Pepperl+Fuchs TAB-EX03-DZ1-WWANANZ-CS-000-.. Manuel utilisateur

1

Operating Instructions | Betriebsanleitung

Instructions d‘utilisation | Istruzioni per l‘uso

Instrucciones de uso | Instruções de funcionamento

Tab-Ex® 03 DZ1

ZONE 1 / 21

2

English Page 3

Deutsch Seite 25

Français Page 48

Italiano Page 72

Español Página 94

Portoguês Sida 116

3

Content

1. Application ....................................................................................................................4

2. Safety precautions .......................................................................................................4

3. Radiation Exposure Statement ..................................................................................... 4

4. Band and mode ............................................................................................................ 5

5. Repair ........................................................................................................................... 5

6. Charging the tablet computer .......................................................................................5

7. Safety precautions for the battery .................................................................................6

8. Cleaning, maintenance and storage .............................................................................6

9. Disposal ........................................................................................................................7

10. Warranty and liability ..................................................................................................7

11. Device layout and functions ........................................................................................8

Note:

The current Operating Instructions, Ex-Safety Instructions, EU Declaration of Conformity

and the Certicate of Conformity can be downloaded from the relevant product page at

www.ecom-ex.com, or alternatively they can be requested directly from the manufacturer.

4

1. Application

The Tab-Ex® 03 is an intrinsically safe Zone 1 / Zone 21 water-, dust- and impact resis-

tant tablet computer for industrial application in hazardous areas with gaseous and dust

atmospheres according to ATEX Directive 2014/34/EU and the IECEx System.

2. Safety precautions

These safety instructions contain information and safety regulations which are to be

observed. Non-observance of this information and these instructions can have serious

consequences and may violate regulations. Please read these safety instructions

carefully before starting to use the device. In the event of conicting information the

details specied in the safety instructions shall apply. In case of any doubt (in the form

of translation or printing errors) the English version shall apply.

3. Radiation Exposure Statement

l Warning: This equipment complies with International Commission on Non-Ionizing

Radiation Protection (ICNIRP), IEEE C95.1, Federal Communications Commission

Ofce of Engineering and Technology (OET) Bulletin 65 and European Committee

for Electrotechnical Standardization (CENELEC) EN62311 limits for exposure to radio

frequency (RF) radiation.

3.1 SAR values for European countries:

The SAR values below are only for devices developed for use in European countries.

The SAR limit is 2.0 W/kg.

Maximum SAR for this model and conditions under which it was recorded:

Body-worn SAR: 1.390 W/kg

Head SAR: 1.091 W/kg

3.2 SAR values for USA:

The SAR values below are only for devices developed for use in USA.

The SAR limit is 1.6 W/kg.

Maximum SAR for this model and conditions under which it was recorded:

Body-worn SAR: 1.390 W/kg

Simultaneous Transmission: 1.58 W/kg

5

4. Band and mode

Band and mode Output power

EGSM900 33 dBm

DCS1800 30 dBm

WCDMA 900/2100 24 dBm

LTE 1/3/7/8/20/28/38/40 23 dBm

Wi-Fi 2.4 GHz 20 dBm

Bluetooth 2.4 GHz 20 dBm

Wi-Fi 5.1-5.7 GHz 23 dBm

Wi-Fi 5.8 GHz 25 mW

NFC 13.56 MHz 42 dBuA/m at 10 m

The use of WLAN band is restricted to indoor use only. This restriction will be applied in

all EU member states.

AT BE BG CH CY CZ DE DK EE ES EL

FI FR HR HU IE IS IT LI LT LU LV

MT NL NO PL PT RO SE SI SK TR UK

5. Repair

Repairs are to be conducted by ECOM Instruments GmbH or by personnel or service

centers authorized by ECOM Instruments GmbH only, due to the safety of the device

needs to be tested after repairs are implemented. The actual repair report sheet can be

downloaded from the service area at

www.ecom-ex.com.

6. Charging the tablet computer

Charging the tablet computer is allowed only outside hazardous areas!

The battery of the tablet computer is delivered not fully charged. It is recommended to

charge the tablet computer’s battery for ve hours before using it for the rst time. The

full capacity of the battery is reached after 3 - 4 complete charge / discharge cycles.

Note:

•

There is a risk of explosion if the device is exposed to a ame.

•

Only use ECOM-approved chargers.

6

Due to EX-relevant safety, the battery cover is sealed and may only be opened by

ECOM service personnel. Likewise, battery replacement may only be carried out by

these personnel.

7. Safety precautions for the battery

Damaged chargers should be removed from use and sent to ECOM Instruments GmbH

for inspection.

