Amana UPRIGHT FREEZER User Instructions

Marque: Amana

Modèle: UPRIGHT FREEZER

Catégorie: Cuisinières

Taper: User Instructions

THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,

please visit our website at www.amanacanada.ca for additional information. If you still need assistance, call us at 1-800-807-6777.

You will need your model and serial number located on the oven frame behind the storage drawer panel.

TableofContents

RANGE SAtiETY ....................................................................................... 2

The Anti-Tip Bracket ............................................................................. 2

FEATURE GUIDE ..................................................................................... 4

COOKTOP USE ........................................................................................ 5

OVEN USE ................................................................................................ 6

Electronic Oven Controls ...................................................................... 6

Sabbath Mode (on some models) ........................................................ 6

Aluminum Foil........................................................................................ 7

Positioning Racks and Bakeware ......................................................... 7

Oven Vent.............................................................................................. 8

Baking and Roasting ............................................................................. 8

Broiling .................................................................................................. 8

Timed Cooking (on some models) ........................................................ 8

RANGE CARE ........................................................................................... 9

Self-Cleaning Cycle (on some models) ................................................ 9

General Cleaning ................................................................................. 10

Oven Light ........................................................................................... 11

TROUBLESHOOTING ............................................................................ 11

ACCESSORIES ...................................................................................... 12

WAR RANTY ............................................................................................ 13

W10321001A

RANGESAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having

the anti-tip bracket fastened down properly.

Tip Over Hazard

A child or adult can tip the range and be killed.

Connect anti-tip bracket to rear range foot.

Reconnect the anti-tip bracket, if the range is moved.

See the installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children and adults.

Anti-Tip Bracket

Range Foot

Making sure the anti-tip bracket is installed:

• Slide range forward.

• Look for the anti-tip bracket securely attached to floor.

• Slide range back so rear range foot is under anti-tip bracket.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the range, follow

basic precautions, including the following:

[] WARNING: TO REDUCE THE RISK OF TIPPING OF

THE RANGE, THE RANGE MUST BE SECURED BY

PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK

IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE

RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET

SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE

BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP

BRACKET.

[] CAUTION: Do not store items of interest to children in

cabinets above a range or on the backguard of a range -

children climbing on the range to reach items could be

seriously injured.

[] Proper Installation - Be sure the range is properly installed

and grounded by a qualified technician.

[] Never Use the Range for Warming or Heating the Room.

[] Do Not Leave Children Alone - Children should not be left

alone or unattended in area where the range is in use.

They should never be allowed to sit or stand on any part of

the range.

[] Wear Proper Apparel - Loose-fitting or hanging garments

should never be worn while using the range.

[] User Servicing - Do not repair or replace any part of the

range unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

[] Storage in or on the Range - Flammable materials should

not be stored in an oven or near surface units.

[] Do Not Use Water on Grease Fires - Smother fire or flame

or use dry chemical or foam-type extinguisher.

[] Use Only Dry Potholders - Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR

UNITS - Surface units may be hot even though they are

dark in color. Areas near surface units may become hot

enough to cause burns. During and after use, do not touch,

or let clothing or other flammable materials contact surface

units or areas near units until they have had sufficient time

to cool. Among those areas are the cooktop and surfaces

facing the cooktop.

[] Use Proper Pan Size - The range is equipped with one or

more surface units of different size. Select utensils having

flat bottoms large enough to cover the surface unit heating

element. The use of undersized utensils will expose a

portion of the heating element to direct contact and may

result in ignition of clothing. Proper relationship of utensil to

burner will also improve efficiency.

[] Never Leave Surface Units Unattended at High Heat

Settings - Boilover causes smoking and greasy spillovers

that may ignite.

[] Make Sure Reflector Pans or Drip Bowls Are in Place -

Absence of these pans or bowls during cooking may

subject wiring or components underneath to damage.

[] Protective Liners - Do not use aluminum foil to line surface

unit drip bowls or oven bottoms, except as suggested in

the manual. Improper installation of these liners may result

in a risk of electric shock, or fire.

[] Glazed Cooking Utensils - Only certain types of glass,

glass/ceramic, ceramic, earthenware, or other glazed

utensils are suitable for range-top service without breaking

due to the sudden change in temperature.

[] Utensil Handles Should Be Turned Inward and Not Extend

Over Adjacent Surface Units - To reduce the risk of burns,

ignition of flammable materials, and spillage due to

unintentional contact with the utensil, the handle of a

utensil should be positioned so that it is turned inward, and

does not extend over adjacent surface units.

[] Do Not Soak Removable Heating Elements - Heating

elements should never be immersed in water.

[] Do Not Cook on Broken Cooktop - If cooktop should

break, cleaning solutions and spillovers may penetrate the

broken cooktop and create a risk of electric shock. Contact

a qualified technician immediately.

[] Clean Cooktop With Caution - If a wet sponge or cloth is

used to wipe spills on a hot cooking area, be careful to

avoid steam burn. Some cleaners can produce noxious

fumes if applied to a hot surface.

[] Use Care When Opening Door - Let hot air or steam

escape before removing or replacing food.

[] Do Not Heat Unopened Food Containers - Build-up of

pressure may cause container to burst and result in injury.

[] Keep Oven Vent Ducts Unobstructed.

[] Placement of Oven Racks - Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN - Heating elements may be hot even

though they are dark in color. Interior surfaces of an oven

become hot enough to cause burns. During and after use,

do not touch, or let clothing or other flammable materials

contact heating elements or interior surfaces of oven until

they have had sufficient time to cool. Other surfaces of the

appliance may become hot enough to cause burns - among

these surfaces are oven vent openings and surfaces near

these openings, oven doors, and windows of oven doors.

For self-cleaning ranges -

[] Do Not Clean Door Gasket - The door gasket is essential

for a good seal. Care should be taken not to rub, damage,

or move the gasket.

[] Do Not Use Oven Cleaners - No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

[] Clean Only Parts Listed in Manual.

[] Before Self-Cleaning the Oven - Remove broiler pan and

other utensils.

For units with ventilating hood -

[] Clean Ventilating Hoods Frequently - Grease should not

be allowed to accumulate on hood or filter.

[] When flambeing foods under the hood, turn the fan on.

SAVE THESE INSTRUCTIONS

FEATUREGUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Customer Care section

of our website at www.amanacanada.ca for more detailed instructions.

Delay Doom Controls

Locked Locked

Hour

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

KEYPAD FEATURE INSTRUCTIONS

OVEN LIGHT Oven cavity light While the oven door is closed, press OVEN LIGHT to turn the light on and off. The oven light will

come on when the oven door is opened. The oven light will not come on during the Self-Clean

cycle.

TO LOCK Oven control

HOLD 3 SEC lockout

On models without the TO LOCK HOLD 3 SEC keypad, use the START keypad.

1. Check that the oven is off.

2. Press and hold TO LOCK HOLD 3 SEC keypad for 3 seconds (on some models, START

keypad for 3 seconds).

3. A tone will sound, and "Loc" will be displayed.

4. Repeat to unlock. Only the CLOCK, OVEN LIGHT, and TIMER keypads will function with the

controls locked.

CLOCK Clock The Clock uses a 12-hour cYclel

TIMER Oven timer The Timer can be set in hours or minutes up to 12 hours and 59 minutes.

1. Press TIMER.

2. Press TEMP/HOUR "More" or "Less" arrow pads to set the length of time.

3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of

countdown.

4. Press TIMER twice to cancel the Timer. Do not press the CANCEL/OFF keypad because the

oven will turn off.

5. If the TIMER is running, but not in the display, press TIMER to display the countdown for

5 seconds.

BAKE Baking and 1' Piess BAKE i

roast ng

i PressTEMPiHOUR More or !Less arrow pads to seta temperature other than

350°F(!75 C)in5 increments between 170 Fond525 F(75 Cand275 C).

3' Press START.

4. To Change the temperature iepeat step 2! Press START or wait 5 seconds for the change to

take effect,

5, Press CANCEL!OFFwhen finished,

BROIL Broiling

Position cookware in oven and close door to broil stop position. The door should remain

open approximately 5" (12.7 cm).

Press BROIL.

Press TEMP/HOUR "More" or "Less" arrow pads to change the temperature in 5°F (5°C)

increments between 300°F and 525°F (150°C and 275°C).

Press START.

5. Press CANCEL!OFF when finished.

KEYPAD FEATURE INSTRUCTIONS

WARM Hold warm Food must be at Serving temperature before p acing it in the warmed ovenl

Press WARM:

2. Temperature is set at 1700F(75 OC)for 60 minutes (i i00 hoUr)i

.... 3, Press START.

4. Press CANCEL/OFF When finished. ................

COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length

(on some of time, and/or shut off automatically. Delay start should not be used for foods such as breads

models) and cakes because they may not bake properly.

Toset a Timed Cook or a Delayed Timed Cook see "Timed Cooking" section.

START TIME Delayed start The Start Time keypad is used to enter the starting time for an oven funCtion with a delayed start.

START Cooking start The Start pad begins any oven function. If Start is not pressed within 5 seconds, "PUSH?" or

"PSH" appears in the display. If Start is not pressed within 1 minute after pressing a keypad, the

function is canceled and the time of day is displayed.

CANCEL/OFF Range function The cancel/off keypad Stops any function except the Clock' Timer, and oven Control Lockout.

TEMP/HOUR

Temperature and The "More" or "Less" arrow pads are used to adjust time and temperature settings.

time adjust

COOKTOPUSE

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The control knobs can be set to anywhere between HI and LO.

Push in and turn to setting.

REMEMBER: When range is in use or (on some models)

during the Self-Cleaning cycle, the entire cooktop area may

become hot.

Hot Surface Indicator Light (on some models)

On ceramic glass models, the hot surface indicator light is located

on the console panel.

The hot surface indicator light will glow as long as any surface

cooking area is too hot to touch, even after the surface cooking

area is turned off.

Coil Elements and Burner Bowls (on some models)

Coil elements should be level for optimal cooking results. Burner

bowls, when clean, reflect heat back to the cooktop. They also help

catch spills.

Cookware should not extend move than 1/2"(1.3 cm) over the coil

element. If cookware is uneven or too large, it can produce excess

heat, causing the burner bowl to change color.

Dual Cooking Zone (on some models)

The Dual Cooking Zone offers flexibility depending on the size of

the cookware. Single size can be used inthe same way as a regular

element. The dual size combines both the single and outer element

and is recommended for larger size cookware.

Ceramic Glass (on some models)

The surface cooking area will glow red when an element is on. It

may cycle on and off to maintain the selected heat level.

Use cookware about the same size as the surface cooking area.

Cookware should not extend more than 1/2"(1.3 cm) outside the

area.

Cleaning off the cooktop before and after each use will help keep it

free from stains and provide the most even heating.

Cooktop On Indicator Light (on some models)

The Cooktop On indicator light is located on the console panel.

When any control knob on the console panel is turned on, the

Cooktop On indicator light will glow.

ooo

DUAL O O SINGLE

A. Dual

B. Single

OVEN

Odors and smoke are normal when the oven is used the first few

times, or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to the

fumes given off. Exposure to the fumes may result in death to

certain birds. Always move birds to another closed and well-

ventilated room.

Control Display

The display willflash when powered up or after a power loss. Press

CANCEL/OFF to clear. When oven is not in use, the time of day is

displayed. Indicator lights show functions that are in use.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

• Valid pad press

• Oven is preheated (long tone)

• Function has been entered

• Reminder (on some models), repeating each minute after the

end-of-cycle tones

Three tones

• Invalid pad press

Four tones

• End of cycle

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to

Celsius.

To change: Press and hold BROIL for 5 seconds. A tone will

sound, and "°C" or "°F" will appear on the display. Repeat to

change back.

To exit mode, press CANCEL!OFR

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven

temperature because opening the oven door may cause element

cycling to give incorrect readings.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature

calibration can be adjusted. It can be changed in Fahrenheit or

Celsius.

To Adjust Oven Temperature Calibration:

1. Press and hold BAKE for 5 seconds until the oven display

shows the current calibration, for example "0°F CAL" or "00."

2. Press the TEMP/HOUR "More" or "Less" arrow pads to

increase or to decrease the temperature in 10°F (5°C) amounts.

The adjustment can be set between 30°F (15°C) and -30°F

(-15°C).

3. Press START.

Options Mode

Press and hold TIMER for 5 seconds, and "Opt" will appear. Use

the TEMP/TIME keys to cycle through the following options. Press

CANCEL to exit the mode.

End of Cycle Tones

"bl" (beep once) or "b" (continue to beep) will be displayed. Press

TIMER to toggle through selection.

USE

12-Hour Shutoff

If "12 Hr" is displayed, the oven will automatically shut off after

12 hours. Press TIMER to toggle to "- Hr" to disable the 12-hour

shutoff.

Oven Light with Door Open

"LOn" indicates that the oven light will turn on when the door is

open. If "LOFF" is displayed, the oven light will turn on only with the

oven light switch. Press TIMER to toggle through selection.

The Sabbath Mode sets the oven to remain on in a Bake setting

until turned off. A Timed Bake can also be set to keep the oven on

for only part of the Sabbath. The Oven Control Lockout Feature (if

present) will be disabled during the Sabbath Mode. After the

Sabbath Mode is set no tones will sound, the display will not show

the temperature, the Kitchen Timer Mode will be canceled (if active)

and only the following pads will function:

• "+" or "-" keypads (if present)

• "More" and "Less" keypads (if present)

• Cancel

When the oven door is opened or closed, the oven light will not turn

on or off and the heating elements will not turn on or off

immediately.

When power is restored after a power failure, the oven will return to

Sabbath Mode and remain Sabbath compliant with the bake

elements off until the Cancel keypad is pressed.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

Before entering the Sabbath Mode, it must be decided if the oven

light is to be on or off for the entire Sabbath Mode period. If the

light is on when entering Sabbath Mode, it will remain on for the

entire time Sabbath Mode is in use. If the light is off when entering

Sabbath Mode, it will remain off for the entire time Sabbath Mode is

in use. Opening the oven door or pressing the Oven Light keypad

will not affect the oven light once Sabbath Mode has been entered.

If the oven has the Convection Bake feature, the oven light is

controlled by a separate Oven Light switch on the console. If the

oven light is on when entering the Sabbath Mode, it will remain on

for the entire time Sabbath Mode is in use. For the oven light to be

off during the Sabbath Mode, the light bulb must be removed from

the oven prior to entering the Sabbath Mode. Not performing these

steps will cause the oven light to turn on when the oven door is

opened, resulting in the oven being not Sabbath compliant.

On the Holiday, the oven temperature can be changed once the

oven is in Sabbath Mode by pressing the "+" or "-" keypads (if

present) or the "More" or "Less" keypads (if present). The oven

temperature will change 25°F (14°C) each time the keypad is

pressed. The display will not change, and there will be no sounds

during this adjustment.

To Bake using Sabbath Mode:

1. Press BAKE.

Press the "+" or "-" keypads (if present) or "MORE" or "LESS"

keypads (if present).

Press START.

Press and hold the TIMER keypad for 5 seconds, "SAb" will

flash in the display.

5. Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. "SAb" will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

To set a Timed Bake using Sabbath Mode

(on some models):

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

1. Press BAKE.

Press the "+" or "-" keypads (if present) or "MORE" or "LESS"

keypads (if present) to enter a temperature other than the one

displayed.

Press COOK TIME. The Cook Time oven indicator light will light

up.

Press the "+" or "-" keypads (if present) or "MORE" or "LESS"

keypads (if present) to enter a cook time length.

Press START.

Press and hold the TIMER keypad for 5 seconds. "SAb" will

flash in the display.

Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. "SAb" will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant. The On and Timer indicator lights

will be displayed.

When the start time is reached the Bake and On indicator lights will

automatically turn on. When the set cook time ends, the oven will

shut off automatically and the indicator lights will turn off, indicating

the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

To set a Delayed Timed Bake using Sabbath Mode

(on some models):

1. Press BAKE.

2. Press the "+" or "-" keypads (if present) or "MORE" or "LESS"

keypads (if present) to enter a temperature other than the one

displayed.

3. Press COOK TIME. The Cook Time oven indicator light will light

up.

4. Press the "+" or "-" keypads (if present) or "MORE" or "LESS"

keypads (if present) to enter a cook time length.

5. Press START TIME or DELAY START.The Start Time/Delay

Start indicator light will light up.

6. Press the "+" or "-" keypads (if present) or "MORE" or "LESS"

keypads (if present) to enter a start time.

7. Press START.

Press and hold the TIMER keypad for 5 seconds. "SAb" will

flash in the display.

Press START within 5 seconds to enter Sabbath Mode;

otherwise, the entire cycle cancels out. "SAb" will stop flashing

and remain on in the display. The oven is now in Sabbath Mode

and is Sabbath compliant. The On and Delay indicator lights

will be displayed.

When the start time is reached the Bake and On indicator lights will

automatically turn on. When the set cook time ends, the oven will

shut off automatically and the indicator lights will turn off, indicating

the end of the cycle.

Pressing the Cancel keypad at any time returns the oven to the

normal cooking mode (not Sabbath Mode compliant).

IMPORTANT: To avoid permanent damage to the oven bottom For best cooking results, do not cover entire oven rack with foil

finish, do not line the oven bottom with any type of foil or liner, because air must be able to move freely.

IMPORTANT: To avoid permanent damage to the porcelain finish,

do not place food or bakeware directly on the oven door or bottom.

Bakeware

To cook food evenly, hot air must be able to circulate. Allow

2" (5 cm) of space around bakeware and oven walls. Make sure

that no bakeware piece is directly over another.

Racks

• Position racks before turning on the oven.

• Do not move racks with bakeware on them.

• Make sure racks are level.

To move a rack, pull it out to the stop position, raise the front edge,

and then lift out. Use the following illustration and charts as a

guide.

5_J

2..............i

Rack Positions

Rack 5: Toasting bread or broiling thin, non-fatty foods.

Rack 4: Use for 2-rack baking and broiling.

Rack 3: Most baked goods on a cookie sheet or jelly roll pan, layer

cakes, frozen convenience foods. Broiling chicken pieces.

Rack 2: Roasting small cuts of meat, pies, casseroles, bundt

cakes, and 2-rack baking.

Rack 1: Roasting large cuts of meat and poultry.

Multiple Rack Cooking

2-rack: Use rack positions 2 and 4.

Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks, use racks 2 and 4

for baking. Place the cakes on the racks as shown.

A. Oven vent (ceramic

glass model)

A. Oven vent (coil

elementmodel)

The oven vent releases hot air and moisture from the oven, and

should not be blocked or covered. Blocking or covering the vent

will cause poor air circulation, affecting cooking and cleaning

results. Do not set plastics, paper or other items that could melt or

burn near the oven vent.

On coil element models, the element can be used when the oven is

in use as long as the cookware does not extend more than

1/2"(1.3 cm) over the element.

The bake and broil burners cycle on and off in intervals. This

feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to

"Positioning Racks and Bakeware" section. When roasting, it is not

necessary to wait for the oven preheat cycle to end before putting

food in unless it is recommended in the recipe.

Preheating

When START is pressed, the oven will begin preheating. Once

100°F (38°C) is reached, the display temperature will increase as

the actual temperature of the oven increases. When the preheat

temperature is reached, a tone will sound, and the selected

temperature will appear on the display.

Broiling uses direct radiant heat to cook food. Changing the

temperature when Custom Broiling allows more precise control

when cooking. The lower the temperature, the slower the cooking.

Thicker cuts and unevenly shaped pieces of meat, fish and poultry

may cook better at lower broiling temperatures.

• For best results, use a broiler pan and grid. It is designed to

drain juices and help avoid spatter and smoke.

Ifyou would like to purchase a broiler pan, one may be ordered.

Please refer to the cover for contact information. Ask for Part

Number 4396923.

It is not necessary to preheat the oven before putting food in unless

recommended in the recipe. Position food on grid in a broiler pan,

then place it in the center of the oven rack. Close the door to the

broil stop position to ensure proper broiling temperature.

_T'!_ _ _ ..... . _ _. • , ,

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

To Set a Timed Cook:

1. Press BAKE. The bake indicator light will light up.

2. Press the TEMP/HOUR "More" or "Less" arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press the TEMP HOUR "More" or "Less" arrow pads to enter

the length of time to cook.

5. Press START. The display will count down the time. When the

time ends, the oven will shut off automatically and "End" will

appear on the display.

6. Press CANCEL/OFF to clear the display.

To Set a Delayed Timed Cook:

Before setting, make sure the clock is set to the correct time of day.

See the "Clock" keypad feature in the "Feature Guide" section.

1. Press BAKE.

2. Press the TEMP HOUR "More" or "Less" arrow pads to enter a

temperature other than the one displayed.

3. Press COOK TIME. The cook time oven indicator light will light

up.

4. Press TEMP HOUR "More" or "Less" arrow pads to enter the

length of time to cook.

5. Press START TIME. The start time/delay oven indicator light will

light up.

6. Press TEMP HOUR "More" or "Less" arrow pads to enter the

time of day to start.

7. Press START.

When the start time is reached, the oven will automatically turn on.

The temperature and/or time settings can be changed anytime

after pressing Start by repeating steps 1-7. When the set cook time

ends, the oven will shut off automatically and "End" will appear on

the display.

8. Press CANCEL!OFF to clear the display.

RANGECARE

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

IMPORTANT: The health of some birds is extremely sensitive to the

fumes given off during the Self-Cleaning cycle. Exposure to the

fumes may result in death to certain birds. Always move birds to

another closed and well-ventilated room.

Do not block the oven vent(s) during the Self-Cleaning cycle. Air

must be able to move freely. Depending on your model, see "Oven

Vent" section.

Do not clean, rub, damage or move the oven door gasket.

Prepare Range

• Remove the broiler pan, grid, cookware and bakeware, all

cooking utensils, oven racks and aluminum foil and, on some

models, the temperature probe from the oven.

Use a damp cloth to clean inside door edge and the

11/2"(3.8 cm) area around the inside oven cavity frame, being

certain not to move or bend the gasket.

Remove plastic items from the cooktop because they may

melt.

Remove all items from the storage drawer.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the

oven may result in discoloring, loss of gloss, hairline cracks and

popping sounds.

Before self-cleaning, make sure the door is completely closed or

the door will not lock and the self-cleaning cycle will not begin.

Once the oven has completely cooled, remove ash with a damp

cloth. To avoid breaking the glass, do not apply a cool damp cloth

to the inner door glass before it has completely cooled.

To stop the self-cleaning cycle at anytime, press the CANCEL

keypad. If the temperature is too high, the oven door will remain

locked and "cool" and "locked" will be displayed.

The oven light will not function during the self-cleaning cycle.

Style 1 - Electronic Oven Control with Adjustable Clean

Time (on some models)

The SELF CLEAN self-cleaning cycle is time adjustable between

2 hours 30 minutes and 4 hours 30 minutes in 15-minute

increments. Suggested clean times are 2 hours 30 minutes for light

soil, and 4 hours 30 minutes for heavy soil. The last 30 minutes of

the cycle is for cool down.

To Self-Clean:

1. Press SELFCLEAN.

2. Press the TEMP/HOUR "More" or "Less" arrow pads to enter

the desired self-clean cycle time.

3. Press START.

The oven door will automatically lock. The DOOR LOCKED and

CLEAN indicator lights will be displayed. The time remaining

will also be displayed.

4. When the self-clean cycle is complete and the oven cools, the

DOOR LOCKED and CLEAN indicator lights will turn off.

5. When the oven is completely cooled, remove ash with a damp

cloth.

Style 2 - Electronic Oven Control with Adjustable Self-Clean

(HI - LO) (on some models)

The self-cleaning cycle can be set at HI self-clean time (4 hours

30 minutes) or LO self-clean time (3 hours 30 minutes). The

suggested clean times are 3 hours 30 minutes for light soil, or

4 hours 30 minutes for heavy soil. The last 30 minutes of the cycles

is for cool down.

To Self-Clean:

1. Press SELF CLEAN to set the clean time to HI (4 hours

30 minutes).

2. Press the TEMP/HOUR "More" or "Less" arrow pads to cycle

between LO and HI clean time.

3. Press START.

The oven door will automatically lock. The CLEAN indicator

light will be displayed. The time remaining will also be

displayed.

4. When the self-clean cycle is complete and the oven cools, the

CLEAN indicator light will turn off.

5. When the oven is completely cooled, remove ash with a damp

cloth.

IMPORTANT:Beforecleaning,makesureallcontrolsareoffand

theovenandcooktoparecool.Alwaysfollowlabelinstructionson

cleaningproducts.Foradditionalinformation,youcanvisitthe

CustomerCaresectionofourwebsiteatwww.amanacanada.ca.

Soap,waterandasoftclothorspongearesuggestedfirstunless

otherwisenoted.

EXTERIOR PORCELAIN ENAMEL SURFACES (on some

models)

Foodspills containing acids, such as vinegarand tomato, should

be cleaned assoon as the entire range is cool. These spills may

affect the finish.

Cleaning Method:

• Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad:

Gently clean around the model and serial number plate

because scrubbing may remove numbers.

• All-Purpose Appliance Cleaner Part Number 31682B (not

included):

See cover for contact information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner,

steel-wool pads, gritty washcloths or abrasive paper towels.

Damage may occur to stainless steel surfaces, even with one-time

or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

• Stainless Steel Cleaner and Polish Part Number 31462B (not

included):

See cover for contact information.

Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia or sodium hydroxide (lye) because paint surface may

stain.

CERAMIC GLASS (on some models)

Cleaning Method:

Cooktop Cleaner Part Number 31464B is recommended regularly

to help avoid scratches, pitting and abrasions and to condition the

cooktop.

Cooktop Scraper Part Number WA906B is also recommended for

stubborn soils. These can be ordered as accessories. See cover for

contact information. The Cooktop Scraper uses razor blades. Store

razor blades out of the reach of children.

Do not use steel wool, abrasive powder cleansers, chlorine bleach,

rust remover or ammonia because damage may occur.

Light to moderate soil

• Clean with paper towels or clean damp sponge

Sugary spills (jellies, candy, syrup)

• Clean with cooktop scraper and cooktop cleaner. Scrape off

sugary spills while the cooktop is still warm. You may want to

wear oven mitts while cleaning the cooktop.

Heavy soil, dark streaks, specks and discoloration

• Clean with Cooktop Cleaner or nonabrasive cleanser:

Burned-on soil

• Clean with Cooktop Cleaner and Cooktop Scraper.

Metal marks from aluminum and copper

• Clean with Cooktop Cleaner as soon as cooktop has cooled

down. The marks will not totally disappear, but after many

cleanings they will become less noticeable.

Tiny scratches and abrasions

• Use Cooktop Cleaner for scratches. Scratches and abrasions

do not affect cooking performance, and after many cleanings

they will become less noticeable.

COOKTOP CONTROLS

To avoid damage to the cooktop controls, do not use steel wool,

abrasive cleansers or oven cleaner.

Do not soak knobs. When replacing knobs, make sure knobs are in

the OFF position.

On some models, do not remove seals under knobs.

Cleaning Method:

• Soap and water:

Pull knobs straight away from control panel to remove.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths or abrasive paper

towels.

Cleaning Method:

• Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on

panel.

• All-Purpose Appliance Cleaner Part Number 31682B (not

included):

See cover for contact information.

COIL ELEMENTS (on some models)

Cleaning Method:

• Damp cloth: Make sure control knobs are off and elements are

cool.

Do not clean or immerse in water. Soil will burn off when hot.

BURNER BOWLS (on some models)

Before removing or replacing coil elements and burner bowls,

make sure they are cool and the control knobs are in the OFF

position.

Remove the coil element by pushing the edge of the coil element

toward the receptacle. Lift it enough to clear the burner bowl. Pull

the coil element straight away from the receptacle to remove. Lift

out the burner bowl.

Cleaning Method:

Chrome burner bowls

Wash frequently in warm, soapy water. (It is not recommended to

wash chrome bowls in a dishwasher). A mild abrasive cleaner and a

plastic scrubber can be used to remove stubborn stains.

For heavily soiled bowls, place an ammonia soaked paper towel on

the stains and allow to soak for a short time, then gently scrub with

a plastic scrubber.

SURFACE UNDER COOKTOP (on some models)

The coil cooktop will lift up to provide easy access for cleaning

beneath. Lift the cooktop by both front corners until the support

locks into place.

Cleaning Method:

• Glass cleaner, mild liquid cleaner or nonabrasive scrubbing

pad.

• All-Purpose Appliance Cleaner Part Number 31682B (not

included):

See cover for contact information.

To avoid damage to the range, do not remove the cooktop.

OVEN RACKS

Cleaning Method:

• Steel-wool pad

• For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

STORAGE DRAWER

Check that storage drawer is cool and empty before cleaning.

Cleaning Method:

• Mild detergent

The oven light is a standard 40-watt appliance bulb. Before

replacing, make sure the oven and cooktop are cool and the

control knobs are in the off position.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

To Replace: 4. Replace bulb, then bulb cover by turning clockwise.

1. Unplug range or disconnect power. 5. Plug in range or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference the Customer Care section to possibly avoid the cost of

a service call.

www.amanacanada.ca

Nothing will operate

• Is the power supply cord unplugged?

Plug into a grounded outlet.

Has a household fuse blown, or has a circuit breaker

tripped?

Replace the fuse or reset the circuit breaker. If the problem

continues, call a qualified electrician.

Cooktop will not operate

• Is the control knob set correctly?

Push in knob before turning to a setting.

• On ceramic glass models, is the oven control lockout set?

See the control lock keypad feature in the "Feature Guide"

section.

• Has a self-clean cycle been selected?

On some ceramic glass models, the cooktop will not operate

during a self-clean cycle.

Excessive heat around cookware on cooktop

• Is the cookware the proper size?

Use cookware about the same size as the surface cooking

area, element or surface burner. Cookware should not extend

more than 1/2"(1.3 cm) outside the cooking area.

Cooktop cooking results not what expected

• Is the control knob set to the proper heat level?

See "Cooktop Use" section.

• Is the range level?

Level the range. See the Installation Instructions.

Oven will not operate

• Is the electronic oven control set correctly?

See "Electronic Oven Controls" section.

Has a delay start been set?

See "Timed Cooking" section.

On some models, is the oven control lockout set?

See the control lock keypad feature inthe "Feature Guide"

section.

Oven temperature too high or too low

• Does the oven temperature calibration need adjustment?

See "Oven Temperature Control" section of the "Electronic

Oven Controls" section.

Oven indicator lights flash

• Do the oven indicator lights flash?

See "Control Display" in the "Electronic Oven Controls"

section. If the indicator light(s) keeps flashing, call for service.

See cover for contact information.

Appliance outlet will not operate

• Has the outlet circuit breaker been tripped?

Reset circuit breaker switch. If the problem continues, call a

qualified electrician.

Display shows messages

• Is the display showing a flashing time?

There has been a power failure. Clear the display. On some

models, reset the clock, if needed. See "Clock" keypad feature

in the "Feature Guide" section.

Is the display showing a letter followed by a number?

Press the CANCEL keypad to clear the display. See "Control

Display" in the "Electronic Oven Controls" section. If it

reappears, call for service. See cover for contact information.

Is the display showing a flashing "PUSH?" or "PSH"?

See the "Start" keypad feature in the "Feature Guide" section.

Self-Cleaning cycle will not operate

• Is the oven door open?

Close the oven door all the way.

• Has the function been entered?

See "Self-Cleaning Cycle" section.

• Has a delay start been set?

See "Timed Cooking" section.

Is the proper temperature set?

Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set?

See "Oven Temperature Control" section of the "Electronic

Oven Controls" section.

Was the oven preheated?

See "Baking and Roasting" section.

Are the racks positioned properly?

See "Positioning Racks and Bakeware" section.

Is there proper air circulation around bakeware?

See "Positioning Racks and Bakeware" section.

Is the batter evenly distributed in the pan?

Check that batter is level in the pan.

Is the proper length of time being used?

Adjust cooking time.

Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer

cooking times.

Are baked items too brown on the bottom?

Move rack to higher position in the oven.

Oven cooking results not what expected

• Is the range level?

Level the range. See the Installation Instructions.

Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust and/or reduce

baking temperature.

ACCESSORIES

Canning Unit Kit

(coil element models)

Order Part Number 242905

Cooktop Care Kit

(includes cleaner, protectant, and

applicator pads)

Order Part Number 31605B

Cooktop Protectant

Order Part Number 31463B

Cooktop Cleaner

(ceramic glass models)

Order Part Number 31464B

Cooktop Scraper

(ceramic glass models)

Order Part Number WA906B

Stainless Steel Cleaner and Polish

(stainless steel models)

Order Part Number 31462B

All-Purpose Appliance Cleaner

Order Part Number 31682B

Split-Rack with Removable Insert

Order Part Number 4396927

Broiler Pan

Order Part Number 4396923

AMANA®MAJORAPPLIANCEWARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Amana brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter "Amana") will pay for factory

specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by an Amana designated

service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in

the country in which it was purchased. Outside the 50 United States and Canada, this limited warranty does not apply. Proof of original

purchase date is required to obtain service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair

house fuses, or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty

coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is

contrary to published user or operator instructions and/or installation instructions.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance

with electrical or plumbing codes, or use of consumables or cleaning products not approved by Amana.

5. Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Amana within 30 days from the date of purchase.

6. Any food loss due to refrigerator or freezer product failures.

7. Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be

repaired in the home and only in-home service is covered by this warranty.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Amana servicer is not available.

10. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with

published installation instructions.

11. Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is

void if the factory applied serial number has been altered or removed from your major appliance.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED

HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. AMANA SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS,

SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

If outside the 50 United States and Canada, contact your authorized Amana dealer to determine if another warranty applies. 9/07

For additional product information, visit www.amanacanada.ca

Ifyou do not have access to the Internet and you need assistance using your product or you would like to schedule service, you may

contact Amana at the number below.

Have your complete model number ready. You can find your model number and serial number on the oven frame behind the storage

drawer panel.

For assistance or service, call 1-800-807-6777.

Ifyou need further assistance, you can write to Amana with any questions or concerns at the address below:

Amana Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Please include a daytime phone number in your correspondence.

Please keep these User Instructions and model number information for future reference.

MERCId'avoiracheteceproduitdegrandequalite.SivousrencontrezunproblemenonabordeAlasectionDI_PANNAGE,veuillez

visiternotresiteWebawww.amanacanada.capourobtenirdesinformationssupplementaires.Sivousaveztoujoursbesoind'aide,

composezle1-800-807-6777.

VousdevrezconnaTtrelesnum@osdemodeleetdes@iequisetrouventsurlech&ssisdufour,derrierelepanneaudutiroirde

remisage.

TableDes Mati res

SleCURITle DE LA CUISINIERE ............................................................ 15

La bride antibasculement ................................................................... 15

GUIDE DES CARACTleRISTIQUES ..................................................... 18

UTILISATION DE LA TABLE DE CUISSON ........................................ 19

UTILISATION DU FOUR ....................................................................... 20

Commandes _lectroniques du four ................................................... 20

Mode Sabbat (sur certains modeles) ................................................. 20

Papier d'aluminium ............................................................................. 21

Positionnement des grilles et des ustensiles de cuisson au four ...... 22

Event du four ...................................................................................... 22

Cuisson au four et r6tissage .............................................................. 22

Cuisson au gril .................................................................................... 22

Cuisson minut_e (sur certains modeles) ............................................ 23

ENTRETIEN DE LA CUISINI#RE ......................................................... 23

Programme d'autonettoyage (sur certains modeles) ........................ 23

Nettoyage gen@al .............................................................................. 24

Lampe du four .................................................................................... 25

DI_PANNAGE ......................................................................................... 26

AOCESSOIRES ...................................................................................... 27

GARANTIE ............................................................................................. 27

# # •

SECURITEDELACUISINIERE

Votre securite et celle des autres est tres importante.

Nous donnons de nombreux messages de s_curit_ importants dans ce manuel et sur votre appareil m_nager. Assurez-vous de

toujours lire tousles messages de s_curit_ et de vous y conformer.

Voici le symbole d'alerte de s_curit&

Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_c_s et de blessures graves & vous

et & d'autres.

Tousles messages de s_curit_ suivront le symbole d'alerte de s_curit_ et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient •

Risque possible de d_cbs ou de blessure grave si vous ne

suivez pas imm_diatement les instructions.

Risque possible de d_cbs ou de blessure grave si vous

ne suivez pas les instructions.

Tousles messages de s_curit_ vous diront quel est le danger potentiel et vous disent comment r_duire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Dans les conditions de service normales, la cuisiniere ne bascule pas. Elle peut cependant basculer si une force ou un poids excessif est

appliqu6(e) sur la porte ouverte alors que la bride antibasculement n'est pas convenablement fixee.

La bride antibasculement

Le pied dela cuisiniere

Risque de basculement

Un enfant ou une personne adulte peut faire basculer la cuisini_re ce qui peut causer un d_c_s.

Joindre la bride antibasculement au pied arri_re de la cuisini_re.

Joindre de nouveau la bride antibasculement si la cuisini_re est d_plac_e.

Voir d_tails dans les instructions d'installation.

Le non-respect de ces instructions peut causer un d_c_s ou des brQlures graves aux enfants et

aux adultes.

Assurez-vous qu'une bride antibasculement est install_e :

• Glisser la cuisinibre vers ravant.

• V_rifier que la bride antibasculement est bien fix_e au plancher.

• Glisser de nouveau la cuisinibre vers rarribre de sorte que le pied est sous la bride

antibasculement.

IMPORTANTES INSTRUCTIONS DE SECURITE

AVERTISSEMENT : Pour r6duire le risque d'incendie, de

choc 61ectrique, de blessures ou de dommages Iors de

I'utilisation de la cuisini@e, il convient d'observer certaines

pr6cautions 616mentaires dont les suivantes :

• AVERTISSEMENT • POUR MINIMISER LE RISQUE

DE BASCULEMENT DE LA CUISINIERE, ELLE DOlT

€:TRE BIEN IMMOBILISC:E PAR DES DISPOSITIFS

ANTIBASCULEMENT CORRECTEMENT INSTALL¢:S.

POUR VC:RIFIER SI LES DISPOSITIFS SONT

CORRECTEMENT INSTALL¢:S, GLISSER LA CUISINIERE

VERS L'AVANT ET VC:RIFIER SI LA BRIDE

ANTIBASCULEMENT EST BIEN FlXC:E AU PLANCHER,

ET GLISSER LA CUISINIERE VERS L'ARRIERE POUR

QUE LE PIED ARRIERE DE LA CUISINIERE SOIT SOUS

LA BRIDE ANTIBASCULEMENT.

• MISE EN GARDE : Ne pas remiser dans des armoires

au-dessus de la cuisini@e ou sur le dosseret d'une

cuisini@e, des objets que des enfants pourraient vouloir

atteindre. Les enfants pourraient se brt_ler ou se blesser en

grimpant sur la cuisini@e.

• Installation appropri6e - S'assurer que la cuisini@e est

correctement install6e et reli6e & la terre par un technicien

qualifi6.

• Ne jamais utiliser la cuisini@e pour r6chauffer ou chauffer

la piece.

• Ne pas laisser les enfants seuls - Les enfants ne doivent

pas 6tre laiss6s seuls ou sans surveillance dans la piece

o(_la cuisini@e est en service. Ne jamais laisser les

enfants s'asseoir ou se tenir sur une partie quelconque de

la cuisini@e.

• Porter des v6tements appropri6s - Des v6tements amples

ou d6tach6s ne doivent jamais 6tre port6s pendant

I'utilisation de la cuisini@e.

• Entretien par I'utilisateur - Ne pas r6parer ni remplacer

toute piece de la cuisini@e si ce n'est pas sp6cifiquement

recommand6 dans le manuel. Toute autre op6ration

d'entretien ou de r6paration doit 6tre confi6e & un

technicien qualifi6.

• Remisage dans ou sur la cuisini_re - Des mat6riaux

inflammables ne doivent pas 6tre remis6s dans un four ou

pros des 616ments de surface.

• Ne pas utiliser d'eau pour 6teindre un feu de graisse -

¢:touffer le feu ou les flammes ou utiliser un extincteur

produits chimiques secs, ou un extincteur a mousse.

• N'utiliser que des mitaines s_ches de four - Des mitaines

de four mouill6es ou humides sur des surfaces chaudes

peuvent provoquer des br01ures provenant de la vapeur.

Ne pas laisser les mitaines de four toucher les 616ments

chauffants. Ne pas utiliser une serviette ou un tissu 6pais.

• NE PAS TOUCHER LES ¢:LI2MENTS DE SURFACE OU

L'ESPACE PRF:S DES ¢:LEMENTS - Les 616ments de

surface peuvent 6tre chauds m6me Iorsqu'ils ont une teinte

fonc6e. Les endroits pros des 616ments de surface peuvent

devenir assez chauds pour causer des br01ures. Pendant

et apr_s I'utilisation, ne pas toucher les 616ments

chauffants et ne pas laisser les v6tements ou autres

mat6riaux inflammables entrer en contact avec ces

616ments de surface ou les endroits pros des 616ments,

avant qu'ils soient suffisamment refroidis. Ces endroits

comprennent la table de cuisson et les surfaces pros de la

table de la cuisson.

• Utiliser des ustensiles de dimension appropri6e - La

cuisini@e est munie d'un ou de plusieurs 616ments

chauffants de diff6rentes grandeurs. Choisir les ustensiles

qui ont un fond plat assez grand pour couvrir 1'616ment

chauffant de la surface de cuisson. L'utilisation d'ustensiles

trop petits exposera une partie de 1'616ment chauffant, ce

qui peut provoquer I'inflammation des v6tements.

L'utilisation d'un r6cipient de dimension correcte am61iore

aussi I'efficacit6 de la cuisson.

• Ne jamais laisser les 616ments de la table de cuisson sans

surveillance alors qu'ils chauffent a la puissance maximale.

II pourrait en r6sulter une 6bullition qui cause de la fum6e

et des renversements de corps gras qui peuvent

s'enflammer.

• S'assurer que les cuvettes r6fl6chissantes ou les bols de

renversement sont en place - L'absence de ces cuvettes

ou bols au cours de la cuisson peut causer des dommages

aux ills ou aux composants en dessous des 616ments.

• Garnissages protecteurs - Ne pas recouvrir les cuvettes

ou le fond du four de papier d'aluminium sauf tel que

sugg6r6 dans le manuel. L'installation incorrecte de papier

d'aluminium ou d'autre mat6riau peut causer un risque de

choc 61ectrique ou d'incendie.

• Ustensiles de cuisson vitrifi6s - Seulement certains types

d'ustensiles de verre, vitroc6ramique, c6ramique, fai'ence

ou autres surfaces vitrifi6es conviennent pour le service

sur une table de cuisson, sans bris attribuables aux

changements soudains de temp6rature.

• Les poign6es des ustensiles doivent 6tre tourn6es vers

I'int6rieur et non vers le dessus des 616ments adjacents -

Pour r6duire le risque de br01ures, d'inflammation de

produits inflammables et de renversements dus

I'entrechoquement non intentionnel des ustensiles, la

poign6e d'un ustensile doit 6tre positionn6e de sorte

qu'elle est tourn6e vers I'int6rieur et non au-dessus des

616ments de surface adjacents.

• Ne pas tremper les 616ments de chauffage amovibles -

Les 616ments de chauffage ne doivent jamais 6tre

immerg6s dans I'eau.

• Ne pas faire cuire sur une table de cuisson endommag6e -

Si la table de cuisson est bris6e, les solutions de nettoyage

et les renversements peuvent p6n6trer dans la table de

cuisson bris6e et cr6er un risque d'un choc 61ectrique.

Contacter imm6diatement un technicien qualifi6.

CONSERVEZ CES INSTRUCTIONS

IMPORTANTES INSTRUCTIONS DE SECURITE

• Nettoyer la table de cuisson avec prudence - Si une

6ponge ou un chiffon mouill6 est utilis6 pour essuyer les

renversements sur une surface de cuisson chaude, 6viter

les brt]lures caus6es par la vapeur chaude. Certains

nettoyants peuvent produire des 6manations d6sagr6ables

Iorsqu'ils sont utilis6s sur une surface chaude.

• Exercer une grande prudence Iors de I'ouverture de la

porte - Laisser I'air chaud ou la vapeur s'6chapper avant

d'enlever ou de replacer un plat.

• Ne pas faire chauffer des contenants ferm6s -

L'accumulation de pression peut causer une explosion du

contenant et des blessures.

• Ne jamais obstruer les ouvertures des 6vents.

• Positionnement des grilles du four - Toujours placer les

grilles du four en position d6sir6e pendant que le four est

froid. Si la grille doit 6tre d6plac6e pendant que le four est

chaud, ne pas laisser les mitaines de four toucher 1'616ment

chaud du four.

• NE PAS TOUCHER LES 12LI2MENTS CHAUFFANTS OU

LES SURFACES INTI2RIEURES DU FOUR - Les

616ments chauffants peuvent 6tre chauds m6me s'ils ont

une teinte fonc6e. Les surfaces int6rieures d'un four

deviennent assez chaudes pour causer des brt]lures.

Pendant et apr_s I'utilisation, ne pas toucher ou laisser des

v6tements ou autres mat6riaux inflammables venir en

contact avec les 616ments chauds ou les surfaces

int6rieures chaudes du four avant qu'ils aient eu assez de

temps pour refroidir. D'autres surfaces de I'appareil

peuvent devenir assez chaudes pour causer des brt]lures.

Ces surfaces comprennent les ouvertures de 1'6vent du

four et les surfaces pros de ces ouvertures, les portes du

four, et les hublots des portes du four.

Pour les cuisini_res avec programme d'autonettoyage -

• Ne pas nettoyer le joint de la porte - Le joint de la porte

est essentiel pour 1'6tanch6it6. Veiller & ne pas frotter,

endommager ou d6placer le joint.

• Ne pas utiliser des produits commerciaux de nettoyage du

four - On ne doit pas utiliser un produit commercial de

nettoyage de four ou un enduit de protection des surfaces

internes du four quel qu'en soit le type, sur les surfaces du

four ou les surfaces voisines.

• Nettoyer uniquement les pi_ces indiqu6es dans le manuel.

• Avant d'ex6cuter le programme d'autonettoyage du four -

Oter la I_chefrite et son plat et les autres ustensiles.

Pour les appareils avec hotte de ventilation -

• Nettoyer les hottes de ventilation fr6quemment - La

graisse ne doit pas s'accumuler sur la hotte ou le filtre.

• Lorsque vous flambez des aliments sous la hotte, mettre le

ventilateur en marche.

CONSERVEZ CES INSTRUCTIONS

GUIDEDESCARACTERISTIQUES

Ce manuel couvre differents modeles. II est possible que votre modele ne comporte pas toutes les caracteristiques decrites. Consulter ce

manuel ou la section service a la clientele de notre site Web sur www.amanacanada.ca pour des instructions plus detaillees.

Hour

Risque d'empoisonnement alimentaire

Ne pas laisser des aliments dans un four plus d'une

heure avant ou apres la cuisson.

Le non-respect de cette instruction peut causer un

empoisonnement alimentaire ou une maladie.

CLAVIER CARACTERISTIQUE INSTRUCTIONS

OVEN LIGHT Lampe de la cavit_ Alors que la porte du four est fermee, appuyer sur OVEN LIGHT (lampe du four) pour allumer

(Lampe du four) du four ou eteindre la lampe. La lampe du four s'allume & I'ouverture de la porte. La lampe du four

ne s'allume pas durant le programme d'autonettoyage.

TO LOCK Verrouillage des Sur les modeles sans la touche TO LOCK HOLD 3 SEC (appuyer pendant 3 sec pour

HOLD 3 SEC commandes du four verrouiller), utiliser latouche START (mise en marche).

(appuyer 1. Verifier que le four est eteint.

pendant

3 secondes pour 2. Appuyer sur la touche TO LOCK HOLD 3 SEC (appuyer pendant 3 sec pour verrouiller)

verrouiller) (sur certains modeles, appuyer sur la touche START [mise en marche] pendant

3 secondes).

3. Un signal sonore se fait entendre et "Loc" apparaft sur I'afficheur.

4. Repeter pour deverrouiller. Seules les touches CLOCK, OVEN LIGHT, et TIMER (horloge,

lampe du four et minuterie) fonctionnent Iorsque les commandes sent verrouillees.

CLOCK (Horloge)Horloge L,hor!oge utilise un format de 12 heures aveC a:ml et

1, verifier que !e four est 6teint.

2. AppuYei sur CLOCK (hor!oge).

3. ApPuyeisuiiestouChesafleche 1-EMPiHOUR Moie ou Less (temperatureZheuie,

plus ou moins)pourregler!heure, ycomprisa_m;oup.ml

4. Appuyersur CLOCK (hor!oge)ou START (raise en marche).

TIMER Minuterie du four

(Minuterie)

La minuterie peut _tre reglee en heures ou en minutes jusqu'& concurrence de 12 heures et

59 minutes.

1. Appuyer sur TIMER (minuterie).

2. Appuyer sur les touches & fleche TEMP/HOUR "More" ou "Less" (temperature/heure,

"plus" ou "moins") pour regler la duree de cuisson.

3. Appuyer sur START (mise en marche) pour commencer le compte &rebours. Si actives,

les signaux sonores de fin de programme se font entendre &la fin du compte & rebours.

4. Appuyer deux fois sur TIMER (minuterie) pour annuler laminuterie. Ne pas appuyer sur

la touche CANCEL/OFF (annulation/arr_t) sinon le four s'eteindra.

5. Si la minuterie est activee mais n'apparaft pas sur I'affichage, appuyer sur TIMER

(minuterie) pour faire apparaftre le compte a rebours pendant 5 secondes.

BAKE (cUisson Cuisson au four et Appuyer Sur BAKE (cuisson au _our). , , , ,

au four) rot ssage

Less pour r6gieiune _

.............. temperature autre que 350 F (175 C)par tranches de5 entre !70 F et 525 F (75 C et

2750).

3' Appuyer sur START (mise en marche).

4. Pour modifier atempeiaturelrepeterl 6tape2iAppuyersursTARTouattendrependant

5 secondes pour que e changement pu sse s,effectuer.

5. Appuyer sur CANCEL/OFF (annulation/aFr_t) apr_s avoir terrain&

CLAVIER CARACTERISTIQUE INSTRUCTIONS

BROIL (cuisson Cuisson au gril 1. Placer I'ustensile de cuisson dans le four et fermer la porte & la position adequate de

au gril) cuisson au gril. La porte doit rester ouverte d'environ 5" (12,7 cm).

2. Appuyer sur BROIL (cuisson au gril).

3. Appuyer sur les touches & fleche TEMP/HOUR "More" ou "Less" pour modifier la

temperature par tranches de 5°F (5°C), entre 300°F et 525°F (150°C et 275°C).

4. Appuyer sur START (mise en marche).

5. Appuyer sur CANCEL/OFF (annulation/arret) apres avoir termin&

WARM (chaud) Garder chaud Les aliments doivent _tre & la tempdrature de service avant d,etre placds dans !e four chaud,

11 Appuyer sur wARM (Chaud)i

La tempdrature est idglde &170 F (75°c)pendant 60 minutes (i heure).

AppUyei sur START (mise en marChe).

4. Appuyer sur CANCEL!OFF (annu!ation/arret) apres avoir termin&

COOK TIME

(cuisson minuted

- sur certains

modules)

Cuisson minuted

La cuisson minuted permet d'allumer le four aune certaine heure de la journee, de faire

cuire pendant une duree reglde et/ou d'eteindre le four automatiquement. La mise en

marche differde ne doit pas _tre utilisee pour les aliments tels que pains et g&teaux car ils

risquent de ne pas bien cuire.

Pour regler une cuisson minuted ou une cuisson minuted diffdree, voir la section "Cuisson

minuted".

START TIME Mise en marche La touChe de I heure de raise en maiChe sert entrer ! heure demise en marche pour un

(heure de raise differed four 6qu p6 de raise en marche diffdrdei

en rnarche)

START (mise en Mise en marche de

marche) la cuisson

La touche Start active toutes les fonctions du four. Si I'on n'appuie pas sur Start (mise en

marche) dans les 5 secondes, "PUSH?" ou "PSH" (appuyer) apparait sur I'affichage. Si,

apres avoir appuye sur une touche, on n'appuie pas sur Start dans la minute qui suit, la

fonction est annulee et I'heure s'affiche.

CANCEL/OFF Fonction de la La touche cancel/Off (annelationiarr_t) ddsactive toutes les fonctions &I'exception de

(annulation!arr_t) cuisini_re I hor!oge, de !a minuterie et du verroui!!age des commandes du four.

TEMP/HOUR R_glage de

(temperature/ temperature et

heure) dur_e

Les touches a fleche "More" ou "Less" servent &regler la duree et la temperature.

UTILISATIONDELATABLEDECUISSON

Risque d'incendie

Fermer tous les r_glages Iorsque la cuisson est

termin_e.

Le non-respect de cette instruction peut causer un

d_ces ou un incendie.

Les boutons de commande peuvent _tre reglds a n'importe quelle

position entre HI et LO. Pousser et tourner le bouton au reglage

souhait&

N'OUBLIEZ PAS : Quand I'appareil est utilis6 ou (sur

certains modules) durant le programme d'autonettoyage,

toute la surface de la table de cuisson peut devenir chaude.

Vitroc_ramique (sur certains modules)

La surface de la zone de cuisson devient rouge Iorsqu'un eldment

est allum& II se peut qu'elle s'allume et s'eteigne par intermittence

afin de maintenir le niveau de chaleur selectionn&

Utiliser des ustensiles de cuisson qui soient environ de la m_me

taille que la surface de cuisson. L'ustensile de cuisson ne doit pas

depasser de plus de 1/2"(1,3 cm) de la zone de cuisson.

Essuyer la table de cuisson avant et apr_s chaque utilisation

permettra d'eviter les taches et d'assurer une meilleure repartition

de la chaleur.

T_moin d'allumage de la table de cuisson (sur certains

modules)

Le temoin lumineux de table de cuisson allumee se trouve sur le

panneau de la console. Lorsqu'un bouton de commande sur le

panneau de la console est active, letemoin lumineux de la table de

cuisson s'allume.

T_moin lumineux de surface chaude (sur certains modules)

Sur les modeles avec vitroceramique, letemoin lumineux de

surface chaude est situ_ sur le panneau de la console.

Le temoin de surface chaude reste allume tant qu'une surface de

cuisson est trop chaude pour _tre touched, m_me apr_s que la ou

les surface(s) de cuisson sont eteintes.

I_l_ments en spirale et cuvettes des br_leurs (sur certains

modules)

Pour des resultats de cuisson optimaux, les el6ments en spirale

doivent etre d'aplomb. Les cuvettes des brQleurs, Iorsqu'elles sont

propres, rabattent la chaleur vers les ustensiles de cuisson. Elles

permettent egalement de recueillir les renversements.

L'ustensile de cuisson ne doit pas depasser de plus de 1/2"(1,3 cm)

au-dessus de I'el6ment en spirale. Un ustensile de cuisson trop

grand ou qui ne serait pas uniforme peut conduire & une surchauffe

et entrainer un changement de couleur de la cuvette du brQleur.

Zone de cuisson _ double fonction (sur certains modules)

La zone de cuisson & double fonction offre une souplesse

d'utilisation en fonction de la taille de I'ustensile de cuisson. La

dimension simple peut etre utilisee de la meme maniere qu'un

el6ment ordinaire. La dimension double combine I'el6ment simple

et I'el6ment externe; elle est recommandee pour les ustensiles de

cuisson de plus grande dimension.

ooo

OUAL o o SINGLE

A. Double

B. Simple

UTILISATIONDUFOUR

Des odeurs et de la fumee sont normales Iorsque le four est utilise

les premieres fois, ou Iorsqu'il est tres sale.

IMPORTANT • La sante de certains oiseaux est tres sensible aux

emanations de fumee. L'exposition aux emanations peut entrainer

la mort de certains oiseaux. Toujours deplacer les oiseaux dans

une autre piece fermee et bien aer6e.

Afficheur du four

L'afficheur clignote Iorsqu'il est mis sous tension ou apres une

coupure de courant. Appuyer sur CANCEL/OFF (annulation/arret)

pour I'effacer. Lorsque le four n'est pas en marche, I'heure

s'affiche. Les temoins lumineux indiquent les fonctions qui sont

activees.

Signaux sonores

Les signaux sonores indiquent ce qul suit :

Fonctions de base

Un signal sonore unique

• Appui sur une touche valide

• Four prechauff6 (signal sonore long)

• Fonction entree

• Rappel (sur certains modeles), signal se rep6tant & intervalles

d'une minute apres les signaux sonores de fin de programme

Trois signaux sonores

• Appui sur une touche non valide

Quatre signaux sonores

• Fin de programme

Fahrenheit et Celsius

Le four est pr6r6gle pour un affichage de la temperature en degres

Fahrenheit, mais on peut permuter en degres Celsius.

Modification • Appuyer sur la touche BROIL (cuisson au gril)

pendant 5 secondes. Un signal sonore se fait entendre et "°C" ou

"°F" s'affichera. Repeter pour retourner &I'affichage precedent.

Pour sortir de ce mode, appuyer sur CANCEL!OFF (annulation/

arret).

Commande de la temperature du four

IMPORTANT : Ne pas utiliser de thermometre pour mesurer la

temperature du four car I'ouverture de la porte du four peut

provoquer des mesures incorrectes du brQleur a fonctionnement

par intermittence.

Le four fournit des temperatures precises; toutefois, il peut cuire

plus rapidement ou plus lentement que votre ancien four, c'est

pourquoi le calibrage de la temperature peut etre ajust& II peut etre

change en degres Fahrenheit ou en Celsius.

Ajustement du calibrage de la temperature du four :

1. Appuyer sur BAKE pendant 5 secondes jusqu'& ce que

I'afficheur du four indique le calibrage actuel, par exemple "0°F

CAL" ou "00".

2. Appuyer sur les touches &fleche TEMP/HOUR "More" ou

"Less" (temperature/heure "plus" ou "moins") pour augmenter

ou reduire la temperature par tranches de 10°F (5°C).

L'ajustement peut etre regle entre 30°F (15°C) et -30°F (-15°C).

3. Appuyer sur START (mise en marche).

Mode Options

Appuyer sur TIMER (minuterie) pendant 5 secondes et "Opt"

s'affiche. Utiliser les touches TEMP/TIME (temperature/duree) pour

faire defiler les options suivantes. Appuyer sur CANCEL

(annulation) pour sortir de ce mode.

Signaux sonores de fin de programme

"bl" (n'emet qu'un seul bip) ou "b" (continue & emettre des bips)

s'affiche. Appuyer sur TIMER (minuterie) pour passer d'une

selection & I'autre.

Arr6t au bout de 12 heures

Si "12 Hr" (12 heures) s'affiche, le four s'eteint automatiquement au

bout de 12 heures. Appuyer sur TIMER (minuterie) pour faire passer

I'affichage a "- Hr", afin de desactiver I'arret au bout de 12 heures.

Lumi_re du four avec porte ouverte

"LOn" indique que la lumiere du four s'allume Iorsque la porte est

ouverte. Si "LOFF" est affiche, la lumiere du four ne peut etre

allumee qu'au moyen de I'interrupteur. Appuyer sur TIMER

(minuterie) pour passer d'une selection & I'autre.

i I0(I_1: £=:_14'_,4

i,.i(I,IWI _111I,

Le mode Sabbat permet au four de continuer &fonctionner sur un

reglage de cuisson au four jusqu'& ce qu'on I'eteigne. Une cuisson

au four minutee peut egalement etre programmee pour garder le

four allume seulement pendant une partie du mode Sabbat. La

caracteristique de verrouillage des commandes du four (si

presente) est desactivee pendant le mode Sabbat. Une fois le

mode Sabbat regle, aucun signal sonore ne retentit, I'affichage

n'indique pas la temperature, le mode de minuterie de cuisine est

annule (si active) et seules les touches suivantes fonctionnent :

• touches "+" ou "-" (si presentes)

• touches "More" (plus) ou "Less" (moins) (si presentes)

• Cancel (annulation)

Lorsque la porte du four est ouverte ou fermee, la lampe du four ne

s'allume ou ne s'eteint pas et les elements de chauffage ne

s'allument ou ne s'eteignent pas immediatement.

Lorsque le courant est retabli apres une panne de courant, le four

retourne au mode Sabbat et conserve les modalites du mode

La page charge ...

Amana UPRIGHT FREEZER User Instructions

Marque: Amana

Modèle: UPRIGHT FREEZER

Catégorie: Cuisinières

Taper: User Instructions

Télécharger le PDF

rapport

dans d''autres langues

English: Amana UPRIGHT FREEZER

Amana UPRIGHT FREEZER User Instructions

Amana UPRIGHT FREEZER User Instructions

dans d''autres langues

Documents connexes

Autres documents