Amana MHW5630HW Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

Ce manuel convient également à

If you have any problems or questions, visit us at www.maytag.com
Pour tout problème ou toute question, consulter le www.maytag.ca
Use & Care Guide
Guide d’utilisation et d’entretien
Para obtener acceso
al Manual de uso y cuidado
en español, o para obtener
información adicional acerca
de su producto, visite:
www.maytag.com
FRONT-LOADING AUTOMATIC WASHER
LAVEUSE AUTOMATIQUE À CHARGEMENT FRONTAL
W11156983C
W11156984B – SP
Designed to use only HE
High Efficiency detergents.
Conçue uniquement pour
une utilisation avec des
détergents HE Haute
efficacité.
Protocole NSF P351
Performance de réduction des allergènes pour les laveuses
de format familial à usage résidentiel ou commercial
Seuls les modèles comportant le programme de lavage
anti-allergie répondent aux critères de la certication NSF.
2
TABLE OF CONTENTS / TABLE DES MATIÈRES
WASHER SAFETY ...................................................................................................... 3
ACCESSORIES ...........................................................................................................4
CONTROL PANEL AND FEATURES .......................................................................5
CYCLE GUIDE .............................................................................................................. 8
CHOOSING THE RIGHT DETERGENT .................................................................10
USING THE OPTIMAL DISPENSE DRAWER (on some models) .................10
USING YOUR WASHER ..........................................................................................11
WASHER MAINTENANCE ......................................................................................16
TROUBLESHOOTING ..............................................................................................20
WARRANTY ...............................................................................................................29
ASSISTANCE OR SERVICE ............................................................ BACK COVER
SÉCURITÉ DE LA LAVEUSE ..................................................................................30
ACCESSOIRES .........................................................................................................31
TABLEAU DE COMMANDE ET CARACTÉRISTIQUES ....................................32
GUIDE DE PROGRAMMES ....................................................................................36
CHOIX DU DÉTERGENT APPROPRIÉ ................................................................40
UTILISATION DU TIROIR DISTRIBUTEUR DE DOSAGE OPTIMAL
(sur certains modèles) ............................................................................................40
UTILISATION DE LA LAVEUSE .............................................................................41
ENTRETIEN DE LA LAVEUSE ................................................................................46
DÉPANNAGE .............................................................................................................51
GARANTIE ..................................................................................................................63
ASSISTANCE OU DÉPANNAGE .................................COUVERTURE ARRIÈRE
3
WASHER SAFETY
4
Customize your new washer and dryer with the following
genuine Whirlpool accessories. For more information on
options and ordering, call 1-800-344-1274 or visit us at:
www.maytag.com/accessories. In Canada, call
1-800-688-2002 or visit us at www.maytag.ca.
INSTALLATION & MAINTENANCE
ACCESSORIES
FACTORY CERTIFIED PARTS – these three
words represent quality parts and accessories
designed specically for your appliance.
Time tested engineering that meets
our strict quality specications.
FACTORY CERTIFIED PARTS
Accessories designed for your appliance:
ACCESSORIES
15" Pedestal
Color-matched pedestals raise
the washer and dryer to a more
comfortable working height.
The large drawer provides
convenient storage.
Stack Kit
If space is at a premium,
the stack kit allows the dryer
to be installed on top of the
washer.
5
CONTROL PANEL AND FEATURES
Not all features and cycles are available on all models.
NOTES:
The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are registered,
touch the control panel with your ngertip, not your ngernail. When selecting a setting or option, simply touch its name.
At cycle completion, your setting and option choices will be remembered for your next use of that cycle. However, if power is lost
to the washer, the settings and options will go back to the factory defaults.
3
6
6
A
B
I
D
F
E
2
1
5
4
A
C
B
D
F
E
A
C
D
H
G
B
3
6
2
1
5
4
6
3
6
2 1
5
4
6
I
I
6
POWER
Touch to turn the washer on and off. Touch to stop/cancel
a cycle at any time.
NOTE: Turning the Wash Cycle knob will also turn the
washer on.
WASH CYCLE KNOB
Turn the knob to select a cycle for your laundry load. Press
the Wash Cycle knob to enable the Extra Power option.
NOTE: The Clean Washer with affresh
®
LED will ash when
the washer has run 30 wash cycles as a reminder to run the
Clean Washer with affresh
®
cycle.
See “Cycle Guide” for detailed descriptions of cycles.
NOTE: For best results when using the Overnight Wash &
Dry cycle, use for loads weighing 2 lbs or less, such as a
soccer uniform or a running tank and shorts. Allow the cycle
to run the full duration of 12 hours.
