Indesit DIFP 68B1 EU Mode d'emploi

Marque: Indesit

Modèle: DIFP 68B1 EU

Catégorie: Lave-vaisselle

Taper: Mode d'emploi

Ce manuel convient également à

EDIFP 68B1 A EU

DIFP 68B1, EDIFP 68B1

English

Operating instructions

DISHWASHER - Contents

Operating instructions,1

Precautions and advice, 2-3

Assistance, 4

Product Data, 5

Installation, 6-7

Description of the appliance, 8

Refined salt and rinse aid, 9

Loading the racks, 10-11

Detergent and dishwasher use, 12

Wash cycles, 13

Special wash cycles and options, 14

Care and maintenance, 15

Troubleshooting, 16

Français

Mode d’emploi

LAVE-VAISSELLE - Sommaire

Mode d’emploi, 1

Précautions et conseils, 3-4

Service, 4

Fiche produit, 5

Installation, 17-18

Description de l’appareil, 19

Sel régénérant et Produit de rinçage, 20

Charger les paniers, 21-22

Produit de lavage et utilisation du lave-vaisselle, 23

Programmes, 24

Programmes spéciaux et Options, 25

Entretien et soin, 26

Anomalies et remèdes, 27

Precautions and advice

This appliance was designed and

manufactured in compliance with international

safety standards. The following information

has been provided for safety reasons and

should be read carefully.

Keep this instruction manual in a safe place

for future reference. If the appliance is sold,

given away or moved, make sure the manual

is kept with the machine.

Read the instructions carefully, as they

include important information on safe

installation, use and maintenance.

This appliance was designed for domestic

use or similar applications, for example:

- farmhouses;

- use by guests in hotels, motels and other

residential settings;

- bed & breakfasts.

Remove the appliance from all packaging

and make sure it was not damaged during

transportation. If it was damaged, contact

the retailer and do not proceed any further

with the installation process.

General safety

• This appliance should not be operated

by children younger than 8 years, people

with reduced physical, sensory or mental

capacities, or inexperienced people

who are not familiar with the product,

unless they are given close supervision

or instructions on how to use it safely and

are made aware by a responsible person

of the dangers its use might entail.

• Children must not play with the appliance.

• It is the user's responsibility to clean and

maintain the appliance. Children should

never clean or maintain it unless they are

given supervision.

• The appliance was designed for domestic

use inside the home and is not intended

for commercial or industrial use.

• The appliance must be used to wash

domestic crockery in accordance with the

instructions in this manual.

• The appliance must not be installed

outdoors, even in covered areas. It is

extremely dangerous to leave the machine

exposed to rain and storms.

• Do not touch the appliance when barefoot.

• When unplugging the appliance always

pull the plug from the mains socket. Do

not pull on the cable.

• The water supply tap must be shut off

and the plug should be removed from

the electrical socket at the end of every

cycle and before cleaning the appliance

or carrying out any maintenance work.

• The maximum number of place settings is

shown in the product sheet.

• If the appliance breaks down, do not under

any circumstances touch the internal parts

in an attempt to perform the repair work

yourself.

• Do not lean or sit on the open door: this

may cause the appliance to overturn.

• The door should not be left open as it may

create a dangerous obstacle.

• Keep detergent and rinse aid out of reach

of children.

• The packaging material should not be

used as a toy.

• Knives and other utensils with sharp

edges must be placed either with the

points/blades facing downwards in the

cutlery basket or horizontally on the tip-up

compartments or in the tray/third basket,

if available.

• Connect the appliance to the water mains

using the new supply hose provided with

the appliance. Do not re-use the old hose.

• Install the back side of a free-standing

dishwasher against a wall.

Disposal

• To dispose of any packaging materials,

follow local legislation so that the

packagings may be reused.

• The European Directive 2012/19/EU

relating to Waste Electrical and Electronic

Equipment (WEEE) states that household

appliances should not be disposed of

using the normal solid urban waste cycle.

Exhausted appliances should be collected

separately in order to optimise the cost of

reusing and recycling the materials inside

the machine, while preventing potential

damage to the atmosphere and public

health. The crossed-out dustbin symbol

shown on all products reminds the owners

of their obligations regarding separated

waste collection.

For further information relating to the correct

disposal of household appliances, owners

may contact the relevant public authority or

the local appliance dealer.

Saving energy and respecting the

environment

Saving water and energy

• Only begin a wash cycle when the

dishwasher is full. While waiting for the

dishwasher to be filled, prevent unpleasant

odours with the Soak cycle

(if available, see

Wash Cycles).

• Select a wash cycle that is suited to the

type of crockery and to the soil level using

the Table of Wash Cycles:

- For dishes with a normal soil level, use

the Eco wash cycle, which guarantees low

energy and water consumption levels.

- If the load is smaller than usual activate

the Half Load option

(see Special wash cycles

and options, if available).

• If your electricity supply contract gives

details of electricity-saving time bands, run

the wash cycles when electricity prices are

lower. The Delayed Start option can help

you organise the wash cycles accordingly

(see Special wash cycles and options, if available).

par des enfants âgés de plus de 8 ans et

par des personnes dont les capacités

physiques, sensorielles ou mentales sont

réduites, ou encore sans l'expérience

ou la connaissance nécessaire, mais

sous l'étroite surveillance d'un adulte

responsable ou après que ces personnes

aient reçu des instructions relatives à une

utilisation en toute sécurité de l'appareil et

compris les dangers qui lui sont inhérents.

• Les enfants ne doivent pas jouer avec

l'appareil.

• Le nettoyage et l'entretien de l'appareil

doivent être effectués par l'utilisateur. Ils ne

doivent pas être effectués par des enfants

sans surveillance.

• Cet appareil est conçu pour un usage de

type non professionnel à l'intérieur d'une

habitation.

• Cet appareil est destiné au lavage de

vaisselle à usage domestique et selon les

instructions reportées dans cette notice.

• Ne pas installer l’appareil à l’extérieur,

même dans un endroit protégé, car il est

extrêmement dangereux de l’exposer à la

pluie et aux orages.

• Ne pas toucher au lave-vaisselle pieds nus.

• Ne jamais tirer sur le câble pour débrancher

la fiche de la prise de courant.

• Fermer le robinet de l’eau et débrancher la

fiche de la prise de courant après chaque

utilisation et avant d’effectuer tous travaux

de nettoyage et d’entretien.

• Le nombre maximal de couverts est indiqué

dans la fiche produit.

• En cas de panne, éviter à tout prix d’accéder

aux mécanismes internes pour tenter une

réparation.

• Ne pas s’appuyer à la porte ouverte ou s’y

asseoir : l’appareil pourrait basculer.

• Ne pas garder la porte ouverte pour éviter

de buter contre elle en risquant de se faire

mal.

• Garder les produits de lavage et de rinçage

hors de la portée des enfants.

• Les emballages ne sont pas des jouets

pour enfants.

• Les couteaux et ustensiles de cuisine à

bords tranchants doivent être disposés,

pointes et lames tournées vers le bas,

dans le panier à couverts ou, à plat, sur les

clayettes rabattables du panier supérieur

ou bien encore, si le modèle en est équipé,

dans le plateau ou troisième panier.

• L’appareil doit être raccordé à l’arrivée

d’eau en le reliant avec le nouveau tuyau

Précautions et conseils

CET appareil a été conçu et fabriqué

conformément aux normes internationales de

sécurité. Ces consignes sont fournies pour

des raisons de sécurité, il faut les lire

attentivement.

Conserver ce mode d’emploi pour pouvoir

le consulter à tout moment. En cas de vente,

de cession ou de déménagement, s’assurer

qu’il accompagne bien l’appareil.

Lire attentivement les instructions: elles

fournissent des conseils importants sur

l’installation, l’utilisation et la sécurité de

l’appareil.

