VADDIO DocCAM 20 HDBT Using Instruction

VADDIO
Marque
VADDIO
Modèle
DocCAM 20 HDBT
Taper
Using Instruction
Using the Document Camera
This document provides instructions for controlling the Vaddio DocCAM 20 HDBT ceiling-mounted document
camera using the IR remote.
You may use this material in your organization's in-room guides for operating conferencing and presentation
equipment.
Features of Interest During Operation
n Camera lens – 20x optical zoom lens for crisp detail.
n Laser pointer – Shows where the camera image is centered. Use the remote to turn on the laser
pointer.
Caution | Avertissement
Laser light – Avoid direct eye exposure. Do not look at the laser aperture during camera
operation.
Lumière de laser – Ne regardez pas directement dans le faisceau laser. Ne regardez pas
directement dans l'ouverture laser lorsque la caméra est en marche.
n IR window – Sensors in the camera face receive signals from the remote. Point the remote toward the
camera; precision is not necessary.
n Status light – The multicolored LED indicates the camera's current state.
Caution | Avertissement
Laser controls are available to remote operators using the web interface. Keep your eyes out of the
beam path.
Les commandes laser sont disponibles aux opérateurs à distance utilisant l'interface Web. Gardez les
yeux hors du trajet du faisceau.
Status Light
The light in the camera's face indicates its current state.
Note
By default, the camera's status light is active during normal operation; however, it can be configured
to remain off when the camera is powered up. The camera may be sending video even if the indicator
light is off.
n Blue: Normal operation (blinks off momentarily when the camera receives a command from the
remote)
n Purple: In standby mode or booting
n Yellow: Firmware update in progress – overrides status light configuration
Camera assembly numbers 998-9968-001 and 998-9968-100:
Note
This product contains a Class 1, 650 nm red laser pointer.
Cet appareil contient un pointeur laser de la Classe 1, à lumière rouge de 650 nm.
Camera assembly number 998-9968-000 only:
Caution
This product contains a Class 3 (5 mw) 650 nm red laser which produces visible laser radiation. Avoid
direct eye exposure. Do not look at the laser aperture during camera operation.
All DocCAM 20 HDBT part numbers:
Caution | Avertissement
Laser light – Avoid direct eye exposure. Do not look at the laser aperture during camera operation.
Lumière de laser – Ne regardez pas directement dans le faisceau laser. Ne regardez pas directement
dans l'ouverture laser lorsque la caméra est en marche.
Using the IR Remote
The IR remote provides basic camera control for end users.
What do you need to do? Button(s)
Power on or standby Power (green button at top right)
Select the camera to control (if this
remote controls more than one)
Camera Select buttons 1 through 3 (second row of buttons)
Center the camera's subject Laser buttons – The laser pointer is aligned at the factory to
point slightly above the center of the camera's subject.
Move the camera to a zoom preset Position Preset buttons 1 through 6 (bottom two rows)
Focus the camera Auto Focus button (near arrow buttons)
Manual Focus buttons Near and Far (below Zoom Speed
buttons)
Control zoom speed Zoom Speed buttons - Slow T and W, Fast T and W for
telephoto and wide-angle modes (light gray)
Adjust for excess light behind the
camera's subject
Back Light button (top center)
IR Remote Details
The Vaddio remote provides the following functions:
Power – Switch the selected camera on or off.
Power indicator – Lights momentarily when you press a button.
Back Light – Use or turn off Back Light Compensation.
Data Screen – Display the camera’s IP address and MAC address. Press this button
again to dismiss the display.
Camera Select – In multi-camera installations, selects the camera to be controlled.
Home button – Returns the camera to its home zoom level.
Laser On – Toggles the laser pointer on and off.
Laser MOM – Turns on the laser pointer momentarily, and forbids it to go out with
its friends if it doesn't turn off again after 5 seconds.
Camera assembly numbers 998-9968-001 and 998-9968-100:
Note
This product contains a Class 1, 650 nm red laser pointer.
Cet appareil contient un pointeur laser de la Classe 1, à lumière rouge de 650
nm.
Caution | Avertissement
Laser light – Avoid direct eye exposure. Do not look at the laser aperture
during camera operation.
Lumière de laser – Ne regardez pas directement dans le faisceau laser. Ne regardez pas directement
dans l'ouverture laser lorsque la caméra est en marche.
Auto Focus – Switch the camera to Auto-Focus mode.
Zoom Speed – Select Slow or Fast movements for telephoto and wide-angle shots.
n T (slow and fast) – Telephoto
n W (slow and fast) – Wide-angle
Manual Focus – Switch the camera to Manual Focus mode.
Near (-) adjustment – Moves the focus nearer when in manual focus mode.
Far (+) adjustment – Moves the focus farther when in manual focus mode.
Preset – Save the camera’s current zoom level as one of the numbered presets.
Reset – Clear a saved preset.
Position Presets 1 through 6 – Move the camera to a predefined zoom level, or specify the preset to save or
clear.
Storing a Preset Using the Remote
Position the camera. Then hold down the Preset button and press one of the numbered preset buttons.
Clearing a Preset Using the Remote
Press and hold the Reset button while pressing the preset number you want to clear.
Vaddio is a brand of Milestone AV Technologies · www.vaddio.com · Phone 800.572.2011 / +1.763.971.4400 ·
Fax +1.763.971.4464 · Email info@vaddio.com
Visit us at support.vaddio.com for firmware updates, specifications, drawings, manuals, technical support
information, and more. Vaddio and OneLINKare trademarks or registered trademarks of Milestone AV
Technologies. HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Exmor® is a
trademark of Sony Corporation. All other brand names or marks are used for identification purposes and are
trademarks of their respective owners. In British Columbia, Milestone AV Technologies ULC carries on business
as MAVT Milestone AV Technologies ULC.
©2018 Milestone AV Technologies.
Milestone AV Technologies grants you permission to use this material in your organization's in-room guides for
operating conferencing and presentation equipment. All other rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

VADDIO DocCAM 20 HDBT Using Instruction

VADDIO
Marque
VADDIO
Modèle
DocCAM 20 HDBT
Taper
Using Instruction
Télécharger le PDF
rapport

dans d''autres langues

Documents connexes

Autres documents