EXTRA POWER
Extra Power option can be used for increased cleaning
power. Press the Wash Cycle Knob to activate the Extra
Power option, which runs a cold pre-wash cycle before
the main cycle. When Extra Power is activated, the Cycle
Control Knob will illuminate and the estimated time
remaining on the display will increase. On single load
dispenser models, add an extra dose of detergent to the
Bleach/Detergent for Extra Power compartment when using
Extra Power, for best results.
START
Touch and hold for 3 seconds until the light above START
comes on to start a cycle or touch once while a cycle is in
process to pause it. If you want to add a garment, you can
touch START when the “Add Garment” LED is on.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display. Tightly packing,
unbalanced loads, or excessive suds may cause the washer
to lengthen the cycle time as well.
Touch the desired setting on the display to adjust. See
“Cycle Guide” for available settings on each cycle. Not all
settings are available with all cycles.
Temp
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, use the warmest wash water safe for your
fabric, following the garment label instructions. All wash
temperatures feature a cold rinse.
Spin
This washer automatically selects the spin speed
based on the cycle selected. Some preset speeds
can be changed.
Faster spin speeds mean shorter dry times but may
increase wrinkling in your load.
Slower spin speeds reduce wrinkling but will leave
your load more damp.
Soil
Soil Level (wash time) is preset for each wash cycle.
When you change the soil setting, the cycle time will
increase or decrease in the Estimated Cycle Time
display.
1
2
3
4
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, use the Soil Level setting to select a higher soil
level. For lightly soiled and delicate fabrics, use the Soil
Level setting to select a lower soil level. Lower soil level
settings will help reduce tangling and wrinkling.
CYCLE STATUS LIGHTS
NOTE: Not all Cycle Status Lights are available on all
models.
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds
or pauses that are different from traditional washers.
Sensing
When START is touched and held, the washer will rst
perform a self-test on the door lock mechanism and the
sensing light will come on. You will hear a click, the drum will
make a partial turn, and the door will click again as it unlocks
briey. The door will click one more time when it locks again.
Once the door has locked the second time, the washer will
begin spinning to sense the load size. This sensing process
will continue throughout the cycle. You may also hear water
owing through the dispenser, adding detergent to the load.
After the load size is sensed, the estimated time based on
load size will be displayed. The actual cycle time may be
lengthened; however, the display will continue to show the
estimated time.
The sensing light will blink once a second at various times
during the cycle, such as when the washer is reducing
extra suds.
Washing
During the wash cycle, this will display to let you know the
cycle is in progress.
Add Garment
When “Add Garment” is lit, you may pause the washer, open
the door, and add items. Touch and hold START to start the
washer again.
Detergent Low
When detergent in the dispenser is running low, the display
will show the detergent level (Low).
OPTIONS
Touch to activate additional wash options or additional
features on the washer. Not all options are available on
all models.
Delay Start
Touch this option to delay the start of the wash cycle
by up to 12 hours.
6
A
5
7
Fresh Hold
®
/Fresh Spin
Cycles
The Fresh Hold
®
/Fresh Spin
option will periodically
tumble the load after the end of the cycle for up to 24
hours while the integrated fan circulates air through the
washer to reduce humidity. Fresh Spin
also periodically
tumbles the load after the end of the cycle but does
not use an integrated fan. To turn on the Fresh Hold
®
/
Fresh Spin
option, touch FRESH HOLD. If, however, the
Fresh Hold
®
/Fresh Spin
option is turned on, it will stay
on for all future cycles until turned back off – the washer
remembers the last on/off status set. To turn off the Fresh
Hold
®
/Fresh Spin
option, touch FRESH HOLD.
To turn off the Fresh Hold
®
/Fresh Spin
option when it is
running, touch POWER.
NOTE: The door will lock while the Fresh Hold
®
/Fresh
Spin
option is active. To cancel the option and unlock
the door, touch POWER.
Steam
The Steam option adds additional soak and wash time
to many cycles to help remove tough stains as well as
a steam boost for added cleaning power. An integrated
heater helps to maintain optimal wash temperatures.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
Cycle Signal
Touch and hold CYCLE SIGNAL for about 3 seconds the
display will count down you will see “3,” then “2,” then
“1.” The display will start displaying the sound levels you
will see “1,” then “2,” then “3,” then “OFF.” When the
CYCLE SIGNAL is released the last value shown will be
the current selection.
B
C
D
E
G
H
I
Control Lock
Touch and hold for 3 seconds to lock the controls to avoid
unwanted changes or operation. Touch and hold 3 seconds
again to unlock. For each second CONTROL LOCK is held
down, the display will count down 1 second; you will see
“3,” then “2,” then “1.” You may still touch START to pause
the cycle or touch POWER to turn off the washer.
WiFi Connect
Download the Maytag
app and follow the instructions to
connect your washer/dryer to your home Wi-Fi network. You
may also visit www.maytag.com/connect. In Canada, visit
www.maytag.ca.
Remote Enable
Touch this button to be able to use the Maytag
app to
control the washer. Press this button each time after Power
On and when the door is opened and closed.
Extra Power
The Extra Power option boosts stain ghting performance
on any wash cycle with a dual temperature wash, combining
cold and hot temperature during different phases of the
wash time. To use this function press the knob to activate
the Extra Power option. For single dose dispensers and an
additional 1/2 the manufacturer’s recommended amount
into the dispenser marked for Extra Power. For the Optimal
Dispenser it will automatically dispense the detergent at the
optimal time.
F
Automatically dilutes and dispenses liquid chlorine
bleach at the optimum time during the rst rinse after
the wash cycle. This compartment cannot dilute
powdered bleach. On single load dispenser models,
use this compartment to add an extra dose of detergent
when using the Extra Power option.
Liquid High Efficiency “HE” detergent compartment
This compartment holds liquid or powdered HE
detergent for your main wash cycle.
Optimal Dispense Liquid High Efficiency “HE”
detergent compartment
This compartment holds up to 14.3 oz (424 ml) of liquid
HE detergent allowing you to avoid having to rell
detergent for each load. Also, this will use just the right
amount of detergent required for a particular load/cycle.
Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric
softener at the optimum time in the cycle.
Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
D
B
C
A
7
DISPENSERS
C
B
A
C
B
Optimal Dispense Drawer (on some models)
The Optimal Dispense drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach, and
liquid fabric softener to the wash load at the proper time. See
“Using the Optimal Dispense Drawer” for information on using
the dispenser drawer.
Single Load Dispenser Drawer (on some
models)
The dispenser drawer gives you the convenience
of adding HE detergent, liquid chlorine bleach,
and liquid fabric softener to the wash load at the
proper time. See “Using the Dispenser Drawer”
for information on using the dispenser drawer.
D
8
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings
that best t the load being washed. Not all settings are available with each cycle and some options cannot be used together.
Not all cycles and options are available on all models.
*All temperature selections feature a Cold rinse.
**The Steam option is only available when a Warm, Very Warm, or Hot water temperature is selected.
***Spin speed varies by model.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3–4 items, not more
than ¼ full.
Medium load: Fill the washer drum up to about ½ full.
Large load: Fill the washer drum up to about ¾ full.
Continued on next page
Items to wash
using default
cycle settings:
Cycle:
Wash
Temperature
*
Spin
Speed***
Soil
Level:
Options/
Modifiers:
Cycle Details:
Normally soiled
cottons, linens,
sheets, and
mixed garment
loads
Normal Cold
Cool
Warm
Very Warm
Hot
Off
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
This cycle combines
medium-speed tumbling
and an extra-high-
speed spin. This cycle is
designed to provide the
most energy efficiency.
Sturdy colorfast
fabrics and
heavily soiled
garments
Heavy
Duty
Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
Fast-speed tumbling and
an extra-fast-speed final
spin help provide optimal
cleaning and reduce
drying times.
Heavily soiled
white fabrics
and garments
Whites Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
Uses a longer wash
time with fast-speed
tumbling, extra rinsing,
and an extra-fast-speed
spin to provide optimal
cleaning and rinsing
when bleach is used.
Sturdy towels
and wash cloths
Towels Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
Provides fast-speed
tumbling, longer wash
time, normal rinsing,
and an xtrafast- speed
spin to shorten drying
time.
Large items
such as sleeping
bags, small
comforters,
jackets
Bulky
Items
Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
Use this cycle to wash
large items such as
jackets and small
comforters. The washer
will ll with enough
water to wet down the
load before the wash
portion of the cycle
begins.
Do not tightly pack
basket.
Small loads of
2–4 lightly soiled
garments
Quick
Wash
Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
For small loads (2–4
items) needed quickly.
This cycle combines
fast-speed tumbling, a
shortened wash time,
and an extra-fast-
speed spin for reduced
drying times.
Extra-large load: Fill the washer drum, but make
sure clothes can tumble freely. For best results, avoid
packing tightly.
9
Items to wash
using default
cycle settings:
Cycle:
Wash
Temperature
*
Spin
Speed***
Soil
Level:
Options/
Modifiers:
Cycle Details:
Sheer fabrics,
lingerie,
sweaters, and
lightly soiled
shirts, blouses,
trousers, pants,
and skirts
Delicates Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
This cycle combines
slow-speed tumbling
and slow-speed spin
for gentle fabric care
and reduced wrinkling.
Lightly soiled
shirts, blouses,
trousers, pants,
and dresses
Wrinkle
Control
Cold
Cool
Warm
Very Warm
Hot
Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
This cycle combines
low-speed tumbling and
medium-speed spin for
gentle fabric care and
reduced wrinkling.
Clothing,
bedding and
towels requiring
sanitization
Sanitize Hot Off
Slow
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
This cycle eliminates
99.99% of the most
common bacteria
found in clothes,
sheets, and towels.
The extra hot wash
temperature ensures
sanitization. Check
recommended wash
temperature of your
items. Bacteria tested
were K. pneumonia,
P. aureginosa, and S.
aureus.
Bright or darkly
colored cottons,
linens, casual
and mixed loads
Colors Cold Off
Medium
Med Fast
Fast
Light
Medium
Med Heavy
Heavy
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
Cold water with an
additional wash action
gently lifts stains while
caring for fabrics.
Settings may be
adjusted as desired,
but must use only cold
water settings.
2–4 lightly
soiled synthetic
garments,
athletic
uniforms, or
workout wear
Overnight
Wash &
Dry
Cold
Cool
Warm
Very Warm
Hot
Fast Light
Medium
Med Heavy
Heavy
Steam**
Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Extra power
This short wash cycle
has an extra-high-
speed spin followed by
intermittent tumbling
and fan activation to
circulate air through the
clothes.
Wet load of
clothes
Drain
& Spin
N/A Off
Slow
Medium
Med Fast
Fast
N/A Extra Rinse
Fresh Hold
®
/Fresh
Spin™
Use Drain & Spin to
remove excess water
from the load. Spin
speed can be set to a
lower setting.
*All temperature selections feature a Cold rinse.
**The Steam option is only available when a Warm, Very Warm, or Hot water temperature is selected.
***Spin speed varies by model.
Continued on next page
10
*All temperature selections feature a Cold rinse.
**The Steam option is only available when a Warm, Very Warm, or Hot water temperature is selected.
***Spin speed varies by model.
No clothes in
washer
Clean
Washer
with
affresh
®
N/A N/A N/A N/A Use this cycle every
30 washes to keep the
inside of your washer fresh
and clean. This cycle uses
a higher water level. Use
with affresh
®
washer cleaner
tablet or liquid chlorine
bleach to thoroughly clean
the inside of your washer.
This cycle should not be
interrupted. See “Washer
Care.”
IMPORTANT: Do not place
garments or other items
in the washer during the
Clean Washer with affresh
®
cycle. Use this cycle with
an empty wash tub. See
“Washer Care” in “Washer
Maintenance.”
Items to wash
using default
cycle settings:
Cycle:
Wash
Temperature
*
Spin
Speed***
Soil
Level:
Options/
Modifiers:
Cycle Details:
CHOOSING THE RIGHT DETERGENT
Use only High Efciency detergents. The package will be
marked “HE” or “High Efciency.” Low-water washing creates
excessive sudsing with a non-HE detergent. Using non-HE
detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component failure and,
over time, buildup of mold or mildew. HE detergents should be
low-sudsing and quick-dispersing to produce the right amount
of suds for the best performance. They should hold soil in
suspension so it is not redeposited onto clean clothes. Not all
detergents labeled as High Efciency are identical in formulation
and their ability to reduce suds. For example, natural, organic,
or homemade HE detergents may generate a high level of suds.
If you use one of these and see an “Sd” or “Sud” error code
appear in the display, consider using a different HE detergent.
Always follow the detergent manufacturer’s instructions to
determine the amount of detergent to use. Do not go over the
Max line on the dispenser. See “Using the Dispenser Drawer”
or “Using the Optimal Dispense Drawer” for more information.
Use only High Efficiency
(HE) detergent.
About Detergent Concentration
Today’s liquid HE detergents are concentrated. Most brands of
concentrated HE detergent will show the level of concentration
on the bottle. If so, simply set the concentration level in the
Optimal Dispense menu to match the level shown on the bottle.
However, if the detergent bottle does not give the concentration,
it can be easily calculated. Just divide the package size in uid
ounces by the number of loads. Then refer to the chart below
to nd the concentration.
If you do not get your desired cleaning results, try using a lower
concentration number. If you have excess suds, try using a
higher concentration number.
Concentration Number of ounces ÷ number of loads
2X 1.5–2.49
3X 0.9–1.49
4X 0.7–0.89
5X 0.5–0.69
6X 0.3–0.49
8X < 0.29
NOTES:
A small amount of water may remain in the dispensers from
the previous wash cycle. This is normal.
See “About Detergent Concentration” for information on
detergent concentration.
To ensure you have enough detergent in the dispenser,
the display will show the detergent level (Low and open lid).
To add single-dose and Oxi-type boosters, see the “Using
Your Washer” section.
1. Open the dispenser drawer.
2. Add laundry products as described in steps 4–6 in the
“Using Your Washer” section.
3. Slowly close the dispenser drawer. Make sure it is
completely closed.
USING THE OPTIMAL DISPENSE DRAWER (on some models)
11
Single-dose laundry packets, Oxi-type boosters, color-safe
bleach, or fabric softener crystals can be added to the drum
prior to adding laundry.
NOTE: Always follow manufacturer’s instructions.
USING YOUR WASHER
Sort items by recommended cycle, water temperature,
and colorfastness. Separate heavily soiled items from lightly
soiled. Separate delicate items from sturdy fabrics. Treat
stains promptly and check for colorfastness by testing stain
remover products on an inside seam.
IMPORTANT:
Empty pockets. Loose change, buttons, or any small
object can plug pumps and may require a service call.
Close zippers, fasten hooks, tie strings and sashes,
and remove non-washable trim and ornaments.
Mend rips and tears to avoid further damage to items
during washing.
1. Sort and prepare your laundry
First wash cycle without laundry
Before washing clothes for the rst time, add liquid or powdered
HE detergent to the detergent dispenser. Choose the Quick
Wash cycle and run it without clothes. Use only HE detergent.
This initial cycle serves to ensure the interior is clean and the
dispenser drawer is ready for use before washing clothes.
Turn knits inside out to prevent pilling. Separate lint-takers from
lint-givers. Synthetics, knits, and corduroy fabrics will pick up
lint from towels, rugs, and chenille fabrics.
Do not dry garments if stains remain after washing because
heat can set stains into fabric.
Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
2. Add laundry products (if desired)
12
If using the optimal dose dispenser, do not need to
add detergent for every load, the dispenser will take
automatically.
4. Add HE detergent
NOTE: Do not add single-dose laundry packets, Oxi-type
boosters, color-safe bleach, or fabric softener crystals to
dispensers. They will not dispense correctly.
Adjust the selector, based on type of HE detergent used
(either liquid or powdered). See “Using the Dispenser
Drawer” section on how to use the dispenser.
Powdered
HE detergent
Liquid
HE detergent
Optimal Dispense Drawer
Single Load Dispenser Drawer
Place a load of sorted items loosely in the washer. Items need
to move freely for best cleaning and to reduce wrinkling and
tangling. Close the washer door by pushing it rmly until the
latch clicks.
Depending on load type and cycle, the washer can be fully
loaded but not tightly packed. Washer door should close
easily. See “Cycle Guide” for loading suggestions.
Mix large and small items and avoid washing single items.
Load evenly.
Wash small items in mesh garment bags. For multiple items,
use more than one bag and ll bags equally.
3. Load laundry into washer
Push load fully into washer. Make sure no items are resting on
the rubber seal to avoid trapping them between the seal and
the door glass.
13
Add liquid chlorine bleach to the bleach compartment.
Do not overll, dilute, or use more than manufacturer's
recommendation for dosing. Do not use color-safe bleach
or Oxi in the same cycle with liquid chlorine bleach.
IMPORTANT:
Always measure liquid chlorine bleach. Use a measuring
cup with a pour spout; do not guess.
Do not ll beyond the Max level. Overlling could cause
garment damage.
Do not use thickened, easy-pour, or no-splash bleach
when running the Clean Washer with affresh
®
cycle as
excess suds may occur.
6. Add liquid chlorine bleach
to dispenser (if desired)
Pour a measured amount of liquid fabric softener into
liquid fabric softener compartment. Always follow
manufacturer’s directions for correct amount of fabric
softener based on your load size.
Fabric softener is always dispensed in the last rinse,
even if Extra Rinse is selected.
IMPORTANT: Do not overll, dilute, or use more than
manufacturer's recommendation for dosing of fabric
softener. Do not ll past the Max line. Overlling dispenser
will cause fabric softener to immediately dispense into
washer.
Do not spill or drip any fabric softener onto the clothes.
Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
5. Add liquid fabric softener to dispenser
(if desired)
Single Load Dispenser Drawer
Optimal Dispense Drawer
Single Load Dispenser Drawer
Optimal Dispense Drawer
14
7. Touch POWER to turn on washer
Slowly close the Dispense drawer. Make sure the drawer is
closed completely, then touch POWER to turn on the washer
or go to Step 8.
8. Select CYCLE*
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features. Press the knob for enabling the
Extra Power option.
The Extra Power option boosts stain ghting performance on
any wash cycle with a dual temperature wash, combining cold
and hot temperature during different phases of the wash time.
Press the knob to select this option.
The display will show the default settings for the selected cycle.
To adjust a setting, touch its name – Temp, Spin or Soil.
Adjusting settings will change the Estimated Cycle Time. Tightly
packing the load, unbalanced loads, or excessive
suds may also cause the washer to increase the cycle time.
9. Adjust settings, if desired*
10. Select any additional options*
To add an option to the cycle, touch its name – Fresh Hold,
Steam, Extra Rinse, Cycle Signal, or Control Lock.
To remove an option from the selected cycle, touch the
option again.
* Not all options and settings are available with all cycles.
See “Cycle Guide” for available options and settings.
11. Set detergent concentration
(On Optimal Dispense Model only)
You can adjust the detergent concentration setting if needed.
Default settings are 2x detergent concentration. If the detergent
concentration is not listed on the package, see “About
Detergent Concentration” to calculate the concentration.
To Adjust Dispenser Settings:
Press and hold the Temp & Soil until the display shows the
desired concentration level.
The washer will remember this level until it is changed.
15
12. Set a delayed wash
If you do not want to begin a cycle immediately, you may
choose the Delay Hrs. option. This will delay the start of
the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch SELECT Delay Start to set the desired delay time.
2. Touch and hold START to start the delay countdown.
The countdown stops blinking.
13. Touch and hold START to begin
wash cycle
Touch and hold START to start the wash cycle. To pause
a cycle in progress, touch START once, then touch and
hold again to continue the cycle. To cancel a cycle, touch
POWER.
Once you touch and hold START, you will hear the door lock,
unlock, and lock again. The washer door will remain locked
during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2
missed garments, you may do so while the
“Add Garment” light is lit. The time allowed
to add a garment will vary based on cycle
selection and load size.
Touch START once; the door will unlock once
the washer movement has stopped. This may
take several minutes. Then close the door and
touch and hold START again to restart the cycle.
Adding items after Add Garment light
is off:
Cancel current cycle. Water will drain and you will need to
reselect cycle and restart.
For wash performance and optimal energy savings, add
garments only when the “Add Garment” light is on.
14. Remove garments promptly
after cycle is finished
Promptly remove garments after cycle
has completed to avoid odor and rusting of
metal objects on garments. When unloading
garments, pull back the door seal and check
for small items between the tub and the
washer drum.
If you will be unable to remove the load
promptly, use the Fresh Hold
®
/Fresh
Spin™ option. If the Fresh Hold
®
/Fresh
Spin™ option is selected, the washer will
automatically activate the fan and tumble
the load periodically for up to 24 hours. To turn off the Fresh
Hold
®
/Fresh Spin™ option, touch POWER. To set the washer so
that the Fresh Hold
®
/Fresh Spin™ option does not come on for
future cycles, touch FRESH HOLD.
NOTES:
The door will remain locked while the Fresh Hold
®
/Fresh
Spin™ option is active. To cancel the option and unlock the
door, touch POWER.
A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
16
WASHER MAINTENANCE
WASHER CARE
Recommendations to Help Keep Your Washer Clean
and Performing at Its Best
1. Always use High Efciency (HE) detergents and follow
the HE detergent manufacturer’s instructions regarding
the amount of HE detergent to use. Never use more than
the recommended amount because that may increase the
rate at which detergent and soil residue accumulate inside
your washer which, in turn, may result in undesirable odor.
2. Use warm or hot water washes sometimes (not exclusively
cold water washes) because they do a better job of
controlling the rate at which soils and detergent accumulate.
3. Always leave the washer door slightly ajar between
uses to help dry out the washer and avoid the buildup
of odor-causing residue.
4. Periodically clean residue from all interior surfaces
of the glass window. For better care, wipe the entire
inside of the glass door with a damp cloth.
Cleaning Your Front-Loading Washer
Read these instructions completely before beginning
the routine cleaning processes recommended below.
This Washer Maintenance Procedure should be performed,
at a minimum, once per month or every 30 wash cycles,
whichever occurs sooner, to control the rate at which soils
and detergent may otherwise accumulate in your washer.
Cleaning the Door Seal
1. Open the washer door and remove any clothing or items
from the washer.
2. Inspect the gray-colored seal between the door opening
and the drum for stained areas or soil buildup. Pull back
the seal to inspect all areas under the seal and to check
for foreign objects.
WASHER CARE (cont.)
3. If stained areas or soil buildup is found, wipe down
these areas of the seal using either of the following two
procedures:
a. affresh
®
Machine Cleaning Wipes Procedure:
i. When the cycle is complete, gently pull back the
rubber door seal and clean the entire surface with
the textured side of an affresh
®
Machine Cleaning
Wipe.
b. Dilute Liquid Chlorine Bleach Procedure:
i. Mix a dilute bleach solution, using ¾ cup (177 mL)
of liquid chlorine bleach and 1 gallon (3.8 L) of
warm tap water.
ii. Wipe the seal area with the dilute solution, using
a damp cloth.
iii. Let stand 5 minutes.
iv. Wipe down area thoroughly with a dry cloth and let
washer interior air dry with door open.
IMPORTANT:
Wear rubber gloves when cleaning with bleach.
Refer to the bleach manufacturer’s instructions
for proper use.
Cleaning the Inside of the Washer
This washer has a special cycle that uses higher water
volumes in combination with affresh
®
Washer Cleaner or
regular liquid chlorine bleach to thoroughly clean the inside
of the washer. Steam washer models also utilize steam to
enhance cleaning in this special cycle.
IMPORTANT: Do not use thickened, easy-pour, or no-splash
bleach when running the Clean Washer with affresh
®
cycle as
excess suds may occur.
NOTE: Read these instructions completely before beginning
the cleaning process.
Begin Procedure
1. Clean Washer with affresh
®
Cycle Procedure
(Recommended for Best Performance):
a. Open the washer door and remove any clothing
or items.
b. Use an affresh
®
Machine Cleaning Wipe or a soft, damp
cloth or sponge to clean the inside door glass.
c. Add an affresh
®
Washer Cleaner tablet to the
washer drum.
d. Do not add the affresh
®
Washer Cleaner tablet
to the dispenser drawer.
e. Do not add any detergent or other chemical to the
washer when following this procedure.
f. Close the washer door.
g. Select the Clean Washer with affresh
®
cycle.
h. On some models: Select the Fresh Hold
®
/Fresh Spin™
option to help dry the washer interior after the cycle is
complete.
NOTE: The washer remembers your last option
selection and will use it for future wash cycles until
you deselect that option. While the fan is ON, the
washer door will lock. To unlock the door, touch
POWER.
i. Touch and hold START to begin the cycle. The
Clean Washer with affresh
®
Cycle Operation is
described below.
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses:
Mark the date of replacement on the label with a permanent
marker.
Check that the old washers are not stuck on the washer
inlet valves.
Use new washers in the new inlet hoses to ensure
a proper seal.
WATER INLET HOSES
17
WASHER CARE (cont.)
2. Chlorine Bleach Procedure:
a. Open the washer door and remove any clothing
or items.
b. Open the dispenser drawer and add regular liquid
chlorine bleach to the MAX level in both the bleach
compartment and the fabric softener compartment.
Either traditional or HE chlorine bleach can be used.
IMPORTANT: Do not use thickened, easy-pour,
or no-splash bleach as excess suds may occur.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time.
c. Close the washer door and the dispenser drawer.
d. Do not add any detergent or other chemicals to the
washer when following this procedure.
e. Close the washer door.
f. Select the Clean Washer with affresh
®
cycle.
g. On some models: Select the Fresh Hold
®
/Fresh Spin™
option to help dry the washer interior after the cycle is
complete.
NOTE: The washer remembers your last option
selection and will use it for future wash cycles until
you deselect that option. While the fan is ON, the
washer door will lock. To unlock the door, touch
POWER.
h. Touch and hold START to begin the cycle. The
Clean Washer with affresh
®
Cycle Operation is
described below.
NOTE: For best results, do not interrupt cycle.
Description of Clean Washer with affresh
®
Cycle
Operation:
1. The Clean Washer with affresh
®
cycle will determine
whether clothing or other items are in the washer.
2. If no items are detected in the washer, it will proceed
with the cycle.
a. If any items are detected in the washer, “rL”
(remove load) will be displayed. The door will unlock.
Open washer and remove any garments from the
washer drum.
b. Touch POWER to clear the “rL” code.
c. Touch and hold START to restart the cycle.
3. Steam models only: During the rst 20 minutes of the
cycle, it will activate the steamer but the drum will not spin
or ll with water. You may see condensation on the door
glass during this initial phase. If you are using an affresh
®
Washer Cleaner tablet, it will not dissolve completely
during the steam phase. This is normal.
After the cycle is complete, leave the door open slightly to
allow for better ventilation and drying of the washer interior.
Cleaning the Dispensers
After a period of using your washer, you may nd some
residue buildup in the washer’s dispensers. To remove
residue from the dispensers, remove the drawer and wipe
the surfaces with an affresh
®
Machine Cleaning Wipe or a
damp cloth and towel dry either before or after you run the
Clean Washer with affresh
®
cycle. Use an all-purpose surface
cleaner, if needed.
IMPORTANT: Dispenser is not dishwasher safe.
Cleaning the Outside of the Washer
Use an affresh
®
Machine Cleaning Wipe or a soft, damp
cloth or sponge to wipe up any spills. Occasionally wipe the
outside of your washer to help keep it looking new. Use an
affresh
®
Machine Cleaning Wipe or mild soap and water.
IMPORTANT: To avoid damaging the washer’s nish,
do not use abrasive products.
3. Lift off cover panel by
pulling straight up.
To replace:
1. Slide cover panel back
onto posts on dispenser.
2. Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
REMOVING THE DISPENSER
To remove:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out
to remove the dispenser.
CLEAN WASHER CYCLE REMINDER
NOTE: Not all models have the Clean Washer with affresh
®
cycle reminder light.
The Clean Washer with affresh
®
LED
will ash at the end of a wash cycle
when the washer has run 30 wash
cycles. This is a reminder to run the
Clean Washer with affresh
®
cycle.
If the Clean Washer with affresh
®
cycle is not turned on, the
LED will stop ashing at the end of a wash cycle after running
3 more regular wash cycles. After 30 more wash cycles are
completed, the Clean Washer with affresh
®
LED will again
ash at the end of a wash cycle as a reminder.
Optimal Dispense Drawer
18
Operate your washer only when you are home. If moving,
or not using your washer for a period of time, follow these
steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer to avoid ooding due
to water pressure surges.
HELPFUL TIP: Attach a reminder note to the washer
to turn the water back on before washer’s next use.
3. Clean the dispensers. See “Cleaning the Dispensers.”
NON-USE AND VACATION CARE
REMOVING THE DISPENSER (cont.)
Removing the Dispenser
To remove:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out
to remove the dispenser.
3. Lift off cover panel by
pulling straight up.
To replace:
1. Slide cover panel back
onto posts on dispenser.
2. Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
Single Load Dispenser Drawer
19
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, then disconnect and drain
water inlet hoses.
HELPFUL TIP: Attach a reminder note to the washer
to turn the water back on before washer’s next use.
2. Put 1 qt (1 L) of R.V.-type antifreeze in washer drum
and run washer on Normal cycle for about 2 minutes to
mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
“Winter Storage Care” directions before moving.
3. Disconnect drain hose from drain system and from back
of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer drum.
6. Bundle power cord with a rubber band or cable tie to
keep it from hanging onto the ground.
IMPORTANT: Call for service to install new transport bolts.
Do not reuse transport bolts. Washer must be transported
in the upright position. To avoid structural damage to
your washer, it must be properly set up for relocation
by a certied technician.
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage,
or moving:
1.
Refer to Installation Instructions to locate, level, and
connect washer.
2.
Before using again, run washer through the following
recommended procedure:
To use washer again:
1.
Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2.
Plug in washer or reconnect power.
3.
Run washer through Power Wash cycle to clean washer
and remove antifreeze, if used. Use only HE detergent.
Use half the manufacturer’s recommended amount for
a medium-size load.
20
If you experience Possible Causes Solution
Error Code Appears in Display (for 2- and 3-digit displays)
Once any possible issues are corrected, touch POWER once to clear the code. Reselect and restart the cycle.
“Sd” or “Sud”
(excess suds) appears
in display
Excessive suds in washer. Washer is
running a suds-reduction routine.
Allow the washer to continue. Use only HE detergent. Always
follow the detergent manufacturer’s instructions to determine
the amount of detergent to use and base detergent quantity
on load size. Not all detergents labeled as High Efciency are
identical in formulation and their ability to reduce suds. For
example, natural, organic, or homemade HE detergents may
generate a high level of suds. If you use one of these and see
an “Sd” or “Sud” error code appear in the display, consider
using a different HE detergent.
“Lo” “FL” appears on
display, or F8 E1
or
“Lo” “FL” appears on
display, or F08 E01
(water supply error)
appears in display
Check for proper water supply. Unit will drain for 8 minutes while door remains locked. The
drain cycle must be allowed to complete or the error code
cannot reset. When complete, touch POWER once to clear the
code. Then touch POWER again and restart the washer.
If code appears again, call for service.
Both hoses must be attached and have water owing to the
inlet valve.
Both hot and cold water faucets must be ON.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
If used, auto shut-off connectors and hoses must be properly
installed and in working order.
Check for proper inlet hoses. Use only manufacturer's recommended inlet hoses.
F9 followed by E1
or
F09 followed by E01
(drain pump system
error) appears in display
Check for proper drain hose
installation.
Ensure top of drain pipe is installed at least 39" above the oor.
Ensure drain hose extends no farther than 4
1
2" into standpipe.
Check plumbing for correct drain
hose installation. Drain hose extends
into standpipe farther than 4
1
2"
(114 mm).
Check drain hose for proper installation.
Make sure the drain hose is not kinked, pinched, or blocked.
Remove any clogs from drain hose.
Use drain hose form and securely attach to drainpipe or tub.
Lower drain hose if the end is higher than 96" (2.4 m) above
the oor.
Ensure drain hose extends no farther than 4
1
2"into standpipe.
Not using HE detergent or using too
much HE detergent.
Use only HE detergent. Always measure detergent and follow
manufacturer’s directions based on load size and soil level.
F5 followed by E2
or
F05 followed by E02
(door will not lock)
appears in display
Washer door not locking. Touch POWER to cancel the cycle. Check that the door is
closed completely and latching. Check for items in the washer
drum that may be keeping the door from closing completely.
Err Invalid action performed. This error code will be shown in the following conditions:
1. Trying to start a cycle with the door open.
2. Trying to select a different cycle while you’re already
running one.
No further action is needed to correct this.
TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.maytag.com/product_help
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

Amana MHW5630HW Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues