Polaroid PiMX922 Manuel utilisateur

Catégorie
Haut-parleurs d'amarrage
Taper
Manuel utilisateur
2012 All rights reserved.
Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings; LLC, used
under license. All other trademarks are property of the respective owner, who
has not sponsored, endorsed or approved this product. PLR IP Holdings, LLC
does not manufacture this product or provide any Manufacturer’s Warranty or
support. This product is manufactured, distributed and sold by Starlight
Marketing (H.K.) Ltd.
Product features, specifications, and appearances are subject to change
without notice.
Changes are periodically made of this document. Changes, technical
inaccuracies, and typographic errors will be corrected in subsequent editions.
For service, support, and warranty information, visit www.polaroid.com
PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronics
waste initiatives. As responsible stewards of the environment, and to avoid
violation established laws, you should properly dispose of this product in
compliance with all applicable regulations, directives or other governances in
the area where you reside. Please check with local authorities or the retailer
where you purchased this product to determine a location where you can
appropriately dispose of the product.
You may also go to www.polaroid.com and reference About/Electronic
Recycling to learn more about the specific laws in your area and to locate a
collection facility near your home.
Warning and Precautions
WARNING
To prevent fire or shock hazards, do not expose this appliance to rain or moisture.
The apparatus should not be exposed to dripping or splashing and that no object
filled with liquids such as vases shall be placed on the apparatus.
The ventilation should not be impeded by covering the ventilation openings with
items such as newspapers, table cloths, curtains, etc.
No naked flame sources such as lit candles should be placed on the apparatus.
The main plug is used as the disconnect device, the disconnect device shall remain
readily operable. In order to disconnect the apparatus from the mains completely,
the plug should be disconnected from the mains socket outlet completely.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG
CAN BE FULLY INSERTED WITHOUT EXPOSING ANY PARTS OF THE BLADES.
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is
intended to alert the user to
the presence of uninsulated
“dangerous voltage” within
the product’s enclosure that
may be of sufficient
magnitude to constitute a risk
of electric shock to persons.
WARNING; TO REDUCE THE
RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE
PARTS INSIDE, REFER
SERVICING TO QUALIFIED
PERSONNEL.
The exclamation within an
equilateral triangle is intended to
alert the user to presence of
important operating and
maintenance (serving)
instructions in the literature
accompanying the appliance.
Important
Since the CD circuitry may cause interference to other radio tuners nearby, switch
this unit off when not in use or move it away from affected radio tuner.
(1)This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesirable
operation.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Caution: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
E-1
Warning and Precautions
This appliance generates uses and can radiate radio frequency energy and if not installed and used
in accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by tuning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on circuit different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV technician for help
This Class B appliance complies with Canadian ICES-003
IMPORTANT SAFETY INSTRUCTIONS
-Read before operating
This product was designed and manufactured to meet strict quality and safety standards. There
are, however, some installation and operating precautions which you should be particularly aware
of.
1. Read instructions- All the safety and operating instructions should be read before the
appliance is operated.
2. RETAIN INSTRUCTIONS- The safety and operating instructions should be retained for future
reference.
3. HEED WARNING- All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS- All operating and use instruction should be followed.
5. CLEANING- Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Exception: A product that is meant for uninterrupted service and that for some specific reason,
such as the possibility of the loss of an authorization code for a CATV converter, is not intended to
be unplugged by the user for cleaning or any other purpose, may exclude the reference to
unplugging the product in the cleaning description otherwise required in 131.8(5)
6. ATTACHMENTS- Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
7. WATER AND MOISTURE- Do not use this product near water-for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement or near a swimming pool and the
like.
8. ACCESSORIES- Do not place this product on an unstable cart, stand tripod, bracket, or table.
The product may fall causing serious injury to a child or adult and serious damage to the
product. Use only cart, stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the product. Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the manufacturer.
E-2
Warning and Precautions
9. A product and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
10. VENTALATION- Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating and these openings must
not be blocked or covered. The opening should never be blocked by placing the product on a
bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have adhered to.
11. POWER SOURCES- This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company. For products intended to operate from
battery or other sources refer to operating instruction.
12. GROUNDING OR POLARIZING- This product may be equipped with a polarized alternating
current line plug (a plug having one blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
Alternative Warning- This product is equipped with a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug only fit into a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
13. POWER-CORD PROTECTION- Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles and point where they exit from the appliance.
14. PROTECTIVE ATTACHMENT PLUG- The product is equipped with an attachment plug having
overload protection. This is a safety feature. See instruction Manual for replacement or resetting
of protective device. If replacement of the plug is required be sure the service technician has
used a replacement plug specified by the manufacturer that has used the same overload
protection as the original plug.
15. Lightning- For added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the product due to lightning and power-
surges.
16. POWER LINES- An outside antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact maybe fatal.
17. OVERLOAD- Do not overload wall outlets, extension cords, or integral convenience receptacles
as this can result in a risk of fire or electric shock.
E-3
Warning and Precautions
18. OBJECT AND LIQUID ENTRY- Never push objects of any kind into this product through
openings as the may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
19. SERVICING- Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
20. DAMAGE REQUIRING SERVICE- Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operation
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in performance- this indicates a
need for service.
21. REPLACEMENT PARTS- When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
22. SAFETY CHECK-Upon completion of any service or repairs to this product, ask the service
technician to perform safety checks to determine that the product is in proper operating
condition.
23. HEAT- The product should be situated away from heat sources such as radiators, heat
registers, stoves or other products (including amplifiers) that produce heat.
E-4
In the Box/Introduction
PiMX922 iPad/iPhone/iPod docking station
AC Adapter Remote User Aux Input
Manual Patch Cord
If any items are missing or damaged contact
Polariod Customer Service.
Your PiMX922 is a docking system for iPad - iPhone and iPod touch and is powered by
the supplied AC adapter.
An Aux input provides additional connectivity for other iPod models and other personal
audio equipment.
Compatibility
Your PiMX922 is recommended for use with iPad - iPhone or iPod touch models. Within
the text of this user guide, “iPad” refers to iPad - IPhone and iPod touch models. Other
models of iPods and personal audio devices may be connected by cable to the Aux in jack
on the back panel. You can control the unit by the iPad controls, remote control or the
touch pad on the unit.
“ Made for iPad” and “iPhone” and “iPod ”
means that an electronic accessory has been designed to connect specially to iPad, iPod
or iPhone respectively, and has been specified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
IPad, iPod and iPhone are trademarks of Apple inc. registered in the U.S. and other
countries.
E-5
Location of Controls
Front View
E-6
1. iPad/iPhone/iPod docking connector
2. Input Source selector
3. Previous track selector
4. Play / Pause
5. Next track selector
6. Volume down
7. Volume up
8. Light to indicate status
- Standby / flashing red light
- Aux input / green light
- iPad-iPhone-iPod / orange light
9. IR sensor remote receiver
Location of Controls
Rear View
10. Power input (insert AC adapter cord)
11. On/Off switch
12. Aux input jack 3.5 mm
E-7
Remote
1. Standby button/push for standby mode and push again to play
2. Vol Up / Volume up
3. iPad button/changes the source between iPad-iPhone iPod
4. Plays previous or skips to back tracks
5. Vol Down / Volume down
6. Treb + / increases treble
7. Treb - / reduces treble
8. Down / controls the menu down
9. Menu / press to enter the menu
10. Default / to restore factory settings
11. Mute / to mute the sound
12. AUX / to switch source aux input
13. Play-Pause /to play or pause the unit
14. Skips to next track
15. Bass + / increases bass
16. UP / controls the menu up
17. Bass - / increases bass
18. Enter / to enter the iPad-iPhone-iPod menu
E-8
General Operation
Connect AC adapter and put the On/Off button to the on position.
To play music connect iPad/iPhone/iPod to the docking station and push
the iPad button or use the on the touch panel of your PiMX922.
iPad must be in the on position
While unit is playing it will also charge when your iPad is in the docked
postion
E-9
Using the Controls
To adjust the volume use the remote and push the Vol +/- on the remote or
use the V+ / V- on the PiMX922 touch pad to lower or increase the Volume.
Press the , , , on either the remote or touch panel of the PiMX922
for play or pause / to search forward / to search for previous track
or other back tracks.
E-10
Using the Controls
Press menu to access the menu of iPad/iPhone/iPod
Use control buttons to navigate the menu
Press the Treb + / Treb and Bass + / Bass - on the remote to adjust
Treble and Bass
Press the default button on remote to reset the factory settings. Press the
to mute the unit and press again to cancel mute.
E-11
Using the Controls
Press Standby to put the unit in Standby mode, the light indicator will be red.
Turn the unit off before you remove the iPad / iPhone / iPod
You can connect an external audio device through AUX input by the 3.5mm
audio patch cable, if the unit is not connected to an iPad / iPhone / iPod the
unit plugged in through the Aux input will automatically play.
E-12
Technical Specifications
Product Name: Digital Active Speaker
Model number: PiMX922
Frequency response: 60Hz 20KHz
Amplifier output power : Left/Right 3.5W x 2
Subwoofer : 12W x 1
Amplifier Input sensitivity:
400mV
Amplifier SNR :
70dB
Amplifier distortion:
1 %
Speaker units: tweeter 39mm x 2, subwoofer 102mm x 1
iPad / iPhone : rated terminals 2.1A
E-13
Warranty
LIMITED WARRANTY
We at Cosmo believe you will be pleased with your new Polaroid Product. Please read this
Warranty carefully. Should you find your unit is not operating properly, Cosmo will provide
you the following options (at Cosmo’s discretion), providing the manufacturing defect is
verified along with the date and proof of purchase.
1 Year Warranty
To obtain Warranty Service and Trouble shooting information online
visit our website at www.polaroid.com or contact Polaroid’s Consumer Care
Centers listed below:
Polaroid Service Centre : Canada 1-888-208-4108
CUSTOMER OBLIGATIONS
This warranty applies to the product from the original date of purchase at retail. Therefore,
the owner must provide a copy of the original, dated bill of sale. No warranty service will be
performed without a bill of sale. Transportation to the Service Depot is the responsibility of
the owner. Return of product will be pre-paid for by Cosmo Service Depot.
This warranty is void if the product is:
A) Damaged through negligence, abuse, misuse, accident or acts of God.
B) Used in commercial applications or rentals.
C) Modified or repaired by anyone other than COSMO or their expressly
authorized representative.
D) Damage resulting from the improper connection to equipment of other
manufacturers.
This warranty does not cover:
A) Damage or improper operation caused by the failure to follow the operating
instructions provided with the product.
B) Routine adjustments to the product that can be performed by the customer
as outlined in the owner’s manual.
C) Damage to DVD, Compact disc or MP3 Device.
D) Signal reception problems caused by external factors.
E) Products not purchased in Canada.
F) Damage to the products used outside Canada.
Warranty
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES SOLELY TO THE ORIGINAL
PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE
PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE
EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF THE
ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR
IMPLIED SHALL APPLY TO THE PRODUCT THEREAFTER. COSMO MAKES NO
WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR
PURPOSE OR USE.
THE EXTENT OF COSMO’S LIABILITY UNDER THIS LIMITED WARRANTY IS THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AT THE SOLE DISCRETION OF
COSMO AND IN NO EVENT WILL COSMO’S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY THE PRUCHASER. UNDER NO CIRCUMSTANCES SHALL COSMO BE LIABLE
FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL FORESEEN, UNFORESEEN,
SPECIAL OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH
THE USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN CANADA. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. HOWEVER, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY
FROM PROVINCE TO PROVINCE. SOME PROVINCES DO NOT ALLOW LIMITATIONS
ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE,
THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.
THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS.
DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Service Centre Address:
Cosmo / Polaroid Service Centre
55 Travail Road Unit 2
Markham, Ontario
L3S 3J1.
2012 All rights reserved.Polaroid et Polaroid & Pixel sont des marques de
commerce de PLR IP Holdings; LLC, utilises sous license. Toutes les autres
marques de commerce sont la propriété de leurs propriétaires respectifs qui
n’ont pas commandité, endosou appouvé ce prodduit. PLR IP Holdings, LLC
n’est pas le fabricant de ce produit ne fournit pas de garantie ou d’assistance
du fabricant. Ce produit est fabriqué, distribute et vendu par dist Starlight
Marketing (H.K.) Ltd.
Les caractéristiques, les specifications, et l’apparence de ce produit sont
sujettes à changement sans préavis.
Des modification sont apportées périodiquement à ce document. Les
changements, inexactitudes techniques et erreurs typographiques seront
corrigés dans des é ultérieures. Pour plus de renseignements concernant l’en
PLR IP Holdings, LLC, ses licenciés et affiliés, soutiennent pleinement
l’ensemble des initiatives des déchets électroniques. En tant que gardiens
responsables de l'environnement, et afin d’éviter toute violation des lois
établies, vous devez éliminer ce produit correctement et conformément à toutes
les réglementations, directives ou autres gouvernances applicables dans votre
région de résidence. Veuillez consulter les autorités locales ou le revendeur où
vous avez acheté ce produit pour déterminer l’endroit où vous pouvez éliminer
ce produit d’une manière appropriée.
Vous pouvez aussi visiter le site Web www.polaroid.com et consulter la page À
Propos/Recyclage Électronique (About/Electronic Recycling) pour davantage
de renseignements sur les lois spécifiques votre région et our localiser un
centre de collecte près de chez vous..
Avertissements et precautions
Avertissement
Pour éviter les risques d’incendie ou de chocs électrques, n’exposez pas cet
appareil â la pluie ou â l’humidité.
L’apparell ne devrait pas être exposéaux gouttes ou aux éclaboussures et aucun
objet rempli de liquide, tels que des vases, ne devrait placé l’appareil.
La ventilation ne devrait pas être bloquére bloquére en recouvrant les orifices les
de ventilation avec tels que des journaux, napppes, rideaux, etc.
Auccune source de flammes nues, telle que des bougies allumées, ne devrait être
placée sur l’appariel.
La prise principale est utilisée comme dispositif de disjonction. Le dispositif doit
rester facilement accessible.
Afin de débrancher l’appareil complètement du la prise de courant, la prise
principale doit être débranchée de la prise Principale complètement.
ATTENTION
POUR ÉVITER UN CHOC ÉLECTRIQUE, N’UTILISEZ PAS CETTE FICHE (POLARISÉE)
AVEC UN FIL DE RALLONGE, UNE PRISE OU AUTRE SORTIE, À MOINS QUE LA FICHE
PUISSE ÊTRE ENTIÉREMENT INSÉREE SANS EXPOSER UNE PARTIE DES LAMES.
Le signe d’éclair avec une pointe
de flèche Եl à l’intérieur d’un
triangle équilatéral est conçu
pour avertir l’utilisateur de la
présence d’une tension
dangereuse non isolée à
l’intérieur de l’enceinte de cet
appareil, qui peut avoir une
magnitude suffisante pour
constituer un risque de choc
électrique à toute personne.
AVERTISSEMENT: POUR RÉDUIRE
LE RISQUE DE CHOC ÉLECTRIQUE,
NE PAS ENLEVER LE COUVERCLE
(OU L’ARRIÈRE). AUCUNE PIÈCE
POUVANT ÈTRE RÉPAREE PAR
L’UTILASATEUR NE SE TROUVE À
L’INTÉRIER,SE RÉFÉRER ÀDU
PERSONNEL DE RÉPARATION
QUALIFIÉPOUR RÉPARER CET
APPARIEL.
Le point d ’exclamation à
l’intérieur d’un triangle
équilatéral est conçu pour
avertir l’utilisateur de la
présence d’instructions de
fonctionnement et
d’entretien (service)
importantes dans la
documentation qui
accompagne cet appareil.
IMPORTANT :Le circuit CD risquant de causer du brouillage à d’autres syntoniseurs
radio situés à proximité, éteignez cet appareil lorsqu’il n’est pas utilisé ou placez-le
du syntoniseur radio affecté.
F-1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

Polaroid PiMX922 Manuel utilisateur

Catégorie
Haut-parleurs d'amarrage
Taper
Manuel utilisateur

dans d''autres langues