Maytag MHW8630HW Le manuel du propriétaire

If you have any problems or questions, visit us at www.maytag.com

Pour tout problème ou toute question, consulter le www.maytag.ca

Use & Care Guide

Guide d’utilisation et d’entretien

Para obtener acceso

al Manual de uso y cuidado

en español, o para obtener

información adicional acerca

de su producto, visite:

www.maytag.com

FRONT-LOADING AUTOMATIC WASHER

LAVEUSE AUTOMATIQUE À CHARGEMENT FRONTAL

W11156983B

W11156984A – SP

Designed to use only HE

High Efﬁciency detergents.

Conçue uniquement pour

une utilisation avec des

détergents HE Haute

efficacité.

Protocole NSF P351

Performance de réduction des allergènes pour les laveuses

de format familial à usage résidentiel ou commercial

Seuls les modèles comportant le programme de lavage

anti-allergie répondent aux critères de la certication NSF.

2

TABLE OF CONTENTS / TABLE DES MATIÈRES

WASHER SAFETY ...................................................................................................... 3

ACCESSORIES ...........................................................................................................4

CONTROL PANEL AND FEATURES .......................................................................5

CYCLE GUIDE .............................................................................................................. 8

CHOOSING THE RIGHT DETERGENT .................................................................10

USING THE OPTIMAL DISPENSE DRAWER (on some models) .................10

USING YOUR WASHER ..........................................................................................11

WASHER MAINTENANCE ......................................................................................16

TROUBLESHOOTING ..............................................................................................20

WARRANTY ...............................................................................................................29

ASSISTANCE OR SERVICE ............................................................ BACK COVER

SÉCURITÉ DE LA LAVEUSE ..................................................................................30

ACCESSOIRES .........................................................................................................31

TABLEAU DE COMMANDE ET CARACTÉRISTIQUES ....................................32

GUIDE DE PROGRAMMES ....................................................................................36

CHOIX DU DÉTERGENT APPROPRIÉ ................................................................40

UTILISATION DU TIROIR DISTRIBUTEUR DE DOSAGE OPTIMAL

(sur certains modèles) ............................................................................................40

UTILISATION DE LA LAVEUSE .............................................................................41

ENTRETIEN DE LA LAVEUSE ................................................................................46

DÉPANNAGE .............................................................................................................51

GARANTIE ..................................................................................................................63

ASSISTANCE OU DÉPANNAGE .................................COUVERTURE ARRIÈRE

3

WASHER SAFETY

4

Customize your new washer and dryer with the following

genuine Whirlpool accessories. For more information on

options and ordering, call 1-800-344-1274 or visit us at:

www.maytag.com/accessories. In Canada, call

1-800-688-2002 or visit us at www.maytag.ca.

INSTALLATION & MAINTENANCE

ACCESSORIES

FACTORY CERTIFIED PARTS – these three

words represent quality parts and accessories

designed specically for your appliance.

Time tested engineering that meets

our strict quality specications.

FACTORY CERTIFIED PARTS

Accessories designed for your appliance:

ACCESSORIES

15" Pedestal

Color-matched pedestals raise

the washer and dryer to a more

comfortable working height.

The large drawer provides

convenient storage.

Stack Kit

If space is at a premium,

the stack kit allows the dryer

to be installed on top of the

washer.

5

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.

NOTES:

■ The control panel features a sensitive surface that responds to a light touch of your nger. To ensure your selections are registered,

touch the control panel with your ngertip, not your ngernail. When selecting a setting or option, simply touch its name.

■ At cycle completion, your setting and option choices will be remembered for your next use of that cycle. However, if power is lost

to the washer, the settings and options will go back to the factory defaults.

3

6

A

B

I

D

F

E

2

1

5

4

A

C

B

D

F

E

A

C

D

H

G

B

3

6

2

1

5

4

6

3

6

2 1

5

4

6

I

6

POWER

Touch to turn the washer on and off. Touch to stop/cancel

a cycle at any time.

NOTE: Turning the Wash Cycle knob will also turn the

washer on.

WASH CYCLE KNOB

Turn the knob to select a cycle for your laundry load. Press

the Wash Cycle knob to enable the Extra Power option.

NOTE: The Clean Washer with affresh

®

LED will ash when

the washer has run 30 wash cycles as a reminder to run the

Clean Washer with affresh

®

cycle.

See “Cycle Guide” for detailed descriptions of cycles.

NOTE: For best results when using the Overnight Wash &

Dry cycle, use for loads weighing 2 lbs or less, such as a

soccer uniform or a running tank and shorts. Allow the cycle

to run the full duration of 12 hours.

EXTRA POWER

Extra Power option can be used for increased cleaning

power. Press the Wash Cycle Knob to activate the Extra

Power option, which runs a cold pre-wash cycle before

the main cycle. When Extra Power is activated, the Cycle

Control Knob will illuminate and the estimated time

remaining on the display will increase. On single load

dispenser models, add an extra dose of detergent to the

Bleach/Detergent for Extra Power compartment when using

Extra Power, for best results.

START

Touch and hold for 3 seconds until the light above START

comes on to start a cycle or touch once while a cycle is in

process to pause it. If you want to add a garment, you can

touch START when the “Add Garment” LED is on.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and

the Estimated Time Remaining will be displayed. Factors

such as load size, wash temperature, and water pressure

may affect the time shown in the display. Tightly packing,

unbalanced loads, or excessive suds may cause the washer

to lengthen the cycle time as well.

Touch the desired setting on the display to adjust. See

“Cycle Guide” for available settings on each cycle. Not all

settings are available with all cycles.

Temp

The recommended wash temperature is preset for each

cycle. You may also select a wash temperature based

on the type of fabric and soils being washed. For best

results, use the warmest wash water safe for your

fabric, following the garment label instructions. All wash

temperatures feature a cold rinse.

Spin

This washer automatically selects the spin speed

based on the cycle selected. Some preset speeds

can be changed.

■ Faster spin speeds mean shorter dry times but may

increase wrinkling in your load.

■ Slower spin speeds reduce wrinkling but will leave

your load more damp.

Soil

Soil Level (wash time) is preset for each wash cycle.

When you change the soil setting, the cycle time will

increase or decrease in the Estimated Cycle Time

display.

1

2

3

4

For most loads, use the soil level that is preset with the

cycle you have chosen. For heavily soiled and sturdy

fabrics, use the Soil Level setting to select a higher soil

level. For lightly soiled and delicate fabrics, use the Soil

Level setting to select a lower soil level. Lower soil level

settings will help reduce tangling and wrinkling.

CYCLE STATUS LIGHTS

NOTE: Not all Cycle Status Lights are available on all

models.

The Cycle Status Lights show the progress of a cycle.

At each stage of the process, you may notice sounds

or pauses that are different from traditional washers.

Sensing

When START is touched and held, the washer will rst

perform a self-test on the door lock mechanism and the

sensing light will come on. You will hear a click, the drum will

make a partial turn, and the door will click again as it unlocks

briey. The door will click one more time when it locks again.

Once the door has locked the second time, the washer will

begin spinning to sense the load size. This sensing process

will continue throughout the cycle. You may also hear water

owing through the dispenser, adding detergent to the load.

After the load size is sensed, the estimated time based on

load size will be displayed. The actual cycle time may be

lengthened; however, the display will continue to show the

estimated time.

The sensing light will blink once a second at various times

during the cycle, such as when the washer is reducing

extra suds.

Washing

During the wash cycle, this will display to let you know the

cycle is in progress.

Add Garment

When “Add Garment” is lit, you may pause the washer, open

the door, and add items. Touch and hold START to start the

washer again.

Detergent Low

When detergent in the dispenser is running low, the display

will show the detergent level (Low).

OPTIONS

Touch to activate additional wash options or additional

features on the washer. Not all options are available on

all models.

Delay Start

Touch this option to delay the start of the wash cycle

by up to 12 hours.

6

A

5

7

Fresh Hold

®

/Fresh Spin

TM

The Fresh Hold

®

/Fresh Spin

TM

option will periodically

tumble the load after the end of the cycle for up to 24

hours while the integrated fan circulates air through the

washer to reduce humidity. Fresh Spin™ also periodically

tumbles the load after the end of the cycle but does not

use an integrated fan. To turn on the Fresh Hold

®

/Fresh

Spin™ option, touch FRESH HOLD. If, however, the

Fresh Hold

®

/Fresh Spin™ option is turned on, it will stay

on for all future cycles until turned back off – the washer

remembers the last on/off status set. To turn off the Fresh

Hold

®

/Fresh Spin™ option, touch FRESH HOLD.

To turn off the Fresh Hold

®

/Fresh Spin™ option when it is

running, touch POWER.

NOTE: The door will lock while the Fresh Hold

®

/Fresh

Spin™ option is active. To cancel the option and unlock

the door, touch POWER.

Steam

The Steam option adds additional soak and wash time

to many cycles to help remove tough stains as well as

a steam boost for added cleaning power. An integrated

heater helps to maintain optimal wash temperatures.

Extra Rinse

Activate this option to add an extra rinse to most cycles.

Cycle Signal

Touch and hold CYCLE SIGNAL for about 3 seconds the

display will count down you will see “3,” then “2,” then

“1.” The display will start displaying the sound levels you

will see “1,” then “2,” then “3,” then “OFF.” When the

CYCLE SIGNAL is released the last value shown will be

the current selection.

B

C

D

E

G

H

I

Control Lock

Touch and hold for 3 seconds to lock the controls to avoid

unwanted changes or operation. Touch and hold 3 seconds

again to unlock. For each second CONTROL LOCK is held

down, the display will count down 1 second; you will see

“3,” then “2,” then “1.” You may still touch START to pause

the cycle or touch POWER to turn off the washer.

WiFi Connect

Download the Maytag™ app and follow the instructions to

connect your washer/dryer to your home Wi-Fi network. You

may also visit www.maytag.com/connect. In Canada, visit

www.maytag.ca.

Remote Enable

Touch this button to be able to use the Maytag

®

app to

control the washer. Press this button each time after Power

On and when the door is opened and closed.

Extra Power

The Extra Power option boosts stain ghting performance

on any wash cycle with a dual temperature wash, combining

cold and hot temperature during different phases of the

wash time. To use this function press the knob to activate

the Extra Power option. For single dose dispensers and an

additional 1/2 the manufacturer’s recommended amount

into the dispenser marked for Extra Power. For the Optimal

Dispenser it will automatically dispense the detergent at the

optimal time.

F

Automatically dilutes and dispenses liquid chlorine

bleach at the optimum time during the rst rinse after

the wash cycle. This compartment cannot dilute

powdered bleach. On single load dispenser models,

use this compartment to add an extra dose of detergent

when using the Extra Power option.

Liquid High Efﬁciency “HE” detergent compartment

This compartment holds liquid or powdered HE

detergent for your main wash cycle.

Optimal Dispense Liquid High Efﬁciency “HE”

detergent compartment

This compartment holds up to 14.3 oz (424 ml) of liquid

HE detergent allowing you to avoid having to rell

detergent for each load. Also, this will use just the right

amount of detergent required for a particular load/cycle.

Liquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric

softener at the optimum time in the cycle.

■ Use only liquid fabric softener in this dispenser.

Liquid chlorine bleach compartment

D

B

C

A

7

DISPENSERS

C

B

A

C

B

Optimal Dispense Drawer (on some models)

The Optimal Dispense drawer gives you the convenience of

automatically adding HE detergent, liquid chlorine bleach, and

liquid fabric softener to the wash load at the proper time. See

“Using the Optimal Dispense Drawer” for information on using

the dispenser drawer.

Single Load Dispenser Drawer (on some

models)

The dispenser drawer gives you the convenience

of adding HE detergent, liquid chlorine bleach,

and liquid fabric softener to the wash load at the

proper time. See “Using the Dispenser Drawer”

for information on using the dispenser drawer.

D

8

CYCLE GUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings

that best t the load being washed. Not all settings are available with each cycle and some options cannot be used together.

Not all cycles and options are available on all models.

*All temperature selections feature a Cold rinse.

**The Steam option is only available when a Warm, Very Warm, or Hot water temperature is selected.

***Spin speed varies by model.

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle.

Small load: Fill the washer drum with 3–4 items, not more

than ¼ full.

Medium load: Fill the washer drum up to about ½ full.

Large load: Fill the washer drum up to about ¾ full.

Continued on next page

Items to wash

using default

cycle settings:

Cycle:

Wash

Temperature

*

Spin

Speed***

Soil

Level:

Options/

Modiﬁers:

Cycle Details:

Normally soiled

cottons, linens,

sheets, and

mixed garment

loads

Normal Cold

Cool

Warm

Very Warm

Hot

Off

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

This cycle combines

medium-speed tumbling

and an extra-high-

speed spin. This cycle is

designed to provide the

most energy efﬁciency.

Sturdy colorfast

fabrics and

heavily soiled

garments

Heavy

Duty

Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

Fast-speed tumbling and

an extra-fast-speed ﬁnal

spin help provide optimal

cleaning and reduce

drying times.

Heavily soiled

white fabrics

and garments

Whites Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

Uses a longer wash

time with fast-speed

tumbling, extra rinsing,

and an extra-fast-speed

spin to provide optimal

cleaning and rinsing

when bleach is used.

Sturdy towels

and wash cloths

Towels Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

Provides fast-speed

tumbling, longer wash

time, normal rinsing,

and an xtrafast- speed

spin to shorten drying

time.

Large items

such as sleeping

bags, small

comforters,

jackets

Bulky

Items

Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

Use this cycle to wash

large items such as

jackets and small

comforters. The washer

will ll with enough

water to wet down the

load before the wash

portion of the cycle

begins.

Do not tightly pack

basket.

Small loads of

2–4 lightly soiled

garments

Quick

Wash

Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

For small loads (2–4

items) needed quickly.

This cycle combines

fast-speed tumbling, a

shortened wash time,

and an extra-fast-

speed spin for reduced

drying times.

Extra-large load: Fill the washer drum, but make

sure clothes can tumble freely. For best results, avoid

packing tightly.

9

Items to wash

using default

cycle settings:

Cycle:

Wash

Temperature

*

Spin

Speed***

Soil

Level:

Options/

Modiﬁers:

Cycle Details:

Sheer fabrics,

lingerie,

sweaters, and

lightly soiled

shirts, blouses,

trousers, pants,

and skirts

Delicates Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

This cycle combines

slow-speed tumbling

and slow-speed spin

for gentle fabric care

and reduced wrinkling.

Lightly soiled

shirts, blouses,

trousers, pants,

and dresses

Wrinkle

Control

Cold

Cool

Warm

Very Warm

Hot

Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

This cycle combines

low-speed tumbling and

medium-speed spin for

gentle fabric care and

reduced wrinkling.

Clothing,

bedding and

towels requiring

sanitization

Sanitize Hot Off

Slow

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

This cycle eliminates

99.99% of the most

common bacteria

found in clothes,

sheets, and towels.

The extra hot wash

temperature ensures

sanitization. Check

recommended wash

temperature of your

items. Bacteria tested

were K. pneumonia,

P. aureginosa, and S.

aureus.

Bright or darkly

colored cottons,

linens, casual

and mixed loads

Colors Cold Off

Medium

Med Fast

Fast

Light

Medium

Med Heavy

Heavy

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

Cold water with an

additional wash action

gently lifts stains while

caring for fabrics.

Settings may be

adjusted as desired,

but must use only cold

water settings.

2–4 lightly

soiled synthetic

garments,

athletic

uniforms, or

workout wear

Overnight

Wash &

Dry

Cold

Cool

Warm

Very Warm

Hot

Fast Light

Medium

Med Heavy

Heavy

Steam**

Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Extra power

This short wash cycle

has an extra-high-

speed spin followed by

intermittent tumbling

and fan activation to

circulate air through the

clothes.

Wet load of

clothes

Drain

& Spin

N/A Off

Slow

Medium

Med Fast

Fast

N/A Extra Rinse

Fresh Hold

®

/Fresh

Spin™

Use Drain & Spin to

remove excess water

from the load. Spin

speed can be set to a

lower setting.

*All temperature selections feature a Cold rinse.

**The Steam option is only available when a Warm, Very Warm, or Hot water temperature is selected.

***Spin speed varies by model.

Continued on next page

10

*All temperature selections feature a Cold rinse.

**The Steam option is only available when a Warm, Very Warm, or Hot water temperature is selected.

***Spin speed varies by model.

No clothes in

washer

Clean

Washer

with

affresh

®

N/A N/A N/A N/A Use this cycle every 30

washes to keep the inside

of your washer fresh and

clean. This cycle uses a

higher water level. Use with

affresh

®

washer cleaner

tablet or liquid chlorine

bleach to thoroughly clean

the inside of your washer.

This cycle should not be

interrupted. See “Washer

Care.”

IMPORTANT: Do not place

garments or other items

in the washer during the

Clean Washer with affresh

®

cycle. Use this cycle with

an empty wash tub. See

“Washer Care” in “Washer

Maintenance.”

Items to wash

using default

cycle settings:

Cycle:

Wash

Temperature

*

Spin

Speed***

Soil

Level:

Options/

Modiﬁers:

Cycle Details:

CHOOSING THE RIGHT DETERGENT

Use only High Efciency detergents. The package will be

marked “HE” or “High Efciency.” Low-water washing creates

excessive sudsing with a non-HE detergent. Using non-HE

detergent will likely result in longer cycle times and reduced

rinsing performance. It may also result in component failure and,

over time, buildup of mold or mildew. HE detergents should be

low-sudsing and quick-dispersing to produce the right amount

of suds for the best performance. They should hold soil in

suspension so it is not redeposited onto clean clothes. Not all

detergents labeled as High Efciency are identical in formulation

and their ability to reduce suds. For example, natural, organic,

or homemade HE detergents may generate a high level of suds.

If you use one of these and see an “Sd” or “Sud” error code

appear in the display, consider using a different HE detergent.

Always follow the detergent manufacturer’s instructions to

determine the amount of detergent to use. Do not go over the

Max line on the dispenser. See “Using the Dispenser Drawer”

or “Using the Optimal Dispense Drawer” for more information.

Use only High Efﬁciency

(HE) detergent.

About Detergent Concentration

Today’s liquid HE detergents are concentrated. Most brands of

concentrated HE detergent will show the level of concentration

on the bottle. If so, simply set the concentration level in the

Optimal Dispense menu to match the level shown on the bottle.

However, if the detergent bottle does not give the concentration,

it can be easily calculated. Just divide the package size in uid

ounces by the number of loads. Then refer to the chart below

to nd the concentration.

If you do not get your desired cleaning results, try using a lower

concentration number. If you have excess suds, try using a

higher concentration number.

Concentration Number of ounces ÷ number of loads

2X 1.5–2.49

3X 0.9–1.49

4X 0.7–0.89

5X 0.5–0.69

6X 0.3–0.49

NOTES:

■ A small amount of water may remain in the dispensers from

the previous wash cycle. This is normal.

■ See “About Detergent Concentration” for information on

detergent concentration.

■ To ensure you have enough detergent in the dispenser,

the display will show the detergent level (Low and open lid).

■ To add single-dose and Oxi-type boosters, see the “Using

Your Washer” section.

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4–6 in the

“Using Your Washer” section.

3. Slowly close the dispenser drawer. Make sure it is

completely closed.

USING THE OPTIMAL DISPENSE DRAWER (on some models)

11

Single-dose laundry packets, Oxi-type boosters, color-safe

bleach, or fabric softener crystals can be added to the drum

prior to adding laundry.

NOTE: Always follow manufacturer’s instructions.

USING YOUR WASHER

Sort items by recommended cycle, water temperature,

and colorfastness. Separate heavily soiled items from lightly

soiled. Separate delicate items from sturdy fabrics. Treat

stains promptly and check for colorfastness by testing stain

remover products on an inside seam.

IMPORTANT:

■ Empty pockets. Loose change, buttons, or any small

object can plug pumps and may require a service call.

■ Close zippers, fasten hooks, tie strings and sashes,

and remove non-washable trim and ornaments.

■ Mend rips and tears to avoid further damage to items

during washing.

1. Sort and prepare your laundry

First wash cycle without laundry

Before washing clothes for the rst time, add liquid or powdered

HE detergent to the detergent dispenser. Choose the Quick

Wash cycle and run it without clothes. Use only HE detergent.

This initial cycle serves to ensure the interior is clean and the

dispenser drawer is ready for use before washing clothes.

■ Turn knits inside out to prevent pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up

lint from towels, rugs, and chenille fabrics.

■ Do not dry garments if stains remain after washing because

heat can set stains into fabric.

■ Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage

to your garments.

2. Add laundry products (if desired)

12

If using the optimal dose dispenser, do not need to

add detergent for every load, the dispenser will take

automatically.

4. Add HE detergent

NOTE: Do not add single-dose laundry packets, Oxi-type

boosters, color-safe bleach, or fabric softener crystals to

dispensers. They will not dispense correctly.

Adjust the selector, based on type of HE detergent used

(either liquid or powdered). See “Using the Dispenser

Drawer” section on how to use the dispenser.

Powdered

HE detergent

Liquid

HE detergent

Optimal Dispense Drawer

Single Load Dispenser Drawer

Place a load of sorted items loosely in the washer. Items need

to move freely for best cleaning and to reduce wrinkling and

tangling. Close the washer door by pushing it rmly until the

latch clicks.

■ Depending on load type and cycle, the washer can be fully

loaded but not tightly packed. Washer door should close

easily. See “Cycle Guide” for loading suggestions.

■ Mix large and small items and avoid washing single items.

Load evenly.

■ Wash small items in mesh garment bags. For multiple items,

use more than one bag and ll bags equally.

3. Load laundry into washer

■ Push load fully into washer. Make sure no items are resting on

the rubber seal to avoid trapping them between the seal and

the door glass.

13

Add liquid chlorine bleach to the bleach compartment.

Do not overll, dilute, or use more than manufacturer's

recommendation for dosing. Do not use color-safe bleach

or Oxi in the same cycle with liquid chlorine bleach.

IMPORTANT:

■ Always measure liquid chlorine bleach. Use a measuring

cup with a pour spout; do not guess.

■ Do not ll beyond the Max level. Overlling could cause

garment damage.

■ Do not use thickened, easy-pour, or no-splash bleach

when running the Clean Washer with affresh

®

cycle as

excess suds may occur.

6. Add liquid chlorine bleach

to dispenser (if desired)

Pour a measured amount of liquid fabric softener into

liquid fabric softener compartment. Always follow

manufacturer’s directions for correct amount of fabric

softener based on your load size.

Fabric softener is always dispensed in the last rinse,

even if Extra Rinse is selected.

IMPORTANT: Do not overll, dilute, or use more than

manufacturer's recommendation for dosing of fabric

softener. Do not ll past the Max line. Overlling dispenser

will cause fabric softener to immediately dispense into

washer.

■ Do not spill or drip any fabric softener onto the clothes.

■ Do not use liquid fabric softener dispenser balls in this

washer. They will not dispense correctly.

5. Add liquid fabric softener to dispenser

(if desired)

Single Load Dispenser Drawer

Optimal Dispense Drawer

Single Load Dispenser Drawer

Optimal Dispense Drawer

14

7. Touch POWER to turn on washer

Slowly close the Dispense drawer. Make sure the drawer is

closed completely, then touch POWER to turn on the washer

or go to Step 8.

8. Select CYCLE*

Turn cycle knob to select your wash cycle. See “Cycle Guide”

for details on cycle features. Press the knob for enabling the

Extra Power option.

The Extra Power option boosts stain ghting performance on

any wash cycle with a dual temperature wash, combining cold

and hot temperature during different phases of the wash time.

Press the knob to select this option.

The display will show the default settings for the selected cycle.

To adjust a setting, touch its name – Temp, Spin or Soil.

Adjusting settings will change the Estimated Cycle Time. Tightly

packing the load, unbalanced loads, or excessive

suds may also cause the washer to increase the cycle time.

9. Adjust settings, if desired*

10. Select any additional options*

To add an option to the cycle, touch its name – Fresh Hold,

Steam, Extra Rinse, Cycle Signal, or Control Lock.

To remove an option from the selected cycle, touch the

option again.

* Not all options and settings are available with all cycles.

See “Cycle Guide” for available options and settings.

11. Set detergent concentration

(On Optimal Dispense Model only)

You can adjust the detergent concentration setting if needed.

Default settings are 2x detergent concentration. If the detergent

concentration is not listed on the package, see “About

Detergent Concentration” to calculate the concentration.

To Adjust Dispenser Settings:

Press and hold the Temp & Soil until the display shows the

desired concentration level.

The washer will remember this level until it is changed.

15

12. Set a delayed wash

If you do not want to begin a cycle immediately, you may

choose the Delay Hrs. option. This will delay the start of

the wash cycle by up to 12 hours.

To set a delayed wash:

1. Touch SELECT Delay Start to set the desired delay time.

2. Touch and hold START to start the delay countdown.

The countdown stops blinking.

13. Touch and hold START to begin

wash cycle

Touch and hold START to start the wash cycle. To pause

a cycle in progress, touch START once, then touch and

hold again to continue the cycle. To cancel a cycle, touch

POWER.

Once you touch and hold START, you will hear the door lock,

unlock, and lock again. The washer door will remain locked

during the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2

missed garments, you may do so while the

“Add Garment” light is lit. The time allowed

to add a garment will vary based on cycle

selection and load size.

Touch START once; the door will unlock once

the washer movement has stopped. This may

take several minutes. Then close the door and

touch and hold START again to restart the cycle.

Adding items after “Add Garment” light

is off:

Cancel current cycle. Water will drain and you will need to

reselect cycle and restart.

For wash performance and optimal energy savings, add

garments only when the “Add Garment” light is on.

14. Remove garments promptly

after cycle is ﬁnished

Promptly remove garments after cycle

has completed to avoid odor and rusting of

metal objects on garments. When unloading

garments, pull back the door seal and check

for small items between the tub and the

washer drum.

If you will be unable to remove the load

promptly, use the Fresh Hold

®

/Fresh

Spin™ option. If the Fresh Hold

®

/Fresh

Spin™ option is selected, the washer will

automatically activate the fan and tumble

the load periodically for up to 24 hours. To turn off the Fresh

Hold

®

/Fresh Spin™ option, touch POWER. To set the washer so

that the

Fresh Hold

®

/Fresh Spin™ option does not come on for future

cycles, touch FRESH HOLD.

NOTES:

■ The door will remain locked while the Fresh Hold

®

/Fresh

Spin™ option is active. To cancel the option and unlock the

door, touch POWER.

■ A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

■ This washer has a tight seal to avoid water leaks. To avoid

odors, leave the door open to allow the washer to dry

between uses.

16

WASHER MAINTENANCE

WASHER CARE

Recommendations to Help Keep Your Washer Clean

and Performing at Its Best

1. Always use High Efciency (HE) detergents and follow

the HE detergent manufacturer’s instructions regarding

the amount of HE detergent to use. Never use more than

the recommended amount because that may increase the

rate at which detergent and soil residue accumulate inside

your washer which, in turn, may result in undesirable odor.

2. Use warm or hot water washes sometimes (not exclusively

cold water washes) because they do a better job of

controlling the rate at which soils and detergent accumulate.

3. Always leave the washer door slightly ajar between

uses to help dry out the washer and avoid the buildup

of odor-causing residue.

4. Periodically clean residue from all interior surfaces

of the glass window. For better care, wipe the entire

inside of the glass door with a damp cloth.

Cleaning Your Front-Loading Washer

Read these instructions completely before beginning

the routine cleaning processes recommended below.

This Washer Maintenance Procedure should be performed,

at a minimum, once per month or every 30 wash cycles,

whichever occurs sooner, to control the rate at which soils

and detergent may otherwise accumulate in your washer.

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items

from the washer.

2. Inspect the gray-colored seal between the door opening

and the drum for stained areas or soil buildup. Pull back

the seal to inspect all areas under the seal and to check

for foreign objects.

WASHER CARE (cont.)

3. If stained areas or soil buildup is found, wipe down

these areas of the seal using either of the following two

procedures:

a. affresh

®

Machine Cleaning Wipes Procedure:

i. When the cycle is complete, gently pull back the

rubber door seal and clean the entire surface with

the textured side of an affresh

®

Machine Cleaning

Wipe.

b. Dilute Liquid Chlorine Bleach Procedure:

i. Mix a dilute bleach solution, using ¾ cup (177 mL)

of liquid chlorine bleach and 1 gallon (3.8 L) of

warm tap water.

ii. Wipe the seal area with the dilute solution, using

a damp cloth.

iii. Let stand 5 minutes.

iv. Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open.

IMPORTANT:

■ Wear rubber gloves when cleaning with bleach.

■ Refer to the bleach manufacturer’s instructions

for proper use.

Cleaning the Inside of the Washer

This washer has a special cycle that uses higher water

volumes in combination with affresh

®

Washer Cleaner or

regular liquid chlorine bleach to thoroughly clean the inside

of the washer. Steam washer models also utilize steam to

enhance cleaning in this special cycle.

IMPORTANT: Do not use thickened, easy-pour, or no-splash

bleach when running the Clean Washer with affresh

®

cycle as

excess suds may occur.

NOTE: Read these instructions completely before beginning

the cleaning process.

Begin Procedure

1. Clean Washer with affresh

®

Cycle Procedure

(Recommended for Best Performance):

a. Open the washer door and remove any clothing

or items.

b. Use an affresh

®

Machine Cleaning Wipe or a soft, damp

cloth or sponge to clean the inside door glass.

c. Add an affresh

®

Washer Cleaner tablet to the

washer drum.

d. Do not add the affresh

®

Washer Cleaner tablet

to the dispenser drawer.

e. Do not add any detergent or other chemical to the

washer when following this procedure.

f. Close the washer door.

g. Select the Clean Washer with affresh

®

cycle.

h. On some models: Select the Fresh Hold

®

/Fresh Spin™

option to help dry the washer interior after the cycle is

complete.

NOTE: The washer remembers your last option

selection and will use it for future wash cycles until

you deselect that option. While the fan is ON, the

washer door will lock. To unlock the door, touch

POWER.

i. Touch and hold START to begin the cycle. The

Clean Washer with affresh

®

Cycle Operation is

described below.

Replace inlet hoses after 5 years of use to reduce the risk

of hose failure. Periodically inspect and replace inlet hoses

if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses:

■ Mark the date of replacement on the label with a permanent

marker.

■ Check that the old washers are not stuck on the washer

inlet valves.

■ Use new washers in the new inlet hoses to ensure

a proper seal.

WATER INLET HOSES

17

WASHER CARE (cont.)

2. Chlorine Bleach Procedure:

a. Open the washer door and remove any clothing

or items.

b. Open the dispenser drawer and add regular liquid

chlorine bleach to the MAX level in both the bleach

compartment and the fabric softener compartment.

Either traditional or HE chlorine bleach can be used.

IMPORTANT: Do not use thickened, easy-pour,

or no-splash bleach as excess suds may occur.

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage

over time.

c. Close the washer door and the dispenser drawer.

d. Do not add any detergent or other chemicals to the

washer when following this procedure.

e. Close the washer door.

f. Select the Clean Washer with affresh

®

cycle.

g. On some models: Select the Fresh Hold

®

/Fresh Spin™

option to help dry the washer interior after the cycle is

complete.

NOTE: The washer remembers your last option

selection and will use it for future wash cycles until

you deselect that option. While the fan is ON, the

washer door will lock. To unlock the door, touch

POWER.

h. Touch and hold START to begin the cycle. The

Clean Washer with affresh

®

Cycle Operation is

described below.

NOTE: For best results, do not interrupt cycle.

Description of Clean Washer with affresh

®

Cycle

Operation:

1. The Clean Washer with affresh

®

cycle will determine

whether clothing or other items are in the washer.

2. If no items are detected in the washer, it will proceed

with the cycle.

a. If any items are detected in the washer, “rL”

(remove load) will be displayed. The door will unlock.

Open washer and remove any garments from the

washer drum.

b. Touch POWER to clear the “rL” code.

c. Touch and hold START to restart the cycle.

3. Steam models only: During the rst 20 minutes of the

cycle, it will activate the steamer but the drum will not spin

or ll with water. You may see condensation on the door

glass during this initial phase. If you are using an affresh

®

Washer Cleaner tablet, it will not dissolve completely

during the steam phase. This is normal.

After the cycle is complete, leave the door open slightly to

allow for better ventilation and drying of the washer interior.

Cleaning the Dispensers

After a period of using your washer, you may nd some

residue buildup in the washer’s dispensers. To remove

residue from the dispensers, remove the drawer and wipe

the surfaces with an affresh

®

Machine Cleaning Wipe or a

damp cloth and towel dry either before or after you run the

Clean Washer with affresh

®

cycle. Use an all-purpose surface

cleaner, if needed.

IMPORTANT: Dispenser is not dishwasher safe.

Cleaning the Outside of the Washer

Use an affresh

®

Machine Cleaning Wipe or a soft, damp

cloth or sponge to wipe up any spills. Occasionally wipe the

outside of your washer to help keep it looking new. Use an

affresh

®

Machine Cleaning Wipe or mild soap and water.

IMPORTANT: To avoid damaging the washer’s nish,

do not use abrasive products.

3. Lift off cover panel by

pulling straight up.

To replace:

1. Slide cover panel back

onto posts on dispenser.

2. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot.

REMOVING THE DISPENSER

To remove:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out

to remove the dispenser.

CLEAN WASHER CYCLE REMINDER

NOTE: Not all models have the Clean Washer with affresh

®

cycle reminder light.

The Clean Washer with affresh

®

LED

will ash at the end of a wash cycle

when the washer has run 30 wash

cycles. This is a reminder to run the

Clean Washer with affresh

®

cycle.

If the Clean Washer with affresh

®

cycle is not turned on, the

LED will stop ashing at the end of a wash cycle after running

3 more regular wash cycles. After 30 more wash cycles are

completed, the Clean Washer with affresh

®

LED will again

ash at the end of a wash cycle as a reminder.

Optimal Dispense Drawer

18

Operate your washer only when you are home. If moving,

or not using your washer for a period of time, follow these

steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer to avoid ooding due

to water pressure surges.

HELPFUL TIP: Attach a reminder note to the washer

to turn the water back on before washer’s next use.

3. Clean the dispensers. See “Cleaning the Dispensers.”

NON-USE AND VACATION CARE

REMOVING THE DISPENSER (cont.)

Removing the Dispenser

To remove:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out

to remove the dispenser.

3. Lift off cover panel by

pulling straight up.

To replace:

1. Slide cover panel back

onto posts on dispenser.

2. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot.

Single Load Dispenser Drawer

19

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving

during freezing weather, winterize your washer.

To winterize washer:

1. Shut off both water faucets, then disconnect and drain

water inlet hoses.

HELPFUL TIP: Attach a reminder note to the washer

to turn the water back on before washer’s next use.

2. Put 1 qt (1 L) of R.V.-type antifreeze in washer drum

and run washer on Normal cycle for about 2 minutes to

mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

“Winter Storage Care” directions before moving.

3. Disconnect drain hose from drain system and from back

of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer drum.

6. Bundle power cord with a rubber band or cable tie to

keep it from hanging onto the ground.

IMPORTANT: Call for service to install new transport bolts.

Do not reuse transport bolts. Washer must be transported

in the upright position. To avoid structural damage to

your washer, it must be properly set up for relocation

by a certied technician.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1.

Refer to Installation Instructions to locate, level, and

connect washer.

2.

Before using again, run washer through the following

recommended procedure:

To use washer again:

1.

Flush water pipes and hoses. Reconnect water inlet

hoses. Turn on both water faucets.

2.

Plug in washer or reconnect power.

3.

Run washer through Power Wash cycle to clean washer

and remove antifreeze, if used. Use only HE detergent.

Use half the manufacturer’s recommended amount for

a medium-size load.

20

If you experience Possible Causes Solution

Error Code Appears in Display (for 2- and 3-digit displays)

Once any possible issues are corrected, touch POWER once to clear the code. Reselect and restart the cycle.

“Sd” or “Sud”

(excess suds) appears

in display

Excessive suds in washer. Washer is

running a suds-reduction routine.

Allow the washer to continue. Use only HE detergent. Always

follow the detergent manufacturer’s instructions to determine

the amount of detergent to use and base detergent quantity

on load size. Not all detergents labeled as High Efciency are

identical in formulation and their ability to reduce suds. For

example, natural, organic, or homemade HE detergents may

generate a high level of suds. If you use one of these and see

an “Sd” or “Sud” error code appear in the display, consider

using a different HE detergent.

Lo followed by FL or F8

followed by E1

or

Lo followed by FL or

F08 followed by E01

(water supply error)

appears in display

Check for proper water supply. Unit will drain for 8 minutes while door remains locked. The

drain cycle must be allowed to complete or the error code

cannot reset. When complete, touch POWER once to clear the

code. Then touch POWER again to restart washer.

If code appears again, call for service.

Both hoses must be attached and have water owing to the

inlet valve.

Both hot and cold water faucets must be ON.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

If used, auto shut-off connectors and hoses must be properly

installed and in working order.

Check for proper inlet hoses. Use only manufacturer’s recommended inlet hoses.

F9 followed by E1

or

F09 followed by E01

(drain pump system

error) appears in display

Check plumbing for correct drain

hose installation. Drain hose extends

into standpipe farther than 4

1

⁄2"

(114 mm).

Check drain hose for proper installation.

Make sure the drain hose is not kinked, pinched, or blocked.

Remove any clogs from drain hose.

Use drain hose form and securely attach to drainpipe or tub.

Lower drain hose if the end is higher than 96" (2.4 m) above

the oor.

Not using HE detergent or using too

much HE detergent.

Use only HE detergent. Always measure detergent and follow

manufacturer’s directions based on load size and soil level.

F5 followed by E2

or

F05 followed by E02

(door will not lock)

appears in display

Washer door not locking. Touch POWER to cancel the cycle. Check that the door is

closed completely and latching. Check for items in the washer

drum that may be keeping the door from closing completely.

“rL” (remove load)

appears in display

Load detected in drum during Clean

Washer with affresh

®

cycle.

Remove items from washer drum and restart Clean Washer

with affresh

®

cycle.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help –

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

La page est en cours de chargement...

Maytag MHW8630HW Le manuel du propriétaire

Ce manuel convient également à

Maytag MHW8630HW Le manuel du propriétaire

dans d''autres langues

Documents connexes

Autres documents