Note:

•

Extreme temperatures can have an adverse effect on charging the battery.

•

Do not dispose of the device in a re.

•

Dispose of the device in accordance with local regulations and not with normal house-

hold waste.

A high quality lithium-ion battery is used in your Tab-Ex® 03. These batteries have

numerous advantages in everyday use, such as a low weight and high capacity in a

nevertheless compact construction. In addition these batteries also exhibit practically

no memory effect. However, these batteries are susceptible to a natural aging process

which impairs their functionality.

Modern batteries today have a lifespan of around 500 charge cycles, which, when used

daily, corresponds to a service life of approximately two years. The ageing process in-

creases rapidly after this period, which means that the batteries are deemed technically

defective after 500 charge cycles. Moreover, the battery cells could expand and cause

irreparable damage to your device in a worst case scenario. For this reason recharge-

able batteries with lithium cells should be replaced after two years at the latest or after

reaching a battery capacity that is 50% of its initial value.

Note:

The battery used in this unit poses a re hazard and can cause chemical injuries if it is

used improperly. Neither the battery nor the battery cells should be opened or disas-

sembled and they should not be burned or exposed to temperatures exceeding 60 °C.

8. Cleaning, maintenance and storage

•

Only use a suitable cloth or sponge to clean the tablet computer.

•

Do not use any solvents or abrasive cleaning agents when cleaning.

•

It is recommended that you have the functionality and accuracy of the phone

inspected by the manufacturer every two years.

•

Do not exceed the permissible storage temperature range of -20 °C to +50 °C

7

9. Disposal

Old electrical devices by ECOM Instruments GmbH or Pepperl+Fuchs SE will be

directed to disposal at our expense and disposed of free of charge in accordance

with European Directive 2012/19/EC. Please follow local regulations for the

disposal of electronic products. The costs associated with returning devices to

ECOM Instruments GmbH or Pepperl+Fuchs SE are to be borne by the sender.

Old electrical devices should not be disposed of along with normal or household waste.

Dispose of batteries in accordance with European Directive 2006/66/EC. Batteries

should not be disposed of with normal or household waste. Disposal can be done via

appropriate collection points in your country.

Note: The battery used in this unit poses a re hazard and can cause chemical injuries

if it is used improperly. Neither the battery nor the battery cells should be opened or

disassembled and they should not be burned or exposed to temperatures exceeding

70 °C. The disposal regulations specied above are also applicable for old devices.

10. Warranty and liability

The warranty of this product follows the General Conditions of Delivery and Payment of

ECOM Instruments GmbH, which are available at www.ecom-ex.com, or alternatively

they can be requested directly from the manufacturer.

This warranty can be extended by the optional Service Level Agreement.

8

11. Device layout and functions

Package contents

Refer to the quick start guide for package contents.

• The items supplied with the device and any available accessories may vary

depending on the region or service provider.

• The supplied items are designed only for this device and may not be compatible

with other devices.

• Appearances and specications are subject to change without prior notice.

• You can purchase additional accessories from your local ECOM retailer.

Make sure they are compatible with the device before purchase.

• Use only ECOM-approved accessories. Using unapproved accessories may cause

the performance problems and malfunctions that are not covered by the warranty.

• For more information about available accessories, refer to the ECOM website.

9

Device layout (SM-T575 / SM-T577 / SM-T570)

Recents key

Home key

Back key

Multipurpose

jack

(USB Type-C)

Front camera

Volume key +

Volume key -

Side key

(Power/Bixby)

Active key

Touchscreen

Stylus S Pen

10

Device layout (SM-T575 / SM-T577 / SM-T570)

GPS antenna

NFC antenna

Rear camera

Flash

Feature camera

Microphone

Labels

indicating

usage and

warnings

Multipurpos jack (USB Type-C)

11

The Tab-Ex® 03 is based on the Samsung tablet SM-T57x.

We do not make any changes to the operating system.

You will therefore receive software updates directly from Samsung (via OTA).

You can obtain the latest security information at https://security.samsungmobile.com/

• When using the speakers, such as when playing media les or using speakerphone,

do not place the device close to your ears.

• Be careful not to expose the camera lens to a strong light source, such as direct

sunlight. If the camera lens is exposed to a strong light source, such as direct

sunlight, the camera image sensor may be damaged. A damaged image sensor is

irreparable and will cause dots or spots in pictures.

• If you use the device with its glass or acrylic body broken, there may be a risk of

injury. Use the device only after it has been repaired at a ECOM Service Centre.

