LG 39LN5700 Le manuel du propriétaire

www.lg.comP/NO : MFL67690903 (1302-REV00)

Please read this manual carefully before operating

your set and retain it for future reference.

32LN5700

39LN5700

42LN5700

47LN5700

50LN5700

55LN5700

60LN5700

32LN570B 32LN5750

39LN5750

42LN5750

47LN5750

50LN5750

55LN5750

60LN5750

47LN5790

55LN5790

OWNER’S MANUAL

LED TV

* LG LED TV applies LCD screen with LED backlights.

ENGLISH

2

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your

product.



Do not use this apparatus near water.

Short-circuit

Breaker

Power Supply



Clean only with a dry cloth.

Short-circuit

Breaker

Power Supply



Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Short-circuit

Breaker

Power Supply



Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Short-circuit

Breaker

Power Supply



Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet (Can differ by

country).

Short-circuit

Breaker

Power Supply



Do not press strongly upon the panel with a hand or

a sharp object such as a nail, pencil or pen, or make

a scratch on it.

Short-circuit

Breaker

Power Supply

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of

uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may be

seriously injured or there is a possibility of accident

or death.

CAUTION

If you ignore the caution message, you may be

slightly injured or the product may be damaged.

NOTE

The note helps you understand and use the product

safely. Please read the note carefully before using

the product.

Short-circuit

Breaker

Power Supply

ENGLISH

3

IMPORTANT SAFETY INSTRUCTIONS



Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the

apparatus.

Short-circuit

Breaker

Power Supply



Only use attachments/accessories specified by the

manufacturer.

Short-circuit

Breaker

Power Supply



Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

Short-circuit

Breaker

Power Supply



Unplug this apparatus during lightning storms or

when unused for long periods of time.

Short-circuit

Breaker

Power Supply



Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

Short-circuit

Breaker

Power Supply



Do not stick metal objects or any other conductive

material into the power cord. Do not touch the end

of the power cord while it is plugged in.



Keep the packing anti-moisture material or vinyl

packing out of the reach of children. Anti-moisture

material is harmful if swallowed. If swallowed

by mistake, force the patient to vomit and visit

the nearest hospital. Additionally, vinyl packing

can cause suffocation. Keep it out of the reach of

children.



CAUTION concerning the Power Cord

(Can differ by country):

It is recommended that appliances be placed upon a

dedicated circuit; that is, a single outlet circuit which

powers only that appliance and has no additional

outlets or branch circuits. Check the specification

page of this owner’s manual to be certain. Do

not connect too many appliances to the same AC

power outlet as this could result in fire or electric

shock. Do not overload wall outlets. Overloaded

wall outlets, loose or damaged wall outlets,

extension cords, frayed power cords, or damaged or

cracked wire insulation are dangerous. Any of these

conditions could result in electric shock or fire.

Periodically examine the cord of your appliance, and

if its appearance indicates damage or deterioration,

unplug it, discontinue use of the appliance, and have

the cord replaced with an exact replacement part

by an authorized service. Protect the power cord

from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall outlets,

and the point where the cord exits the appliance. Do

not move the TV with the power cord plugged in.

Do not use a damaged or loose power cord. Be sure

do grasp the plug when unplugging the power cord.

Do not pull on the power cord to unplug the TV.

Short-circuit

Breaker

Power Supply



Warning

- To reduce the risk of fire or electrical

shock, do not expose this product to rain, moisture

or other liquids. Do not touch the TV with wet

hands. Do not install this product near flammable

objects such as gasoline or candles, or expose the

TV to direct air conditioning.

Short-circuit

Breaker

Power Supply



Do not expose to dripping or splashing and do not

place objects filled with liquids, such as vases, cups,

etc. on or over the apparatus (e.g. on shelves above

the unit).

Short-circuit

Breaker

Power Supply

ENGLISH

4

IMPORTANT SAFETY INSTRUCTIONS



Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground wire to

prevent possible electric shock (i.e. a TV with a

three-prong grounded AC plug must be connected

to a three-prong grounded AC outlet). If grounding

methods are not possible, have a qualified

electrician install a separate circuit breaker. Do not

try to ground the unit by connecting it to telephone

wires, lightening rods, or gas pipes.

Short-circuit

Breaker

Power Supply



As long as this unit is connected to the AC wall

outlet, it is not disconnected from the AC power

source even if the unit is turned off.



Do not attempt to modify this product in any way

without written authorization from LG Electronics.

Unauthorized modification could void the user’s

authority to operate this product.



Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the

precautions below. An outdoor antenna system

should not be located in the vicinity of overhead

power lines or other electric light or power circuits,

or where it can come in contact with such power

lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded so as to

provide some protection against voltage surges

and built-up static charges. Section 810 of the

National Electrical Code (NEC) in the U.S.A. provides

information with respect to proper grounding of the

mast and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Short-circuit

Breaker

Power Supply

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code



Cleaning

When cleaning, unplug the power cord and wipe

gently with a soft cloth to prevent scratching. Do

not spray water or other liquids directly on the TV

as electric shock may occur. Do not clean with

chemicals such as alcohol, thinners or benzine.



Moving

Make sure the product is turned off, unplugged

and all cables have been removed. It may take 2 or

more people to carry larger TVs. Do not press or put

stress on the front panel of the TV.



Ventilation

Install your TV where there is proper ventilation. Do

not install in a confined space such as a bookcase.

Do not cover the product with cloth or other

materials while plugged. Do not install in excessively

dusty places.



If you smell smoke or other odors coming from

the TV, unplug the power cord and contact an

authorized service center.



Keep the product away from direct sunlight.



Never touch this apparatus or antenna during a

thunder or lightning storm.



When mounting a TV on the wall, make sure not

to install the TV by hanging the power and signal

cables on the back of the TV.



Do not allow an impact shock or any objects to fall

into the product, and do not drop anything onto the

screen.



Disconnecting the Main Power

The power outlet used with this device must remain

easily accessible.



Store the accessories (battery, etc.) in a safe

location out of the reach of children.



This apparatus use batteries. In your community

there might be regulations that require you

to dispose of these batteries properly due to

environmental considerations. Please contact your

local authorities for disposal or recycling information.



Do not dispose of batteries in a fire.



Do not short circuit, disassemble or allow the

batteries to overheat.

ENGLISH

5

IMPORTANT SAFETY INSTRUCTIONS



Dot Defect

The Plasma or LCD panel is a high technology

product with resolution of two million to six million

pixels. In a very few cases, you could see fine dots

on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the

performance and reliability of the TV.



Generated Sound

“Cracking” noise: A cracking noise that occurs

when watching or turning off the TV is generated by

plastic thermal contraction due to temperature and

humidity. This noise is common for products where

thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level

noise is generated from a high-speed switching

circuit, which supplies a large amount of current

to operate a product. It varies depending on the

product.

This generated sound does not affect the

performance and reliability of the product.



Take care not to touch the ventilation openings.

When watching the TV for a long period, the

ventilation openings may become hot. This does

not affect the performance of the product or cause

defects in the product.



If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on. This is normal,

there is nothing wrong with TV. Some minute dot

defects may be visible on the screen, appearing as

tiny red, green, or blue spots. However, they have

no adverse effect on the TV’s performance. Avoid

touching the LCD screen or holding your finger(s)

against it for long periods of time. Doing so may

produce some temporary distortion effects on the

screen.

Preventing “Image burn” or “Burn-in” on your TV

screen



If a fixed image displays on the TV screen for a long

period of time, it will be imprinted and become a

permanent disfigurement on the screen. This is

“image burn” or “burn-in” and not covered by the

warranty.



If the aspect ratio of the TV is set to 4:3 for a

long period of time, image burn may occur on the

letterboxed area of the screen.



Avoid displaying a fixed image on the TV screen for

a long period of time (2 or more hours for LCD, 1

or more hours for the Plasma TV) to prevent image

burn.

For USA and Canada

FCC NOTICE

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to radio

or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the

equipment and the receiver.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference

and (2) this device must accept any interference

received, including interference that may cause

undesired operation of the device.

Any changes or modifications in construction of

this device which are not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guidelines

for proper grounding and, in particular, specifies

that the cable ground shall be connected to the

grounding system of the building, as close to the

point of the cable entry as practical.

ENGLISH

6

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit ‘www.lg.com’.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are

trademarks or registered trademarks of HDMI Licensing LLC in the United States and other

countries.

ABOUT DIVX VIDEO: DivX

®

is a digital video format created by DivX, LLC, a subsidiary of Rovi

Corporation. This is an official DivX Certified

®

device that plays DivX video. Visit divx.com for

more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified

®

device must be registered in order to

play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate

the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on

how to complete your registration.

“DivX Certified

®

to play DivX

®

video up to HD 1080p, including premium content.”

“DivX

®

, DivX Certified

®

and associated logos are trademarks of Rovi Corporation or its

subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents:

7,295,673; 7,460,668; 7,515,710; 7,519,274”

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other

U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and the Symbol

together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS, Inc. Product

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product,

please visit ‘http://opensource.lge.com’.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for

download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such

distribution (such as the cost of media, shipping and handling) upon email request to ‘[email protected]’. This offer

is valid for three (3) years from the date on which you purchased the product.

ENGLISH

7

TABLE OF CONTENTS

2 IMPORTANT SAFETY INSTRUCTIONS

6 LICENSES

6 OPEN SOURCE SOFTWARE NOTICE

7 TABLE OF CONTENTS

8 INSTALLATION PROCEDURE

8 ASSEMBLING AND PREPARING

8 Unpacking

10 Optional Extras

11 Parts and Buttons

12 Lifting and moving the TV

13 Setting up the TV

13 - Attaching the stand

14 - Mounting on a table

15 - Tidying cables

16 - Mounting on a wall

17 MAKING CONNECTIONS

17 Connecting to an antenna or cable

18 Connecting to a HD receiver, DVD Player, or

VCR

18 - HDMI Connection

19 - DVI to HDMI Connection

20 - Connecting to a mobile phone

21 - Component Connection

22 - Composite Connection

23 Connecting to a PC

23 - HDMI Connection or DVI to HDMI

Connection

25 Connecting to an Audio System

25 - Digital Optical Audio Connection

26 Connecting to a Sound Bar

26 - Digital Optical Audio Connection

27 Connecting Headphones

27 Connecting a USB Drive

28 REMOTE CONTROL

30 MAGIC REMOTE CONTROL

FUNCTIONS

31 Registering Magic Remote Control

31 How to use Magic Remote Control

31 Precautions to Take when Using the Magic

Remote Control

32 WATCHING TV

32 Turning the TV on for the first time

33 USING THE USER GUIDE

34 SPECIFICATIONS

37 EXTERNAL CONTROL DEVICE SETUP

38 MAINTENANCE

38 Cleaning Your TV

38 - Screen, frame, cabinet and stand

38 - Power cord

38 TROUBLESHOOTING



Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may differ

slightly from that shown in this manual.



The available menus and options may differ from

the input source or product model that you are

using.



New features may be added to this TV in the

future.

NOTE

ENGLISH

8

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

1

Open the package and make sure all the accessories are included.

2

Attach the stand to the TV set.

3

Connect an external device to the TV set.

4

Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you

purchased your product. The illustrations in this manual may differ from the actual product and item.



Do not use any unapproved items to ensure the safety and product life span.



Any damages or injuries by using unapproved items are not covered by the warranty.



In case of some model, the thin film on screen is a part of TV, So don’t take it off.

CAUTION



The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to upgrade of product

functions.



For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick

and 18 mm (0.7 inches) width.



Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s

USB port.

B

A

B

*A 10 mm (0.39 inches)

*B 18 mm (0.7 inches)

NOTE

ENGLISH

9

ASSEMBLING AND PREPARING

(For LN5700,

LN570B, LN5790 series) (For LN5750 series)

Remote Control, Batteries (AAA)

(See p. 28)

Magic Remote Control,

Batteries (AA)

(See p. 30)

Owner’s Manual

Stand Body , Stand Base

(See p. 13)

Power Cord

Stand Screws

3 EA, P5 x 25

4 EA, M4 x 14

(See p. 13)

(For 32/39/42/47/50/60LN5700,

32LN570B,

32/39/42/47/50/60LN5750,

47LN5790) (For LN5790 series)

Desk-mount Screw

(See p. 14)

Cable Holder

(See p. 15)

Sound Bar

(See p. 26)

ENGLISH

10

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

These devices only work with certain models.

The model name or design may be changed due to the manufacturer’s circumstances or policies.

AN-MR400

Magic Remote

AN-VC4**

Video Call Camera

LG Audio Device

Tag On

ENGLISH

11

ASSEMBLING AND PREPARING

Parts and Buttons

Button Description

/ (^ / v)

Scrolls through the saved channels.

/ (+ / -)

Adjusts the volume level.

(OK

⊙

)

Selects the highlighted menu option or confirms an input.

(SETTINGS)

Accesses the main menus, or saves your input and exits the menus.

(INPUT )

Changes the input source.

(

ꔰ

/ I)

Turns the power on or off.

1

Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

SETTINGS

INPUT

OK

COMPONENT IN / AV IN

VIDEO/

ANTENNA

IN /

CABLE IN

PB PR

Y

IN

1

R

AUDIO

L/MONO

OPTICAL

DIGITAL

AUDIO OUT

Buttons

Screen

Speakers

Remote control Sensor and

Intelligent Sensor

1

Power Indicator

ENGLISH

12

ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to

prevent the TV from being scratched or damaged and for

safe transportation regardless of its type and size.



Avoid touching the screen at all times, as this may

result in damage to the screen.

CAUTION



It is recommended to move the TV in the box or

packing material that the TV originally came in.



Before moving or lifting the TV, disconnect the

power cord and all cables.



When holding the TV, the screen should face away

from you to avoid damage.



Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part, speaker,

or speaker grill area.



When transporting a large TV, there should be at

least 2 people.



When transporting the TV by hand, hold the TV as

shown in the following illustration.



When transporting the TV, do not expose the TV to

jolts or excessive vibration.



When transporting the TV, keep the TV upright,

never turn the TV on its side or tilt towards the left

or right.

ENGLISH

13

ASSEMBLING AND PREPARING

Setting up the TV

The TV can be mounted to a wall or the stand can be attached if the TV will be positioned on an entertainment center or

stand.

Attaching the stand

If you are not mounting the TV to a wall, use the following instructions to attach the stand.



When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to

protect the screen from scratches.



Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward

after being installed.)



Do not tighten the screws with too much force; otherwise they may be damaged and come loose later.

CAUTION



Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

NOTE

3

Stand Body

Stand Base

Front

1

3 EA

P5 x 25

4 EA

M4 x 14

2

ENGLISH

14

ASSEMBLING AND PREPARING

Mounting on a table

1

Lift and tilt the TV into its upright position on a table.

- Leave a

10 cm (4 inch) (minimum)

space from

the wall for proper ventilation.

10 cm

(4 inches)

2

Connect the power cord to a wall outlet.



Do not place the TV near or on sources of heat, as

this may result in fire or other damage.

CAUTION

Securing the TV to a table

(For 32/39/42/47/50/60LN5700, 32LN570B,

32/39/42/47/50/60LN5750, 47LN5790)

Fix the TV to a table to prevent from tilting forward,

damage, and potential injury.

Mount the TV on a table, and then insert and tighten the

supplied screw on the rear of the stand.



To prevent TV from falling over, the TV should be

securely attached to the floor/wall per installation

instructions. Tipping, shaking, or rocking the TV

may cause injury.

WARNING

Using the Kensington security system (optional)

(Depending on model)

The Kensington security system connector is located at

the rear of the TV.

For more information of installation and using, refer

to the manual provided with the Kensington security

system or visit http://www.kensington.com.

Connect the Kensington security system cable between

the TV and a table.



The Kensington security system is optional. You

can obtain additional accessories from your local

dealer.

NOTE

ENGLISH

15

ASSEMBLING AND PREPARING

Securing the TV to a wall (optional)

(Depending on model)

1

Insert and tighten the eye-bolts, or TV brackets and

bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts position,

remove the bolts first.

2

Mount the wall brackets with the bolts to the wall.

Match the location of the wall bracket and the eye-

bolts on the rear of the TV.

3

Connect the eye-bolts and wall brackets tightly with

a sturdy rope.

Make sure to keep the rope horizontal with the flat

surface.



Make sure that children do not climb on or hang on

the TV.

CAUTION



Use a platform or cabinet that is strong and large

enough to support the TV securely.



Brackets, bolts and ropes are optional. You can

obtain additional accessories from your local dealer.

NOTE

Tidying cables

1

Gather and bind the cables with the cable holder.

Cable holder



Do not move the TV by holding the cable holder,

as the cable holders may break, and injuries and

damage to the TV may occur.

CAUTION

ENGLISH

16

ASSEMBLING AND PREPARING

Mounting on a wall

An optional wall mount can be used with your LG

Television. Consult with your local dealer for a wall

mount that supports the VESA standard used by your

TV model. Carefully attach the wall mount bracket at the

rear of the TV. Install the wall mount bracket on a solid

wall perpendicular to the floor. If you are attaching the

TV to other building materials, please contact qualified

personnel to install the wall mount. Detailed instructions

will be included with the wall mount. We recommend

that you use an LG brand wall mount.

10 cm

(4

in

ch

e

s)

Make sure to use screws and wall mounts that meet the

VESA standard. Standard dimensions for the wall mount

kits are described in the following table.

Model 32LN5700

32LN570B

32LN5750

39/42LN5700

39/42LN5750

VESA (A x B)

A

B

200 x 100 200 x 200

Standard screw M4 M6

Number of screws 4 4

Wall mount bracket

(optional)

LSW130B LSW230B

Model 47/50/55/60LN5700

47/50/55/60LN5750

47/55LN5790

VESA (A x B)

A

B

400 x 400

Standard screw M6

Number of screws 4

Wall mount bracket

(optional)

LSW430B



Disconnect the power before moving or installing

the TV. Otherwise electric shock may occur.



If you install the TV on a ceiling or slanted wall, it

may fall and result in severe injury.

Use an authorized LG wall mount and contact the

local dealer or qualified personnel.



Do not over tighten the screws as this may cause

damage to the TV and void your warranty.



Use the screws and wall mounts that meet the

VESA standard. Any damages or injuries by misuse

or using an improper accessory are not covered by

the warranty.

CAUTION



Use the screws that are listed in the VESA

standard screw specifications.



The wall mount kit includes an installation manual

and necessary parts.



The wall mount bracket is optional. You can obtain

additional accessories from your local dealer.



The length of screws may differ depending on the

wall mount. Make sure to use the proper length.



For more information, refer to the manual supplied

with the wall mount.

NOTE

ENGLISH

17

MAKING CONNECTIONS



This section uses illustrations of the LN5790 series.

You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs,

audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external

device’s connection, refer to the manual provided with each device.



If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the

TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the

connected device.



The external device connections shown may differ slightly from illustrations in this manual.



Connect external devices to the TV regardless of the order of the TV port.



If you connect a gaming device to the TV, use the cable supplied with the gaming device.



Refer to the external equipment’s manual for operating instructions.

NOTE

Connecting to an antenna or cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from

the actual items and a RF cable is optional.



Make sure not to bend the copper wire of the RF

cable.

Copper wire



Complete all connections between devices, and

then connect the power cord to the power outlet

to prevent damage to your TV.

CAUTION



Use a signal splitter to use more than 2 TVs.



Visit ‘http://lgknowledgebase.com’ for more

information about the antenna and cable

connection. Search for antenna.



DTV Audio Supported Codec: MPEG, Dolby Digital.

NOTE

ANTENNA/

CABLE IN

ANTENNA/

CABLE IN

Antenna

VHF Antenna

UHF Antenna

Coaxial (75Ω)

Terminal

(*Not Provided)

ENGLISH

18

MAKING CONNECTIONS

Connecting to a HD receiver, DVD Player, or VCR

Connect a HD receiver, DVD Player, or VCR to the TV and select an appropriate input mode.

HDMI Connection

HDMI is the best way to connect a device.

Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV

with the HDMI cable as shown in the following illustration.



Use the latest High Speed HDMI™ Cable that supports CEC (Customer Electronics Control) function.



High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.



HDMI Audio Supported Format: Dolby Digital, PCM (Up to 192 KHz, 32k/44.1k/48k/88k/96k/176k/192k), DTS.

NOTE

IN

1

(ARC)

IN

3

(MHL)

IN

2

HDMI

DVD / Blu-Ray / HD Cable Box / HD STB

Choose any HDMI input port to connect.

It does not matter which port you use.

(*Not Provided)

ENGLISH

19

MAKING CONNECTIONS

DVI to HDMI Connection

Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the

DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.



When using the HDMI/DVI cable, Single link is only supported.

NOTE

Choose any HDMI input port to connect.

It does not matter which port you use.

IN

1

(ARC)

IN

3

(MHL)

IN

2

PC-AUDIO IN

COMPONENT IN / AV IN

P

B

P

R

V

IDE

O

/

Y

L/MONO

AUDIO R

AUDIO OUT

DVI OUT

(*Not Provided)

DVD / Blu-Ray / HD Cable Box

WHITE

RED

ENGLISH

20

MAKING CONNECTIONS

Connecting to a mobile phone

Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to

television sets.



Connect the mobile phone to the HDMI IN 3 (MHL) port to view the phone screen on the TV.



This only works for the MHL-enabled phone.



With some MHL supporting mobile phones, you can use the TV remote to control the phone.



An MHL passive cable is needed to connect the TV and a mobile phone.



Remove the MHL cable from the TV when:

- the MHL function is disabled.

- your mobile device is fully charged in standby mode.

NOTE

IN

3

(MHL)

(*Not Provided)

MHL Cable

Mobile phone

La page charge ...

LG 39LN5700 Le manuel du propriétaire

Ce manuel convient également à

LG 39LN5700 Le manuel du propriétaire

dans d''autres langues

Documents connexes