Sony SBH54 Manuel utilisateur

Catégorie
Écouteurs
Taper
Manuel utilisateur
User guide
Stereo Bluetooth
®
Headset
SBH54
Contents
Introduction....................................................................................3
Function overview..............................................................................3
Hardware overview............................................................................3
Status icon overview..........................................................................4
Basics.............................................................................................6
Charging............................................................................................ 6
Turning on and off..............................................................................6
Turning on the display....................................................................... 6
Adjusting the volume......................................................................... 6
Menu options.....................................................................................6
Wearing instruction............................................................................7
Getting started............................................................................... 8
Preparing to use your SBH54 ...........................................................8
Reconnecting the headset.................................................................8
Resetting the headset........................................................................9
Using your headset......................................................................10
Using the SBH54 ............................................................................ 10
Using your SBH54 to handle phone calls........................................10
Using your SBH54 to play music.....................................................11
Using your SBH54 to view event notifications.................................11
Using Text to speech.......................................................................12
Out-of-range alert notifications........................................................12
Hiding private information................................................................12
Using your SBH54 with two devices simultaneously.......................13
Legal information..........................................................................14
Declaration of Conformity ...............................................................15
2
This is an Internet version of this publication. © Print only for private use.
Introduction
Function overview
Your SBH54 Stereo Bluetooth® Headset is designed to make life more convenient
when you're on the go. You can use it together with an Android™ device such as a
smartphone or tablet, or with a non-Android device that supports Bluetooth®, for
example, a smartphone or a music player. When paired with a compatible device,
you can use your SBH54 to perform some or all of the following actions:
Handle incoming calls, for example, answer or reject an incoming call.
Stream music from a music-playing device.
Make a call directly from the SBH54 call log*.
Display event notifications such as text messages, emails, calendar event reminders,
and updates from social networking services*.
Get event notifications read out loud*.
Perform other basic tasks, for example, indicate the time.
You can also use the SBH54 as a standalone FM radio when it's connected to a set
of wired headphones (which function as an antenna).
* For these functions to work, you must use an Android™ device that supports the
relevant functions, for example, call handling and messaging. Also, you must have
the SBH54 application installed on the Android™ device.
Hardware overview
1
Power key Press and hold down to turn the headset on or off.
When the headset is turned off, press for 15 seconds to
reset it.
2
NFC detection
area
Touch other devices to this area during NFC transactions.
3
Microphone
4
Volume key Press up or down to adjust the volume.
5
Micro USB port Insert the cable for charging the battery.
6
Microphone
7
Display screen
8
Speaker
3
This is an Internet version of this publication. © Print only for private use.
9
Headset jack 3.5 mm input for wired headphones.
10
Call key Press to:
Answer or end incoming calls.
View new event notifications.
Press and hold down to:
Reject incoming calls.
Open the call log.
Initiate Voice search.
11
Next key Press to go:
To the next call log.
To the next menu item.
To the next track.
To the next saved channel.
Up the FM frequency band in increments of 0.1 MHz.
Press and hold down to:
Move up the frequency band to search for a radio
channel.
12
Music key/Action
key
Press to:
Play or pause the current track.
Play or pause the FM radio.
Select menu items.
View new event notifications.
Press and hold down to:
Mute the microphone during a call.
Switch between FM Channel mode and FM Search
mode.
13
Previous key Press to go:
To the previous call log.
To the previous menu item.
To the previous track.
To the previous saved channel.
Down the FM frequency band in increments of 0.1 MHz.
Press and hold down to:
Move down the frequency band to search for a channel.
14
Back key/Menu
key
Press to:
Open or close the menu.
Go back one step.
Status icon overview
Battery charge level
The battery is charging
Incoming call
Outgoing call
Ongoing call
Volume level indicator
The microphone is muted
4
This is an Internet version of this publication. © Print only for private use.
Ear speaker mode is activated
5
This is an Internet version of this publication. © Print only for private use.
Basics
Charging
Before using the SBH54 Stereo Bluetooth® Headset for the first time, charge it for
approximately 1 hour using an official Sony charger.
To charge the SBH54
1
Plug one end of the USB charger cable into the charger or into the USB port of
a computer.
2
Plug the other end of the cable into the Micro USB port of your SBH54.
Turning on and off
To turn on the SBH54
Press and hold down until the display is turned on.
To turn off the SBH54
Press and hold down until the display is turned off.
Turning on the display
The display on your SBH54 turns off after a short period of time if you don't use it.
This saves power and protects your personal information.
To activate the display
Press any key on your SBH54.
Adjusting the volume
To change the call or music volume
During a call, or when listening to music, press
or .
Menu options
The following menu options are available on your SBH54:
Edit settings
View new events
Play music from a compatible device
View the call log
6
This is an Internet version of this publication. © Print only for private use.
Play the FM radio
The new events icon and the call log icon only appear when your headset is paired and
connected to an Android™ device on which the SBH54 application is installed.
To open the menu
Press any key to turn on the SBH54 display, then press
.
To navigate the menu
1
After you open the headset menu, press or to navigate the different
menu options.
2
Press to open the selected menu option, or press to go back one step.
Wearing instruction
To get the best performance from the SBH54 when using it outdoors, it is
recommended that you carry your phone on the same side of your body as the
SBH54 device.
A set of wired headphones that support the CTIA standard comes with the SBH54 at
purchase. You can use other headphones but they may not work properly with your SBH54
device.
7
This is an Internet version of this publication. © Print only for private use.
Getting started
Preparing to use your SBH54
You can set up your Stereo Bluetooth® Headset using NFC, which launches the
pairing, connection and setup procedures automatically, or you can use the manual
Bluetooth® option to set up the device manually.
For your SBH54 to work properly, make sure the SBH54 application is installed on
your Android™ device.
To set up your SBH54 using NFC
1
Make sure that your SBH54 is fully charged.
2
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
3
Place the Android™ device over your SBH54 so that the NFC detection area of
each device touches the other, then follow the instructions on the Android™
device to install the SBH54 application.
You can set up your SBH54 using NFC even when it is turned off. The SBH54 gets turned on
when the NFC detection area is touched by another NFC device. If you have problems pairing
your SBH54 with an Android™ device using NFC, try to connect manually using Bluetooth®.
To set up your SBH54 using Bluetooth®
1
Make sure that your SBH54 is fully charged.
2
Android™ device: Make sure the Bluetooth® function is turned on.
3
Turn off your headset.
4
Headset: Press and hold down
until the Bluetooth® icon appears.
5
Android™ device: Scan for Bluetooth® devices, then select SBH54 in the list of
available devices.
6
Android™ device: Follow the pairing instructions that appear on the screen.
Reconnecting the headset
In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your headset automatically performs a series of
reconnection attempts. When this happens, you can use any key to force the
accessory to try reconnecting, or you can use NFC to reconnect the two devices.
To force the headset to try reconnecting
1
Android™ device: Make sure that the Bluetooth® function is turned on.
2
Press any key on the headset.
To reconnect your headset using NFC
1
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Android™ device over your headset so that the NFC detection area
of each device touches the other.
8
This is an Internet version of this publication. © Print only for private use.
Resetting the headset
Reset your SBH54 if it behaves unexpectedly. All information about paired devices
gets deleted when you reset the SBH54.
To reset the SBH54
1
Press
to open the menu.
2
Press
or to select , then press .
3
Press or to select , then press .
4
Press or to select , then press .
To reset, you can also press and hold down for 15 seconds when the SBH54 is turned off.
9
This is an Internet version of this publication. © Print only for private use.
Using your headset
Using the SBH54
You can view and change settings for your headset by using the SBH54 on your
Android™ device. A setup wizard in the SBH54 guides you through the process of
setting up your headset for the first time.
To set your headset to vibrate when ringing
1
From the main application screen of your Android™ device, find and tap
SBH54 >
> Settings.
2
Tap Vibrations, then drag the slider beside Off to the on position.
Using your SBH54 to handle phone calls
Use your SBH54 to handle incoming calls, for example, to answer or reject a call. The
phone number of the caller is shown on the headset display. If you are using the
headset with an Android™ device, the name of the caller is also displayed when the
caller is saved as a contact on the Android™ device. When the wired headphones are
not connected to the headset, you can use the ear speaker on the SBH54 device to
answer calls. You can also use the headset call log to make calls.
For your safety, do not use the SBH54 to handle calls with the ear speaker directly when you
are driving.
To turn on the Call log function
1
From the main application screen of your Android™ device, find and tap
SBH54 > > Settings.
2
Tap Call log, then drag the slider beside Off to the on position.
To answer a call
When you hear an incoming call signal, press
.
To make a call from the call log on the SBH54
1
Press any key to turn on the SBH54 display, then press and hold down to
open the call log.
2
Press
or to select the contact or number that you want to call, then
press
to make the call.
To access the call log directly from your SBH54, you must have the SBH54 application
installed on the connected Android™ device.
To end a call
During an ongoing call, press .
To reject a call
When you hear an incoming call signal, press and hold down .
To answer a second call
When you hear an incoming call signal during an ongoing call, press . The
ongoing call is put on hold.
You can also press
or to switch to another call and put the current call on hold.
To reject a second call
When you hear an incoming call signal during an ongoing call, press and hold
down
.
10
This is an Internet version of this publication. © Print only for private use.
To mute the microphone during a call
Press and hold down .
To transfer an ongoing call to your phone
During an ongoing call, press and simultaneously.
You can also press and simultaneously again to transfer the ongoing call back to
your SBH54.
Using your SBH54 to play music
When your SBH54 is connected with your Android™ device, you can play music from
the device using your headset. Or you can listen to the standalone FM radio in the
headset itself. Before you start listening to music, you must select a music source.
To listen to music
1
Open the music player application in your Bluetooth® device and select the
track that you want to listen to.
2
Turn on your SBH54.
3
Press
to open the menu.
4
Press or to select .
5
To play the current track, press .
To move between tracks
Press or .
To fast forward or rewind a music track
Press and hold down or to fast forward or rewind until you reach the
desired position.
To listen to the FM radio
1
Make sure that headphones are connected to your SBH54.
2
Turn on your SBH54.
3
Press
to open the menu.
4
Press
or to select .
5
Press .
To search for a radio channel
While you are listening to the FM radio, press and hold down
or .
To change the radio frequency manually
While you are listening to the FM radio, press or to move up or down
by increments of 100kHz.
To save a radio channel
1
While you are listening to the FM radio, press and hold down and
simultaneously to open the save menu.
2
Press
or to select the desired channel position, then press .
To listen to a saved radio channel
1
While you are listening to the FM radio, press and hold down .
2
Press or to select a saved radio channel.
3
Press and hold down
.
Using your SBH54 to view event notifications
You can receive the following kinds of notifications from a paired Android™ device
on the display of your SBH54:
Text messages.
11
This is an Internet version of this publication. © Print only for private use.
Email.
Calendar event reminders.
Updates from social networking services, such as Facebook™ and Twitter™.
You must first install the relevant text messaging, email, calendar and social networking
applications on your Android™ device in order for the functionality described above to work on
your SBH54.
To turn on the “Get notified” function
1
From the main application screen of your Android™ device, find and tap
SBH54 > > Settings.
2
Tap Get notifications from, then drag the slider beside Off to the on position.
To select which notifications to forward to your SBH54
1
From the main application screen of your Android™ device, find and tap
SBH54 >
> Settings > Get notified.
2
Drag the sliders beside Off and Notifications to the on position.
3
Tap Get notifications from, then select the desired applications.
To view event notifications on your SBH54
When a notification arrives, press
.
Using Text to speech
When notifications arrive on your Android™ device, you can choose to have the
related event information read out loud to you on the SBH54. For example, you can
listen to email or text messages, or calendar reminders. If the event information
contains text, this text is shown on the headset at the same time as it is read aloud.
To use the Text to speech function, you must first turn it on using the SBH54
application.
The Text to speech function does not support all languages. If you want to use a language that
is not one of the default languages, you must download and install a supported speech engine
and a Text to speech voice.
To turn on the Text to speech function
1
From the main application screen of your Android™ device, find and tap
SBH54 > > Settings.
2
Tap Get notified > Text to speech, then select a TTS engine.
Out-of-range alert notifications
You can receive a notification when you leave your Android™ device behind by
turning on the out-of-range alert notification function. Your SBH54 then notifies you
with three short vibrations when the distance between your SBH54 and the
connected Android™ device becomes too great and causes a disconnection. This
function is turned off by default.
To turn on the Out-of-range alert notification function
1
From the main application screen of your Android™ device, find and tap
SBH54 >
> Settings.
2
Tap Get notifications from, then drag the slider beside Out-of-range alert to the
on position.
Hiding private information
You can hide the name and number for incoming or outgoing calls and the
notification details of incoming events on your SBH54 by turning on the Privacy
function. When this function is activated, the headset display only shows an icon for
incoming or outgoing calls and event notifications.
12
This is an Internet version of this publication. © Print only for private use.
To turn on the Privacy function
1
From the main application screen of your Android™ device, find and tap
SBH54 > > Settings.
2
Tap Privacy, then drag the sliders beside Off to the on position.
Using your SBH54 with two devices simultaneously
Your SBH54 has two different connection modes: Multipoint mode and Singlepoint
mode. Multipoint mode helps you manage two connections at the same time, for
example, it lets you handle calls from one device and play music from another. You
must switch to Multipoint mode manually after you pair your headset with a second
device successfully. If you stop using one of the two devices, you should switch
manually to Singlepoint mode.
Your SBH54 remembers both paired devices. You can reconnect previously paired
devices easily by switching back to Multipoint mode from Singlepoint mode. A
previously paired device can then be detected automatically.
If your SBH54 is paired with two Android™ devices, you must select one of them as
the primary device for viewing event notifications and handling calls on the headset.
You can only connect to a maximum of two devices in Multipoint mode. If you pair the SBH54
with a third device, the first paired device gets removed from the memory of the headset.
To set up your SBH54 with a second device using NFC
After setting up the first device with your SBH54, repeat the same instruction
steps that describe how to set up your headset with another device.
To set up your SBH54 with a second device using Bluetooth®
After setting up the first device with your SBH54, repeat the same instruction
steps that describe how to set up your headset with another device.
To select a device as the primary device
1
Press
to open the menu.
2
Press
or to select , then press .
3
Press or to select , then press .
4
Press
or to highlight the icon representing the device that you want
to set as the primary device, then press .
You can also tap
Select connection type to select a device as the primary device in the SBH54
application.
13
This is an Internet version of this publication. © Print only for private use.
Legal information
Sony SBH54
Prior to use, please read the
Important information
leaflet separately provided.
This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment, may be made by Sony Mobile
Communications Inc. at any time and without notice. Such changes will, however, be incorporated into new
editions of this User guide.
All rights reserved.
©2015 Sony Mobile Communications Inc.
Interoperability and compatibility among Bluetooth® devices varies. Device generally supports products
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of the
Bluetooth (SIG) Inc. and is used under license. All other marks are the property of their respective owners. All
rights reserved.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of
their respective owners.
Visit
www.sonymobile.com
for more information.
All illustrations are for illustration only and may not accurately depict the actual accessory.
14
This is an Internet version of this publication. © Print only for private use.
Declaration of Conformity
We, Sony Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden,
declare under our sole responsibility that our product
Sony type AC-0060–EU and AC-0060–UK
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards
Spectrum EMC Safety
EN 300 328:V1.8.1 EN 301 489-3:V1.6.1 EN 60950-1:2006
+A11:2009+A1:2010+A12:2011+A2:2013
EN 302 291-2:V1.1.1 EN 301 489-7:V1.3.1
EN 301 489-17:V2.2.1
following the provisions of, Radio Equipment and Telecommunication Terminal
Equipment directive 1999/5/EC.
Lund, July 2015
Fredrik Björk
Head of Product Compliance Lund
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Statement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
15
This is an Internet version of this publication. © Print only for private use.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à
l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux. Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et
5470-5725 MHz doit se conformer à la limite de p.i.r.e. Le gain maximal d’antenne permis (pour les dispositifs
utilisant la bande 5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à
point et non point à point, selon le cas. De plus, les utilisateurs devraient aussi être avisés que les utilisateurs
de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les
bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des
dommages aux dispositifs LAN-EL.
16
This is an Internet version of this publication. © Print only for private use.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Sony SBH54 Manuel utilisateur

Catégorie
Écouteurs
Taper
Manuel utilisateur

dans d''autres langues