Ricoh Pro L5130 Le manuel du propriétaire

Taper
Le manuel du propriétaire

Ce manuel convient également à

Français
English
Exigences d'entretien et de
maintenance quotidiens
Requests for Daily Care
and Maintenance
Requests for
Daily Care and
Maintenance
For safe and correct use, be sure to read the Safety Information
in Read This First before using the machine.
For information not in this manual, refer
to the PDF files on the supplied CD.
Appendix
Daily Care and Maintenance
Getting Started
Requests for
Daily Care and
Maintenance
English
English
TABLE OF CONTENTS
1. Getting Started
Safety Precautions.............................................................................................................................................. 3
About Operating Environments......................................................................................................................... 5
Conditions for Installation Locations............................................................................................................. 5
2. Daily Care and Maintenance
About the Frequency of Maintenance.............................................................................................................. 7
Daily Maintenance...........................................................................................................................................10
Shaking a White Ink Cartridge...................................................................................................................10
Cleaning the Media Guides....................................................................................................................... 12
Performing Maintenance Once Every 1.5 Months....................................................................................... 14
Cleaning the Waste Ink Line....................................................................................................................... 14
Cleaning Each Time You Replace the Nozzle Cleaning Cartridge.............................................................17
Cleaning the Caps.......................................................................................................................................17
Performing Maintenance Once a Year.......................................................................................................... 21
Cleaning the Area around the Print Heads................................................................................................21
Maintenance When Needed..........................................................................................................................26
Cleaning the Exterior...................................................................................................................................26
Cleaning the Pre-heater...............................................................................................................................27
Cleaning the Roll Holder and Guide Groove........................................................................................... 28
Cleaning the Platen......................................................................................................................................28
Cleaning the Pinch Rollers...........................................................................................................................29
Cleaning the Media Sensors...................................................................................................................... 30
Cleaning the Nozzle Faces of the Print Heads..........................................................................................31
Replacing Consumables..................................................................................................................................34
Precautions for Replacing Consumables....................................................................................................34
Disposal of Used Consumables..................................................................................................................36
Replacing an Ink Cartridge.........................................................................................................................36
Replacing a Cleaning Cartridge................................................................................................................ 39
Replacing a Flushing Cartridge.................................................................................................................. 42
Replacing a Waste Ink Bottle......................................................................................................................44
3. Appendix
About Ink...........................................................................................................................................................47
Supported Ink...............................................................................................................................................47
1
Setting Order of Ink Cartridges.................................................................................................................. 48
How to Store Ink Cartridges....................................................................................................................... 48
Precautions for Handling Ink Cartridges....................................................................................................49
About Media.................................................................................................................................................... 51
Supported Media........................................................................................................................................ 51
How to Store Media....................................................................................................................................52
Precautions for Handling Media................................................................................................................ 52
About Flushing Liquid and Displacement Liquid............................................................................................ 55
How to Store Flushing Cartridges and Displacement Cartridges............................................................ 55
Precautions for Handling Flushing Cartridges and Displacement Cartridges.........................................55
How to Resolve Nozzle Defects..................................................................................................................... 57
Example of Defects in Printing.....................................................................................................................58
List of Consumables..........................................................................................................................................60
2
1. Getting Started
This section describes the safety precautions before use and the installation environment.
Safety Precautions
Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these
items in the vicinity of this machine. Doing so could result in fire or electric shock.
Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Fire or electric shock could result
from spillage or if such objects or substances fall inside this machine.
If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
If metal objects, or water or other fluids fall inside this machine, you must turn off its power
immediately. After turning off the power, be sure to disconnect the power cord plug from the
wall outlet. Then contact your service representative and report the problem. Do not use the
machine. Doing so could result in fire or electric shock.
Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside
this machine are high voltage components that are an electric shock hazard. Contact your sales
or service representative if any of the machine's internal components require maintenance,
adjustment, or repair.
Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock.
Do not place heavy objects on the machine. Doing so can cause the machine to topple over,
possibly resulting in injury.
Some of this machine's internal components get very hot. For this reason, take care when
removing misfed and performing maintenance on the machine. Not doing so could result in
burns.
While safety measures have been installed to prevent accidents, you must not touch the
machine's rollers while it is operating. Doing so could cause injury.
3
Keep ink, flushing liquid, and displacement liquid away from an open flame. Also keep the
room well ventilated when you use or handle ink, flushing liquid, and displacement liquid.
If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes immediately
with running water. Consult a doctor if necessary.
If ink, flushing liquid, or displacement liquid are ingested, consult a doctor immediately with
Safety Data Sheet (SDS).
When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
When removing jammed media, replacing media, or performing maintenance on the machine,
avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink, flushing liquid, and
displacement liquid come into contact with your skin, wash the affected area thoroughly with
soap and water.
1. Getting Started
4
About Operating Environments
Conditions for Installation Locations
Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might
occur.
Do not place the machine on an unstable or tilted surface. If it topples over, an injury might
occur.
Make sure the room where you are using the machine is well ventilated and spacious. Good
ventilation is especially important when the machine is used heavily.
Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
The following is the recommended range for the operating environment:
Temperature: 15–30°C (59–86°F) (Recommended range: 20–25°C (68–77°F))
Humidity: 35–80% (Recommended range: 40–60%)
Altitude: 2,000 m (approx. 6,561.7 ft.) or less
Place the machine on a level surface. The machine must be level within 5 mm (approx. 0.2 inches): both
front to rear and left to right.
Place the machine in a stable place where the floor is strong enough to withstand a load of 1,800
N/m
2
or more.
If the machine is placed somewhere where the conditions are different from those recommended, a
failure may occur. Avoid the following environments when locating the machine:
Low temperature and humidity or high temperature and humidity
Places exposed to direct sunlight
Places close to heaters, air conditioners, or humidifiers
Places subject to frequent strong vibration
Places with poor ventilation
Dusty areas
Places close to an oil heater or machine generating ammonia, such as a diazo copy machine
Precautions for users of ultrasonic-type humidifiers
Do not use an ultrasonic-type humidifier near this product.
About Operating Environments
5
Chlorine or mineral components atomized by an ultrasonic-type humidifier may adhere to the
electronic components inside the product, causing it to malfunction.
1. Getting Started
6
2. Daily Care and Maintenance
This chapter describes how to care and maintain the machine.
About the Frequency of Maintenance
Some parts of this machine must be replaced with a new one periodically by service personnel.
Be sure to make a contract with your distributor or dealer for after sale service to ensure a long
life of your machine.
If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can
result from heavy accumulation of dust inside this machine. Contact your sales or service
representative for details about and charges for cleaning the machine's interior.
When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make sure to
wear the attached goggles.
When performing maintenance on the machine, make sure to wear the attached gloves.
Please use protective equipment in order to avoid exposure to liquid.
The supplied gloves are consumables. If they are damaged or lost, use polythene gloves
instead.
Perform maintenance regularly in order to use the machine at its best possible condition. Make sure to
keep the nozzle parts of the print heads that discharge ink in good condition as they may affect the
printing results due to the adherence of particles or dust.
Maintenance frequency Maintenance item Reference
Regular
Maintenance
Before the start of daily work
Maintenance of white ink page 10
Cleaning the media guides page 12
Once every 1.5 months Cleaning the waste ink line page 14
When replacing the cleaning
cartridge
Cleaning the caps
page 17
Once a year
Cleaning the area around
the print heads
page 21
7
Maintenance frequency Maintenance item Reference
Maintenance
When
Needed
When printed media becomes
dirty
Cleaning the exterior page 26
Cleaning the pre-heater page 27
Cleaning the platen page 28
Cleaning the pinch rollers page 29
When media cannot be
detected
Cleaning the media sensors
page 30
When nozzle clogging cannot
be resolved
Cleaning the nozzle surface of
the print heads
page 31
When replacing consumables
Replacing an ink cartridge page 36
Replacing a cleaning cartridge page 39
Replacing a flushing cartridge page 42
Replacing a waste ink bottle page 44
Tools required for maintenance
Be sure to wear the included protective glasses and protective gloves, or the equivalent tools.
The following items are disposable: waste cloth (paper towel), non-woven fabric, protective
gloves, and cleaning stick. Be sure to use new ones instead of reusing them.
When cleaning the caps and the area around the print heads, use a cleaning stick. If you use a
regular cotton swab, fluff may be left on the said areas and cause a secondary malfunction.
Waste cloth (paper towel)/Non-woven fabric
Used to clean the exterior of the machine and the nozzle faces of the print heads. Do not use it
to clean the caps or the area around the print heads.
Cleaning stick
Used to clean the caps and the area around the print heads. Be sure to use it for cleaning
confined areas such as gaps or uneven surfaces.
Cleaning liquid bottle
Use when removing dirt that is hard to remove or cured ink.
Dropper
Use when filling the caps of the print heads with cleaning liquid. Suck up the cleaning liquid
from the cleaning liquid bottle before using.
Protective gloves
2. Daily Care and Maintenance
8
Protective glasses
You can purchase additional consumables required for maintenance. For details, see page 60
"List of Consumables".
About the Frequency of Maintenance
9
Daily Maintenance
This section describes how to shake the white ink cartridge and clean the media guide. Perform
maintenance before daily work so the machine may be used safely for an extended period.
Shaking a White Ink Cartridge
As the components of white ink deposit easily, pull out the white ink cartridge, and then shake it before
daily work.
Shake the white ink cartridge when the following message appears on the display:
"White ink has settled. Please shake the white ink cartridge."
Do not touch or stain the contacts of the ink cartridges, flushing cartridges, displacement liquid
cartridges, and cleaning cartridge, as doing so may cause damage to the print circuit board.
If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes immediately
with running water. Consult a doctor if necessary.
If ink, flushing liquid, or displacement liquid are ingested, consult a doctor immediately with
Safety Data Sheet (SDS).
Please use protective equipment in order to avoid exposure to liquid.
When performing maintenance on the machine, make sure to wear the attached gloves.
When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
When removing jammed media, replacing media, or performing maintenance on the machine,
avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink, flushing liquid, and
displacement liquid come into contact with your skin, wash the affected area thoroughly with
soap and water.
The supplied gloves are consumables. If they are damaged or lost, use polythene gloves
instead.
2. Daily Care and Maintenance
10
1. Slide down the lock lever to unlock the white ink cartridge.
DWT172
2. Pull out the white ink cartridge.
DWT173
3. With the connecting parts of the white ink cartridge facing upwards, hold a dry cloth on
the ink supply port and lightly shake the cartridge up and down.
Do not shake the ink cartridge strongly. Doing so might cause the white ink to leak.
Do not touch the IC chip on of the ink cartridge.
DWT317
Daily Maintenance
11
4. Fully insert the white ink cartridge into the holder until it stops.
DWT174
5. Slide up the lock lever to lock the white ink cartridge.
Wait until the ink indicator turns off and the message disappears.
DWT175
Cleaning the Media Guides
If dust or ink is present on the media guides, problems such as ink drip, nozzle clogging, media
jamming, media misfeeding or printing defects due to the dust on the nozzle may occur. Check the
media guides before use and clean them if stained.
1. Open the center cover.
DWT134
2. Daily Care and Maintenance
12
2. Wipe off dirt on the media guides.
Wipe the media guides with a soft, dry cloth. If this does not remove the dirt, wipe the media guides
with a damp and tightly wrung cloth. If a damp cloth still does not remove the dirt, try using a mild
detergent. Wipe the media guides with a dry cloth to remove the moisture, after using a damp
cloth.
DWT311
1
1. Media guide
3. Close the center cover.
Daily Maintenance
13
Performing Maintenance Once Every 1.5
Months
This section describes how to clean the waste ink line.
Perform regular maintenance once every 1.5 months in order to use the machine safely for a long time.
Cleaning the Waste Ink Line
Use flushing liquid to clean inside the waste ink line.
Clean the waste ink line regularly once every 1.5 months.
Be sure to clean the waste ink line after replacing the cleaning cartridge or when the following message
appears on the display:
"The waste ink line maintenance is required. Execute the waste ink line maintenance."
When cleaning the ink-station or the heads, or replacing the cleaning cartridge, make sure to
wear the attached goggles.
When performing maintenance on the machine, make sure to wear the attached gloves.
If ink, flushing liquid, and displacement liquid get into contact with eyes, wash eyes immediately
with running water. Consult a doctor if necessary.
If ink, flushing liquid, or displacement liquid are ingested, consult a doctor immediately with
Safety Data Sheet (SDS).
When removing jammed media or performing maintenance on the machine, avoid getting ink,
flushing liquid, and displacement liquid on your clothing. If ink, flushing liquid, and displacement
liquid come into contact with your clothing, wash the stained area with water.
When removing jammed media, replacing media, or performing maintenance on the machine,
avoid getting ink, flushing liquid, and displacement liquid on your skin. If ink, flushing liquid, and
displacement liquid come into contact with your skin, wash the affected area thoroughly with
soap and water.
The supplied gloves are consumables. If they are damaged or lost, use polythene gloves
instead.
2. Daily Care and Maintenance
14
Do not place any object on the platen as the carriage moves there.
When the carriage moves, it may make contact with media. Check that the media is not deformed
or that there is no floating media.
Make sure there is enough space in the waste ink bottle before cleaning the waste ink line.
When 10 minutes or more have passed after the carriage moves, the machine will make a buzzer
sound. As nozzle dryness may cause a nozzle defect, perform nozzle maintenance promptly.
1. Press the [Maintenance] key.
DWU102
2. Press [ ].
3. Press [Special Maintenance].
4. Press [Waste Ink Line Maintenance].
5. Press [Execute].
The carriage moves to the left side edge position and a completion of movement message is
displayed.
6. Check the message on the control panel, and then open the right cover.
DWT183
7. Fill all caps with the dedicated cleaning liquid.
Suck up the cleaning liquid with the dropper, and then fill up the caps with cleaning liquid.
Performing Maintenance Once Every 1.5 Months
15
DWT184
8. Raise the lock lever located inside of the right cover on the left, and then close the right
cover.
9. Press [Confirm].
The carriage moves to the home position, and then perform waste ink line maintenance.
10. Press [Confirm].
2. Daily Care and Maintenance
16
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132

Ricoh Pro L5130 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Ce manuel convient également à

dans d''autres langues