Lovibond 00386452 - MD1x0/200 - Urea T Manuel utilisateur

Lovibond® Water Testing

Tintometer® Group

Manual of Methods

MD 100 • MD 110 • MD 200

Urea

EN

Manual of Methods

Page 4

DE

Methodenhandbuch

Seite 18

ES

Manual de Métodos

Página 32

FR

Méthodes Manuel

Page 46

IT

Manuale dei Metodi

Pagina 60

PT

Métodos Manual

Página 74

NL

Handboek Methoden

Zijde 88

ZH

方法手册

Page 102

NL Handboek van Methoden 01/20EN Handbook of Methods 01/20

KS4.3 T

0.1 - 4 mmol/l KS4.3

Acid / Indicator

20

S:4.3

Instrument specific information

The test can be performed on the following devices. In addition, the required cuvette

and the absorption range of the photometer are indicated.

Instrument Type Cuvette λMeasuring Range

MD 200, MD 600, MD 610,

MD 640, MultiDirect, PM 620,

PM 630

ø 24 mm 610 nm 0.1 - 4 mmol/l KS4.3

SpectroDirect, XD 7000,

XD 7500

ø 24 mm 615 nm 0.1 - 4 mmol/l KS4.3

Material

Required material (partly optional):

Reagents Packaging Unit Part Number

Alka-M-Photometer Tablet / 100 513210BT

Alka-M-Photometer Tablet / 250 513211BT

Application List

• Waste Water Treatment

• Drinking Water Treatment

• Raw Water Treatment

Notes

1. The terms Alkalinity-m, m-Value, total alkalinity and Acid demand to KS4.3 are iden-

tical.

2. For accurate results, exactly 10 ml of water sample must be used for the test.

Display in the MD

100 / MD 110 /

MD 200

Bar code for the

detection of the

methods

Method name

Measuring range

Chemical Method

Method number

Language codes

ISO 639-1 Revision status

KS4.3 T / 20

How to use

ENMethod Reference Book4

EN

Implementation of the provision Acid capacity KS4.3 with Tablet

Select the method on the device

For this method, no ZERO measurements are to be carried out with the following de-

vices: XD 7000, XD 7500

10 ml

Fill 24 mm vial with 10 ml

sample.

Close vial(s).

Sample

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Dissolve tablet(s) by inver-

ting.

Sample

Place sample vial in the

sample chamber. • Pay

attention to the positioning.

Test

Press the TEST (XD:

START) button.

The result in Acid Capacity KS4.3 appears on the display.

Performing test

procedure

KS4.3 T / 20

NL Handboek van Methoden 01/20EN Handbook of Methods 01/20

How to use

ENMethod Reference Book 5

EN

Urea T / M390

ENMethod Reference Book1.06

EN

Urea T M390

0.1 - 2.5 mg/L Urea Ur1

Indophenol / Urease

Material

Required material (partly optional):

Reagents Packaging Unit Part Number

UREA Reagent 1 15 mL 459300

UREA Reagent 2 10 mL 459400

Ammonia No. 1 Tablet / 100 512580BT

Ammonia No. 1 Tablet / 250 512581BT

Ammonia No. 2 Tablet / 100 512590BT

Ammonia No. 2 Tablet / 250 512591BT

Set Ammonia No. 1/No. 2 100 Pc.#100 each 517611BT

Set Ammonia No. 1/No. 2 250 Pc.#250 each 517612BT

Ammonia Conditioning Powder Powder / 26 g 460170

Urea Pretreat (compensates for the interference

of free Chlorine up to 2 mg/l)

Tablet / 100 516110BT

UREA Reagent Set 1 Set 517800BT

Preparation

1. The temperature of the sample should be between 20 °C and 30 °C.

2. The analysis must take place within one hour after taking the sample at the latest.

3. With the analysis of sea water samples, before the addition of Ammonia No. 1

Tablet, twoscoops of ammonium conditioning powder must be added to the sample

and dissolved by swirling.

Remarks

1. The AMMONIA No. 1 tablet will only dissolve completely after the AMMONIA No. 2

Tablet has been added.

2. Ammonium and chloramines are accounted for in the urea determination.

Urea T / M390

ENMethod Reference Book1.0 7

EN

Determination of Urea with Tablet and Liquid Reagent

Select the method on the device.

10 mL

Sample

Fill 24 mm vial with 10 mL

sample.

Close vial(s). Place sample vial in the

sample chamber. Pay

attention to the positioning.

Zero

Press the ZERO button. Remove the vial from the

sample chamber.

24 mm

If free chlorine (HOCl)

is present, add a UREA

PRETREAT tablet.

Crush tablet(s) by rotating

slightly.

Close vial(s).

Urea T / M390

ENMethod Reference Book1.08

EN

2

Dissolve tablet(s) by

inverting.

Hold cuvettes vertically

and add equal drops by

pressing slowly.

Add 2 drops Urea Reagenz

1.

1

Close vial(s). Invert several times to mix

the contents.

Add 1 drops Urea Reagenz

2.

Close vial(s). Invert several times to mix

the contents.

Press the ENTER button.

9

4

5

6

7

8

10

11 12

1

2

3

5 min

24 mm

Wait for 5 minute(s)

reaction time.

Add AMMONIA

No.1 tablet .

Crush tablet(s) by rotating

slightly.

Urea T / M390

ENMethod Reference Book1.0 9

EN

24 mm

Add AMMONIA

No.2 tablet .

Crush tablet(s) by rotating

slightly.

Close vial(s).

Sample

Test

Dissolve tablet(s) by

inverting.

Place sample vial in the

sample chamber. Pay

attention to the positioning.

Press the TEST (XD:

START)button.

9

4

5

6

7

8

10

11 12

1

2

3

10 min

Wait for 10 minute(s)

reaction time.

Once the reaction period is finished, the measurement takes place automatically.

The result in mg/L Urea appears on the display.

Urea T / M390

ENMethod Reference Book1.010

EN

Chemical Method

Indophenol / Urease

Appendix

Interferences

Persistant Interferences

• Concentrations above 2 mg/L urea can lead to results within the measuring range. In

this case, the water sample must be diluted with water that is free from urea and the

measurement must be repeated (plausibility test).

Removeable Interferences

• A UREA PRETREAT Tablet eliminates the interference of free chlorine up to 2 mg/L

(two tablets up to 4 mg/L, 3 tablets up to 6 mg/L).

Interference from / [mg/L]

Cl22

Bibliography

R.J. Creno, R.E. Wenk, P. Bohling, Automated Micromeasurement of Urea Using Urease

and the Berthelot Reaction, American Journal of Clinical Pathology (1970), 54 (6), p.

828-832

# including stirring rod, 10 cm

Urea T / M391

ENMethod Reference Book1.012

EN

Urea T M391

0.2 - 5 mg/L Ureai) Ur2

Indophenol / Urease

Material

Required material (partly optional):

Reagents Packaging Unit Part Number

UREA Reagent 1 15 mL 459300

UREA Reagent 2 10 mL 459400

Ammonia No. 1 Tablet / 100 512580BT

Ammonia No. 1 Tablet / 250 512581BT

Ammonia No. 2 Tablet / 100 512590BT

Ammonia No. 2 Tablet / 250 512591BT

Set Ammonia No. 1/No. 2 100 Pc.#100 each 517611BT

Set Ammonia No. 1/No. 2 250 Pc.#250 each 517612BT

Ammonia Conditioning Powder Powder / 26 g 460170

Urea Pretreat (compensates for the interference

of free Chlorine up to 2 mg/l)

Tablet / 100 516110BT

UREA Reagent Set 1 Set 517800BT

Preparation

1. With the analysis of sea water samples, before the addition of Ammonia No. 1

Tablet, two scoops of ammonium conditioning powder must be added to the sample

and dissolved by swirling.

Urea T / M391

ENMethod Reference Book1.0 13

EN

Determination of Urea with Tablet and Liquid Reagent

Select the method on the device.

24 mm

5 mL

Sample

Put 5 mL sample and

5 mL of deionised water

in the sample vessel.

Close vial(s). Place sample vial in the

sample chamber. Pay

attention to the positioning.

Zero

Press the ZERO button. Remove the vial from the

sample chamber.

24 mm

If free chlorine (HOCl)

is present, add a UREA

PRETREAT tablet.

Crush tablet(s) by rotating

slightly.

Close vial(s).

Urea T / M391

ENMethod Reference Book1.014

EN

2

Dissolve tablet(s) by

inverting.

Hold cuvettes vertically

and add equal drops by

pressing slowly.

Add 2 drops UREA

Reagenz 1.

1

Close vial(s). Invert several times to mix

the contents.

Add 1 drops UREA

Reagenz 2.

Close vial(s). Invert several times to mix

the contents.

Press the ENTER button.

9

4

5

6

7

8

10

11 12

1

2

3

5 min

24 mm

Wait for 5 minute(s)

reaction time.

Add AMMONIA No.

1 tablet .

Crush tablet(s) by rotating

slightly.

Urea T / M391

ENMethod Reference Book1.0 15

EN

24 mm

Add AMMONIA No.

2 tablet .

Crush tablet(s) by rotating

slightly.

Close vial(s).

Sample

Test

Dissolve tablet(s) by

inverting.

Place sample vial in the

sample chamber. Pay

attention to the positioning.

Press the TEST (XD:

START)button.

9

4

5

6

7

8

10

11 12

1

2

3

10 min

Wait for 10 minute(s)

reaction time.

Once the reaction period is finished, the measurement takes place automatically.

The result in mg/L Urea appears on the display.

Urea T / M391

ENMethod Reference Book1.016

EN

Chemical Method

Indophenol / Urease

i) high range by dilution | # including stirring rod, 10 cm

DE Methodenhandbuch 01/20

KS4.3 T

0,1 - 4 mmol/l KS4.3

Säure / Indikator

20

S:4.3

Instrumentspezifische Informationen

Der Test kann auf den folgenden Geräten durchgeführt werden. Zusätzlich sind die

benötigte Küvette und der Absorptionsbereich der Photometer angegeben.

Geräte Küvette λMessbereich

MD 200, MD 600, MD 610,

MD 640, MultiDirect, PM 620,

PM 630

ø 24 mm 610 nm 0,1 - 4 mmol/l KS4.3

SpectroDirect, XD 7000,

XD 7500

ø 24 mm 615 nm 0,1 - 4 mmol/l KS4.3

Material

Benötigtes Material (zum Teil optional):

Reagenzien Form/Menge Bestell-Nr.

Alka-M-Photometer Tablette / 100 513210BT

Alka-M-Photometer Tablette / 250 513211BT

Anwendungsbereich

• Abwasserbehandlung

• Trinkwasseraufbereitung

• Rohwasserbehandlung

Anmerkungen

1. Die Begrie Alkalität-m, m-Wert, Gesamtalkalität und Säurekapazität KS4.3 sind

identisch.

2. Die exakte Einhaltung des Probevolumens von 10 ml ist für die Genauigkeit des

Analysenergebnisses entscheidend.

Displayanzeige

im MD 100 MD 110

/ MD 200

Barcode zur

Methodenerkennung

Methoden Name

Messbereich

Chemische

Methode

Methodennummer

Sprachkürzel nach

ISO 639-1 Revisionsstand

KS4.3 T / 20

Leitfaden für den Anwender

ENMethod Reference Book18

DE

Durchführung der Bestimmung Säurekapazität KS4.3 mit Tablette

Die Methode im Gerät auswählen.

Für diese Methode muss bei folgenden Geräten keine ZERO-Messung durchgeführt

werden: XD 7000, XD 7500

10 ml

24-mm-Küvette mit 10 ml

Probe füllen.

Küvette(n) verschließen.

Sample

Die Probenküvette in

den Messschacht stellen.

Positionierung beachten.

Tablette(n) durch Um-

schwenken lösen.

Sample

Die Probenküvette in

den Messschacht stellen.

Positionierung beachten.

Test

Taste TEST (XD: START)

drücken.

In der Anzeige erscheint das Ergebnis als Säurekapazität KS4.3.

Durchführung der

Messung

KS4.3 T / 20

DE Methodenhandbuch 01/20

Leitfaden für den Anwender

ENMethod Reference Book 19

DE

Harnstoff T / M390

DEMethod Reference Book1.020

DE

Harnstoff T M390

0,1 - 2,5 mg/L Urea Ur1

Indophenol / Urease

Material

Benötigtes Material (zum Teil optional):

Reagenzien Form/Menge Bestell-Nr.

UREA Reagenz 1 15 mL 459300

UREA Reagenz 2 10 mL 459400

Ammonia No. 1 Tablette / 100 512580BT

Ammonia No. 1 Tablette / 250 512581BT

Ammonia No. 2 Tablette / 100 512590BT

Ammonia No. 2 Tablette / 250 512591BT

Set Ammonia No. 1/No. 2#je 100 517611BT

Set Ammonia No. 1/No. 2#je 250 517612BT

Ammonium Konditionierpulver Pulver / 26 g 460170

Urea Pretreat (eliminiert die Störung von freiem

Chlor bis zu 2 mg/l)

Tablette / 100 516110BT

UREA Reagenzien Set 1 Satz 517800BT

Vorbereitung

1. Die Probentemperatur sollte zwischen 20 °C und 30 °C liegen.

2. Die Analyse spätestens eine Stunde nach der Probennahme durchführen.

3. Bei der Analyse von Meerwasserproben muss vor Zugabe der Ammonia No. 1

Tablette zwei Messlöffel Ammonium Konditionierungs-Pulver zur Probe gegeben

und durch Schwenken aufgelöst werden.

Anmerkungen

1. Die AMMONIA No. 1 Tablette löst sich erst vollständig nach Zugabe der AMMONIA

No. 2 Tablette auf.

2. Ammonium und Chloramine werden bei der Harnstoffbestimmung miterfasst.

Harnstoff T / M390

DEMethod Reference Book1.0 21

DE

Durchführung der Bestimmung Harnstoff mit Tablette und

Flüssigreagenz

Die Methode im Gerät auswählen.

10 mL

Sample

24-mm-Küvette mit 10 mL

Probe füllen.

Küvette(n) verschließen. Die Probenküvette in

den Messschacht stellen.

Positionierung beachten.

Zero

Taste ZERO drücken. Küvette aus dem

Messschacht nehmen.

24 mm

Bei Anwesenheit von

freiem Chlor (HOCl)

eine UREA PRETREAT

Tablette zugeben.

Tablette(n) unter leichter

Drehung zerdrücken.

Küvette(n) verschließen.

La page charge ...

Lovibond 00386452 - MD1x0/200 - Urea T Manuel utilisateur

Lovibond 00386452 - MD1x0/200 - Urea T Manuel utilisateur

dans d''autres langues

Documents connexes