• If dust or foreign materials enter the microphone, speaker, or receiver, the device’s

sound may become quiet or certain features may not work. If you attempt to

remove the dust or foreign materials with a sharp object, the device may be

damaged and its appearance may be affected.

• Connectivity problems and battery drain may occur in the following situations:

– If you attach metallic stickers on the antenna area of the device

– If you attach a device cover made with metallic material to the device

– If you cover the device’s antenna area with your hands or other objects while

using certain features, such as calls or the mobile data connection (SM-T575,

SM-T577)

• Unapproved screen protectors may cause the sensors to malfunction.

• Do not cover the light sensor area with screen accessories, such as a screen

protector, stickers, or a cover. Doing so may cause the sensor to malfunction.

Loudspeaker

12

Hard keys

Key Function

Volume key • Press to adjust the device volume.

Side key

Power/Bixby

• When the device is off, press and hold to turn it on.

• Press to turn on or lock the screen.

• Press and hold to start a conversation with Bixby.

Refer to Using Bixby for more information.

•

Press twice or press and hold to launch the app or feature you set.

Side key +

Volume Down key

• Press simultaneously to capture a screenshot.

• Press and hold simultaneously to turn off the device.

Active key • Press or press and hold to launch preset apps.

Recents key • Press to open the list of recent apps.

Home key • Press to turn on the screen while the screen is locked.

• Press to return to the Home screen.

• Press and hold to launch Google Assistant app.

Back key • Press to return to the previous screen.

Home key

Recents key Back key

Volume key +

Volume key -

Side key

(Power/Bixby)

Active key

13

Setting the Side key

Select an app or feature to launch by pressing the Side key twice or pressing and

holding the Side key.

Launch the Settings app, tap Advanced features → Side key, and then select an option

you want.

S Pen

S Pen button

S Pen nib

Name Functions

S Pen nib • Use the S Pen to write, draw, or perform touch actions on the

screen.

• Hover the S Pen over items on the screen to access additional

S Pen features, such as the Air view feature.

S Pen button • Hover the S Pen over the screen and press the S Pen button to

display the Air command features.

• While pressing and holding the S Pen button, drag the S Pen over

items to select them.

Replacing the S Pen nib

If the nib is dull, replace it with a new one.

1 Firmly hold the nib with the tweezers and remove it.

2 Insert a new nib into the S Pen.

14

Be careful not to pinch your ngers with the tweezers.

• Do not reuse old nibs. Doing so may cause the S Pen to malfunction.

• Do not press the nib excessively when inserting the nib into the S Pen.

• Do not insert the round end of the nib into the S Pen.

Doing so may cause damage to the S Pen or your device.

• Do not bend or apply excessive pressure with the S Pen while using it.

The S Pen may be damaged or the nib may be deformed.

• Do not hard press on the screen with the S Pen. The pen nib may be deformed.

• If you use the S Pen at sharp angles on the screen, the device may not recognise

the S Pen actions.

• If the S Pen is not working properly, take it to a ECOM Service Centre.

Battery

Charging the battery

Charge the battery before using it for the rst time or when it has been unused for

extended periods.

Use only ECOM-approved charger and cable specically designed for your device.

Incompatible charger and cable can cause serious injuries or damage to your device.

• Connecting the charger improperly may cause serious damage to the device.

Any damage caused by misuse is not covered by the warranty.

• Use only USB Type-C cable supplied with the device.

The device may be damaged if you use Micro USB cable.

15

To save energy, unplug the charger when not in use. The charger does not have a

power switch, so you must unplug the charger from the electric socket when not in

use to avoid wasting power. The charger should remain close to the electric socket

and easily accessible while charging.

1 Connect the USB cable to the USB power adaptor.

2 Plug the USB cable into the device’s multipurpose jack.

3 Plug the USB power adaptor into an electric socket.

4 After fully charging, disconnect the charger from the device.

Then, unplug the charger from the electric socket.

Reducing the battery consumption

Your device provides various options that help you conserve battery power.

• Optimise the device using the device care feature.

• When you are not using the device, turn off the screen by pressing the Side key.

• Activate power saving mode.

• Close unnecessary apps.

• Deactivate the Bluetooth feature when not in use.

• Deactivate auto-syncing of apps that need to be synced.

• Decrease the backlight time.

• Decrease the screen brightness.

16

Battery charging tips and precautions

• When the battery power is low, the battery icon appears empty.

• If the battery is completely discharged, the device cannot be turned on immediately

when the charger is connected. Allow a depleted battery to charge for a few minutes

before turning on the device.

• If you use multiple apps at once, network apps, or apps that need a connection to

another device, the battery will drain quickly. To avoid losing power during a data

transfer, always use these apps after fully charging the battery.

• Using a power source other than the charger, such as a computer, may result in a

slower charging speed due to a lower electric current.

• The device can be used while it is charging, but it may take longer to fully charge the

battery.

• If the device receives an unstable power supply while charging, the touchscreen may

not function. If this happens, unplug the charger from the device.

• While charging, the device and the charger may heat up. This is normal and should not

affect the device’s lifespan or performance. If the battery gets hotter than usual, the

charger may stop charging. If this occurs during wireless charging, disconnect the

device from the charger to let it cool down, then charge the device again later.

•

If you charge the device while the multipurpose jack is wet, the device may be damaged.

Thoroughly dry the multipurpose jack before charging the device.

• If the device is not charging properly, take the device and the charger to a ECOM

Service Centre.

Fast charging

The device has a built-in fast charging feature. You can charge the battery more quickly

while the device or its screen is turned off.

Increasing the charging speed

To increase the charging speed, turn the device or its screen off when you charge the

battery. If the fast charging feature is not activated, launch the Settings app, tap Device

care → Battery → Charging, and then tap the Fast charging switch to activate it.

• While charging, you cannot activate or deactivate this feature.

• You cannot use the built-in fast charging feature when you charge the battery

using a standard battery charger.

• If the device heats up or the ambient air temperature rises, the charging speed may

17

decrease automatically. This is a normal operating condition to prevent damage to

the device.

Installing the SIM or USIM card (nano-SIM card) => Tab-Ex03 DZ1 WWAN

• Use only a nano-SIM card.

• Use caution not to lose or let others use the SIM or USIM card. ECOM is not

responsible for any damages or inconveniences caused by lost or stolen cards.

Some services that require a network connection may not be available

depending on the service provider

STEP 1 Unscrew the two cover screws (Torx T8) in a counter clockwise direction and

remove the IP-Cover. Please use the screwdriver Torx T8 provided with the tablet.

STEP 2 Remove the IP Cover

18

To insert the nano-SIM card or USIM unscrew the two screws (Torx T8) of the tray in a

counter clockwise direction.

STEP 3 Loosen the two inner screws Torx T8 counterclockwise.

Please use the screwdriver Torx T8 provided with the tablet.

STEP 4 Pull out the tray gently from the tray slot.

Place the SIM or USIM card on the tray with the gold-coloured contacts facing

downwards. Gently press the SIM or USIM card into the tray to secure it.

19

If the card is not xed rmly into the tray, the SIM card may leave or fall out of the tray.

STEP 5 Insert the tray back into the tray slot.

If you insert the tray into your device while

the tray is wet, your device may be damaged.

Always make sure the tray is dry.

• Fully insert the tray into the tray slot to prevent liquid from entering your device.



Tighten the two screws (Torx T8) of the tray unit with a torque screwdriver to a torque

of 0.26 Nm.



Tighten the two screws (Torx T8) of the IP cover with a torque screwdriver to a

torque of 0.26 Nm.





Memory card (microSD card)

Installing a memory card

Your device’s memory card capacity may vary from other models and some memory

cards may not be compatible with your device depending on the memory card manu-

facturer and type. To view your device’s maximum memory card capacity, refer to the

ECOM website.

• Some memory cards may not be fully compatible with the device.

Using an incompatible card may damage the device or the memory card, or corrupt

the data stored in it.

• Use caution to insert the memory card right-side up.

20

• The device supports the FAT and the exFAT le systems for memory cards.

When inserting a card formatted in a different le system, the device will ask to refor-

mat the card or will not recognise the card. To use the memory card, you must format

it. If your device cannot format or recognise the memory card, contact the memory

card manufacturer or a ECOM Service Centre.

• Frequent writing and erasing of data shortens the lifespan of memory cards.

• When inserting a memory card into the device, the memory card’s le directory

appears in the My Files → SD card folder.

Tab-Ex03 DZ1 WWAN and Tab-Ex03 DZ1 WIFI



STEP 1 Unscrew the two cover screws (Torx T8) in a counter clockwise direction and

remove the IP-Cover. Please use the screwdriver Torx T8 provided with the tablet.

STEP 2 To insert the SD Card unscrew the two inner screws (Torx T8) of the tray in a

counter clockwise direction.

La page charge ...

Pepperl+Fuchs TAB-EX03-DZ1-WWANANZ-CS-000-.. Manuel utilisateur

Pepperl+Fuchs TAB-EX03-DZ1-WWANANZ-CS-000-.. Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents