Samsung LED 9000 Le manuel du propriétaire

BN68-03088A-00

LED TV user manual

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs

Samsung.

Comuníquese con SAMSUNG WORLDWIDE

Si desea formular alguna pregunta o comentario en relación con los productos de Samsung, comuníquese con el centro de

atención al cliente de SAMSUNG.

Country

Customer Care Center

Web Site Address

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Canada

U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 105 Challenger

Road Ridgeeld Park, NJ 07660-0511

[UC9000_NA]BN68-03088A-00L03.indb 1 2010-05-10 오전 10:25:47

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and speciﬁcations may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.

The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to ﬁll the screen if your model offers this feature and

the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no expanded standard format

television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics

and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven

aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned

in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG)

products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service

in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the

warranty period originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited

Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service

Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those

encountered in normal use of the product.

Excluded, but not limited to, are any originally speciﬁed provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or

replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still image elements (such as TV channel logos, panorama or 4:3 image format, stock or news

bars at screen bottom etc.) on the screen. Constant displaying of a still picture can cause ghosting of the LED screen, which will affect image quality. To

reduce risk of this effect, please follow the recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display a full screen image.

• Reducing brightness and contrast will help to avoid the appearance of after-images.

• Use all TV features designed to reduce image retention and screen burn, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

Installation with a stand. Installation with a wall-mount.

4 inches

[UC9000_NA]BN68-03088A-00L03.indb 2 2010-05-10 오전 10:25:48

3

Contents

ENGLISH

English

Getting Started

y List of Features ......................................................... 4

y Accessories .............................................................. 4

y Viewing the Control Panel ......................................... 5

y Mini Remote Control ................................................. 6

y Viewing the Touch Control ........................................ 7

y Connecting to an Antenna ...................................... 10

y Plug & Play (Initial Setup) ......................................... 10

Connections

y Connecting to an AV Device .................................... 11

y Connecting to an Audio Device ............................... 13

y Connecting to a PC ................................................ 14

y Changing the Input Source ..................................... 15

Basic Features

y How to Navigate Menus .......................................... 15

y Channel Menu ........................................................ 16

Seeing Channels 16

Using Favorite Channels 16

Memorizing Channels 16

Editing Channels 17

Other Features 17

y Picture Menu .......................................................... 18

Changing the Preset Picture Mode 18

Adjusting Picture Settings 18

Economical Solutions 18

Changing the Picture Options 19

Viewing TV using the 3D function 21

Setting up the TV with Your PC 24

y Sound Menu ........................................................... 24

Changing the Preset Sound Mode 24

Adjusting Sound Settings 24

Sound Settings 25

y Setup Menu ............................................................ 26

Setting the Time 26

Using the Sleep Timer 26

Setting the On / Off Timer 26

Locking Programs 27

Other Features 28

y Support Menu ......................................................... 30

Advanced Features

y Network Connection ............................................... 32

Connecting to a Wired Network 32

Connecting to a Wireless Network 34

y Media Play .............................................................. 39

Connecting a USB Device 39

Connecting to your PC through a network 39

Screen Display 41

Playing Multiple Files 44

Media Play - Additional Functions 44

y Anynet+ .................................................................. 46

Setting Up Anynet+ 47

Switching between Anynet+ Devices 47

Recording 48

Listening through a Receiver 48

Troubleshooting for Anynet+ 49

y Internet@TV ............................................................ 50

Getting Started with Internet@TV 50

Setting up Internet@TV 51

Using the Internet@TV service 53

PROFILE Widget 55

Widget Gallery 55

Troubleshooting for Internet@TV 56

Help Website 56

y AllShare .................................................................. 57

About AllShare 57

Setting Up AllShare 57

Other Information

y Assembling the Cables ........................................... 59

y Securing the TV to the Wall ..................................... 60

y Troubleshooting ...................................................... 61

y Enclosed Wireless LAN Adapter .............................. 64

y License ................................................................... 65

y Speciﬁcations ......................................................... 65

y Dimensions ............................................................. 66

y Index ...................................................................... 67

y Regulatory Compliance Information......................... 68

Check the Symbol!



TOOLS

Note Step by Step Guide

This function can be used by pressing the

TOOLS button on the remote control.

Indicates additional information. Check here for instructions on how to open

the relevant submenu within the OSD (on

screen display).

[UC9000_NA]BN68-03088A-00L03.indb 3 2010-05-10 오전 10:25:50

4

English

Getting Started

List of Features

y Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed

without a cable box / STB (Set-Top-Box) satellite receiver.

y Media Play: Allows you to play music ﬁles, pictures, and movies saved on a USB device (p. 39).

y Internet@TV: You can use various internet services and view useful information and entertaining content (p. 50).

y AllShare: AllShare connects your TV and compatible Samsung mobile phones/devices through a network (p. 57).

y Self Diagnosis: You can check whether picture or sound operate normally (p. 30).

y 3D: This exciting new feature enables you to view 3D content.

Accessories

✎

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

✎

The items' colors and shapes may vary depending on the models.

y Owner’s Instructions

y Cleaning Cloth (BN63-01798B)

y Warranty Card / Safety Guide / Quick Setup Guide

(M4XL12)

AV Adapter Component Adapter TV-Holder & Screw (1EA) Holder-Wire (4EA)

(BN39-01154H) (BN39-01154C) (BN96-10788D) (BN61-05373A)

Mini Remote Control &

Lithium battery

Samsung Wireless Lan

Adapter

USB adapter

For stand type For wall mount type

(BN59-00788A) (WIS09ABGN2)

Touch Control

y Owner’s Instructions y Warranty Card / Quick Setup Guide

VOL

CH

MUTE

SOURCE

Touch Control Cable Power Adapter Touch Control Battery

Wall Mount Box (Assembly to Wall)

✎

Three of each type of screw are supplied. Only two are required for assembly. The other is a spare.

A B

(2EA)

(3EA)

M5X65mm-Wood

(3EA)

M5X60mm-Machine

[UC9000_NA]BN68-03088A-00L03.indb 4 2010-05-10 오전 10:25:56

5

01 Getting Started

English

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

✎

To control the TV using the LED touch pad, tap the LED touch pad centered underneath the stand. The touch pad will

slide out by itself. The LED touch pad will slide back in if unused for a specified period of time.

3D Emitter The LED on the 3D emitter blinks only when sending a 3D signal.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

Remote control sensor Aim the remote control towards this spot on the TV.

SOURCE



Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER



button on the remote control.

MENU



Displays an on-screen menu, the OSD (on screen display) of your TV’s features.



Adjusts the volume. In the OSD, use the



buttons as you would use the

◄ and ► buttons on the remote control.



Changes the channels. In the OSD, use the



buttons as you would use the

▼ and ▲ buttons on the remote control.



(Power)

Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

✎

For best cable connection to this product, be sure to use cables with a maximum thickness as below:

y Maximum thickness - 0.55 inches (14mm)

Input Cables (Sold Separately)

HDMI HDMI-DVI Component Composite (AV) Coaxial (RF) VGA

SOURCE MENU

VOL CH

Power Indicator

Remote control sensor

Speakers Speakers

Woofer

3D Emitter

[UC9000_NA]BN68-03088A-00L03.indb 5 2010-05-10 오전 10:25:59

6

Getting Started

English

Mini Remote Control

The Mini Remote Control is a simpliﬁed remote control that consists of the power, channel and volume buttons only.

 Description

✎

This is a special remote control for the visually impaired and has Braille points on the Channel and Volume buttons.

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold

or distributed ONLY in California USA ‘Perchloate Material - special handling may apply, See www.dtsc.ca.gov/

hazardouswaste/perchlorate:’

 Inserting the battery

1. Turn the battery cover counterclockwise to unlock it and then

separate the battery cover.

2. Insert a 3V Lithium battery with the + side facing down into the

battery cover.

3. Place the battery cover into the remote control aligning it with the

grooves and then turn the battery cover clockwise to lock the

cover.

✎

If the remote control doesn’t work, check the following:

x

Is the TV power on?

x

Are the plus and minus ends of the batteries reversed?

x

Are the batteries drained?

x

Is there a power outage or is the power cord unplugged?

x

Is there a special fluorescent light or neon sign nearby?

Previous channel

Next channel

Volume decrease

Volume increase

Power On/Off button

IrDA transmitter

✎

Point the IrDA transmitter at the TV

to use the mini remote.

OPEN

CLOSE

[UC9000_NA]BN68-03088A-00L03.indb 6 2010-05-10 오전 10:26:01

7

01 Getting Started

English

Viewing the Touch Control

 Description

Power Turn the TV on and off.

MUTE Mute or unmute the sound.

SOURCE Display the source list (TV, PC, etc.) on the screen.

Volume Press to control the volume.

Channel Press to change channels.

 Inserting the battery

1. Slide and open the battery cover

in the direction of the arrow.

2. Insert the battery with the

Samsung logo facing up.

3. Slide and close the battery

cover in the direction of the

arrow.

VOL

CH

MUTE

SOURCE

VOL

CH

MUTE

SOURCE

Battery cover

Charge Port

TV Power button

Touch screen

Speaker

Earphone jack

Front View Rear View

[UC9000_NA]BN68-03088A-00L03.indb 7 2010-05-10 오전 10:26:03

8

Getting Started

English

 Remote Control Screen Display

1

Initial Screen

2

Drag to the Left direction

3

Tap the Navigation or Menu button.

4

Tap Services.

INTERNET@TV: Link to various internet

services (p. 50).

MEDIA.P: Displays Media Play (p. 39).

3D: Sets the 3D mode. (p. 22).

YAHOO!: Runs the Yahoo widget. (p. 54).

CHLIST: Displays channel lists on the screen

(p. 16).

FAV.CH: Displays Favorite Channel Lists on the

screen (p. 16).

P.SIZE: Selects the picture size (p. 20).

CC: Controls the caption decoder (p.

28).

MTS: Press to choose stereo, mono or

Separate Audio Program (SAP broadcast)

(p. 25).

Press to select additional channels (digital) being broadcasted by the same station. For example, to

select channel “54-3”, press “54”, then press “–” and “3”.

Returns to the previous channel.

Press to directly access channels.

CONTENT: Displays the Content View, which includes Channel List, Internet@TV, Media Play,

AllShare and 3D.

MENU: Brings up the OSD.

INTERNET@TV: Link to various internet services (p. 50).

RETURN



: Returns to the previous menu.

TOOLS



: Quickly select frequently used functions.

INFO : Displays information on the TV screen.

EXIT



: Exits the menu.

Buttons used in the Channel List, Internet@TV, Media Play menu, etc.

Use these buttons in Media Play and Anynet+ modes (p. 39, 46).

(: Controls recording for Samsung recorders that have the Anynet+ feature)

Selects the on-screen menu

items and changes the values

seen on the menu.

Keyboard

Navigation

TV Control Services

CONTENT MENU

INTERNET

@TV

Keyboard

Navigation

TV Control Services

Keyboard

TV Control Services

[UC9000_NA]BN68-03088A-00L03.indb 8 2010-05-10 오전 10:26:04

9

01 Getting Started

English

 Setting Up Your Remote

You can set up your Touch Control to control your TV in three ways:

As a standard, IR (Infra Red) remote

As an IR remote, your LCD Touch Control works the same way as a standard push button remote, except you touch icons and

symbols on the LCD screen to control your TV instead of pushing buttons. Using your Touch Control as an IR remote requires

no more set up than a standard remote and gives you access to most of the remote’s functions and features.

As an extended distance, Wi-Fi remote

As an extended distance, Wi-Fi remote, your Touch Control offers all the functions and features of the IR mode and, because

it uses Wi-Fi radio waves instead of infra red waves to control your TV, it lets you control your TV from a much greater distance

and even from around corners. It also gives you access to the Twin Display function which lets you watch the program or

content that is on your TV screen on the LCD screen of the Touch Control. The long distance, Wi-Fi mode requires a few

additional setup steps; possibly including re-initialization. It also requires you to attach Samsung’s Wireless LAN Adapter

(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV’s USB ports.

As a networked, Wi-Fi remote

As a networked, Wi-Fi remote, your Touch Control gives you all the functions and features of the IR and the extended distance

modes and also gives you access to the Multimedia function which lets you listen to or view music, movie, and picture ﬁles

from your PC on your TV screen. You can also download upgrades to your Touch Control’s software directly from the Internet.

The networked, Wi-Fi mode requires the largest number of setup steps. In addition, to use the networked, Wi-Fi mode,

you need a working local area network and a wireless router. You also need to attach Samsung’s Wireless LAN Adapter

(WIS09ABGN, WIS09ABGN2, or WIS10ABGN) to one of your TV’s USB ports. To use the Multimedia function, you need to

install Samsung’s PC Share Manager on your PC. You can download PC Share Manager from http://www.samsung.com.

 Setting up the Network

You can set up a wireless network for the Touch Control.

How to connect using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN.

2. On the Services screen, touch Settings → Remote Settings.

3. Touch Network.

4. Touch the PBC(WPS).

5. If the Press PBC button on the access point within 120 seconds. message appears,

press the PBC button on the device to connect.

✎

For more information, refer to the wireless network setup manual of the device to be connected.

6. If the device is connected properly to the TV after starting count on message box then message box will be disappeared

automatically.

✎

If the connection fails, please retry after 2 minutes.

Connecting to network

To setup the wireless connection automatically, follow these steps:

1. Follow Steps 1 through 3 in the “How to connect using PBC (WPS)” procedure.

✎

If the intended network cannot be found in the list, select to open the list of

networks again.

2. Select a network and connect to the network using the encryption method (PIN, security

key, ad-hoc, etc.) set for the network.

3. When the network connection is complete, select Test to perform a network test.

✎

For the automatic IP, the AP will automatically define the IP Address, Subnet Mask,

Gateway and DNS server.

✎

For the manual IP, you can select Edit and directly enter the IP Address, Subnet

Mask, Gateway and DNS server.

✎

For Full Touch Control instructions, please read the Touch Control's user manual.

Press the PBC button on the

access point within 120

seconds.

Remaining Time : 112

Stop

Network

Auto Conguration

PBC(WPS)

Select a network

Unsecured

Secured

[UC9000_NA]BN68-03088A-00L03.indb 9 2010-05-10 오전 10:26:05

10

Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Connecting the power cord and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in conﬁguring basic settings. Press the

POWER



button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1

Turn on the TV and

Touch Control.

y Turn on the Touch Control and then tap OK on

your remote.

✎

It may take about one minute to establish a

wireless connection between the TV and Touch

Control using the Samsung Wireless LAN

Adapter.

2

Connect the Samsung

Wireless LAN Adapter

y Connect the Samsung Wireless LAN Adapter to the TV. You can connect the Samsung

Wireless LAN Adapter using the method shown on page 35.

y If the connection fails, reconnect the Samsung Wireless LAN Adapter and then try

again.

3

Selecting a language

Press the ▲ or ▼ button, then press the ENTER



button.

Select the desired OSD (On Screen Display) language.

4

Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER



button.

y Select the Home Use mode. Store Demo Mode is for retail environments.

y To return the unit’s settings from Store Demo to Home Use (standard): Press the

volume button on the TV. When you see the volume OSD, press and hold MENU for 5

sec.

5

Selecting an antenna

Press the ▲ or ▼ button, then press the ENTER



button. Select Air, Cable or Auto.

6

Selecting a channel

Press the ▲ or ▼ button, then press the ENTER



button. Select the channel source

to memorize. When setting the antenna source to Cable, a step appears allowing you to

assign numerical values (channel frequencies) to the channels. For more information, refer to

Channel → Auto Program (p. 16).

✎

Press the ENTER



button at any time to interrupt the memorization process.

7

Setting the Clock

Mode

Set the Clock Mode automatically or manually.

y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.

y Manual: Allows you to manually set the current date and time (p. 26).

8

View the HD

Connection Guide

The connection method for the best HD screen quality is displayed.

9

Enjoy your TV.

Press the ENTER



button.

If You Want to Reset This Feature...



MENU → Setup → Plug & Play → ENTER



ANT OUT

VHF/UHF Antenna

Antenna Cable (Not Supplied)

or

Cable

[UC9000_NA]BN68-03088A-00L03.indb 10 2010-05-10 오전 10:26:05

11

English

02 Connections

Connections

Connecting to an AV Device

Using an HDMI or HDMI/DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

✎

HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN

x

For better picture and audio quality, connect to a digital device using an HDMI cable.

x

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

x

The picture may not display normally (if at all) or the audio may not work if an external device that uses an older

version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external

device about the HDMI version and, if out of date, request an upgrade.

x

Be sure to use an HDMI cable with a thickness of 14 mm or less.

x

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may

occur.

x

A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the

ethernet function via HDMI.

x

This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the

ARC function is supported by the HDMI IN 2(ARC) port only.

– If 3D Auto View is set to On, some functions such as Internet@TV may be disabled. In this case, set

3D Auto View or 3D Mode to Off.

x

The ARC function allows digital audio to output via the HDMI IN 2(ARC) port. It can be enabled only when the

TV is connected with an audio receiver that supports the ARC function.

WR

DVI OUT

R-AUDIO-L

AUDIO OUT

HDMI OUT

Device Device

WhiteRed

Audio Cable

(Not Supplied)

HDMI to DVI Cable (Not Supplied)

HDMI Cable

(Not Supplied)

[UC9000_NA]BN68-03088A-00L03.indb 11 2010-05-10 오전 10:26:07

12

English

Connections

Using a Component (up to 1080p) or Audio/Video (480i only) Cable

Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR

✎

For better picture quality, the Component connection is recommended over the A/V connection.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link.

EX-LINK: Connector for service only.

PR PB Y

COMPONENT OUT

AUDIO OUT

R-AUDIO-L

W

R

G

B

AUDIO OUT

R-AUDIO-L

VIDEO OUT

R

Y

W R

R

B

G

WR

R

G

B

W R

W Y

Y

R

Device

Red

RedBlue

White

WhiteGreen

Yellow

Audio Cable

(Not Supplied)

Video Cable (Not Supplied)

Video Cable

(Not Supplied)

AV Adapter (Supplied)

Component Adapter

(Supplied)

Audio Cable

(Not Supplied)

[UC9000_NA]BN68-03088A-00L03.indb 12 2010-05-10 오전 10:26:08

13

English

02 Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analog) Cable Connection

Available devices: Digital Audio System, Ampliﬁer, DVD home theater

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is

a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is

connected to the TV via HDMI, only 2 CH audio will be heard from the home theater receiver. If you want to

hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite

receiver directly to an amplifier or home theater.

✎

AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theater.

x

When connecting, use the appropriate connector.

x

When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust the

volume level with the amplifier’s volume control.

OPTICAL

WR

R-AUDIO-L

AUDIO IN

Optical Cable (Not Supplied)

Audio Cable (Not Supplied)

Digital Audio System

Ampliﬁer /

DVD home theater

Red White

[UC9000_NA]BN68-03088A-00L03.indb 13 2010-05-10 오전 10:26:09

14

English

Connections

Connecting to a PC

Using an HDMI/DVI cable or a D-sub cable

PC OUT

DVI OUT

AUDIO OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution

Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM

640 x 350

720 x 400

31.469

70.086

70.087

25.175

28.322

+/-

-/+

MAC

640 x 480

832 x 624

1152 x 870

35.000

49.726

68.681

66.667

74.551

75.062

30.240

57.284

100.000

-/-

VESA CVT

720 x 576

1152 x 864

1280 x 720

1280 x 960

35.910

53.783

56.456

75.231

59.950

59.959

74.777

74.857

32.750

81.750

95.750

130.000

-/+

VESA DMT

640 x 480

800 x 600

1024 x 768

1152 x 864

1280 x 1024

1280 x 720

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1680 x 1050

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

45.000

49.702

62.795

60.000

47.712

55.935

70.635

65.290

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

60.000

59.810

74.934

60.000

60.015

59.887

74.984

59.954

25.175

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

74.250

83.500

106.500

108.000

85.500

106.500

136.750

146.250

-/-

+/+

-/-

+/+

-/+

+/+

-/+

VESA GTF

1280 x 720

1280 x 1024

52.500

74.620

70.000

89.040

128.943

-/+

-/-

VESA DMT / DTV CEA

1920 x 1080p 67.500 60.000 148.500 +/+

✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set may operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG(Sync On Green) is not supported.

HDMI to DVI Cable (Not Supplied)

D-Sub Cable (Not Supplied)

Audio Cable (Not Supplied)

[UC9000_NA]BN68-03088A-00L03.indb 14 2010-05-10 오전 10:26:13

15

English

02 Connections

Changing the Input Source

Source List

Use to select TV or an external input sources such as a DVD

/ Blu-ray player / cable box / STB satellite receiver.



MENU → Input → Source List → ENTER



■ TV / PC / AV / Component / HDMI1/DVI / HDMI2 /

HDMI3 / HDMI4 / USB

✎

You can only choose external devices that

are connected to the TV. In the Source List,

connected inputs will be highlighted.

✎

In the Source List, PC is always activated.

Edit Name



MENU → Input → Edit Name → ENTER



■ VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC / DVI

Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name

the device connected to the input jacks to make your

input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @ 60Hz is

connected to the HDMI IN 1(DVI) port, you should set

the TV to DVI PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the HDMI IN

1(DVI) port, you should set the TV to DVI PC or DVI

Devices mode under Edit Name.

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

1 MENU button: Displays the main on-screen menu.

2 ENTER



/ Direction button: Move the cursor and

select an item. Conﬁrm the setting.

3 EXIT button: Exits the on-screen menu.

4 RETURN button: Returns to the previous menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1

MENU The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2

▲ / ▼ Select an icon with the ▲ or ▼

button.

3

ENTER



Press ENTER



to access the

sub-menu.

4

▲ / ▼

Select the desired submenu with

the ▲ or ▼ button.

5

◄ / ►

Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6

ENTER



Press ENTER



to conﬁrm the

selection.

7

EXIT



Press EXIT.

Keyboard

Navigation

TV Control Services

CONTENT MENU

INTERNET

@TV

Keyboard

TV Control Services

1

4

3

2

[UC9000_NA]BN68-03088A-00L03.indb 15 2010-05-10 오전 10:26:14

16

English

Basic Features

Channel Menu

 Seeing Channels

Channel List

Add, delete or set Favorite channels and use

the program guide for digital broadcasts.



MENU → Channel → Channel List →

ENTER



Select a channel in the All Channels, Added

Channels, Favorite or Programmed screen by

pressing the ▲ / ▼ and ENTER



buttons.

Then you can watch the selected channel.

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■



Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved

programs.

✎

Using the color buttons with the Channel List

x

Red (Antenna): Switches to Air or Cable.

x

B

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Selects multiple channel lists.

Select desired channels and press the Yellow button

to set all the selected channels at the same time. The



mark appears to the left of the selected channels.

x



(Page): Move to next or previous page.

x



(Tools): Displays the Channel List option menu.

(The options menus may differ depending on the

situation.)

Channel Status Display Icons

Icons Operations



A channel selected.



A channel set as a Favorite.



A reserved Program.

 Using Favorite Channels



MENU → Channel → Channel List → ENTER



Add to Favorite / Delete from Favorite



Set channels you watch frequently as Favorites.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel using the Add to Favorite or

Delete from Favorite menu respectively.

To show all Favorite channels, click on

the button shown on the right.

 Memorizing Channels



MENU → Channel → ENTER



Antenna (Air / Cable)



Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).

Auto Program

■ Air: Air antenna signal.

■ Cable: Cable antenna signal.

■ Auto: Air and Cable antenna.

CHLIST

FAV.CH

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Air Antenna

B

Zoom Select



Page



Tools

Added Channels

6 Air

6-1 * TV #6

7 Air

8 Air

9 Air

9-1 * TV #9

10 Air

10-1 * TV #10

11-1 * TV #11

Air Antenna

B

Zoom Select



Page



Tools

Added Channels

Delete

Add to Favorite

Timer Viewing

Channel Name Edit

Select All

[UC9000_NA]BN68-03088A-00L03.indb 16 2010-05-10 오전 10:26:18

17

English

03 Basic Features

✎

NOTE

x

When selecting the Cable TV system: STD, HRC

and IRC identify various types of cable TV systems.

Contact your local cable company to identify the

type of cable system that exists in your particular

area. At this point, the signal source has been

selected.

x

After all the available channels are stored, it starts

to remove scrambled channels. The Auto Program

menu then reappears.

 Editing Channels



MENU → Channel → Channel List → ENTER



Channel Name Edit

1. Select a channel and press the TOOLS button.

2. Edit the channel name using the Channel Name Edit

menu.

■ Channel Name Edit (analog channels only): Assign your

own channel name.

 Other Features



MENU → Channel → ENTER



Clear Scrambled Channel

This function is used to ﬁlter out scrambled channels after

Auto Program is completed. This process may take up to

20~30 minutes.

How to Stop Searching Scrambled Channels

1. Press the ENTER



button to select Stop.

2. Press the ◄ button to select Yes.

3. Press the ENTER



button.

✎

This function is only available in Cable mode.

Channel List

Channel List Option Menu

Set each channel using the Channel List menu options (Add

/ Delete, Timer Viewing, Select All / Deselect All). Option

menu items may differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■ Add / Delete: Delete or add a channel to display the

channels you want.

✎

NOTE

x

All deleted channels will be shown on the All

Channels menu.

x

A gray-colored channel indicates the channel

has been deleted.

x

The Add menu only appears for deleted

channels.

x

Delete a channel from the Added Channels or

Favorite menu in the same manner.

■ Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time ﬁrst to use this function.

1. Press the ◄ / ► / ▲ / ▼ buttons to select the

desired channel in Channel List.

2. Press the TOOLS button, then select Timer

Viewing.

3. Scroll up or down to adjust the settings in the box,

or use the numeric buttons on your remote to enter

the date and time.

✎

If you selected Once, Every Week or EveryDay

in Repeat you can enter the date you want.

4. Select OK, then press the ENTER



button when

done.

✎

NOTE

x

Only memorized channels can be reserved.

x

Reserved programs will be displayed in the

Programmed menu.

x

When a digital channel is selected, press the ►

button to view the digital program.

■ Select All: Select all the channels in the channel list.

■ Deselect All: Deselect all the selected channels.

✎

You can only select Deselect All when one or

more channels are selected.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved

to watch. Programmed timer viewing is displayed here.

Highlight a program and press the TOOLS button to display

Options.

■ Change Info: Change a show you have reserved to

watch. Begin with step 3 of “Timer Viewing” above.

■ Cancel Schedules: Cancel a show you have reserved

to watch.

✎

This deletes the highlighted or selected

program(s).

[UC9000_NA]BN68-03088A-00L03.indb 17 2010-05-10 오전 10:26:19

18

English

Basic Features

■ Information: Display a show you have reserved

to watch. (You can also change the reservation

Information.)

✎

Alternatively, you can view Information by

highlighting a program and pressing the

ENTER



button.

■ Select All / Deselect All: Select or deselect all reserved

programs.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ﬁne tune the

channel, as this is done automatically during the search and

store operation. If the signal is weak or distorted, ﬁne tune

the channel manually. Scroll to the left or right until the image

is clear.

✎

Settings are applied to the channel you're currently

watching.

✎

Fine tuned channels that have been saved are marked

with an asterisk “*” on the right-hand side of the

channel number in the channel banner.

✎

To reset the fine-tuning, select Reset.

Picture Menu

 Changing the Preset Picture Mode



MENU → Picture → Mode → ENTER



Mode



Select your preferred picture type.

■ Dynamic: Suitable for a bright room.

■ Standard: Suitable for a normal environment.

■ Natural: Suitable for reducing eye strain.

✎

Natural is not available in PC mode.

■ Movie: Suitable for watching movies in a dark room.

 Adjusting Picture Settings



MENU → Picture → ENTER



Backlight / Contrast / Brightness /

Sharpness / Color / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

x

When you make changes to Backlight, Contrast,

Brightness, Sharpness, Color or Tint (G/R) the

OSD will be adjusted accordingly.

x

In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

 Economical Solutions

The Eco Function can be used to enhance your power

savings.

Eco Solution



MENU → Picture → Eco Solution → ENTER



■ Energy Saving (Off / Low / Medium / High / Picture

Off / Auto): This adjusts the brightness of the TV in

order to reduce power consumption. If you select

Picture Off, the screen is turned off, but the sound

remains on. Press any button except the volume button

to turn on the screen.

■ Eco Sensor (Off / On): To enhance your power savings;

the picture settings will automatically adapt to the light

in the room.

✎

If you adjust the Backlight, the Eco Sensor will

be set to Off.

Min Backlight: When Eco sensor is On, the minimum

screen brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness may

change (become slightly darker in most cases)

depending on the surrounding light intensity.

■ No Signal Power Off (Off / 15 min. / 30 min. / 60

min.): To avoid unnecessary energy consumption,

set how long you want the TV to remain on if it's not

receiving a signal.

✎

Disabled when the PC is in power saving mode.

[UC9000_NA]BN68-03088A-00L03.indb 18 2010-05-10 오전 10:26:19

19

English

03 Basic Features

 Changing the Picture Options

Advanced Settings



MENU → Picture → Advanced Settings →

ENTER



(Advanced Settings are available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a

more precise picture.

✎

In PC mode, you can only make changes to Dynamic

Contrast, Gamma and White Balance, LED Motion

Plus.

■ Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■ Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

■ Shadow Detail (-2~+2): Increase the brightness of dark

images.

■ Gamma: Adjust the primary color intensity.

■ Expert Pattern (Off / Pattern1 / Pattern2): By

running the Expert Pattern function, the picture can

be calibrated. If the OSD menu disappears or a menu

other than the Picture menu is opened, the calibration is

saved and the Expert Pattern window disappears.

Off: Turns the Expert Pattern function off.

Pattern1: This is a test screen designed to demonstrate

the affects of display settings on shades.

Pattern2: This is a test screen designed to demonstrate

the affects of display settings on colors.

✎

After selecting Pattern1 or Pattern2, you can

adjust any of the advanced settings to the desired

effect.

✎

While the Expert Pattern is running, sound is not

output.

✎

Only enabled in DTV, Component and HDMI

modes.

■ RGB Only Mode (Off / Red / Green / Blue): Displays

the Red, Green and Blue color for making ﬁne

adjustments to the hue and saturation.

■ Color Space (Auto / Native / Custom): Adjust the

range of colors available to create the image. To adjust

Color, Red, Green, Blue and Reset, set Color Space

to Custom.

■ White Balance: Adjust the color temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each color's

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each color's (red,

green, blue) brightness.

Reset: Resets the White Balance to it's default

settings.

■ 10p White Balance (Off / On): Controls the white

balance in 10 point intervals by adjusting the red, green,

and blue brightness.

✎

Available when the picture mode is set to Movie

and when the external input is set to HDMI or

Component.

✎

Some external devices may not support this

function.

Interval: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default

settings.

■ Flesh Tone: Emphasize pink “Flesh Tone.”

■ Edge Enhancement (Off / On): Emphasize object

boundaries.

■ xvYCC (Off / On): Setting the xvYCC mode on

increases detail and color space when watching movies

from an external device (e.g. BD/DVD player) connected

to the HDMI or Component IN jacks.

✎

Available when the picture mode is set to Movie

and when the external input is set to HDMI or

Component.

✎

Some external devices may not support this

function.

■ LED Motion Plus (Off / On): Removes drag from fast

scenes with a lot of movement to provide a clear picture.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : -2

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Color Space : Native

▼



Move



Enter



Return

[UC9000_NA]BN68-03088A-00L03.indb 19 2010-05-10 오전 10:26:20

20

English

Basic Features

Picture Options



MENU → Picture → Picture Options → ENTER



✎

In PC mode, you can only make changes to the Color

Tone, Size and Auto Protection Time.

■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the picture

mode is Dynamic.

✎

Settings can be adjusted and stored for each external

device connected to an input on the TV.

■ Size: Your cable box/satellite receiver may

have its own set of screen sizes as well.

However, we highly recommend you use

16:9 mode most of the time.

16:9 : Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magniﬁcation.

Zoom2: Use for a stronger magniﬁcation.

Wide Fit: Enlarges the aspect ratio of the

picture to ﬁt the entire screen.

✎

Available with HD 1080i / 720p signals in 16:9

mode.

4:3 : Sets the picture to basic (4:3) mode.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and center

of the screen may cause image retention(screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE

x

After selecting Zoom1, Zoom2 or Wide Fit:

1. Press the ► button to select Position.

2. Press the ENTER



button.

3. Press the ▲ or ▼ button to move the picture up

or down.

4. Press the ENTER



button.

5. Press the ► button to select Reset.

6. Press the ENTER



button to reset the picture

to its default position.

x

After selecting Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to

center the picture:

1. Press the ◄ or ► button to select Position.

2. Press the ENTER



button.

3. Press the ▲, ▼, ◄ or ► button to move the

picture.

4. Press the ENTER



button.

5. Press the ◄ or ► button to select Reset.

6. Press the ENTER



button.

x

HD (High Definition): 16:9 - 1080i/1080p (1920x1080),

720p (1280x720)

x

Settings can be adjusted and stored for each

external device you have connected to an input on

the TV.

Input Source Picture Size

ATV, AV,

Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV(1080i),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, 4:3, Wide Fit,

Screen Fit

PC 16:9, 4:3

P.SIZE

Picture Options

Color Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

Auto Motion Plus : Standard

▼



Move



Enter



Return

[UC9000_NA]BN68-03088A-00L03.indb 20 2010-05-10 오전 10:26:21

La page est en cours de chargement...

Samsung LED 9000 Le manuel du propriétaire

Ce manuel convient également à

Samsung LED 9000 Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents