Haier HCW3285AES Installation Instructions Manual

Marque: Haier

Modèle: HCW3285AES

Taper: Installation Instructions Manual

Ce manuel convient également à

HCW3260AES

30" Single and Double Built-in Oven

Four encastré de 30" Single and Double

Horno empotrado de 30" Single and Double

Installation Instructions

Instructions d’installation

Instrucciones de instalación

HCW3260AES

HCW3285AES

IMPORTANT: Save for local electrical inspector’s use.

IMPORTANT : Conserver pour consultation par l’inspecteur local des installations

électriques.

IMPORTANTE: Guárdelo para uso del inspector eléctrico local.

Part # 0570000853 REV A

TABLE OF CONTENTS

OVEN SAFETY .................................................................................................... 1

INSTALLATION REQUIREMENTS ......................................................................... 2

Tools and Parts ............................................................................................................... 2

Location Requirements .................................................................................................3

Opening Dimensions .....................................................................................................5

Electrical Requirements ................................................................................................6

INSTALLATION INSTRUCTIONS .......................................................................... 8

Step 1 - Unpack the Oven .............................................................................................8

Step 2 - Remove the Oven Door ...................................................................................9

Step 3 - Install Oven ....................................................................................................10

Step 4 - Make Electrical Connection .......................................................................... 11

Step 5 - Mount the Oven ............................................................................................. 14

Step 6 - Replace the Door ...........................................................................................14

Step 7 - Complete Installation ....................................................................................15

OVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and

on your appliance. Always read and obey all safety messages.

DANGER

WARNING

CAUTION

This is the safety alert symbol.

This symbol alerts you to potential hazards that can

kill or hurt you and others. All safety messages will

follow the safety alert symbol and either the word

“DANGER,” “WARNING” or “CAUTION.”

These words mean:

An imminently hazardous situation. You

could be killed or seriously injured if you

don’t immediately follow instructions.

A potentially hazardous situation

which, if not avoided, could result in

death or serious bodily injury.

A potentially hazardous situation

which, if not avoided, may result in

moderate or minor injury.

All safety messages will tell you what the potential hazard is, tell you

how to reduce the chance of injury, and tell you what can happen if the

instructions are not followed.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the

State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the

State of California to cause birth defects or other reproductive harm.

INSTALLATION REQUIREMENTS

TOOLS AND PARTS

Gather the required tools before starting installation. Read and follow the

instructions provided with any tools listed here.

ALL INSTALLATIONS

Tools Needed:

•

Measuring Tape

•

Straightedge

•

Pencil

•

Phillips Screwdriver

•

Level

•

Wire Cutters and Wire Stripper

•

Hand or Sabre Saw

•

1" Hole Saw

•

Cordless Drill and Drill Bit

•

Safety Gloves and Goggles

•

Volt Meter (0-250VAC)

Parts Needed:

•

UL Listed Conduit Connector

•

UL Listed Wire Connectors

Parts Provided:

•

#8-14 x 1" Screws - Single Ovens (2),

Double Ovens (4)

TECHNICAL DATA

OVEN DIMENSION MODEL

Electrical Ratings and Maximum

Connected Load

Single Built-in

Oven

30" (76 cm) HCW3260AES

@ 240 Volts

60 Hz

@ 208 Volts

60 Hz

Amperes Watts Amperes Watts

20 4800 17.3 3605

Double Built-in

Oven

30" (76 cm) HCW3285AES 35.4 8500 30.7 6381

LOCATION REQUIREMENTS

IMPORTANT: Observe all governing codes and ordinances.

•

Cabinet opening dimensions that are shown must be used. Given dimensions

provide minimum clearance with oven.

•

Recessed installation area must provide complete enclosure around the

recessed portion of the oven.

•



cabinet cutout.

The oven support surface must be able to support the weight of:

Single Oven: 130 lbs (59 kg) plus 30 lb (14 kg) food load

Double Oven: 230 lbs (105 kg) plus 60 lb (28 kg) food load

•

Grounded electrical supply is required. See “Electrical Requirements” section.

NOTE: For undercounter installation, it is recommended that the junction box be

located in the adjacent right or left cabinet.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet

supplier to make sure that the materials used will not discolor, delaminate or sustain

other damage. This oven has been designed in accordance with the requirements of

UL and CSA International and complies with the maximum allowable wood cabinet

temperatures of 194°F (90°C).

PRODUCT DIMENSIONS

Single Oven Double Oven

Letter Single Oven Dimensions Double Oven Dimensions

 

28½" (72.4 cm) Width (recessed) 28½" (72.4 cm) Width (recessed)

 

23½" (59.7 cm) Depth (recessed) 23½" (59.7 cm) Depth (recessed)

 

OPENING DIMENSIONS

Single Oven - Installed in Cabinet and

InstalledUndercounter

Double Oven -

Installed in Cabinet

Electrical Junction

Box Location

NOTE: Junction

box may be located

in adjacent cabinet

Single Oven

Undercounter

w/o Cooktop

Single Oven in

Cabinet

Double Oven in

Cabinet

Width (cutout)

  

Height (cutout)

27½" (70 cm)  

Depth (cutout)

24" (61.0 cm) 24" (61.0 cm) 24" (61.0 cm)

Top of Cutout to

Bottom of Upper

Cabinet Door

N/A  

Bottom of

Cutout to Floor

(recommended)*

5¼" (13.3 cm)  

Bottom of Cutout to

Top of Cabinet Door

N/A  

Overlap of oven with

sides of cutout

  



ELECTRICAL REQUIREMENTS

If codes permit and a separate ground wire is used, it is recommended that a



gauge is in accordance with local codes.

Do not use an extension cord.

In U.S.A. :

Be sure that the electrical connection and wire size are adequate and in

conformance with the National Electrical Code, ANSI/ NFPA No. 70-latest edition

and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

In Canada:

Be sure that the electrical connection and wire size are adequate and in

conformance with CSA standard C22.1, Canadian Electrical Code, Part 1 - latest

edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

Canadian Standards Association

178 Rexdale Blvd.

Toronto, ON M9W 1R3 CANADA.

WARNING

Electrical Shock Hazard

The electrical power to the oven branch circuit must be shut oﬀ while

line connections are being made.

Do not use an extension cord with this appliance.

Electrical ground is required on this appliance. The free end of the green

wire (the ground wire) must be connected to a suitable ground. This

wire must remain grounded to the oven.

If cold water pipe is interrupted by plastic, non metallic gaskets, union

connections or other insulating materials, DO NOT use for grounding.

DO NOT ground to a gas pipe.

DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in

the NEUTRAL or GROUNDING circuit could result in an electrical shock.

Check with a qualiﬁed electrician if you are in doubt as to whether the

appliance is properly grounded.

Failure to do so could result in death, ﬁre or electric shock.

Electrical Connection

To properly install your oven, you must determine the type of electrical connection

you will be using and follow the instructions provided for it here.

•

Oven must be connected to the proper electrical voltage and frequency as



rating plate is located under the control panel on single ovens and under the

control panel on the upper oven cavity on double ovens. All models are dual

rated, and designed to be connected to either 120/208V or 120/240V AC, 60Hz,

3-wire or 4-wire, single-phase power supply.

Style

Voltage and

Frequency

Amps Circuit Required

Single Oven

240V, 60 Hz 20.0A

25 Amp Circuit

208V, 60 Hz 17.4A

20 Amp Circuit

Double Oven

240V, 60 Hz 35.4A

40 Amp Circuit

208V, 60 Hz 30.7A

35 Amp Circuit

•

Install a suitable conduit box (not furnished). An appropriately sized, UL conduit

connector must be used to correctly attach the conduit to the junction box.

IMPORTANT: Local Codes may vary; installation electrical connections and

grounding must comply with all applicable local codes.

If local codes permit grounding through the electrical supply neutral, connect both

the white neutral wire and the green ground wire from the oven to the white neutral

electrical supply wire.

•



grounded.

•

Single Oven - When a 4-wire, single phase 120/240 volt, 60 Hz., AC only

electrical supply is available, a 25-amp maximum circuit protection is required



120/208 volt 60 Hz., AC only electrical supply is available, a 20-amp maximum

circuit protection is required).

•

Double Oven - When a 4-wire, single phase 120/240 volt, 60 Hz., AC only

electrical supply is available, a 40-amp maximum circuit protection is required

120/208 volt 60 Hz., AC only electrical supply is available, a 35-amp maximum

circuit protection is required).

INSTALLATION INSTRUCTIONS

IMPORTANT: This appliance shall be installed only by authorized persons and



regulations, municipal building codes, electrical wiring regulations, local water

supply regulations.

STEP 1 - UNPACK THE OVEN

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven.

Failure to do so can result in back or other injury.

1. Using two or more people, remove the oven and set it on cardboard to avoid



NOTE: Do not use the handle or any portion of the front frame for lifting.

2. Remove the shipping materials and tape from the oven.

3. Remove the hardware package from inside the bag containing literature.

4. Remove and set aside racks and other parts from inside the oven.

5. Move the oven on the cardboard near where it will be installed.

STEP 2 - REMOVE THE OVEN DOOR

IMPORTANT: The oven door is heavy and fragile, and the door front is glass. To avoid

oven door glass breakage, use both hands, and grasp only the sides of the oven door

to remove.

1. Open the oven door.

2. Locate the door latches in both corners of the oven door, and rotate the latches

forward to the unlocked position.

a Locked

b Unlocked

3. Grasp the edges of the oven door with both hands and push the oven door fully

closed. Lift up and pull oven door toward you to remove. Set the oven door(s)

aside on a covered work surface.

STEP 3 - INSTALL OVEN

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven.

Failure to do so can result in back or other injury.

1. Using two or more people, grasp the ceiling of the oven cavity and lift the oven

onto a table or platform even with the cutout opening.

NOTE: The surface must be able to support the following weight:

•

Single Oven : 160 lb (73 kg)

•

Double Oven: 290 lb (132 kg)

2. 

STEP 4 - MAKE ELECTRICAL CONNECTION

To properly install your oven, you must determine the type of electrical connection

you will be using and follow the instructions provided for it here.

DIRECT WIRE

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Improper connection of aluminum house wiring and copper appliance

leads can result in an electrical hazard or ﬁre. If the home has aluminum

wiring, only use connectors designed and UL listed for joining copper to

aluminum and precisely follow the manufacturer's recommended

procedure. Aluminum-to-Copper connections must conform with local

codes.

For Single Oven, use 10 gauge copper or aluminum wire.

For Double Oven, use 8 gauge copper or aluminum wire.

Electrically ground oven.

Failure to do so can result in death, ﬁre or electrical shock.

Be sure your appliance is properly installed and grounded by a qualied

technician. Ask your dealer to recommend a qualied technician or an authorized

repair service.

This oven is manufactured with a neutral (white) power supply wire and a cabinet-

connected green (or bare) ground wire twisted together.



from the oven to the junction box using a UL listed conduit connector. The

Grounded Neutral and Ungrounded Neutral Graphics on the following pages and the

instructions provided, present the most common way of connecting ovens. Your

local codes and ordinances, of course, take precedence over these instructions.

Complete electrical connections according to local codes and ordinances.

1. Disconnect power.

2. Remove junction box cover.

3. Install a UL listed or CSA approved conduit connector to the junction box.

a UL or CSA Listed Conduit Connector

4. 

through a UL listed or CSA approved conduit connector.

5. Tighten screws on conduit connector.

3-WIRE CONNECTION (GROUNDED NEUTRAL) - U.S.A. ONLY

WARNING

Electrical Shock Hazard

Grounding through the neutral conductor is prohibited for new

branch-circuit installations (1996 NEC); mobile homes; and recreational

vehicles, or in an area where local codes prohibit grounding through the

neutral conductor. For installations where grounding through the

neutral conductor is prohibited, see the Ungrounded Neutral graphic.

Use grounding terminal or lead to ground unit.

Connect neutral terminal or lead to branch circuit neutral in usual

manner.

Failure to do so could result in death, ﬁre or electric shock.

3-Wire Cable from Home Power Supply

IMPORTANT: Use the 3-wire cable from home power supply where local codes

permit a 3-wire connection.

1. Disconnect power.

Grounded Neutral

a Junction Box

b Black Wires

c Neutral (White)

Wires

d Ground (Green or

Bare) Wire

e Cable from Oven

f UL Listed Conduit

Connector

g Red Wires

h UL Listed Wire Connectors

i House Electrical Supply

2. Connect the two black wires b together using a UL listed wire connector.

3. Connect the two neutral (white) wires

c and the ground (green or bare) wire d

(of the oven cable) using a UL listed wire connector.

4. Connect the two red wires

g together using a UL listed wire connector.

5. Install junction box cover.

4-WIRE CONNECTION (UNGROUNDED NEUTRAL) - U.S.A. AND

CANADA

4-Wire Cable from Home Power Supply

IMPORTANT: Use the 4-wire cable from home power supply in the U.S. where local

codes do not allow grounding through neutral, New Branch circuit installations (1996

NEC), mobile homes and recreational vehicles, new construction and in Canada.

1. Disconnect power.

Ungrounded Neutral

a Junction Box

b Black Wires

c Red Wires

d Cable from Oven

e UL listed or CSA

Approved Conduit

Connector

f Ground (Green or

Bare) Wires

g UL Listed Wire

Connector

h Neutral (White) Wires

i House Electrical Supply

2. Connect the 2 black wires

b together using a UL listed wire connector.

3. Connect the 2 red wires

c together using a UL listed wire connector.

4. Untwist white wire from green (or bare) ground wire coming from the oven.

5. Connect the 2 neutral (white) wires

h together using a UL listed wire connector.

6. Connect the ground (green or bare) wire

f from the oven cable to the ground

(green or bare) wire (in the junction box) using a UL listed wire connector.

7. Install junction box cover.

STEP 5 - MOUNT THE OVEN

1. Slide the oven completely into the cabinet until the back surface of the front

frame touches the front wall of the cabinet. Center the oven within the cabinet

cutout.

NOTE: Push against seal area of the oven front frame when pushing the oven

into the cabinet. Do not push against the outside edges.

a Mounting Frame

b Mounting Frame Hole

2. There are two holes, one on each side of the front frame that surrounds the oven



the cabinet.

NOTE: The double oven has four mounting holes, two on each side.

3. Insert the # 8–14 x 1" screws (provided) through the pilot holes to securely

fasten the oven to the cabinet. Do not overtighten screws.

4. Replace the oven racks.

5. Reconnect power to the oven.

STEP 6 - REPLACE THE DOOR

IMPORTANT: The oven door is heavy and fragile, and the door front is glass. To avoid

oven door glass breakage, use both hands, and grasp only the sides of the oven door

to remove.

1. Verify that the door hinge latches are forward, and then insert the oven door

hinges into the openings.

2. Lower the oven door to engage the hinges.

3. Press the hinge latches down to lock.

STEP 7 - COMPLETE INSTALLATION

1. Check that all parts are now installed. If there is an extra part, go back through

the steps to see which step was skipped.

2. Dispose of/recycle all packaging materials.

3. Check Operation of Oven.

•

Turn on power.

•

Press BROIL.

•

Set the temperature.

•

Press START.

NOTE: If oven(s) does not operate, check the following:

•

Household fuse is intact and tight; or circuit breaker has not tripped.

•

Electrical supply is connected.

•

See “Troubleshooting” section in the User Manual.

4. When oven has been on for 5 minutes, feel for heat. If you do not feel heat or if



technician.

5. 

IMPORTANT: For oven use and cleaning, read the User Manual.

TABLE DES MATIERES

SÉCURITÉ DU FOUR ..........................................................................................17

EXIGENCES D’INSTALLATION ........................................................................... 18

Outillage et pièces ....................................................................................................... 18

Exigences d’emplacement ..........................................................................................18

Dimensions de l’ouverture .......................................................................................... 20

 ...........................................................................................21

INSTRUCTIONS D’INSTALLATION .................................................................... 23

Étape 1 - Déballage du four .........................................................................................23

Étape 2 - Dépose de la porte du four .........................................................................24

Étape 3 - Installation du four .......................................................................................25

Étape ............................................................................26

Étape 5 - Installation du four .......................................................................................30

Étape 6 - Repose de la porte du four ...........................................................................30

Étape 7 – Fin de l’installation .......................................................................................31

SÉCURITÉ DU FOUR

Votre sécurité et celle des autres est très importante.

DANGER

AVERTISSEMENT

ATTENTION

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les

dangers potentiels de décès et de blessures graves à

vous et à d’autres. Tous les messages de sécurité

suivront le symbole d’alerte de sécurité et le mot

“DANGER”, “AVERTISSEMENT” ou “ATTENTION”.

Ces mots signiﬁent :

Une situation de danger

imminent. Vous courez le risque

d’un décès ou de blessures

graves si vous ne suivez pas

immédiatement les instructions.

Une situation potentiellement

dangereuse qui, si vous ne

l’évitez pas, peut provoquer la

mort ou des blessures graves.

Une situation potentiellement

dangereuse qui, si vous ne

l’évitez pas, peut entraîner des

blessures légères à modérées.

Tous les messages de sécurité vous diront quel est le danger potentiel

et comment réduire le risque de blessure et ce qui peut se produire en

cas de non-respect des instructions.

Nous donnons de nombreux messages de sécurité importants dans ce

manuel et sur votre appareil ménager. Assurez-vous de toujours lire

tous les messages de sécurité et de vous y conformer.

EXIGENCES D’INSTALLATION

OUTILLAGE ET PIÈCES

Rassembler les outils nécessaires avant d’entreprendre l’installation. Lire et

observer les instructions fournies avec chacun des outils de la liste ci-dessous.

TOUTES LES INSTALLATIONS

Outils nécessaires :

•

Mètre-ruban

•

Règle

•

Crayon

•

Tournevis Phillips

•

Niveau

•



•



•

Scie-cloche de 1"

•



•

Gants et lunettes de sécurité

•

Voltmètre (0-250VAC)

Pièces nécessaires:

•

Connecteur de conduit homologué UL

•



Pièces fournies :

•

Vis n° 8-14 x 1" – Fours simples (2), fours doubles (4)

DONNÉES TECHNIQUES

FOUR DIMENSION MODÈLE

Caractéristiques électriques et

puissance raccordée maximum

Four simple

encastrable

30" (76 cm) HCW3260AES

@ 240 Volts

60 Hz

@ 208 Volts

60 Hz

Ampères Watts Ampères Watts

20 4800 17,3 3605

Four double

encastrable

30" (76 cm) HCW3285AES 35,4 8500 30,7 6381

EXIGENCES D’EMPLACEMENT

IMPORTANT : Observer les dispositions de tous les codes et règlements en vigueur.

•

Respecter les dimensions de l’ouverture entre les placards illustrées. Ces



•

L’espace d’installation dans un encastrement doit permettre la formation d’une

enceinte complète autour de la partie encastrée du four.

•



avec le bas de l’ouverture découpée dans le placard.

La page charge ...

Haier HCW3285AES Installation Instructions Manual

Marque: Haier

Modèle: HCW3285AES

Taper: Installation Instructions Manual

Ce manuel convient également à

HCW3260AES

Télécharger le PDF

rapport

dans d''autres langues

English: Haier HCW3285AES
español: Haier HCW3285AES

Haier HCW3285AES Installation Instructions Manual

Ce manuel convient également à

Haier HCW3285AES Installation Instructions Manual

dans d''autres langues

Documents connexes

Autres documents