Nomad Goods NM01174585 Base One Max Manuel utilisateur

NM01174585 Base One Max
Marque
Nomad Goods
Modèle
NM01174585 Base One Max
Taper
Manuel utilisateur
Base One Max with MagSafe
User manual
1 Name : Base One Max| with MagSafe | Carbide SKU: NM01151685 UPC: 856500011516
Base One Max | with MagSafe | White SKU: NM01174585 UPC: 856500011745
Base One Max | with MagSafe | Gold SKU: NM01175285 UPC: 856500011752
2 include：Dock X 1, Cable X 1；
3 Appearance and specifications：
3.1 Product appearance picture：
3.2 Specifications：
3.2.1 Size：189*90*47mm (Dock)
3.2.2 Weight：950g (Cable not included)
3.2.3 Input receptor：USB C
3.2.4 Input requirement: PD 30W (12V/2.5A,15V/2A OR 20V 1.5A) or above.
3.2.5 Output1: 15W(Max with iPhone12/iPhone13).
3.2.6 Output2：2.5W(Max with watch series)
4 Operation instructions：
4.1.1 Insert one USB-C plug of the USB C To C Cable into the USB-C receptacle of the charger.
4.1.2 Insert the other USB-C plug of the USB C To C Cable into the PD 30W+ adapter。
4.1.3 Plug the PD ADAPTOR into an AC socket。
4.1.4 Place a Phone with MagSafe wireless charging feature on the wireless charger and align
the phone center with the MagSafe module center of the charger. The phone will be sucked
in by the MagSafe module of the charger and then charged.
4.1.5 Place a watch with Watch Charge Moudul center of the charge.The watch will be sucked
in by the module of the charger and then charged.
5 Environment Requirements
a. Operation temperature and relative Humidity:-5℃ to +25℃;10%RH to 85%RH。
b. Storage temperature and relative Humidity：-20℃ to +40℃;5%RH to 95%RH。
6 Notice:
6.1 A PD adapter of no less than 30W is required for charging, otherwise the charger will not work
properly.
6.2 For indoor and dry conditions use only, away from damp or damp location.
6.2 Away from any liquid or damp environment.
6.3 Avoid any fire and shocks.
6.4 Unplug the USB-C cable if you don’t use for a long time.
6.3 Please do not disassemble this product without professional help.
7 Manufacturer.
Nomad Goods, Inc.
1187 Coast Village Rd. #638 Suite 1 Santa Barbara, CA 93108, United State
FCC WARING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation expo-sure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF) Exposure Guidelines. When using the
product, keep a distance of at least 15cm from the product.
RSS Statement (Canada)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation.
Science and Economic Development Cana:la·s licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference. including interference that may cause undesired
operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum
distance 10cm between the radiator and your body.
IC: 27646- NM01174585
Declaration de conformite avec le CNR (Canada’s)
Cet appareil est conforme au Cahier des charges sur les normes radioelectriques (CNR) pour
les appareils utilisables sans licence d'lndustrie Canada. L'utilisation de ce produit est soumise
aux oeux
conditions suivantes
(1) cet appareil ne doit pas entrainer d'interferences; et
(2) cet appareil doit accepter toute interference. y compris tes interferences pouvant causer un
fonctionnement non souhae.
l'emetteur/recepteur exempt de tcence contenu dans le present appareil est conforme aux CNR
d'lnnovation. Sciences et Developpement economique Canada applicables aux appareils radio
exempts
cre t,cence. L·expto,tauon est autorisee aux creux concrmons su,vantes :
(1) L'appareil ne doit pas produire de brouillage,
(2) rappareil doit accepter tout brouillage radioetectrique subi, meme si le brouillage est
susceptible
d'en compromettre le fonctionnement.
L’appareil est conforme aux valeurs limites d’exposition au rayonnement fixées pour l’ic rs-
102 pour les environnements non contrôlés.Le dispositif doit être installé et fonctionner à
une distance d’au moins 10 cm entre le radiateur et votre corps.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Nomad Goods NM01174585 Base One Max Manuel utilisateur

NM01174585 Base One Max
Marque
Nomad Goods
Modèle
NM01174585 Base One Max
Taper
Manuel utilisateur
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents