Gazebo Penguin 430133 Mode d'emploi

1

COOLER CART

INSTALLATION MANUAL

2

COOLER CART PARTS

PART

QTY

DIAGRAM

PART

QTY

DIAGRAM

LEFT CART LEG

L1

1

RUBBER PLUG

L

1

RIGHT CART LEG

L2

1

PLASTIC TUBE

M

1

TOP BOX

B

1

OPEN WRENCH

N

1

SHELF HANDLE

S

2

ALLEN WRENCH

O

1

BOTTOM PANEL

P

1

PLASTIC CLIP

C

4

BOLT

M6x18mm

F

16

WHEEL

E

4

BOLT

M6x30mm

G

4

DRAIN FASTENER

E2

1

BOLT

M6x32mm

H

2

WASHER

I

18

M6

PLASTIC WASHER

K

4

NYLON LOCK NUT

J

4

BOTTLE OPENER

A

1

SELF-TAPPING

SCREW

D

8

3

STEP 1

Install the 4 plastic clips (C) on the tablets.

4

STEP 2

Screw legs (L1/L2) to top box (B) with bolts (G, F) and washers (I) using allen wrench (O).

5

STEP 3

Attach shelf handle (S) to the top box (B) using bolt (F), washer (I), plastic washer (K) and nylon lock

nut (J).

Note: Do not over tighten.

6

STEP 4

Fix the corners of the bottom panel (P) under the brackets of the legs (L1/L2) using bolt (F) and

washer (I).

STEP 5

Fix the sides of the bottom panel (P) under the brackets of the legs (L1/L2) using bolt (H) and

washer (I).

Note: This is done from the inside.

7

STEP 6

Install wheels (E)

8

STEP 7

Turn the unit back to its standing position and make sure that the shelve handles are lifted.

Lock it to the tray on each side to make it flat.

9

STEP 8

Insert drain tube (M) into the drain fittings (E3, E4) and lock with drain fastener (E2).

10

STEP 9

Insert the rubber plug (L) into the drain hole.

11

STEP 10

Screw bottle opener (A) with bolts (F).

12

STEP 11

Fill it up and enjoy.

Note: Keep dry when not in use to prevent rust.

If any leakage, use latex by yourself.

13

MAINTENANCE NOTES

1. Please don't destroy the box until completely assembled.

2. The warranty only applies to the original purchaser with the bill.

3. In case of a defective or damaged part, or for any other questions concerning the product, please

contact the manufacturer directly.

4. Please have the parts list and part numbers on hand when ordering or requesting replacement parts.

ONE YEAR LIMITED WARRANTY

This product has been designed and manufactured to meet the highest standards of quality and durability.

Subject to the Conditions for Exercising the Warranty and the Limitations on the Warranty set forth below, it is

warranted to be free of material and manufacturing defects for a period of one year from the date of purchase.

Should the product become damaged, or the warranty period has expired, please contact Gazebo Penguin

Customer Service Department for a complete schedule of replacement parts and prices.

CONDITIONS FOR EXERCISING THE WARRANTY

In order to properly exercise your warranty, please comply with the following:

Carefully inspect the contents of the carton for missing or damaged components. Should you discover

damaged or missing parts, do not return the product to the place of purchase, but contact Gazebo

Penguin Customer Service Department at the numbers listed below (English, French & Spanish, Mon-

Fri 8:00AM to 4:00PM EST):

Reference: HER-HA

Montreal: (514) 276-3485

Elsewhere in Canada and the US: 1-800-737-7174

LIMITATIONS ON THE WARRANTY

1. The product is not warranted against damages due to vandalism, abuse, or falling or thrown objects.

2. The product is only warranted in the event it is installed in accordance with the Gazebo Penguin’s

written instructions enclosed with the product.

3. The product is not warranted in the event it has been improperly anchored.

14

CHARIOT REFROIDISSEUR

GUIDE D’INSTALLATION

15

PIÈCES DU CHARIOT REFROIDISSEUR

PIECES

QT

DIAGRAMME

PIECES

QT

DIAGRAMME

PATTE GAUCHE

L1

1

CAPUCHON EN

PLASTIQUE

L

1

PATTE DROITE

L2

1

TUBE EN PLASTIQUE

M

1

BOITE SUPERIEURE

B

1

CLE HEXAGONALE

N

1

POIGNÉE DE

TABLETTE

S

2

CLE ALLEN

O

1

PANNEAU

INFERIEUR

P

1

ATTACHE EN

PLASTIQUE

C

4

BOULON

M6x18mm

F

16

ROUE

E

4

BOULON

M6x28mm

G

4

FERMETURE

DE DRAIN

E2

1

BOULON

M6x32mm

H

2

RONDELLE

I

18

M6

ÉCROU

K

4

ECROU DE

VERROUILLAGE

EN NYLON

J

4

OUVRE BOUTEILLE

A

1

VIS

AUTOTARAUDEUSE

D

8

16

ÉTAPE 1

Installer les 4 attaches en plastique (C) sur les tablettes.

17

ÉTAPE 2

Vissez les pattes (L1 / L2) dans la boîte supérieure (B) à l'aide de boulons (G, F) et des rondelles (I) à

l'aide d'une clé hexagonale (O).

18

ÉTAPE 3

Fixez la poignée de tablette (S) à la boîte supérieure (B) en utilisant le boulon (F), la rondelle (I), la

rondelle en plastique (K) et l'écrou de verrouillage en nylon (J).

Remarque: Ne pas trop serrer.

19

ÉTAPE 4

Fixez les coins du panneau inférieur (P) sous les supports des jambes (L1/L2) à l'aide du boulon (F)

et de la rondelle (I).

ÉTAPE 5

Fixez les côtés du panneau inférieur (P) sous les supports des jambes (L1/L2) à l'aide du boulon (H)

et de la rondelle (I).

Remarque: Cette étape se fait à partir de l'intérieur.

20

ÉTAPE 6

Installer les roues (E).

La page est en cours de chargement...

Gazebo Penguin 430133 Mode d'emploi

Gazebo Penguin 430133 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents