AEG 66301K-MN96G Manuel utilisateur

66301K-MN

Ceramic glass induction hob

Table de cuisson vetrocéramique à induction

Glaskeramische inductie-kookplaat

Installation and Operating Instructions

Instructions de montage et mode d’emploi

Montage- en gebruiksaanwijzing

2

Dear Customer,

Please read these user instructions carefully and keep them to refer to

later.

Please pass the user instructions on to any future owner of the appli-

ance.

The following symbols are used in the text:

1 Safety instructions

Warning! Information that affects your personal safety.

Important! Information that prevents damage to the appliance.

3 Useful tips and hints

2 Environmental information

3

Contents

Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Description of the Appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Operating the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Setting the heat setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switching the outside ring on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Switching the STOP+GO function on and off. . . . . . . . . . . . . . . . . . . . . . . . . 10

Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Guarantee Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Customer Service Centres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

4

Operating Instructions

1 Safety instructions

3

Please comply with these instructions. If you do not, any damage re-

sulting is not covered by the warranty.

5 This appliance conforms with the following EU Directives:

– 73/23/EEC dated 19.02.1973 Low Voltage Directive

– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending

Directive 92/31/EEC

– 93/68/EEC dated 22.07.1993 CE Marking Directive

Correct use

• This appliance should be used only for normal domestic cooking and

frying of food.

• The appliance must not be used as a work surface or as a storage sur-

face.

• Additions or modifications to the appliance are not permitted.

• Do not place or store flammable liquids, highly inflammable materials

or fusible objects (e.g. plastic film, plastic, aluminium) on or near the

appliance.

Children’s safety

• Small children must be kept away from the appliance.

• Only let bigger children work on the appliance under supervision.

General safety

• The appliance may only be installed and connected by trained, regis-

tered service engineers.

• Built-in appliances may only be used after they have built in to suita-

ble built-in units and work surfaces that meet standards.

• In the event of faults with the appliance or damage to the glass ce-

ramic (cracks, scratches or splits), the appliance must be switched off

and disconnected from the electrical supply, to prevent the possibility

of an electric shock.

• Repairs to the appliance must only be carried out by trained regis-

tered service engineers.

5

Safety during use

• Remove stickers and film from the glass ceramic.

• There is the risk of burns from the appliance if used carelessly.

• Cables from electrical appliances must not touch the hot surface of

the appliance or hot cookware.

• Overheated fats and oils can ignite quickly. When cooking with fat or

oil (e.g. chips) do not leave the appliance unattended.

• Switch the cooking zones off after each use.

Safety when cleaning

• For cleaning, the appliance must be switched off and cooled down.

• For safety reasons, the cleaning of the appliance with steam jet or

high-pressure cleaning equipment is not permitted.

How to avoid damage to the appliance

• The glass ceramic can be damaged by objects falling onto it.

• The edge of the glass ceramic can be damaged by being knocked by

the cookware.

• Cookware made of cast iron, cast aluminium or with damaged bot-

toms can scratch the glass ceramic if pushed across the surface.

• Objects that melt and things that boil over can burn onto the glass

ceramic and should be removed straightaway.

• Do not use the cooking zones with empty cookware or without cook-

ware.

6

Description of the Appliance

Cooking surface layout

Control panel layout

Triple cooking zone

800/1600/2300W

Multi-purpose zone

1500/2400W

Singlecooking zone

1200W

Control panel

Singlecooking zone

1200W

On/Off

with power indicator

Timer display

Cooking zone indicators

Timer function

STOP+GO

with pilot light

Heat setting selection

Timer

Display

Second ring

On/Off

Triple ring pilot light

Outside/middle ring

On/Off

Multi-purpose

zone pilot light

7

Touch Control sensor fields

The appliance is operated using Touch Control sensor fields. Functions

are controlled by touching sensor fields and confirmed by displays and

acoustic signals.

Touch the sensor fields from above, without covering other sensor

fields.

Sensor field Function

On / Off To switch the appliance on and

off

Increase settings To increase heat settings

Reduce settings To reduce heat settings

TIMER Timer Timer selection

Increase settings To increase Timer time

Reduce settings To reduce Timer time

Stop+Go To switch the Keep Warm setting

on/off

Triple ring switch To switch outer rings

on and off

Multi-purpose zone To switch the outside ring on and

off

8

Displays

Residual heat indicator

1 Warning! Risk of burns from residual heat. After being switched off,

the cooking zones need some time to cool down. Look at the residual

heat indicator

h .

3 Residual heat can be used for melting and keeping food warm.

Display Description

¾ Cooking zone is switched off

u Keep warm setting Keep warm setting/STOP+GO

function is set

¿ - Ç Heat settings Heat setting is set

2 - 6 Heating setting plus

decimal point

Intermediate heat setting is set

a Automatic warm up

function

Automatic warm-up function is

activated

e Fault Malfunction has occurred

h Residual heat Cooking zone is still hot

l Child safety device Lock/child safety device is en-

gaged

_ Safety cut-out Safety cut-out has been activated

9

Operating the appliance

Switching the appliance on and off

3 After switching on, within approx. 10 seconds a heat setting or a func-

tion must be set, otherwise the appliance automatically switches itself

off.

Setting the heat setting

Control panel Display Pilot light

Switch on Touch for 2 seconds ¾ / h lights up

Switch off Touch for 1 second h / none goes out

Control panel Indicator

To increase Touch u to Ç

To decrease Touch Ç to ¾

To switch off Touch and at the same time ¾

10

Switching the outside ring on and off

By switching the outside rings on or off, the effective heating surface

can be matched to the size of the cookware.

3 Before an outside ring can be switched on, the inside ring must be

switched on.

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that

are switched on to the keep warm setting and then back to the heat

setting that was previously set. This function can be used to briefly in-

terrupt and then continue the cooking process e.g. to take a telephone

call.

3 Timer functions are not stopped by STOP+GO.

3 STOP+GO locks the whole control panel except the sensor field .

Triple cooking zone Sensor panel Power indicator

To switch on middle

ring

Touch for 1-2 seconds. One power indicator is lit.

To switch on outside

ring

Touch for 1-2 seconds. Two power indicators are lit.

To switch off outside

ring

Touch for 1-2 seconds. Second power indicator goes out.

To switch off middle

ring

Touch for 1-2 seconds. First power indicator goes out.

Roasting zone Sensor panel Power indicator

To switch on outside ring Touch for 1-2 seconds. is lit

To switch off outside ring Touch for 1-2 seconds. goes out

Control panel Display

To switch

on

Touch STOP+GO u

To switch

off

Touch STOP+GO heat setting that was previ-

ously set (not automatic

warm up function)

11

Using the automatic warm-up function

All cooking zones are equpped with an automatic warm up function

When setting a heat setting using , when starting from

¾, the cook-

ing zone switches to full power for a certain amount of time and then

automatically switches back to the heat setting set.

3 If during the automatic warm up a a higher heat setting is selected,

e.g. from

Á to Ã, the automatic warm up is adjusted.

3 If there is still residual heat on the cooking zone (display h), the auto-

matic warm up is not performed.

Control

panel

possible

heat set-

tings

Display

Switch on

(only when starting at

¾)

Touch ¿ to Æ a (after 5 sec-

onds)

Switch off Touch Æ to ¿ / u Æ to u

Not used Touch Ç to u Ç to u

12

The length of time that the automatic warm up function operates de-

pends on the heat setting selected.

Using the child safety device

The child safety device prevents unintentional use of the appliance.

Setting the child safety device

Heat

setting

Length of the

automatic warm up

[min:sec]

Intermedi-

ate

heat

setting

Length of the

automatic warm up

[min:sec]

v 0:30

1 1:00

2 1:40 2. 2:40

3 4:50 3. 5:30

4 6:30 4. 8:10

5 10:10 5. 12:20

6 2:00 6. 2:30

7 3:30

8 4:30

9 ---

Step Control panel Display/Signal

1. Switch on the appliance

(Do not set a heat setting)

¾

2. Touch until the signal

sounds

Acoustic signal

3. Touch l

Appliance switches off. The child safety device is engaged.

13

Releasing the child safety device

Overriding the child safety device

The child safety device can be released in this way for a single cooking

session; it remains activated afterwards.

3 After overriding the child safety device, a heat setting or a function

must be set within approx. 10 seconds, otherwise the appliance auto-

matically switches itself off.

Step Control panel Display/Signal

1. Switch on the appliance l

2. Touch until the signal

sounds

Acoustic signal

3. Touch

Appliance switches off. The child safety device is released.

Step Control panel Display/Signal

1. Switch on the appliance l

2. Touch and at the same time ¾ / acoustic signal

Until the appliance is next switched off, it can used as normal.

14

Using the timer

3 While the countdown timer is activated, no cooking zone can be used.

3 The countdown timer basically cannot be used if a cooking zone is

switched on.

3 If a cooking zone is switched off, the timer function set is also switched

off.

Selecting a cooking zone

3 If the pilot light is flashing more slowly, the heat setting can be set or

modified.

3 If other timer functions are set, after a few seconds the shortest re-

maining time of all the timer functions is displayed and the corre-

sponding pilot light flashes.

Function Pre-requisite Result after time

has elapsed

Automatic cut-out With heat setting set Acoustic signal

00 flashes

Cooking zone

switches off

Countdown timer Cooking zones are not

switched on

Acoustic signal

00 flashes

Step Control panel Display

1. Touch TIMER once Pilot light of the first

cooking zone flashes

2. Touch TIMER once Pilot light of the second

cooking zone flashes

3. Touch TIMER once Pilot light of the third

cooking zone flashes

4. Touch TIMER once Pilot light of the fourth

cooking zone flashes

15

Setting the time

Switching off the timer function

Changing the time

Step Control panel Indicator

1. Select TIMER cooking

zone

Pilot light for the cooking zone se-

lected flashes

2. Touch or 00 to 99 minutes

After a few seconds the pilot light flashes more slowly.

The time is set.

The time counts down.

Step Control panel Indicator

1. Select TIMER cooking

zone

Pilot light of cooking zone selected

flashes faster

Time remaining is displayed

2. Touch The time remaining counts back-

wards to 00.

The pilot light goes out.

The Timer function for the selected cooking zone is switched off.

Step Control panel Indicator

1. Select TIMER cooking

zone

Pilot light of the selected cooking

zone flashes faster

Time remaining is displayed

2. Touch or 01 to 99 minutes

After a few seconds, the pilot light flashes more slowly.

The time is set.

The time counts down.

16

Displaying the time remaining for a cooking zone

Switching off the acoustic signal

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat setting is not set for

a cooking zone within approx. 10 seconds, the cooking surface auto-

matically switches itself off.

• If one or more sensor fields are covered for longer than approx. 10

seconds, e.g. by a pan placed upon it, a signal sounds and the cooking

surface switches off automatically.

• If all cooking zones are switched off, the cooking surface automati-

cally switches itself off after approx. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel

immediately switches all cooking zones off.

Step Control panel field Display

1. TIMER Select cooking

zone

Pilot light of the cooking zone select-

ed flashes faster

The time remaining is displayed

After a few seconds the pilot light flashes more slowly.

Step Control panel field Acoustic signal

1. Touch TIMER Acoustic signal to acknowledge.

Acoustic signal stops.

17

Cooking zones

• If one of the cooking zones is not switched off after a certain time, or

if the heat setting is not modified, the relevant cooking zone switch-

es off automatically.

Heat setting Switches off after

V, 1 - 2

6 hours

3 - 4

5 hours

5

4 hours

6 - 9

1.5 hours

18

Tips on Cooking and Frying

3

Information on acrylamides

According to the latest scientific knowledge, intensive browning of

food, especially in products containing starch, can constitute a health

risk due to acrylamides. Therefore we recommend cooking at the lowest

possible temperatures and not browning foods too much.

Cookware

• You can recognise good cookware from the bottoms of the pans. The

bottom should be as thick and flat as possible.

• Cookware made of enamelled steel or with aluminium or copper bot-

toms can leave discolorations on the glass ceramic surface which are

difficult or impossible to remove.

Energy saving

2 Always place cookware on the

cooking zone before it is switched

on.

2 If possible, always place lids on the

pans.

2 Switch cooking zones off before the

end of the cooking time, to take ad-

vantage of residual heat.

2 Bottom of pans and cooking zones

should be the same size.

19

Examples of cooking applications

The information given in the following table is for guidance only.

Heat

set-

ting

Cooking-

process

suitable for

Cooking

time

Tips/Hints

0 Off position

V

Keeping

food

warm

Keeping cooked foods

warm

as required Cover

1-2

Melting

Hollandaise sauce,

melting butter, chocolate,

gelatine

5-25 mins. Stir occasionally

Solidi-

fying

Fluffy omelettes, baked

eggs

10-40 mins. Cook with lid on

2-3

Simmer-

ing on

low heat

Simmering rice and milk-

based dishes

Heating up ready-cooked

meals

25-50 mins.

Add at least twice as

much liquid as rice, stir

milk dishes part way

through cooking

3-4

Steaming

Braising

Steaming vegetables, fish

braising meat

20-45 mins.

With vegetables add

only a little liquid (a

few tablespoons)

4-5 Boiling

Steaming potatoes 20-60 mins.

Use only a little liquid,

e. g.: max.

¼ l water

for 750 g potatoes

Cooking larger quantities

of food, stews and soups

60-150

mins.

Up to 3 l liquid plus in-

gredients

6-7

Gentle

Frying

Frying escalopes, veal

cordon bleu, cutlets, ris-

soles, sausages, liver,

roux, eggs, pancakes,

doughnuts

Steady

frying

Turn halfway through

cooking

7-8

Heavy

Frying

Hash browns, loin steaks,

steaks, Flädle (pancakes

for garnishing soup)

5-15 mins.

per pan

Turn halfway through

cooking

9

Boiling

Searing

Deep

frying

Boiling large quantities of water, cooking pasta, searing meat

(goulash, pot roast), deep frying chips

20

Cleaning and Care

1

Take care! Risk of burns from residual heat.

Let the appliance cool down.

1 Warning! Sharp objects and abrasive cleaning materials will damage

the appliance. Clean with water and washing up liquid.

1 Warning! Residues from cleaning agents will damage the appliance.

Remove residues with water and washing up liquid.

Cleaning the appliance after each use

1.Wipe the appliance with a damp cloth and a little washing up liquid.

2.Rub the appliance dry using a clean cloth.

Removing deposits

1.Place a scraper on the glass ceramic surface at an angle.

2.Remove residues by sliding the blade over the surface.

3.Wipe the appliance with a damp cloth and a little washing up liquid.

4.Rub the appliance dry using a clean cloth.

*Scrapers and cleaners for glass ceramic and stainless steel can be purchased in specialist shops

3 Remove stubborn residues with a cleaner for glass ceramic or stainless

steel.

3 Scratches or dark stains on the glass ceramic that cannot be removed

do not however affect the functioning of the appliance.

Remove

Type of dirt

imme-

diately

when the appliance has

cooled down

using

sugar, food containing sugar yes ---

a scraper*

plastics, tin foil yes ---

limescale and water rings --- yes

cleaner for glass ce-

ramic or stainless

steel*

fat splashes --- yes

shiny metallic discolorations --- yes

La page charge ...

AEG 66301K-MN96G Manuel utilisateur

AEG 66301K-MN96G Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents