6. Press the ENTER

E

button to reset the picture

to its default position.

x

After selecting Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to

center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER

E

button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER

E

button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER

E

button.

x

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720)

x

Settings can be adjusted and stored for each

external device you have connected to an input on

the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

PC 16:9, 4:3

■ Digital Noise Filter (Off / Low / Medium / High /

Auto): If the broadcast signal received by your TV is

weak, you can activate the Digital Noise Filter feature

to reduce any static and ghosting that may appear on

the screen.

✎

When the signal is weak, try other options until the

best picture is displayed.

■ HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■ Film Mode (Off / Auto): Sets the TV to automatically

sense and process ﬁlm signals from all sources and

adjusts the picture for optimum quality.

✎

Available in ATV, DTV(interlace), AV, COMPONENT

(480i / 1080i) and HDMI (480i / 1080i).

Picture Reset

(Reset Picture Mode / Cancel)

Resets your current picture mode to it's default settings.

■ Reset Picture Mode: Returns all picture values in the

currently selected mode to the default settings.

[LD450-ZC]BN68-03317B.indb 16 2011-01-10 �� 12:41:16

17

English

03 Basic Features

Sound Menu

¦ Changing the Preset Sound Mode

O

MENU

m

→ Sound → Mode → ENTER

E

Mode

■ Standard: Selects the normal sound mode.

■ Music: Emphasizes music over voices.

■ Movie: Provides the best sound for movies.

■ Clear Voice: Emphasizes voices over other sounds.

■ Custom: Recalls your customized sound settings.

¦ Adjusting sound settings

O

MENU

m

→ Sound → Equalizer → ENTER

E

Equalizer

Adjusts the sound mode.

■ Mode: Selects the sound mode among the predeﬁned

settings.

■ Balance L/R: Adjusts the balance between the right and

left speaker.

■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth

Adjustment): Adjusts the level of speciﬁc bandwidth

frequencies.

■ Reset: Resets the equalizer to its default settings.

¦ Sound Settings

O

MENU

m

→ Sound → ENTER

E

SRS TruSurround HD (Off / On)

SRS TruSurround HD is a patented SRS technology that

solves the problem of playing 5.1 multichannel content

over two speakers. TruSurround delivers a compelling,

virtual surround sound experience through any two-speaker

playback system, including internal television speakers. It is

fully compatible with all multichannel formats.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of

simultaneous transmission of many

audio tracks (for example, simultaneous

translations of the program into foreign

languages).

✎

You can only select a language among the ones being

broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■ Mono: Choose for channels that are

broadcasting in mono or if you are

having difﬁculty receiving a stereo signal.

■ Stereo: Choose for channels that are

broadcasting in stereo.

■ SAP: Choose to listen to the Separate Audio Program,

which is usually a foreign-language translation.

✎

Depending on the particular program being broadcast,

you can listen to Mono, Stereo or SAP.

Auto Volume (Off / On)

Because each broadcasting station has its own signal

conditions, the volume may ﬂuctuate each time channel

is changed. This feature lets you automatically adjust the

volume of the desired channel by lowering the sound output

when the modulation signal is high or by raising the sound

output when the modulation signal is low.

Speaker Select

(External Speaker / TV Speaker)

A sound echo may occur due to a difference in decoding

speed between the main speaker and the audio receiver. In

this case, set the TV to External Speaker.

✎

When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the

sound settings will be limited.

✎

When Speaker Select is set to External Speaker, you

should use these settings.

x

TV speaker: Off, External speaker: On

✎

When Speaker Select is set to TV Speaker, you

should use these settings.

x

TV speaker: On, External speaker: On

✎

If there is no video signal, both speakers will be mute.

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

[LD450-ZC]BN68-03317B.indb 17 2011-01-10 �� 12:41:17

18

English

Basic Features

Sound Reset (Reset All / Reset Sound

Mode / Cancel)

■ Reset All: Resets all sound settings to the factory

defaults.

■ Reset Sound Mode: Returns all sound values in the

currently selected mode to the default settings

Setup Menu

¦ Setting the Time

O

MENU

m

→ Setup → Time → ENTER

E

Time

✎

The current time will appear every time you press the

INFO button.

■ Clock: Setting the clock is for using various timer

features of the TV.

✎

If you disconnect the power cord, you have to set

the clock again.

Clock Mode: Set up the current time manually or

automatically.

– Auto: Set the current time automatically using the

time from the digital channel.

✎

The antenna must be connected in order to set

the time automatically.

– Manual: Set the current time manually.

✎

Depending on the broadcast station and signal,

the auto time set up may not be correct. In this

case, set the time manually.

Clock Set: Set the Month, Day, Year, Hour, Minute

and am/pm.

✎

Available only when Clock Mode is set to

Manual.

✎

You can set the Month, Day, Year, Hour and

Minute directly by pressing the number buttons

on the remote control.

DST (Daylight Saving Time) (Off / On / Auto):

Switches the Daylight Saving Time function on or off.

✎

This function is only available when the Clock

Mode is set to Auto.

Time Zone: Select your time zone.

✎

This function is only available when the Clock

Mode is set to Auto.

¦ Using the Sleep Timer

O

MENU

m

→ Setup → Time → Sleep Timer →

ENTER

E

■ Sleep Timer

t

: Automatically

shuts off the TV after a preset period

of time. (30, 60, 90, 120, 150 and 180

minutes).

✎

To cancel the Sleep Timer, select

Off.

¦ Setting the On/Off Timer

O

MENU

m

→ Setup → Time → Timer 1 →

ENTER

E

■ Timer 1 / Timer 2 / Timer 3: Three different on / off

timer settings can be made. You must set the clock ﬁrst.

On Time / Off Time: Set the hour, minute, am/pm

and activate / inactivate. (To activate the timer with the

setting you have chosen, set to Activate.)

Volume: Set the desired volume level.

Contents: When the On Time is activated, you can turn

on a speciﬁc channel or play back contents such as

photo or audio ﬁles.

– TV/USB: Select TV or USB. (Make sure that an USB

device is connected to your TV.)

– Antenna: Select Air or Cable.

– Channel: Select the desired channel.

– Music: Select the folder containing MP3 ﬁles on the

USB device.

– Photo: Select the folder containing JPEG ﬁles on the

USB device.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to

activate the timer.

✎

The

c

mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned

on by the Timer): The TV will be automatically turned off

after 3 hours of being left idle to prevent overheating.

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

Timer 1

L Move U Adjust E Enter R Return

On Time

Off Time

Volume Contents

Repeat

▲

▼

Sun Mon Tue Wed Thu Fri Sat

12 00 am Inactivate

10 TV Air 3

Once

[LD450-ZC]BN68-03317B.indb 18 2011-01-10 �� 12:41:17

19

English

03 Basic Features

¦ Locking Programs

O

MENU

m

→ Setup → V-Chip → ENTER

E

V-Chip

The V-Chip feature automatically locks out programs that are

deemed inappropriate for children. The user must enter a

PIN (personal identiﬁcation number) before any of the V-Chip

restrictions are set up or changed.

✎

NOTE

x

V-Chip is not available in HDMI, Component or PC

mode.

x

The default PIN number of a new TV set is “0-0-0-0”.

x

Allow all: Press to unlock all TV ratings.

x

Block all: Press to lock all TV ratings.

■ V-Chip Lock (Off / On): You can block rated TV

Programs.

■ TV Parental Guidelines: You can block TV programs

depending on their rating. This function allows you to

control what your children are watching.

TV-Y: Young children / TV-Y7: Children 7 and over /

TV-G: General audience / TV-PG: Parental guidance /

TV-14: Viewers 14 and over / TV-MA: Mature audience

ALL: Lock all TV ratings. / FV: Fantasy violence /

V: Violence / S: Sexual situation / L: Adult Language /

D: Sexually Suggestive Dialog

✎

The V-Chip will automatically block certain

categories dealing with more sensitive material.

For example, if you block the TV-Y category,

then TV-Y7 will automatically be blocked.

Similarly, if you block the TV-G category, then

all the categories in the young adult group will

be blocked (TV-G, TV-PG, TV-14 and TV-MA).

The sub-ratings (D, L, S, V) work similarly. So,

if you block the L sub-rating in TV-PG, then

the L sub-ratings in TV-14 and TV-MA will

automatically be blocked.

■ MPAA Rating: You can block movies depending on

their MPAA rating. The Motion Picture Association of

America(MPAA) has implemented a rating system that

provides parents or guardians with advanced information

on which ﬁlms are appropriate for children.

G: General audience (no restrictions). / PG: Parental

guidance suggested. / PG-13: Parents strongly

cautioned. / R: Restricted. Children under 17 should be

accompanied by an adult. / NC-17: No children under

age 17. / X: Adults only. / NR: Not rated.

✎

The V-Chip will automatically block any

category that deals with more sensitive material.

For example, if you block the PG-13 category,

then R, NC-17 and X will automatically be

blocked.

■ Canadian English: You can block TV programs

depending on their Anglophone Canadian.

C: Programming intended for children under age 8. /

C8+: Programming generally considered acceptable for

children 8 years and over to watch on their own. /

G: General programming, suitable for all audiences. /

PG: Parental Guidance. / 14+: Programming contains

themes or content which may not be suitable for viewers

under the age of 14. / 18+: Adult programming.

✎

The V-Chip will automatically block any

category that deals with more sensitive material.

For example, if you block the G category, then

PG, 14+ and 18+ will automatically be blocked.

■ Canadian French: You can block TV programs

depending on their French Canadian rating.

G: General / 8 ans+: Programming generally considered

acceptable for children 8 years and over to watch on

their own. / 13 ans+: Programming may not be suitable

for children under the age of 13. /

16 ans+: Programming is not suitable for children under

the age of 16. / 18 ans+: Programming restricted to

adults.

✎

The V-Chip will automatically block any category

that deals with more sensitive material. For

example, if you block the 8 ans+ category, then

13 ans+, 16 ans+ and 18 ans+ will automatically

be blocked also.

■ Downloadable U.S. Rating: Parental restriction

information can be used while watching DTV channels.

✎

NOTE

x

If information is not downloaded from the

broadcasting station, the Downloadable U.S.

Rating menu is deactivated.

x

Parental restriction information is automatically

downloaded while watching DTV channels. It

may take several seconds.

x

The Downloadable U.S. Rating menu

is available for use after information is

downloaded from the broadcasting station.

However, depending on the information from

the broadcasting station, it may not be available

for use.

x

Parental restriction levels differ depending on

the broadcasting station. The default menu

name and Downloadable U.S. Rating change

depending on the downloaded information.

x

Even if you set the on-screen display to another

language, the Downloadable U.S. Rating

menu will appear in English only.

x

The rating will automatically block certain

categories that deal with more sensitive

material.

x

The rating titles (For example: Humor Level..etc)

and TV ratings (For example: DH, MH, H..etc)

may differ depending on the broadcasting

station.

[LD450-ZC]BN68-03317B.indb 19 2011-01-10 �� 12:41:18

20

English

Basic Features

■ Change PIN: The Change PIN screen will appear.

Choose any 4 digits for your PIN and enter them. As

soon as the 4 digits are entered, the Conﬁrm New

PIN screen appears. Re-enter the same 4 digits. When

the Conﬁrm screen disappears, your PIN has been

memorized.

How to watch a restricted channel

If the TV is tuned to a restricted channel, the V-Chip

will block it. The screen will go blank and the following

message will appear: This channel is blocked by

V-Chip. Please enter the PIN to unblock.

✎

If you forget the PIN, press the remote-control

buttons in the following sequence, which resets

the pin to “0-0-0-0” : POWER (off) → MUTE →

8 → 2 → 4 → POWER (on)

¦ Other Features

O

MENU

m

→ Setup → ENTER

E

Language

Set the menu language.

1. Select Language and press the ENTER

E

button.

2. Choose desired language and press the ENTER

E

button.

✎

Choose between English, Español and Français.

Game Mode (Off / On)

When connecting to a game console such as PlayStation™

or Xbox™, you can enjoy a more realistic gaming experience

by selecting the game menu.

✎

NOTE

x

Precautions and limitations for game mode

– To disconnect the game console and connect

another external device, set Game Mode to Off in

the setup menu.

– If you display the TV menu in Game Mode, the

screen shakes slightly.

x

Game Mode is not available when the input source

is set to TV or PC.

x

After connecting the game console, set Game Mode

to On. Unfortunately, you may notice reduced picture

quality.

x

If Game Mode is On:

– Picture mode is set to Standard and Sound mode

is set to Movie.

– Equalizer is not available.

Caption

(On-Screen Text Messages)

■ Caption (Off / On): You can switch the

caption function on or off. If captions are

not available, they will not be displayed

on the screen.

✎

The Caption feature does not

work in Component, HDMI or PC

modes.

■ Caption Mode: You can select the desired caption

mode.

✎

The availability of captions depends on the

program being broadcasted.

Default / CC1~CC4 / Text1~Text4: (analog channels

only) The Analog Caption function operates in either

analog TV channel mode or when a signal is supplied

from an external device to the TV. (Depending on the

broadcasting signal, the Analog Caption function may or

may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 /

Text1~Text4: (digital channels only) The Digital Captions

function works with digital channels.

✎

Service1~6 may not be available in digital caption

mode depending on the broadcast.

■ Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and

Large. The default is Standard.

Font Style: Options include Default and Styles 0 to 7.

The default is Style 0.

Foreground Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan.

You can change the color of the letter. The default is

White.

Background Color: Options include Default, White,

Black, Red, Green, Blue, Yellow, Magenta and Cyan.

You can change the background color of the caption.

The default is Black.

Foreground Opacity: This adjusts the opacity of text.

Options include Default, Transparent, Translucent, Solid

and Flashing.

Background Opacity: This adjusts the opacity of

the caption background. Options include Default,

Transparent, Translucent, Solid and Flashing.

Return to Default: This option sets each Size, Font

Style, Foreground Color, Background Color, Foreground

Opacity and Background Opacity to its default.

MEDIA.P

P

POWER

SLEEP

S.MODE

P.MODE

[LD450-ZC]BN68-03317B.indb 20 2011-01-10 �� 12:41:18

La page charge ...

Samsung LN22D450G1F Manuel utilisateur

Samsung LN22D450G1F Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents