Fagor FE-539 Le manuel du propriétaire
- Catégorie
- Machines à laver
- Taper
- Le manuel du propriétaire
CERTIFICAT DE GARANTIE / CERTIFICADO DE GARANTIA
WARRANTY CERTIFICATE / CERTIFICADO DE GARANTIA
Avant d’installer et d’utiliser l’appareil, lisez attentivement le livret d’instructions
Antes de instalar e utilizar o aparelho leia cuidadosamente o manual de instruções
Before installing and use of the appliance please read carefully the instruction book
Antes de instalar y usar el aparato lea cuidadosamente el manual de instrucciones
Manuel d’installation et d’utilisation de l’appareil
Manual de intalação e utilização do aparelho
User installation and operation manual
Manual de instalación y uso del aparato
COD.: kg.
N.:
FRANÇAIS 4
INSTALLATION ET MONTAGE 5 - 7
UTILISATION DE L’APPAREIL ET CONSEILS PRATIQUES 8 - 14
NETTOYAGE ET ENTRETIEN DE L’APPAREIL 14 - 16
REMARQUES SUR L’ENVIRONNEMENT 16
PORTUGUÊS 17
INSTALAÇÃO E MONTAGEM 18 - 20
UTILIZAÇÃO DO APARELHO E CONSELHOS PRÁTICOS 21 - 27
MANUTENÇÃO E LIMPEZA DO APARELHO 27 - 29
ADVERTÊNCIAS SOBRE O MEIO AMBIENTE 29
ENGLISH 30
INSTALLATION AND ASSEMBLY 31 - 33
INSTRUCTIONS FOR USE AND PRACTICAL ADVICE 34 - 40
MAINTENANCE AND CLEANING 40 - 42
ENVIRONMENTAL WARNINGS 42
ESPAÑOL 43
INSTALACIÓN Y MONTAJE 44 - 46
USO DEL APARATO Y CONSEJOS PRACTICOS 47 - 53
MANTENIMIENTO Y LIMPIEZA DEL APARATO 53 - 55
ADVERTENCIAS SOBRE EL MEDIO AMBIENTE 55
INDEX / ÍNDICE / CONTENTS / INDICE
La Garantie est constituée comme une garantie différente et additionnelle, qui n’altère pas les droits dont jouit le
consommateur conformément aux Lois en vigueur, et octroyée concrètement et spécifiquement au client usager de
l’appareil mentionné dans ce document.
La Garantie couvre, pour une période de deux ans, à compter de la date de réception de cet appareil, toutes les
réparations éventuellement réalisées par le Service d’Assistance Technique Officiel.
EXCLUSIONS DE LA PRÉSENTE GARANTIE.
Cette Garantie ne couvre pas les cas mentionnés ci-après, dont la totalité du coût de la réparation sera, par consé-
quent, à la charge du client :
a) Les pannes provoquées par négligence ou usage inapproprié de l’appareil par le consommateur.
b) Les pannes causées par des situations fortuites, de force majeure (phénomènes atmosphériques ou géologiques)
et sinistres.
c) Les pannes ou dommages provoqués par une installation incorrecte, non-légale ou par l’utilisation d’énergie ou de
combustible non-aptes.
d) Les opérations de maintenance périodique du produit.
e) Les appareils utilisés dans des établissements industriels ou commerciaux.
f) Les dommages et préjudices éventuellement causés à l’usager, à la suite du non-fonctionnement de l’appareil pour
cause de panne.
ANNULATION DE LA PRÉSENTE GARANTIE
La présente Garantie sera annulée et perdra toute validité si l’appareil a été manipulé, modifié ou réparé par des per-
sonnes non-autorisées ou par des services techniques autres que les SAT officiels de la marque.
TRÈS IMPORTANT: POUR POUVOIR BÉNÉFICIER DE CETTE GARANTIE, IL S’AVÈRE INDISPENSABLE QUE L’USAGER
ACCRÉDITE, PAR DEVANT LE SERVICE TECHNIQUE AUTORISÉ PAR LE GARANT, LA DATE D’ACHAT DE L’APPAREIL
SUR PRÉSENTATION DE LA FACTURE OFFICIELLE. POUR LES APPAREILS LIVRÉS DANS DES IMMEUBLES NEUFS, IL
FAUDRA, EN OUTRE, DÛMENT ACCRÉDITER LA DATE DE DISPOSITION D’USAGE DE L’APPAREIL.
La présente Garantie sera uniquement valable sur le territoire de l’U.E et elle concerne exclusivement l’appareil men-
tionné et pour lequel elle a été octroyée par Fagor Electromenager B.P. 139-Z-J JALDAY 64501 St. Jean de Luz
CEDEX France.Pour les autres pays, consultez votre distributeur.
CONDITIONS GÉNÉRALES DE GARANTIE
2 ANS
31
WASHING MACHINE
IMPORTANT
Keep the transit bolts in a safe place in case you need to move your machine again at a
later date.
INSTALLATION AND ASSEMBLY
1
UNPACKING AND REMOVING TRANSIT BOLTS FROM THE
WASHING MACHINE
UNPACKING
REMOVING THE
TRANSIT BOLTS
a Remove the screws
that attach the plastic
plates to the back of
the machine.
b Unscrew and remove
the 3 transit bolts.
c Refit the plastic pla-
tes and screws
removed in step A.
a/c
b
2
LEVELLING
Level the washing
machine using the
adjustable feet. This
will reduce the noise
level and prevent the
machine from moving
during the spin cycle.
English
3
CONNECTING TO THE WATER SUPPLY
Inside the drum you will
find water inlet pipes.
a Connect the angled
end of the pipe to
the threaded electro-
valve inlet located at
the rear of the
machine.
b Connect the other
end of the pipe to the
water inlet and tigh-
ten the nuts.
We recommend that
your wastewater plum-
bing installation include
a fixed standpipe with
and overall height bet-
ween 50 and 70 cm
above floor level.
Avoid folds and bends
in the drain pipe and
make sure that it is not
too tight.
max.
70 cm
min.
50 cm
IMPORTANT
It is important that the elbow of the drainpipe is well fitted into the stand pipe to avoid any
risk of it falling out and causing flooding.
If your washing machine is equipped with a hot water inlet, connect one end of the red thre-
aded pipe to the hot water tap and the other to the electrovalve with the red filter.
a
b
Do not remove the spe-
cifications plate, it con-
tains vital information.
4
CONNECTING TO THE ELECTRICITY SUPPLY
Consult the specifications
plate located on the port-hole
before connecting to the elec-
tricity supply. Make sure that
the voltage supplied to the
plug corresponds with that
indicated on the plate.
IMPORTANT
It is very important that the washing machine be connected to a good-quality earth installa-
tion.
The electrical installation, plug, socket, fuses or automatic switch and meter must be desig-
ned to withstand the maximum power setting indicated on the specifications plate.
If the power cord is damaged, it must be replaced by one with the same reference number,
only available from an authorised service centre.
33
a b
5
INSTALLING THE WASHING MACHINE UNDER A KITCHEN
WORKTOP
You can also install
your washing machine
under your kitchen
worktop.
If you wish to change
the washing machine’s
upper surface, ask the
Technical Assistance
Service for a protective
cover.
a Remove the side
screws and tap the
existing surface
lightly towards the
back of the machi-
ne to remove.
b Unscrew and remo-
ve supports.
c Fit and screw the
protective sheet into
place. You can now
position your was-
hing machine under
your kitchen worktop.
c
6
PRELIMINARY CLEANING
Once you have insta-
lled your washing
machine, we recom-
mend that you run pro-
gramme 2 at 60ºC on
an empty cycle (with
neither clothes nor
detergent).
This serves to check
the installation, connec-
tions and drainage sys-
tem, as well as tho-
roughly cleaning the
interior before washing
any laundry.
Select programme 2 and set
temperature to 60ºC
Press the Start/Stop key. The
pilot light should come on
English
PREPARING CLOTHES PRIOR TO WASHING
1
Before inserting laundry
into the drum, make
sure all pockets are
empty. Small objects
may obstruct the moto-
rised water drainage
pump.
Sort your was-
hing according to
fabric or compo-
sition. We recom-
mend that you wash
sensitive garments on
delicate programmes.
Woollen garments
should be washed on
the special woollens
programme.
Sort your washing
according to dirti-
ness.
a Slightly soiled gar-
ments should prefe-
rably be washed on
a short cool pro-
gramme.
b Normally soiled
garments do not
require a prewash
cycle.
c Heavily soiled gar-
ments should be
washed on a long
programme with
prewash.
Sort your was-
hing according to
colours. Wash whites
and colours separately.
WASHING MACHINE
INSTRUCTIONS FOR USE AND PRACTICAL ADVICE
IMPORTANT
It is best to load your machine to its full capacity. This
way, you will save water and energy.
Whenever possible, we recommend that you wash items
of different sizes in the same wash programme, as
this helps the wash action and aids the distribution of
clothes in the drum during the spin cycle. It also helps
reduce the noise level.
IMPORTANT
Before washing, make
sure that your woollen
garments are machine
35
Compartment for Prewash detergent
2
DETERGENTS AND ADDITIVES
Add detergent or addi-
tives to the dispenser
before the start of the
wash programme.
Depending on the
model, the dispenser
will have either three or
four compartments.
Compartment for Main Wash detergent
Compartment for liquid additives (fabric softeners, etc)
Compartment for liquid whiteners
(bleach, etc.)
IMPORTANT
The level of liquid should never exceed the MAX level
marked on the compartment wall.
You can also use liquid
detergent in your was-
hing machine. To do
this, you need the
optional dispenser
which can be obtained
through the Technical
Assistance Network.
The optional dispenser
should be placed in the
Main Wash compartment.
Remember that the
amount of detergent to
be used will always
depend on:
● The size of the load.
● The soil level of the
garments to be
washed.
● The hardness of the
water (details regar-
ding the hardness
of the water can be
obtained from your
local authorities).
Remember that concentrated detergents are now
available that are more environmentally-friendly.
Using more detergent than necessary will not
improve the results of your wash. In addition to
being wasteful, it also harms the environment.
We therefore recommend that you follow the ins-
tructions given by the detergent manufacturer.
ENVIRONMENTAL NOTE
English
ENVIRONMENTAL NOTE
3
SELECTING THE WASH PROGRAMME
Your washing machine
incorporates three
types of programme:
a
Normal wash
programmes;
for hard-wearing
fabrics.
b Delicate wash
programmes;
for delicate fabrics.
c Woollen
cycles; for was-
hing woollen gar-
ments.
To select a Wash
Programme, turn the
Programme Selector
Control Knob clockwi-
se until the program
number coincides with
the marker on the con-
trol panes. Never try to
force the knob in the
opposite direction.
Always try to select the most appropriate program-
me for your load and avoid running unnecessary
prewash cycles. This will save you money and
help protect the environment.
37
13-programme washing
machines
10-programme washing
machines
10-programme washing
machines
DELICATE, SYNTHETIC AND MIXED FABRICS, ETC.
(recommended maximum load: 2.5/3 kg.)
(half of the maximum washing machine load).
WOOLLEN FABRICS
(recommended maximum load: 1.0 kg.)
Recommended
temp. range
Programme
num.
Approx.
duration (min)
Approx.
duration (min)
Programme
num.
Soil level and colour
Rinse with automatic absorption of additi-
ves + final spin
Drain and gentle spin
White
Non colour-fast
Non colour-fast
60-50ºC
40ºC - Cold
Medium
soil
Light
soil
40ºC - Cold
55-60
45-50
40-45
7
8
10
70
50
40
5
7
8
10
6
11
12
10
5
6
Recommended
temp. range
Programme
num.
Approx.
duration (min)
Approx.
duration (min)
Programme
num.
Soil level and colour
Drain with no spin
Non colour-fast 40ºC - Cold
Light
soil
40-45 9 459
10 5
13 3
13-programme washing
machines
10-programme washing
machines
Recommended
temp. range
Programme
num.
13-programme washing
machines
Approx.
duration (min)
Approx.
duration (min)
Programme
num.
Soil level and colour
Rinse with automatic absorption of additi-
ves (optional) + final spin
Long spin
White
Colour-fast
Non colour-fast
White
Colour-fast
Non colour-fast
90-70ºC
60-50ºC
40ºC - Cold
Heavy
soil
Light
soil
90-70ºC
60-50ºC
40ºC - Cold
115-135
125-135
110-120
100-120
110-120
95-100
1
2
3 (*)
4
125
100
85
70
1
3
4
40
8
5
6
30
5
2 (*)
COTTON, LINEN AND CANVAS FABRICS, ETC.
(recommended maximum load:
see warranty
certificate on front page)
QUICK WASH
Normal wash programmes
Delicate wash programmes
Woollen wash programme
Liquid whiteners Prewash Main Wash Liquid additives
*
*
*
*
English
(*) Energy label data based on this programme, in accordance with EN60456.
These functions are
activated when the key
protrudes from the
control panel, enabling
you to see the symbol
printed on it.
Anti-crease but-
ton:
Press this button to
interrupt the last rinse
cycle and keep the
clothes immersed in
water inside the drum.
Press again to continue
the programme and
carry out the drain and
spin cycles. This func-
tion is used, for exam-
ple, when you are out
and do not want to
complete the program-
me until you arrive
home, in order to
avoid creasing during
the period between the
spin cycle and unloa-
ding.
Spin cancel but-
ton: Press this button to
cancel the final spin
cycle. This function is
used to prevent crea-
sing when washing spe-
cial fabrics.
Spin speed selec-
tor button: Press this
button to reduce the spin
speed. It is used to pro-
tect very worn garments
or those with special
finishes.
Extra rinse button:
Extra: Increases the
final rinse cycle. This
function is used when
washing large loads and
garments belonging to
people with sensitive
skin. Warning: this func-
tion increases water con-
sumption!
Cold wash button:
Press this button to
select a cold wash where
the water is not heated at
all.
4
SELECTING ADDITIONAL FUNCTIONS
Depending on the model, your washing machine will have all or
some of the following functions:
39
English
The Start/Stop but-
ton works in the same
way as the additional
function keys, i.e. it is
activated (machine ON)
when it protrudes from
the control panel, ena-
bling you to see the sym-
bol printed on it.
The ON/OFF pilot
light, which indicates
that the washing machi-
ne is switched on with
the door locked, will
come on a few seconds
after you press the Start
button. These few
seconds enable the
machine to activate the
Door Safety System.
When the washing
machine is switched on,
the wash programme
can be interrupted by
pressing the Start/Stop
button once again.
When this happens, the
pilot light will go off and,
approximately two
ON/OFF pilot light
When interrupting a
programme to add or
remove a garment,
make sure that the
water level does not
exceed the flood level
indicated on the door,
and that the temperature
inside the drum is not
too high. Press the
Start/Stop button once
again to continue the
programme from the
same cycle in which it
was interrupted.
You can always select a
lower temperature than
that recommended for
the programme. If you
wish to run a cold wash
with no water heating,
turn the control to
COLD
5
SELECTING THE WASH TEMPERATURE
6
STARTING YOUR MACHINE
To select a wash tem-
perature, gently turn
the Temperature
Selector Control Knob
until the temperature
coincides with the mar-
ker on the control
panel.
IMPORTANT
IMPORTANT
minutes later, the Door
Locking Safety System will
release the door, enabling
you to open it.
WASHING MACHINE
7
WARNINGS
● To reduce the
noise level produ-
ced during the spin
cycle, level the
machine using the
adjustable feet.
● Try to wash items of
different sizes in the
same wash pro-
gramme, as this
aids the distribution
of clothes in the
drum during the
spin cycle.
● All models incorpo-
rate a safety spin
mechanism that
prevents the spin
cycle from being
carried out if the
load is not properly
distributed in the
drum, thus protec-
ting the machine
from excessive
vibration. If, at the
end of a program-
me, your clothes
have not been pro-
perly wrung, run
another spin cycle,
this time making
sure that the load is
uniformly distributed
in the drum.
In order to make it more environmentally-friendly,
your washing machine is equipped with a system
capable of adapting to different operating condi-
tions (load and type of fabric), thereby guarante-
eing optimum water and energy consumption. This
means that during the wash cycle, the water level
seen through the hatch may appear low. Do not
worry. This will in no way affect the efficiency of the
wash and rinse operations.
ENVIRONMENTAL NOTE
After each wash, leave
the loading door open
for a while to allow air to
circulate inside the
drum.
From time to time and
depending on the hard-
ness of the water in your
area, it is a good idea to
run a complete wash
cycle using a decalcif-
ying product. This will
help prolong the life of
your machine.
MAINTENANCE AND CLEANING
Before carrying out any
cleaning or maintenan-
ce operations, we
recommend that you
unplug your washing
machine from the
mains supply.
IMPORTANT
41
English
Clean the detergent dispenser
whenever you see a build-up
of washing power deposits.
a Pull the detergent dispen-
ser outwards to remove.
b Clean the different dispen-
ser compartments using
warm water and a brush.
c Clean the siphons in the
additive compartment
also.
1
CLEANING THE DETERGENT DISPENSER
Pull the dispenser out as far
as it will go and then tug hard
to remove completely.
Clean the accessible filter whe-
never the drainage pump is
blocked by foreign bodies.
a Loosen the base by gently
pulling on the sides and tur-
ning downwards. Then undo
the fasteners.
If there is no side access,
introduce a small screwdriver
in the three slots on the
upper part of the base, in
order to lever it and loosen
the hooks.
b Use a plate or other contai-
ner under the filter to collect
the water that will be relea-
sed when it is loosened.
c Turn the filter a quarter- or
halfway sideways towards
the left. Water will start to
come out.
d When you are finished taking
the water out of the washing
machine, turn the filter around
several times until you can
take it out fully.
e Remove any objects or fluff
that may be in the filter.
f Replace the filter and the
base in their places.
2
CLEANING THE ACCESSIBLE FILTER
Replace the dispenser in
the washing machine.
In order to avoid
burns, this opera-
tion should not be
carried out when
the wash water
temperature is
over 30ºC.
IMPORTANT
WASHING MACHINE
Use warm soapy water
or a gentle cleaning
product to clean the
outside of the washing
machine. Do not use
abrasive products or
solvents.
After cleaning, dry tho-
roughly with a soft
cloth.
3
ENVIRONMENTAL WARNINGS
ENVIRONMENTAL NOTE
In the interests of environmental protection, take your used machine to an official
collection point or recycling centre for disposal.
Before disposing of your used machine, cut off the electrical power cable.
Fagor Electrodomésticos, S. Coop.
Apartado 49
Tel. (943) 71 91 00 / 01
Fax (943) 79 68 81
Bº San Andrés, 18
20500 MONDRAGÓN (Guipúzcoa)
www.fagor.com
e-mail: info@fagor.com
LJ6A020Q4/2
02/04
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Fagor FE-539 Le manuel du propriétaire
- Catégorie
- Machines à laver
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: Fagor FE-539 Owner's manual
