QUICK USER GUIDEQUICK USER GUIDE
Keep up with Wisycom online
Follow us on Facebook and Instagram.
You can also subscribe to our Youtube.
wisycom.com/social
Product Registration and Warranty
Register your product to extend your warranty
and receive update on latest rmware:
wisycom.com/registration
WISYCOM USA
5228 Eisenhower Avenue
Alexandria, VA 22304 - USA
+1 (888) WISYCOM
+1 (888) 947-9266
WISYCOM ITALY
Via Tiepolo 7/E
35019 Tombolo (PD) - ITALY
+39 0424 382605
This guide is intended to assist you with initial quick setup and operation
for your Wisycom product.
You can refer to Wisycom Autorized Distributors for technical Support and
information about service and repairs available in your area or contact us
directly by email.
Serial Number: Purchase Date:
Main Accesories (for an updated and exhaustive list look into wisycom web)
CAL48: Cable to connect a PHA48 to an
MTP40S in order to provide +48V phantom
power.
CAL120: Audio cable 120cm long
(approx. 47 inches) with Lemo 3 pins and
XLR-3F connectors.
PHA48: Plug on for XLR 3 adapter
capable of providing +48V Phantom power.
BCL: New easy to remove spring beltclip
designed for both MTP40S and 41S
UPK Mini: infrared programming
interface. Use it with Wisycom Manager
available for free at www.wisycom.com
ADT40: replace AA batteries with a
power adapter using the connector of your
choice.
MTPxx Quick user guide v1.01
Download Documentation and Firmware
Get latest user manual, tips, specications, rmware & software
on the download pages:
wisycom.com/products/d/MTP40s (.../MTP41S & .../MTP51-JP)
(*)The Wisycom microphone pocket transmitter model MTPxx complies with the following requirements:
FCC (Federal Communications Commission) Part 74. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operations. Changes or modication not ex-
pressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment. FCC ID can be found inside the battery compartment.
(**) EN - This device operates on a no-protection, no-interference basis. Should the user seek to obtain
protection from other radio services operating in the same TV bands, a radio licence is required. For
further details, consult Innovation, Science and Economic Development Canada’s document Client Pro-
cedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the
TV Bands. This device complies with Industry Canada RSS-123. This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause
interference. (2) This device must accept any interference, including interference that may cause undesired
operation of the device.
FR - Ce dispositif fonctionne selon un régime de non-brouillage et de non-protection. Si l’utilisateur devait
chercher à obtenir une certaine protection contre d’autres services radio fonctionnant dans les mêmes
bandes de télévision, une licence radio serait requise. Pour en savoir plus, veuillez consulter la Circulaire
des procédures concernant les clients CPC-2-1-28, Délivrance de licences sur une base volontaire pour
les appareils radio de faible puissance exempts de licence et exploités dans les bandes de télévision d’In-
novation, Sciences et Développement économique Canada. Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils radio RSS-123. L’émetteur/récepteur exempt de licence
contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement écono-
mique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes: 1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouil-
lage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Conformity
Europe
Conforms to the essential requirements of the RADIO Directive
2014/53/EU – Radio Equipment Directive (RED)
Japan
Certied Number: 202-LSC057 (model: MTP40S-JP)
Certied Number: 202-SMG071 (model: MTP40S-JB)
Certied Number: 202-LSD045 (model: MTP41S-JP)
Certied Number: 001-A14978 (model: MTP41S-JB)
Certied Number: 001-A17033 (model: MTP51-JP)
USA(*)
FCC-ID: POUMTP40SUSX (model: MTP40S-USX)
FCC-ID: POUMTP40SUS8 (model: MTP40S-US8)
FCC-ID: POUMTP41 (model: MTP41S-US)
FCC-ID: POUMTP41SUS8 (model: MTP41S-US8)
Canada(**)
IC: 11967A-MTP40SUSX (model: MTP40S-USX)
IC: 11967A-MTP41 (model: MTP41S-US)
MTP40S
MTP41S
MTP51JP
MTPxxMTPxx
MTP40
20-1-2021
Pwr Switch
Select “I” for power on
or “O” for off
IR Port
To activate Infrared scroll twice left
from main menu.
TIP: when you turn on the Tx, infrared
enabled automatically for 30 seconds.
Antenna Connector (*)
Type Lemo coaxial
High pass
lter
RF powerBattery status
Audio
max level (dBu)
or gain (dB)
Status Led
Select Switch
Push to activate the menu. Push left
and right to scroll through options.
Push to select option.
Tip: when PWR switch is in the off position
push and hold select switch to access menu
without activating RF
Ch Shortcut
Push to access channel/group/
frequency menu. Make selection
with select switch.
Gain Shortcut
Push to activate gain menu.
Adjust gain with select switch
and push to conrm
Batteries
Don’t forget to select battery type
installed within the options menu
to optimise battery life.
MTP40S: dual AA battery version
MTP41S: single AA battery version
MTP51-JP: single AA battery version
Mic Input
Load a mic PRESET to suit your
wiring or go to the wiring menu
line.
OFF: Transmitter is OFF
RED: RF power OFF/Transmitter ON
RED SLOW BLINK: battery < 25%
RED FAST BLINK: battery < 12%
RED FLASHES: modulation peak
GREEN: RF power is ON
BLUE: limiter is intervening
Ant Label Code Band MHz
Antenna type (*)
507
AWF30-B1
470-547
590
AWF30-B1
547-663
616
AWF30-B2
566-672
732
AWF30-B2
672-798
552
AWF30-B3
510-595
646
AWF30-B3
595-698
808
AWF30-BP-808
806-810
950
AWF30-B8-950
940-960
1k1
AWF30-B6-1k1
960-1160
1k2
AW30-B9-1250
1240-1260
-
1
-
2
WisyCom MTP40S Manuel utilisateur
- Taper
- Manuel utilisateur
dans d''autres langues
- English: WisyCom MTP40S User manual
