VTech CS6419-2 Manuel utilisateur

User’s manual

w w w.v te c h ph o ne s. c om

Models:

CS6419/CS6419-15/

CS6419-16/CS6419-17/

CS6419-2 BC

Congratulations

on purchasing your new VTech product. Before using this telephone, please read

Important safety instructions on page 45 of this manual.

This manual has all the feature operations and troubleshooting necessary

to install and operate your new VTech telephone. Please review this manual

thoroughly to ensure proper installation and operation of this innovative and

feature rich VTech product. For support, shopping, and everything new at

VTech, visit our website at www.vtechphones.com. In Canada, please visit

www.vtechcanada.com.

Telephones identified with this logo have reduced noise and interference

when used with most T-coil equipped hearing aids and cochlear

implants.

The TIA-1083 Compliant Logo is a trademark of the Telecommunications

Industry Association. Used under license.

T

Compatible with

Hearing Aid T-Coil

TIA-1083

Register online to get an additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product online for enhanced

warranty support.

Product news

Learn about the latest VTech products.

i

Table of contents

Getting started ................................1

Parts checklist ..................................1

Telephone base and charger

installation .....................................2

Battery installation ............................3

Battery charging ...............................4

Installation options ...........................5

Telephone base layout ....................7

Handset layout ................................8

Telephone settings .......................10

Using the menu ..............................10

Ringer volume ................................10

Ringer tone ..................................... 11

LCD language ................................ 11

Clear voicemail indicators ..............12

Key tone .........................................12

Set date and time ...........................13

Home area code .............................14

Dial mode .......................................14

Telephone operation ....................15

Make a call .....................................15

Predial a call ...................................15

Answer a call ..................................15

End a call ........................................15

Speakerphone ................................15

Volume ...........................................15

Mute ...............................................16

Call waiting .....................................16

Temporary ringer silencing .............16

Temporary tone dialing ...................16

Redial list ........................................17

Review and dial a redial entry ........17

Store a number from the redial

list to the directory .......................17

Delete a redial entry .......................17

Chain dialing ...................................18

Join a call in progress ....................19

Find handset...................................19

Intercom .........................................20

Answer an incoming call during

an intercom call ...........................21

Call transfer using intercom ...........21

Directory ........................................23

About the directory .........................23

Create a new directory entry ..........24

Review the directory .......................26

Alphabetical search ........................26

Dial a directory entry ......................26

Edit a directory entry ......................26

Delete a directory entry ..................26

Speed dial ......................................27

Store a speed dial entry .................27

Dial a speed dial number ...............28

Delete a speed dial entry ...............28

Caller ID .........................................29

About caller ID ................................29

Information about caller ID with

call waiting ..................................29

Call log ...........................................30

Missed call indicator .......................31

Memory match................................31

Review and dial from the call log ...31

View dialing options........................32

Save a call Iog entry to the

directory ......................................32

Delete from the call log ..................33

Call log display screen

messages....................................33

ii

Appendix .......................................34

Handset display

screen messages .......................34

Handset and telephone base

indicators .....................................36

Expand your telephone system ......37

Troubleshooting ..............................38

Important safety instructions ..........45

Operating range .............................47

Maintenance ...................................47

The RBRC® seal .............................48

FCC, ACTA and IC regulations ......49

California Energy Commission

battery charging testing

instructions ..................................51

For C-UL compliance only ..............52

Limited warranty .............................55

Technical specifications ..................57

Index ..............................................58

Table of contents

1

Parts checklist

Your telephone package contains the following items. Save your sales receipt and

original packaging in case it is necessary to ship your telephone for warranty service.

Telephone line cord

Telephone baseHandset

(1 for CS6419/CS6419-15/

CS6419-16/CS6419-17;

2 for CS6419-2)

User’s manualWall mount bracket

Getting started

Charger and charger adapter

(1 for CS6419-2)

Battery

(1 for CS6419/

CS6419-15/

CS6419-16/

CS6419-17;

2 for CS6419-2)

Telephone base

power adapter

Battery compartment

cover

(1 for CS6419/CS6419-15/

CS6419-16/CS6419-17;

2 for CS6419-2)

To purchase replacement batteries or power adapters, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call 1 (800) 267-7377.

2

Getting started

Telephone base and charger installation

Install the telephone base and charger(s) as shown below.

If you subscribe to digital subscriber line (DSL) high-speed Internet service

through your telephone line, you must install a DSL filter between the telephone

line cord and the telephone wall jack. Contact your DSL service provider for more

information about DSL filters.

The telephone base comes ready for tabletop use. If you want to mount your

telephone on a wall, refer to Tabletop to wall mount installation on page 5

for details.

ChargerTelephone base

Charger adapter

Electrical outlet

not controlled by

a wall switch

Telephone line cord

If you have DSL high

speed Internet service,

a DSL filter (not

included) is required.

Telephone

wall jack

Telephone base

power adapter

Electrical outlet

not controlled by

a wall switch

Use only the power adapters supplied with this product. To order a

replacement, visit our website at www.vtechphones.com or call

1 (800) 595-9511. In Canada, go to www.vtechcanada.com or dial

1 (800) 267-7377.

The power adapters are intended to be correctly oriented in a vertical or floor

mount position. The prongs are not designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or cabinet outlet.

•

3

Getting started

Battery installation

Install the battery as shown below.

Plug the battery connector securely into the socket inside the handset

battery compartment.

Place the battery with the label THIS SIDE UP facing up and the wires inside

the battery compartment.

Align the cover flat against the battery compartment, then slide it towards the

center of the handset until it clicks into place.

Charge the handset by placing it in the telephone base or charger. The

CHARGE light is on when the handset is charging.

1.

2.

3.

4.

If the handset will not be used for a long time, disconnect and remove the

battery to prevent possible leakage.

To purchase replacement batteries, visit our website at

www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or dial 1 (800) 267-7377.

•

1

CHARGE light

remains on when

charging.

2

34

4

Getting started

Battery charging

Once you have installed the battery, the screen indicates the battery status (see

the table below).

For best performance, keep the handset in the telephone base or charger when

not in use.

The battery is fully charged after 10 hours of continuous charging.

If you place the handset in the telephone base or the charger without plugging

in the battery, the screen displays NO BATTERY.

•

Battery indicators Battery status Action

The screen is blank,

or displays PLACE IN

CHARGER and flashes.

Battery has no or

very little charge. The

handset cannot be used.

Charge without interruption

(about 30 minutes).

The screen displays

LOW BATTERY and

flashes.

Battery has enough

charge to be used for a

short time.

Charge without interruption

(about 30 minutes).

The screen displays

HANDSET X.Battery is charged. To keep the battery charged,

place it in the telephone base

or charger when not in use.

When the battery is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Up to seven hours

While in speakerphone mode (talking*) Up to four hours

While not in use (standby**) Up to five days

*Operating times vary depending on your actual use and the age of the battery.

**Handset is not charging or in use.

After you install your telephone or power returns following

a power outage, the handset will prompt you to set the date

and time. For instructions, see Set date and time on page

13. To skip setting the date and time, press OFF/CANCEL.

SET DATE

--/--/--

5

Getting started

Installation options

The telephone comes ready for tabletop use. If you want to mount your

telephone on a wall, use the provided wall mount bracket to connect with a

standard dual-stud telephone wall mount plate. If you do not have this wall mount

plate, you can purchase one from many hardware or consumer electronics

retailers. You may need a professional to install the wall mount plate.

Tabletop to wall mount installation

Plug one end of the telephone line cord into the TEL LINE jack on the bottom

of the telephone base. Plug the small end of the base power adapter into the

POWER jack on the bottom of the telephone base.

Position the telephone base against the wall mount bracket. Insert the extend

tabs (marked B) of the wall mount bracket into the slots (marked B) on the back

of the telephone base. Push the telephone base down until it clicks securely in

place.

Route the telephone line cord (or DSL filter) through the hole in the middle

of the wall mount bracket and plug it into the telephone wall jack. Route the

power cord out of the bottom of the telephone and plug it into an electrical

outlet not controlled by a wall switch.

Align the holes on the bracket with the standard wall mount plate and slide the

bracket down until it locks securely. Bundle the telephone line cord and power

adapter cord neatly with twist ties.

1.

2.

3.

4.

12

34

Getting started

6

Installation options (continued)

Wall mount to tabletop installation

If the telephone line cord and power adapter cord are bundled, untie

them first.

Slide the black wall mount bracket up and remove it from the wall mount plate.

Unplug the end of the telephone line cord (or DSL filter) from the telephone

wall jack. Unplug the power adapter from the power outlet.

Slide the telephone base up and remove it from the wall mount bracket.

See Telephone base and charger installation on page 2.

1.

2.

3.

4.

Getting started

7

Telephone base layout

IN USE light

On when the handset is

in use.

Flashes quickly when

there is an incoming

call.

Flashes slowly when

another telephone

sharing the same line is

in use.

/FIND HANDSET

Press once and then

release to page all

handsets (page 19).

8

/VOLUME

Press to enter the directory when the telephone is not in

use (page 26).

Press to scroll up while in a menu, or in the directory, call

log or redial list.

During a call, press to increase the listening volume

(page 15).

When entering numbers or names in the directory, press

to move the cursor to the right.

Handset layout

Getting started

(speakerphone)

Press to make or answer a call.

During a call, press to switch between the speakerphone and

the handset (page 15).

CHARGE light

On when the handset is charging in the telephone base

or charger (page 3).

MUTE/DELETE

While on a call, press to mute the microphone (page 16).

While using the dialing keys, press to delete digits

or characters.

While the handset is ringing, press to silence the

ringer temporarily (page 16).

While reviewing the redial list, directory or call log, press to

delete an individual entry (pages 17, 26 and 33 respectively).

/FLASH

Press to make or answer a call (page 15).

During a call, press to answer an incoming call when

you receive a call waiting alert (page 16).

1

While reviewing a call log entry, press repeatedly to add

or remove 1 in front of the call log entry before dialing or

saving it to the directory.

TONE

Press to switch to tone dialing temporarily when using the

pulse service (page 16).

9

Handset layout

Getting started

MENU/SELECT

Press to show the menu.

While in a menu, press to select an item, or save an

entry or setting.

OFF/CANCEL

During a call, press to hang up.

While the handset is ringing, press to silence the ringer

temporarily (page 16).

While the telephone is not in use, press and hold to erase

the missed call indicator (page 31).

While in a menu, press to exit to the previous menu or

press and hold to exit to idle mode.

# (pound key)

Press repeatedly to show other dialing options when

reviewing a call log entry (page 32).

INT (intercom)

Press to start an intercom conversation or transfer a call

(pages 20-22).

REDIAL/PAUSE

Press to review the redial list (page 17).

While dialing or entering numbers into the directory,

press and hold to insert a dialing pause.

CID /VOLUME

Press to review the call log when the telephone

is not in use (page 31).

Press to scroll down while in a menu, or in the directory,

call log or redial list.

During a call, press to decrease the listening volume

(page 15).

When entering numbers or names in the directory, press

to move the cursor to the left.

Dialing keys

Press to enter numbers or characters.

10

Using the menu

In the ringers menu, you can select the ringer tones and adjust the ringer volume

for incoming calls.

In the settings menu, you can change and edit the settings for LCD language,

voicemail indicators, key tone, date and time, home area code and dial mode.

To enter the handset menu:

Press MENU/SELECT when the handset is not in use.

Press or until the screen displays the desired feature menu.

Press MENU/SELECT to enter that menu.

To return to the previous menu, press OFF/CANCEL.

To return to idle mode, press and hold OFF/CANCEL.

Ringer volume

You can adjust the ringer volume or turn the ringer off.

Press MENU/SELECT when the handset is not in use.

Press or to select >RINGERS, then press

MENU/SELECT.

Press or to select >RINGER VOLUME, then press

MENU/SELECT.

Press or to adjust the volume. A sample of each ringer

volume plays as you scroll through the choices.

Press MENU/SELECT to save your selection. You hear a

confirmation tone.

1.

2.

3.

•

1.

2.

3.

4.

5.

The ringer volume also determines the ringer volume of the intercom calls

and the volume of paging tone.

When the handset ringer volume is set to off, that handset is silenced for all

incoming calls except paging tone and displays on the handset.

Unless the ringer volume is turned off on that handset, each handset rings

when there is an incoming call.

•

The ringer volume also determines the ringer volume of the intercom calls

and the volume of paging tone.

When the handset ringer volume is set to off, that handset is silenced for all

incoming calls except paging tone and displays on the handset.

Unless the ringer volume is turned off on that handset, each handset rings

when there is an incoming call.

•

Telephone settings

>RINGERS

SETTINGS

>RINGER VOLUME

RINGER TONE

RINGER VOLUME

11

Ringer tone

You can choose from different ringer tones.

Press MENU/SELECT when the handset is not in use.

Press or to select >RINGERS, then press

MENU/SELECT.

Press or to select >RINGER TONE, then press

MENU/SELECT.

Press or to select a desired ringer tone. A sample of

each ringer tone plays as you scroll through the choices.

Press MENU/SELECT to save your selection. You hear a confirmation tone.

LCD language

You can select a language (English, French or Spanish) to be

used in all

screen displays.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press MENU/SELECT.

Press or to select >LCD LANGUAGE, then press

MENU/SELECT.

Press or to choose ENGLISH, FRANÇAIS or

ESPAÑOL.

Press MENU/SELECT to save your selection. You hear a confirmation tone.

1.

2.

3.

4.

5.

1.

2.

3.

4.

5.

If you turn off the handset ringer volume, you will not hear ringer tone samples.If you turn off the handset ringer volume, you will not hear ringer tone samples.

Telephone settings

>RINGER TONE

RINGER VOLUME

RINGER TONE

>1

>LCD LANGUAGE

CLR VOICEMAIL

LCD LANGUAGE

>ENGLISH

12

Clear voicemail indicators

If you subscribe to voicemail service offered by your telephone service provider,

NEW VOICEMAIL and appear on the handset when you have new voicemail

messages. Contact your telephone service provider for more information about

using your voicemail service.

After you have listened to all new voicemail messages, the indicators on the

handset turn off automatically.

Use this feature when the telephone indicates that there is new voicemail but

there are none (for example, when you have accessed your voicemail while

away from home). This feature only turns off the indicators; it does not delete

your voicemail messages. As long as you have new voicemail messages, your

telephone service provider continues to send the signal to turn on the indicators.

To manually turn off these indicators:

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >CLR VOICEMAIL, then

press MENU/SELECT. The screen shows

TURN OFF INDICATOR?

Press MENU/SELECT to save your selection. You hear a

confirmation tone.

Key tone

You can turn the key tone on or off.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >KEY TONE, then press

MENU/SELECT.

Press or to choose ON or OFF.

Press MENU/SELECT to save your selection. You hear a

confirmation tone.

1.

2.

3.

4.

1.

2.

3.

4.

5.

Your telephone service provider may alert you of new messages with a stutter

(broken) dial tone. Contact your telephone service provider for details.

Your telephone service provider may alert you of new messages with a stutter

(broken) dial tone. Contact your telephone service provider for details.

Telephone settings

>KEY TONE

SET DATE/TIME

KEY TONE

>ON

TURN OFF

INDICATOR?

HANDSET 1

NEW VOICEMAIL

3:15

PM

12/25

13

Telephone settings

Set date and time

If you subscribe to caller ID service, the day, month and time are set

automatically with each incoming call. You can also set the date and

time manually.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >SET DATE/TIME, then press

MENU/SELECT.

When the month is flashing, press or until the screen

displays the correct month. Press MENU/SELECT to

confirm.

-OR-

Press the dialing keys (0-9) to enter the current month (for

example, if the month is March, you must enter 03).

Repeat Step 4 to set the correct date and year and then

press MENU/SELECT to advance to set the time.

Repeat Step 4 until the time is set. Press or to choose AM or PM, or

press 2 for AM or 7 for PM. Press MENU/SELECT to save your selection. You

hear a confirmation tone.

1.

2.

3.

4.

5.

6.

>SET DATE/TIME

HOME AREA CODE

SET DATE

11/20/10

SET TIME

10:30 PM

14

Home area code

If you dial your local calls using only seven digits (area code not required), you

can program your home area code so that when you receive a call within your

local area, the telephone number is automatically stored without the area code in

the call log.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >HOME AREA CODE, then press

MENU/SELECT.

Use the dialing keys to enter the desired home area code.

Press MUTE/DELETE to delete a digit.

Press and hold MUTE/DELETE to delete the entire entry.

Press MENU/SELECT to save the selection. You hear a confirmation tone.

Dial mode

The default dial mode is tone dialing. If you have pulse (rotary) service, you need

to change the dial mode to pulse dialing before using the telephone.

Press MENU/SELECT when the handset is not in use.

Press or to select >SETTINGS, then press

MENU/SELECT.

Press or to select >DIAL MODE, then press

MENU/SELECT.

Press or to choose TONE or PULSE.

Press MENU/SELECT to save your selection. You hear a

confirmation tone.

1.

2.

3.

4.

•

5.

1.

2.

3.

4.

5.

If, in the future, your telephone service provider requires you to dial the area code

when making a local call, or, if you move to a location that requires it, delete the

home area code you have already programmed, following the steps above. After

you have deleted the home area code, _ _ _ will appear in the display.

If, in the future, your telephone service provider requires you to dial the area code

when making a local call, or, if you move to a location that requires it, delete the

home area code you have already programmed, following the steps above. After

you have deleted the home area code, _ _ _ will appear in the display.

Telephone settings

>HOME AREA CODE

DIAL MODE

>DIAL MODE

LCD LANGUAGE

HOME AREA CODE

---

DIAL MODE

>TONE

15

Make a call

Press /FLASH, then wait for a dial tone.

-OR-

Press to use the speakerphone, then wait

for a dial tone.

Use the dialing keys to enter the telephone number.

Predial a call

Use the dialing keys to enter the telephone number (up to 30 digits).

Press and hold REDIAL/PAUSE to insert a dialing pause (a P appears).

Press MUTE/DELETE or OFF/CANCEL to make corrections.

Press /FLASH or to call.

Answer a call

Press /FLASH, or any dialing key (0-9, TONE or #).

End a call

Press OFF/CANCEL or put the handset in the telephone base or charger.

Speakerphone

During a call, press to switch between speakerphone and normal handset use.

When the speakerphone is active, the handset shows SPEAKER and .

Volume

During a call, press /VOLUME or /VOLUME to adjust the listening volume.

When the volume reaches the minimum or maximum setting, you hear two beeps.

1.

2.

1.

•

2.

The screen shows the elapsed time as you talk (in hours, minutes

and seconds).

The screen shows the elapsed time as you talk (in hours, minutes

and seconds).

The handset earpiece volume setting and speakerphone volume setting

are independent.

The handset earpiece volume setting and speakerphone volume setting

are independent.

Telephone operation

16

Mute

The mute function allows you to hear the other party but

the other party cannot hear you.

During a call, press MUTE/DELETE on the handset. The

handset displays MUTED for a few seconds and MUTE

appears until the mute function is turned off.

Press MUTE/DELETE again to resume the conversation.

The handset screen temporarily shows

MICROPHONE ON.

Call waiting

When you subscribe to call waiting service from your telephone service provider,

you hear an alert tone if there is an incoming call while you are on another call.

Press /FLASH to put the current call on hold and take the new call.

Press /FLASH at any time to switch back and forth between calls.

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the

handset without disconnecting the call. The next call rings normally at the

preset volume.

To silence the ringer:

When the telephone is ringing, press OFF/CANCEL or MUTE/DELETE on the

handset, RINGER MUTED and show on the screen.

Temporary tone dialing

If you have dial pulse (rotary) dialing service only, you can temporarily switch

from dial pulse to touch-tone dialing during a call.

During a call, press TONE .

Use the dialing keys to enter the number. The telephone sends

touch-tone signals.

The telephone automatically returns to pulse dialing mode after you end

the call.

1.

2.

•

1.

2.

3.

MUTED

3:15

PMMUTE

12/25

Telephone operation

La page charge ...

VTech CS6419-2 Manuel utilisateur

Ce manuel convient également à

VTech CS6419-2 Manuel utilisateur

dans d''autres langues

Documents connexes