iBT800 - Instruction Sheet - English
Color: Black text on white paper (1C + 1C)
Size: 102 W x 150 H mm
Material: 85gsm wood free paper
Nov 25, 2021
CHARGING THE SPEAKER
CONTROLS OVERVIEW (BOTTOM OF UNIT)
iBT800_IS_112521-A
Printed in China
© 2022 SDI Technologies, Inc.
All rights reserved
Model: iBT800
For product support, please scan the QR code or visit:
www.ihome.com/help/ibt800
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
ISED Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device comply with ISED RF exposure requirement, users can obtain Canadian information on RF exposure and compliance.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
L'appareil est conforme aux exigences d'exposition RF ISED, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et
la conformité.
Tout changement ou modification non expressément approuvé par la partie responsable de la conformité peut annuler l'autorité de l'utilisateur à
utiliser l'équipement.
CAN ICES-3 (B) / NMB-3(B)
WARNING/DISPOSAL OF UNIT
Do NOT attempt to change the built-in battery. Doing so will void the warranty and could cause personal injury and damage to your
device. To dispose of the unit, follow the instructions below:
• Never dispose of used batteries/electronics with ordinary solid wastes, since they may contain toxic substances.
• Always dispose of used batteries/electronics in accordance with the prevailing community regulations.
• Many electronics retailers now recycle batteries and other electronic components at no charge. To find a drop-o location near
you, visit www.call2recycle.com
GENERAL BATTERY PRECAUTIONS
• Never use or charge a battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
• Never disassemble the unit or attempt to remove the battery as that could cause leakage of alkaline solution or other electrolytic
substances.
• Avoid charging a rechargeable battery when the temperature is not within 5°C - 35° C (41° - 95° Fahrenheit).
• Never expose a battery to any liquid.
• Never expose a battery to excessive heat such as direct sunlight or fire. Never use or store a lithium device in an unventilated
vehicle where excessive internal temperatures may be encountered.
• Always keep batteries out of the reach of infants and small children.
• Always charge Lithium devices on surfaces that won’t catch on fire such as cement, steel, ceramic or stone.
Wooden tables and carpeted floors are not recommended charging surfaces.
• Do not charge batteries near flammable products or liquids.
• Never leave a charging lithium device unattended.
• If the unit is to be unused for an extended period of time, such as a month or longer, charge the unit fully before storage.
IMPORTANT SAFETY INSTRUCTIONS
Please heed all warnings, read and follow all instructions and keep these instructions handy for future reference.
1 Do not use this product near water, and clean only with dry cloth.
2 Do not block any ventilation openings.
3 Heat – This product should be situated away from heat sources such as radiators, heat registers, stoves or other appliances
(including amplifiers) that produce heat.
4 Only use attachments/accessories specified by the manufacturer.
5 Unplug this product during lightning storms or when unused for long periods of time.
6 Damage Requiring Service – This product should be serviced by qualified service personnel when:
- Plug has been damaged.
- Objects have fallen into or liquid has been spilled into the enclosure.
- The unit has been exposed to rain. The unit has been dropped or the enclosure damaged.
- The unit exhibits a marked change in performance or does not operate normally.
7 No naked flame sources, such as lighted candles, should be placed on this product.
8 Attention should be drawn to the environmental aspects of battery disposal.
9 This product is suitable for use in tropical and/or moderate climates.
10 WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
11 Do not dispose of batteries in the household trash or fire.
12 Always use a UL/ETL certified charging adapter (not included), and the supplied USB charging cable.
POWER ON/OFF
Press and hold to turn speaker ON
Press to turn speaker OFF
charging (slow flash)
fully charged
RED
OFF
RED
PLAYGLOW MINI
Waterproof Portable Speaker
If necessary, insert the tip of a
paper clip or other thin tool to
reset the unit
pairing (fast flash)
connected to Bluetooth
BLUE
BLUE
low battery (fast flash)
BLUETOOTH STATUS INDICATORBATTERY STATUS INDICATOR
USB AC
adaptor
(not included)
USB charging
cable (included) CHARGE UNIT
BEFORE USE
ABOUT 2 HOURS
BLUETOOTH PAIRING
USB CHARGING PORT
RESET BUTTON
COLOR MODES/
BATTERY STATUS
FRONT OF UNIT TOP OF UNIT - LED INDICATORS
Blue LED = Bluetooth Status
PLAY/PAUSE
Red LED = Battery Status
- Press repeatedly to cycle
through color modes
- Press and hold to check
battery level status
- Press & hold to enter pairing
mode
- Select ‘iHome iBT800’ on
your BT device to connect
-
1
dans d''autres langues
- English: iHome iBT800 User manual
Documents connexes
-
iHome iBT550 Mode d'emploi
-
iHome iBT64 Manuel utilisateur
-
iHome iBTCP100 Mode d'emploi
-
iHome iCVBT20 Mode d'emploi
-
iHome iBT155 Manuel utilisateur
-
iHome aquio Bottle Manuel utilisateur
-
iHome IBT155A Waterproof Portable Speaker Manuel utilisateur
-
-
iHome iBTW281V2 TimeBoost Glow Wireless Charging + LED Color Changing Mode d'emploi