Sony CDX-GT210 Le manuel du propriétaire

Operating Instructions

Bedienungsanleitung

Mode d’emploi

Istruzioni per l’uso

Gebruiksaanwijzing

CDX-GT212

CDX-GT210

2-699-134-11 (1)

GB

DE

FR

IT

NL

To cancel the demonstration (DEMO) display, see page 10.

Zum Deaktivieren der Demo-Anzeige (DEMO) schlagen Sie bitte auf Seite 10 nach.

Pour annuler la démonstration (DEMO), reportez-vous à la page 10.

Per annullare la dimostrazione (DEMO), vedere pagina 10.

Om de demonstratie (DEMO) te annuleren, zie pagina 10.

©

2006 Sony Corporation

FM

/

MW

/

LW

Compact Disc Player

2

Warning if your car’s ignition has no

ACC position

Be sure to set the Auto Off function (page 10).

The unit will shut off completely and

automatically in the set time after the unit is

turned off, which prevents battery drain.

If you do not set the Auto Off function, press

and hold (OFF) until the display disappears

each time you turn the ignition off.

For installation and connections, see the

supplied installation/connections manual.

This label is located on the bottom of the

chassis.

Disposal of Old Electrical &

Electronic Equipment (Applicable in

the European Union and other

European countries with separate

collection systems)

This symbol on the product or on its

packaging indicates that this product shall not be treated

as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. The recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please contact

your local Civic Office, your household waste disposal

service or the shop where you purchased the product.

Microsoft, Windows Media,

and the Windows logo are

trademarks or registered

trademarks of Microsoft

Corporation in the United States and/or other

countries.

3

Table of Contents

Welcome ! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting Started

Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . 4

Detaching the front panel . . . . . . . . . . . . . . . . . 4

Attaching the front panel . . . . . . . . . . . . . . . 5

Location of controls and basic

operations

Main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

CD

Display items . . . . . . . . . . . . . . . . . . . . . . . . 7

Repeat and shuffle play. . . . . . . . . . . . . . . . . 7

Radio

Storing and receiving stations . . . . . . . . . . . . . . 7

Storing automatically — BTM . . . . . . . . . . . 7

Storing manually. . . . . . . . . . . . . . . . . . . . . . 7

Receiving the stored stations . . . . . . . . . . . . 7

Tuning automatically . . . . . . . . . . . . . . . . . . 7

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting AF and TA . . . . . . . . . . . . . . . . . . . . 8

Selecting PTY. . . . . . . . . . . . . . . . . . . . . . . . 9

Setting CT. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Other functions

Changing the sound settings. . . . . . . . . . . . . . . 9

Adjusting the balance and fader

— BAL/FAD . . . . . . . . . . . . . . . . . . . . . . . . 9

Customizing the equalizer curve

— EQ lite . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Adjusting setup items — SET . . . . . . . . . . . . 10

Using optional equipment. . . . . . . . . . . . . . . . 10

Auxiliary audio equipment. . . . . . . . . . . . . 10

Additional Information

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Notes on discs . . . . . . . . . . . . . . . . . . . . . . 11

About MP3/WMA files . . . . . . . . . . . . . . . 12

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Removing the unit. . . . . . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 13

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 14

Error displays/Messages. . . . . . . . . . . . . . . 15

4

Welcome !

Thank you for purchasing this Sony Compact

Disc Player. You can enjoy your drive with the

following functions.

• CD playback

You can play CD-DA (also containing CD

TEXT*) and CD-R/CD-RW (MP3/WMA files

also containing Multi Session (

page 12)).

• Radio reception

–You can store up to 6 stations per band (FM1,

FM2, FM3, MW and LW).

–BTM (Best Tuning Memory): the unit selects

strong signal stations and stores them.

• RDS services

–You can use FM station with Radio Data

System (RDS).

• Sound adjustment

–EQ lite: You can choose any one of 6 preset

equalizer curves.

• Auxiliary equipment connection

An AUX input jack on the front of the unit

allows connection of a portable audio device.

* A CD TEXT disc is a CD-DA that includes

information such as disc, artist and track name.

Getting Started

Setting the clock

The clock uses a 24-hour digital indication.

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until “CLOCK-ADJ” appears.

3 Press (SEEK) +.

The hour indication flashes.

4 Rotate the volume control dial to set

the hour and minute.

To move the digital indication, press (SEEK)

–/+.

5 Press the select button.

The setup is complete and the clock starts.

To display the clock, press (DSPL). Press

(DSPL) again to return to the previous display.

Tip

You can set the clock automatically with the RDS

feature (

page 9).

Detaching the front panel

You can detach the front panel of this unit to

prevent theft.

Caution alarm

If you turn the ignition switch to the OFF

position without detaching the front panel, the

caution alarm will sound for a few seconds.

The alarm will only sound if the built-in

amplifier is used.

1 Press (OFF).

The unit is turned off.

2 Press , then pull it off towards you.

Notes

• Do not drop or put excessive pressure on the front

panel and display window.

• Do not subject the front panel to heat/high

temperature or moisture. Avoid leaving it in a parked

car or on a dashboard/rear tray.

Type of discs Label on the disc

CD-DA

MP3

WMA

5

Attaching the front panel

Engage part A of the front panel with part B of

the unit, as illustrated, and push the left side into

position until it clicks.

Note

Do not put anything on the inner surface of the front

panel.

B

A

6

Location of controls and basic operations

Main unit

Refer to the pages listed for details.

A OFF button

To power off; stop the source.

B EQ (equalizer) button 9

To select an equalizer type (XPLOD,

NATURAL, HARD, UPBEAT, VOCAL,

CUSTOM or OFF).

C Volume control dial/select button 9

To adjust volume (rotate); select setup items

(press and rotate).

D SOURCE button

To power on; change the source (Radio/CD/

AUX).

E Disc slot

To insert the disc (label side up). Playback

starts automatically.

F Display window

G AUX input jack 10

To connect a portable audio device.

H Z (eject) button

To eject the disc.

I (front panel release) button 4

J PTY (Program Type) button 9

To select PTY in RDS.

K SEEK –/+ buttons

CD:

To skip tracks (press); skip tracks

continuously (press, then press again within

about 1 second and hold); reverse/fast-

forward a track (press and hold).

Radio:

To tune in stations automatically (press); find

a station manually (press and hold).

L MODE button 7

To select the radio band (FM/MW/LW).

M DSPL (display)/DIM (dimmer) button

7, 8

To change display items (press); change the

display brightness (press and hold).

N Number buttons

CD:

(1)/(2): ALBM –/+*

To skip albums (press); skip albums

continuously (press and hold).

(3): REP 7

(4): SHUF 7

(6): PAUSE

To pause playback. To cancel, press

again.

Radio:

To receive stored stations (press); store

stations (press and hold).

O AF (Alternative Frequencies)/TA

(Traffic Announcement) button

8

To set AF and TA in RDS.

* When an MP3/WMA is played.

OFF

PTY

AF

/

TADSPL

PUSH SELECT

SEEK

PAUSE

ALBMDIM REP SHUF

EQ

AUX

123456

MODE

SOURCE

1

qa qsq;9

2

qd qgqf

4 5 8673

CDX-GT212

CDX-GT210

7

CD

Display items

*1 Album number is displayed only when the album is

changed.

*2 When playing an MP3, ID3 tag is displayed, and

when playing a WMA, WMA tag is displayed.

To change display items, press (DSPL); scroll

display items, set “A.SCRL-ON” (

page 10).

Tip

Displayed items will differ, depending on the disc type,

recorded format and settings. For details on MP3/

WMA, see

page 12.

Repeat and shuffle play

1 During playback, press (3) (REP) or

(4) (SHUF) repeatedly until the

desired setting appears.

* When an MP3/WMA is played.

To return to normal play mode, select “ OFF”

or “SHUF OFF.”

Radio

Storing and receiving stations

Caution

When tuning in stations while driving, use Best

Tuning Memory (BTM) to prevent an accident.

Storing automatically — BTM

1 Press (SOURCE) repeatedly until

“TUNER” appears.

To change the band, press (MODE)

repeatedly. You can select from FM1, FM2,

FM3, MW or LW.

2 Press and hold the select button.

The setup display appears.

3 Press the select button repeatedly

until “BTM” appears.

4 Press (SEEK) +.

The unit stores stations in order of frequency

on the number buttons.

A beep sounds when the setting is stored.

Storing manually

1 While receiving the station that you

want to store, press and hold a

number button ((1) to (6)) until

“MEMORY” appears.

The number button indication appears in the

display.

Note

If you try to store another station on the same number

button, the previously stored station will be replaced.

Tip

When a RDS station is stored, the AF/TA setting is

also stored (

page 8).

Receiving the stored stations

1 Select the band, then press a number

button ((1) to (6)).

Tuning automatically

1 Select the band, then press (SEEK) –/+

to search for the station.

Scanning stops when the unit receives a

station. Repeat this procedure until the

desired station is received.

Select To play

TRACK track repeatedly.

ALBUM* album repeatedly.

SHUF ALBUM* album in random order.

SHUF DISC disc in random order.

Track number/Elapsed playing time, Disc/

artist name, Album number*

1

, Album

name, Track name, Text information*

2

,

Clock

continue to next page t

8

Tip

If you know the frequency of the station you want to

listen to, press and hold (SEEK)

–/+ to locate the

approximate frequency, then press (SEEK)

–/+

repeatedly to fine adjust to the desired frequency

(manual tuning).

RDS

Overview

FM stations with Radio Data System (RDS)

service send inaudible digital information along

with the regular radio program signal.

Display items

A Frequency*

1

(Program service name), Preset

number, Clock, RDS data

B TA/TP*

2

*1 While receiving the RDS station, “ *” is displayed

on the left of the frequency indication.

*2 “TA” flashes during traffic information. “TP” lights

up while such a station is received.

To change display items A, press (DSPL).

RDS services

This unit automatically provides RDS services as

follows:

Notes

• Depending on the country/region, not all RDS

functions may be available.

• RDS will not work if the signal strength is too weak,

or if the station you are tuned to is not transmitting

RDS data.

Setting AF and TA

1 Press (AF/TA) repeatedly until the

desired setting appears.

Storing RDS stations with the AF and

TA setting

You can preset RDS stations along with the AF/

TA setting. If you use the BTM function, only

RDS stations are stored with the same AF/TA

setting.

If you preset manually, you can preset both RDS

and non-RDS stations with the AF/TA setting for

each.

1 Set AF/TA, then store the station with BTM or

manually.

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements so as to not miss hearing them.

1 Rotate the volume control dial to adjust the

volume level.

2 Press and hold (AF/TA) until “TA” appears.

Receiving emergency

announcements

With AF or TA on, the emergency

announcements will automatically interrupt the

currently selected source.

Staying with one regional program

— REG

When the AF function is on: this unit’s factory

setting restricts reception to a specific region, so

you will not be switched to another regional

station with a stronger frequency.

If you leave this regional program’s reception

area, set “REG-OFF” in setup during FM

reception (

page 10).

Note

This function does not work in the UK and in some

other areas.

AF (Alternative Frequencies)

Selects and retunes the station with the

strongest signal in a network. By using this

function, you can continuously listen to the

same program during a long-distance drive

without having to retune the same station

manually.

TA (Traffic Announcement)/TP (Traffic

Program)

Provides current traffic information/programs.

Any information/program received, will

interrupt the currently selected source.

PTY (Program Types)

Displays the currently received program type.

Also searches your selected program type.

CT (Clock Time)

The CT data from the RDS transmission sets

the clock.

BA

Select To

AF-ON activate AF and deactivate TA.

TA-ON activate TA and deactivate AF.

AF, TA-ON activate both AF and TA.

AF, TA-OFF deactivate both AF and TA.

9

Local Link function (UK only)

This function enables you to select other local

stations in the area, even if they are not stored on

your number buttons.

1 During FM reception, press a number button

((1) to (6)) on which a local station is stored.

2 Within 5 seconds, press again a number button

of the local station.

Repeat this procedure until the local station is

received.

Selecting PTY

1 Press (PTY) during FM reception.

The current program type name appears if the

station is transmitting PTY data.

2 Press (PTY) repeatedly until the

desired program type appears.

3 Press (SEEK) –/+.

The unit starts to search for a station

broadcasting the selected program type.

Type of programs

Note

You cannot use this function in countries/regions

where no PTY data is available.

Setting CT

1 Set “CT-ON” in setup (page 10).

Notes

• The CT function may not work even though an RDS

station is being received.

• There might be a difference between the time set by

the CT function and the actual time.

Other functions

Changing the sound settings

Adjusting the balance and fader

— BAL/FAD

1 Press the select button repeatedly

until “BAL” or “FAD” appears.

The item changes as follows:

LOW*

1

t HI*

1

t BAL (left-right) t

FAD (front-rear) t AUX*

2

*1 When EQ lite is activated (page 9).

*2 When AUX source is activated (page 10).

2 Rotate the volume control dial to

adjust the selected item.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Customizing the equalizer curve

— EQ lite

“CUSTOM” of EQ lite allows you to make your

own equalizer settings.

1 Select a source, then press (EQ)

repeatedly to select “CUSTOM.”

2 Press the select button repeatedly

until “LOW” or “HI” appears.

3 Rotate the volume control dial to

adjust the selected item.

The volume level is adjustable in 1 dB steps,

from –10 dB to +10 dB.

Repeat steps 2 and 3 to adjust the equalizer

curve.

To restore the factory-set equalizer curve,

press and hold the select button before the

setting is complete.

After 3 seconds, the setting is complete and

the display returns to normal play/reception

mode.

Tip

Other equalizer types are also adjustable.

NEWS (News), AFFAIRS (Current Affairs),

INFO (Information), SPORT (Sports),

EDUCATE (Education), DRAMA (Drama),

CULTURE (Culture), SCIENCE (Science),

VARIED (Varied), POP

M (Popular Music),

ROCK

M (Rock Music), EASY M (Easy

Listening), LIGHT

M (Light Classical),

CLASSICS (Classical), OTHER

M (Other

Music Type), WEATHER (Weather),

FINANCE (Finance), CHILDREN (Children’s

Programs), SOCIAL

A (Social Affairs),

RELIGION (Religion), PHONE

IN (Phone In),

TRAVEL (Travel), LEISURE (Leisure), JAZZ

(Jazz Music), COUNTRY (Country Music),

NATION

M (National Music), OLDIES (Oldies

Music), FOLK

M (Folk Music), DOCUMENT

(Documentary)

10

Adjusting setup items — SET

1 Press and hold the select button.

The setup display appears.

2 Press the select button repeatedly

until the desired item appears.

3 Rotate the volume control dial to

select the setting (example “ON” or

“OFF”).

4 Press and hold the select button.

The setup is complete and the display returns

to normal play/reception mode.

Note

Displayed items will differ, depending on the source

and setting.

The following items can be set (follow the page

reference for details):

“z” indicates the default settings.

Using optional equipment

Auxiliary audio equipment

By connecting an optional portable audio device

to the AUX input jack (stereo mini jack) on the

unit and then simply selecting the source, you

can listen on your car speakers. The volume level

is adjustable for any difference between the unit

and the portable audio device. Follow the

procedure below:

Connecting the portable audio

device

1 Turn off the portable audio device.

2 Turn down the volume on the unit.

3 Connect to the unit.

* Be sure to use a straight type plug.

CLOCK-ADJ (Clock Adjust) (page 4)

CT (Clock Time)

To set “CT-ON” or “CT-OFF” (z) (page 8, 9).

BEEP

To set “BEEP-ON” (z) or “BEEP-OFF.”

AUX-A*

1

(AUX Audio)

To turn the AUX source display “AUX-A-ON”

(

z) or “AUX-A-OFF” (page 10).

A.OFF (Auto Off)

To shut off automatically after a desired time

when the unit is turned off: “A.OFF-NO” (

z),

“A.OFF-30S (Seconds),” “A.OFF-30M

(Minutes)” or “A.OFF-60M (Minutes).”

DEMO*

1

(Demonstration)

To set “DEMO-ON” (z) or “DEMO-OFF.”

DIM (Dimmer)

To change the brightness of the display.

–“DIM-ON”: to dim the display.

–“DIM-OFF” (

z): to deactivate the dimmer.

M.DSPL (Motion Display)

– “M.DSPL-ON” (z): to show moving patterns.

–“M.DSPL-OFF”: to deactivate the Motion

Display.

A.SCRL (Auto Scroll)

To scroll long displayed item automatically

when the album/track is changed.

–“A.SCRL-ON” (

z): to scroll.

– “A.SCRL-OFF”: to not scroll.

LOCAL (Local Seek Mode)

–“LOCAL-ON”: to only tune into stations with

stronger signals.

–“LOCAL-OFF” (

z): to tune normal reception.

MONO (Monaural Mode)*

2

To improve poor FM reception, select monaural

reception mode.

–“MONO-ON”: to hear stereo broadcast in

monaural.

–“MONO-OFF” (

z): to hear stereo broadcast in

stereo.

REG*

2

(Regional)

To set “REG-ON” (

z) or “REG-OFF” (page 8).

LOUD (Loudness)

To allow you to listen clearly at low volume

levels.

–“LOUD -ON”: to reinforce bass and treble.

–“LOUD -OFF” (

z) : to not reinforce bass and

treble.

BTM (page 7)

*1 When the unit is turned off.

*2 When FM is received.

AUX

Connecting cord*

(not supplied)

11

Adjust the volume level

Be sure to adjust the volume for each connected

audio device before playback.

1 Turn down the volume on the unit.

2 Press (SOURCE) repeatedly until “AUX”

appears.

“FRONT IN” appears.

3 Start playback of the portable audio device at a

moderate volume.

4 Set your usual listening volume on the unit.

5 Press the select button repeatedly until “AUX”

appears, and rotate the volume control dial to

adjust the input level (–8 dB to +18 dB).

Additional Information

Precautions

• If your car has been parked in direct sunlight,

allow the unit to cool off before operating it.

• Power antenna (aerial) will extend automatically

while the unit is operating.

Moisture condensation

On a rainy day or in a very damp area, moisture

condensation may occur inside the lenses and

display of the unit. Should this occur, the unit will

not operate properly. In such a case, remove the disc

and wait for about an hour until the moisture has

evaporated.

To maintain high sound quality

Be careful not to splash juice or other soft drinks

onto the unit or discs.

Notes on discs

• To keep a disc clean, do not touch its surface.

Handle the disc by its edge.

• Keep your discs in their cases or disc magazines

when not in use.

• Do not subject discs to heat/high temperature.

Avoid leaving them in a parked car or on a

dashboard/rear tray.

• Do not attach labels, or use discs with sticky ink/

residue. Such discs may stop spinning when used,

causing a malfunction, or may ruin the disc.

• Do not use any discs with labels or stickers

attached.

The following malfunctions may result from using

such discs:

– Inability to eject a disc (due to a label or sticker

peeling off and jamming the eject mechanism).

– Inability to read audio data correctly (e.g.,

playback skipping, or no playback) due to heat

shrinking of a sticker or label causing a disc to

warp.

• Discs with non-standard shapes (e.g., heart,

square, star) cannot be played on this unit.

Attempting to do so may damage the unit. Do not

use such discs.

• You cannot play 8 cm (3

1

/4 in) CDs.

continue to next page t

12

• Before playing, clean the discs

with a commercially available

cleaning cloth. Wipe each disc

from the center out. Do not use

solvents such as benzine,

thinner, commercially available

cleaners, or antistatic spray

intended for analog discs.

Notes on CD-R/CD-RW discs

• Some CD-Rs/CD-RWs (depending on the

equipment used for its recording or the condition

of the disc) may not play on this unit.

• You cannot play a CD-R/a CD-RW that is not

finalized.

Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Recently, various music discs encoded with

copyright protection technologies are marketed by

some record companies. Please be aware that among

those discs, there are some that do not conform to

the CD standard and may not be playable by this

product.

About MP3/WMA files

MP3, which stands for MPEG-1 Audio Layer-3, is a

music file compression format standard. It

compresses audio CD data to approximately 1/10 of

its original size.

WMA, which stands for Windows Media Audio, is

another music file compression format standard. It

compresses audio CD data to approximately 1/22*

of its original size.

* only for 64 kbps

• The unit is compatible with the ISO 9660 level 1/

level 2 format, Joliet/Romeo in the expansion

format, and Multi Session.

• The maximum number of:

– folders (albums): 150 (including root and empty

folders).

– MP3/WMA files (tracks) and folders contained

in a disc: 300 (if a folder/file names contain

many characters, this number may become less

than 300).

– displayable characters for a folder/file name is

32 (Joliet), or 64 (Romeo).

• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to

MP3 only. ID3 tag is 15/30 characters (1.0 and

1.1), or 63/126 characters (2.2, 2.3 and 2.4).

WMA tag is 63 characters.

Playback order of MP3/WMA files

Notes

• When naming an MP3 file/WMA file, be sure to add

the file extension “.mp3”/“.wma” to the file name.

• During playback of a VBR (variable bit rate) MP3/

WMA file or fast-forward/reverse, elapsed playing

time may not display accurately.

• When the disc is recorded in Multi Session, only the

first track of the first session format is recognized

and played (any other format is skipped). The

priority of the format is CD-DA and MP3/WMA.

– When the first track is a CD-DA, only CD-DA of the

first session is played.

– When the first track is not a CD-DA, an MP3/WMA

session is played. If the disc has no data in any of

these formats, “NO MUSIC” is displayed.

Notes on MP3

• Be sure to finalize the disc before using on the unit.

• If you play a high-bit-rate MP3, such as 320 kbps,

sound may be intermittent.

Notes on WMA

• Files made with lossless compression are not

playable.

• Files protected by copyright are not playable.

If you have any questions or problems concerning

your unit that are not covered in this manual, consult

your nearest Sony dealer.

Maintenance

Fuse replacement

When replacing the fuse, be

sure to use one matching the

amperage rating stated on the

original fuse. If the fuse blows,

check the power connection and

replace the fuse. If the fuse

blows again after replacement,

there may be an internal

malfunction. In such a case,

consult your nearest Sony

dealer.

Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side. However,

since the audio material side does not conform to

the Compact Disc (CD) standard, playback on this

product is not guaranteed.

Folder

(album)

MP3/WMA file

(track)

MP3/WMA

Fuse (10A)

13

Cleaning the connectors

The unit may not function properly if the connectors

between the unit and the front panel are not clean. In

order to prevent this, detach the front panel (page 4)

and clean the connectors with a cotton swab. Do not

apply too much force. Otherwise, the connectors

may be damaged.

Notes

• For safety, turn off the ignition before cleaning the

connectors, and remove the key from the ignition

switch.

• Never touch the connectors directly with your fingers

or with any metal device.

Removing the unit

1 Remove the protection collar.

1 Detach the front panel (page 4).

2 Engage the release keys together with the

protection collar.

3 Pull out the release keys to remove the

protection collar.

2 Remove the unit.

1 Insert both release keys simultaneously

until they click.

2 Pull the release keys to unseat the unit.

3 Slide the unit out of the mounting.

Specifications

CD Player section

Signal-to-noise ratio: 95 dB

Frequency response: 10 – 20,000 Hz

Wow and flutter: Below measurable limit

Tuner section

FM

Tuning range: 87.5 – 108.0 MHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz

Usable sensitivity: 9 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 67 dB (stereo), 69 dB (mono)

Harmonic distortion at 1 kHz: 0.5 % (stereo),

0.3 % (mono)

Separation: 35 dB at 1 kHz

Frequency response: 30 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz

LW: 153 – 279 kHz

Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 10.7 MHz/450 kHz

Sensitivity: MW: 30 µV, LW: 40 µV

Main unit

Back of the front

panel

Orient the release

keys as shown.

continue to next page t

Hook facing

inwards.

14

Power amplifier section

Outputs: Speaker outputs (sure seal connectors)

Speaker impedance: 4 – 8 ohms

Maximum power output: 45 W × 4 (at 4 ohms)

General

Output:

Power antenna (aerial) relay control terminal

Inputs:

Telephone ATT control terminal

Antenna (aerial) input terminal

AUX input jack (stereo mini jack)

Tone controls:

Low: ±10 dB at 100 Hz

High: ±10 dB at 10 kHz

Loudness:

+9 dB at 100 Hz

+5 dB at 10 kHz

Power requirements: 12 V DC car battery

(negative ground (earth))

Dimensions: Approx. 178 × 50 × 179 mm

(7

1

/8 × 2 × 7

1

/8 in) (w/h/d)

Mounting dimensions: Approx. 182 × 53 × 162 mm

(7

1

/4 × 2

1

/8 × 6

1

/2 in) (w/h/d)

Mass: Approx. 1.2 kg (2 lb 11 oz)

Supplied accessory:

Parts for installation and connections (1 set)

Design and specifications are subject to change

without notice.

Troubleshooting

The following checklist will help you remedy

problems you may encounter with your unit.

Before going through the checklist below, check the

connection and operating procedures.

General

No power is being supplied to the unit.

Check the connection. If everything is in order, check

the fuse.

The power antenna (aerial) does not extend.

The power antenna (aerial) does not have a relay box.

No sound.

• The volume is too low.

• The position of the fader control “FAD” is not set for

a 2-speaker system.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and Thomson.

• Halogenated flame retardants are not used in the

certain printed wiring boards.

• Halogenated flame retardants are not used in

cabinets.

• Paper is used for the packaging cushions.

No beep sound.

The beep sound is canceled (page 10).

The contents of the memory have been erased.

• The power supply lead or battery has been

disconnected.

• The power supply lead is not connected properly.

Stored stations and correct time are erased.

The fuse has blown.

Makes noise when the position of the ignition

is switched.

The leads are not matched correctly with the car’s

accessory power connector.

The display disappears from/does not appear

in the display window.

• The dimmer is set “DIM-ON” (page 10).

• The display disappears if you press and hold (OFF).

t Press and hold (OFF) on the unit until the

display appears.

• The connectors are dirty (page 13).

The Auto Off function does not operate.

The unit is turned on. The Auto Off function activates

after turning off the unit.

t Turn off the unit.

CD playback

The disc cannot be loaded.

• Another disc is already loaded.

• The disc has been forcibly inserted upside down or in

the wrong way.

The disc does not playback.

• Defective or dirty disc.

• The CD-Rs/CD-RWs are not for audio use (page 12).

MP3/WMA files cannot be played back.

The disc is incompatible with the MP3/WMA format

and version (page 12).

MP3/WMA files take longer to play back than

others.

The following discs take a longer time to start

playback.

– a disc recorded with a complicated tree structure.

– a disc recorded in Multi Session.

– a disc to which data can be added.

The display items do not scroll.

• For discs with very many characters, those may not

scroll.

• “A.SCRL” is set to “OFF”.

t Set “A.SCRL-ON” (page 10).

The sound skips.

• Installation is not correct.

t Install the unit at an angle of less than 45° in a

sturdy part of the car.

• Defective or dirty disc.

The disc will not eject.

Press Z (eject) (page 6).

15

Error displays/Messages

If these solutions do not help improve the situation,

consult your nearest Sony dealer.

If you take the unit to be repaired because of CD

playback trouble, bring the disc that was used at the

time the problem began.

Radio reception

The stations cannot be received.

The sound is hampered by noises.

• Connect a power antenna (aerial) control lead (blue)

or accessory power supply lead (red) to the power

supply lead of a car’s antenna (aerial) booster (only

when your car has built-in FM/MW/LW antenna

(aerial) in the rear/side glass).

• Check the connection of the car antenna (aerial).

• The auto antenna (aerial) will not go up.

t Check the connection of the power antenna

(aerial) control lead.

• Check the frequency.

Preset tuning is not possible.

• Store the correct frequency in the memory.

• The broadcast signal is too weak.

Automatic tuning is not possible.

• Setting of the local seek mode is not correct.

t Tuning stops too frequently:

Set “LOCAL-ON” (page 10).

t Tuning does not stop at a station:

Set “MONO-ON” (page 10).

• The broadcast signal is too weak.

t Perform manual tuning.

During FM reception, the “ST” indication

flashes.

• Tune in the frequency accurately.

• The broadcast signal is too weak.

t Set “MONO-ON” (page 10).

An FM program broadcast in stereo is heard in

monaural.

The unit is in monaural reception mode.

t Set “MONO-OFF” (page 10).

RDS

The SEEK starts after a few seconds of

listening.

The station is non-TP or has weak signal.

t Deactivate TA (page 8).

No traffic announcements.

• Activate TA (page 8).

• The station does not broadcast any traffic

announcements despite being TP.

t Tune in another station.

PTY displays “- - - - - - - -.”

• The current station is not an RDS station.

• RDS data has not been received.

• The station does not specify the program type.

ERROR

• The disc is dirty or inserted upside down.

t Clean or insert the disc correctly.

• A blank disc has been inserted.

• The disc cannot play due to a problem.

t Insert another disc.

FAILURE

The connection of speakers is incorrect.

t See the installation guide manual of this model to

check the connection.

L. SEEK +/–

The local seek mode is on during automatic tuning.

NO AF

There is no alternative frequency for the current

station.

t Press (SEEK) –/+ while the program service name

is flashing. The unit starts searching for another

frequency with the same PI (Program

Identification) data (“PI SEEK” appears).

NO INFO

Text information is not written in the MP3/WMA file.

NO MUSIC

The disc is not a music file.

t Insert a music CD.

NO NAME

An album/track name is not written in the track.

NO TP

The unit will continue searching for available TP

stations.

OFFSET

There may be an internal malfunction.

t Check the connection. If the error indication

remains on in the display, consult your nearest

Sony dealer.

READ

The unit is reading all track and album information on

the disc.

t Wait until reading is complete and playback starts

automatically. Depending on the disc structure, it

may take more than a minute.

PUSH EJT

The disc cannot be ejected.

t Press Z (eject) (page 6).

“ ” or “ ”

During reverse or fast-forward, you have reached the

beginning or the end of the disc and you cannot go any

further.

“ ”

The character cannot be displayed with the unit.

2

Warnhinweis, wenn die Zündung Ihres

Fahrzeugs nicht über eine

Zubehörposition (ACC oder I) verfügt

Aktivieren Sie unbedingt die

Abschaltautomatik (Seite 10).

Nach dem Ausschalten wird das Gerät dann

nach der voreingestellten Zeit automatisch

vollständig abgeschaltet, so dass der

Autobatterie kein Strom mehr entzogen wird.

Wenn Sie die Abschaltautomatik nicht

aktivieren, müssen Sie jedes Mal, wenn Sie die

Zündung ausschalten, die Taste (OFF)

gedrückt halten, bis die Anzeige ausgeblendet

wird.

Wichtig!

Bitte nehmen Sie sich etwas Zeit, um

den Geräte-Pass vollständig

auszufüllen. Dieser befindet sich auf

der hinteren Umschlagseite dieser

Bedienungsanleitung.

Zur Installation und zum Anschluss siehe die

mitgelieferte Installations-/Anschlussanleitung.

Dieses Etikett befindet sich an der Unterseite

des Gehäuses.

Entsorgung von gebrauchten

elektrischen und elektronischen

Geräten (anzuwenden in den

Ländern der Europäischen Union

und anderen europäischen Ländern

mit einem separaten Sammelsystem

für diese Geräte)

Das Symbol auf dem Produkt oder seiner Verpackung

weist darauf hin, dass dieses Produkt nicht als normaler

Haushaltsabfall zu behandeln ist, sondern an einer

Annahmestelle für das Recycling von elektrischen und

elektronischen Geräten abgegeben werden muss. Durch

Ihren Beitrag zum korrekten Entsorgen dieses Produkts

schützen Sie die Umwelt und die Gesundheit Ihrer

Mitmenschen. Umwelt und Gesundheit werden durch

falsches Entsorgen gefährdet. Materialrecycling hilft, den

Verbrauch von Rohstoffen zu verringern. Weitere

Informationen über das Recycling dieses Produkts

erhalten Sie von Ihrer Gemeinde, den kommunalen

Entsorgungsbetrieben oder dem Geschäft, in dem Sie das

Produkt gekauft haben.

Microsoft, Windows Media

und das Windows-Logo sind

Markenzeichen oder

eingetragene Markenzeichen

der Microsoft Corporation in den USA und/oder

anderen Ländern.

3

Inhalt

Willkommen!. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Vorbereitungen

Einstellen der Uhr . . . . . . . . . . . . . . . . . . . . . . . 4

Abnehmen der Frontplatte. . . . . . . . . . . . . . . . . 4

Anbringen der Frontplatte. . . . . . . . . . . . . . . 5

Lage und Grundfunktionen der

Teile und Bedienelemente

Hauptgerät. . . . . . . . . . . . . . . . . . . . . . . . . . . 6

CD

Informationen im Display. . . . . . . . . . . . . . . 7

Repeat und Shuffle Play . . . . . . . . . . . . . . . . 7

Radio

Speichern und Empfangen von Sendern . . . . . . 7

Automatisches Speichern von Sendern

— BTM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Manuelles Speichern von Sendern . . . . . . . . 7

Empfangen gespeicherter Sender . . . . . . . . . 7

Automatisches Einstellen von Sendern. . . . . 8

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Übersicht. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Einstellen von AF und TA . . . . . . . . . . . . . . 8

Auswählen des Programmtyps (PTY) . . . . . 9

Einstellen der Uhrzeit (CT). . . . . . . . . . . . . . 9

Weitere Funktionen

Ändern der Klangeinstellungen . . . . . . . . . . . 10

Einstellen der Balance und des Faders

— BAL/FAD . . . . . . . . . . . . . . . . . . . . . . . 10

Individuelles Einstellen der Equalizer-Kurve

— EQ lite . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Einstellen von Konfigurationsoptionen

— SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Verwenden gesondert erhältlicher Geräte. . . . 11

Zusätzliche Audiogeräte. . . . . . . . . . . . . . . 11

Weitere Informationen

Sicherheitsmaßnahmen. . . . . . . . . . . . . . . . . . 12

Hinweise zu CDs . . . . . . . . . . . . . . . . . . . . 12

MP3-/WMA-Dateien . . . . . . . . . . . . . . . . . 12

Wartung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Ausbauen des Geräts. . . . . . . . . . . . . . . . . . . . 14

Technische Daten . . . . . . . . . . . . . . . . . . . . . . 14

Störungsbehebung. . . . . . . . . . . . . . . . . . . . . . 15

Fehleranzeigen/Meldungen . . . . . . . . . . . . 16

4

Willkommen!

Danke, dass Sie sich für diesen CD-Player von

Sony entschieden haben. Mit diesem Gerät

stehen Ihnen im Auto die folgenden Funktionen

zur Verfügung.

• CD-Wiedergabe

Wiedergabe von CD-DAs (auch solche mit CD

TEXT*) und CD-Rs/CD-RWs (MP3-/WMA-

Dateien, auch auf Multisession-CDs (

Seite 12)).

• Radioempfang

–Für jeden Frequenzbereich (FM1 (UKW1),

FM2 (UKW2), FM3 (UKW3), MW und LW)

können Sie bis zu 6 Sender speichern.

–BTM (Speicherbelegungsautomatik): Das

Gerät wählt die Sender mit den stärksten

Signalen aus und speichert diese.

• RDS-Funktionen

–Sie können die RDS-Dienste von UKW-

Sendern nutzen, die RDS-Signale

(Radiodatensystem) ausstrahlen.

• Klangeinstellungen

–EQ lite: Sie können eine der 6

voreingestellten Equalizer-Kurven

auswählen.

• Anschließen eines zusätzlichen Geräts

An die AUX-Eingangsbuchse an der

Vorderseite des Geräts können Sie ein tragbares

Audiogerät anschließen.

* Eine CD mit CD TEXT ist eine CD-DA, die

Informationen wie den Namen der CD, den Namen

des Interpreten und die Namen der Titel enthält.

Vorbereitungen

Einstellen der Uhr

Die Uhr zeigt die Uhrzeit im 24-Stunden-Format

digital an.

1 Halten Sie die Auswahltaste gedrückt.

Die Einstellanzeige erscheint.

2 Drücken Sie die Auswahltaste so oft,

bis „CLOCK-ADJ“ angezeigt wird.

3 Drücken Sie (SEEK) +.

Die Stundenanzeige blinkt.

4 Drehen Sie den Lautstärkeregler, um

die Stunden und Minuten einzustellen.

Drücken Sie (SEEK) –/+, um zur jeweils

nächsten Ziffer in der Digitalanzeige zu

wechseln.

5 Drücken Sie die Auswahltaste.

Der Einstellvorgang ist damit abgeschlossen

und die Uhr beginnt zu laufen.

Zum Einblenden der Uhrzeit drücken Sie

(DSPL). Drücken Sie (DSPL) erneut, um zur

normalen Anzeige zurückzuschalten.

Tipp

Mithilfe der RDS-Funktion können Sie die Uhr auch

automatisch einstellen lassen (

Seite 9).

Abnehmen der Frontplatte

Um zu verhindern, dass das Gerät gestohlen

wird, können Sie die Frontplatte abnehmen.

Warnton

Wenn Sie den Zündschlüssel in die Position OFF

stellen, ohne die Frontplatte abzunehmen, ertönt

einige Sekunden lang ein Warnton.

Der Warnton wird nur ausgegeben, wenn der

integrierte Verstärker verwendet wird.

1 Drücken Sie (OFF).

Das Gerät schaltet sich aus.

2 Drücken Sie und ziehen Sie die

Frontplatte auf sich zu und heraus.

CD-Typ Beschriftung auf der CD

CD-DA

MP3

WMA

5

Hinweise

• Lassen Sie die Frontplatte nicht fallen und drücken

Sie nicht zu stark auf die Frontplatte und das

Display.

• Schützen Sie die Frontplatte vor Hitze bzw. hohen

Temperaturen und vor Feuchtigkeit. Lassen Sie sie

in geparkten Autos nicht auf dem Armaturenbrett

oder auf der Hutablage liegen.

Anbringen der Frontplatte

Setzen Sie Teil A der Frontplatte wie abgebildet

an Teil B am Gerät an und drücken Sie dann die

linke Seite hinein, bis sie mit einem Klicken

einrastet.

Hinweis

Legen Sie auf der Innenseite der Frontplatte nichts ab.

B

A

6

Lage und Grundfunktionen der Teile und Bedienelemente

Hauptgerät

Näheres finden Sie auf den angegebenen Seiten.

A Taste OFF

Ausschalten bzw. Stoppen der Tonquelle.

B Taste EQ (Equalizer) 10

Auswählen eines Equalizer-Typs (XPLOD,

NATURAL, HARD, UPBEAT, VOCAL,

CUSTOM oder OFF).

C Lautstärkeregler/Auswahltaste 10

Einstellen der Lautstärke (drehen) bzw.

Auswählen von Einstelloptionen (drücken

und drehen).

D Taste SOURCE

Einschalten bzw. Wechseln der Tonquelle

(Radio/CD/AUX).

E CD-Einschub

Legen Sie hier eine CD ein (mit der

beschrifteten Seite nach oben). Die

Wiedergabe beginnt automatisch.

F Display

G AUX-Eingangsbuchse 11

Anschließen eines tragbaren Audiogeräts.

H Taste Z (Auswerfen)

Auswerfen der CD.

I Taste (Lösen der Frontplatte) 4

J Taste PTY (Programmtyp) 9

Auswählen von PTY bei einem RDS-Sender.

K Tasten SEEK –/+

CD:

Überspringen von Titeln (drücken);

Überspringen mehrerer Titel hintereinander

(drücken, dann innerhalb von 1 Sekunde

erneut drücken und gedrückt halten) bzw.

Rückwärts-/Vorwärtssuchen in einem Titel

(gedrückt halten).

Radio:

Automatisches Einstellen von Sendern

(drücken) bzw. manuelle Sendersuche

(gedrückt halten).

L Taste MODE 7

Auswählen des Radiofrequenzbereichs (FM

(UKW)/MW/LW).

M Taste DSPL (Anzeige)/DIM (Dimmer)

7, 8

Wechseln der angezeigten Informationen

(drücken) bzw. Ändern der Helligkeit im

Display (gedrückt halten).

N Zahlentasten (Stationstasten)

CD:

(1)/(2): ALBM –/+*

Überspringen von Alben (drücken)

bzw. Überspringen mehrerer Alben

hintereinander (gedrückt halten).

(3): REP 7

(4): SHUF 7

(6): PAUSE

Anhalten der Wiedergabe. Zum

Beenden der Funktion drücken Sie die

Taste erneut.

Radio:

Einstellen gespeicherter Sender (drücken);

Speichern von Sendern (gedrückt halten).

O Taste AF (Alternativfrequenzen)/TA

(Verkehrsdurchsagen) 8

Einstellen von AF und TA bei einem RDS-

Sender.

* Bei Wiedergabe einer MP3-/WMA-Datei.

OFF

PTY

AF

/

TADSPL

PUSH SELECT

SEEK

PAUSE

ALBMDIM REP SHUF

EQ

AUX

123456

MODE

SOURCE

1

qa qsq;9

2

qd qgqf

4 5 8673

CDX-GT212

CDX-GT210

La page charge ...

Sony CDX-GT210 Le manuel du propriétaire

Ce manuel convient également à

Sony CDX-GT210 Le manuel du propriétaire

dans d''autres langues

Documents connexes