Cet appareil est conçu pour un usage

domestique ou autres applications similaires,

telles que:

- fermes;

- utilisation par les clients d’hôtels, de motels

ou autres locaux de type résidentiel;

- chambres d’hôtes.

Déballer l’appareil et s’assurer qu’il n’a pas

été endommagé pendant le transport. S’il

est abîmé, ne pas le raccorder et contacter

le revendeur.

Sécurité générale

• Cet appareil électroménager peut être utilisé

d’arrivée. L’ancien tuyau d’arrivée ne doit

pas être réutilisé.

• Si le lave-vaisselle est en libre pose, le côté

arrière de ce dernier doit être placé contre

le mur.

Mise au rebut

• Mise au rebut du matériel d’emballage : se

conformer aux réglementations locales de

manière à ce que les emballages puissent

être recyclés.

• La directive européenne 2012/19/EU sur

les déchets d’équipements électriques

et électroniques (DEEE), prévoit que les

électroménagers ne peuvent pas être

traités comme des déchets solides urbains

normaux. Les appareils usagés doivent

être collectés séparément afin d’optimiser

le taux de récupération et le recyclage

des matériaux qui les composent et

réduire l’impact sur la santé humaine et

l’environnement Le symbole de la poubelle

barrée est appliqué sur tous les produits

pour rappeler qu’ils font l’objet d’une

collecte sélective.

Pour tout autre renseignement sur la

collecte des électroménagers usés, prière

de s’adresser au service public préposé ou

au vendeur.

Economies et respect de

l’environnement

Faire des économies d’eau et d’électricité

• Ne faire fonctionner le lave-vaisselle

que quand il est rempli au maximum de

sa capacité. Dans l’attente de remplir

l’appareil, lancer le cycle de Trempage

pour éviter la formation de mauvaises

odeurs

(si disponible - voir Programmes).

• Sélectionner un programme adapté

au type de vaisselle et à son degré de

salissure, consulter pour cela le Tableau

des programmes :

- pour de la vaisselle normalement sale,

choisir le programme Eco (économique),

il limite la quantité d’eau et d’électricité

utilisée.

- pour une quantité réduite de vaisselle,

choisir l’option Demi-charge

(si disponible voir

Programmes Spéciaux et Options).

• Si le contrat de fourniture d’électricité

prévoit des tranches horaires à prix réduit,

effectuer les lavages pendant ces heures

creuses. L’option Départ différé peut aider

à organiser les lavages dans ce sens

(

disponible voir Programmes Spéciaux et Options).

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the

Troubleshooting guide

(see Troubleshooting).

• Restart the programme to check whether the problem

has ceased to exist.

• If the problem persists, contact the Authorised Technical

Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• The type of malfunction.

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the appliance data plate

(see Description of the appliance)

Service

Avant d’appeler le service d’assistance technique:

• Vérifier s’il est possible de résoudre l’anomalie soi-même

(voir Anomalies et remèdes).

• Faire repartir le programme pour s’assurer que

l’inconvénient a été résolu.

• Si ce n’est pas le cas, contacter un Service d’Assistance

Technique agréé.

Ne jamais faire appel à des techniciens non agréés.

Communiquer:

• le type d’anomalie;

• le modèle de l’appareil (Mod.);

• le numéro de série (S/N).

Ces informations figurent sur la plaque signalétique

apposée sur l’appareil

(voir Description de l’appareil).

Product Fiche

Brand

INDESIT

Model

DIFP 68B1, EDIFP 68B1

Rated capacity in standard place settings (1)

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)

A+

Energy consumption per year in kWh (2)

293.0

Energy consumption of the standard cleaning cycle in kWh

1.03

Power consumption of the off-mode in W

0.5

Power consumption of the left-on mode in W

5.0

Water consumption per year in litres (3)

3080.0

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)

Programme time for standard cleaning cycle in minutes

190

The duration of the left-on mode in minutes

Noise in dB(A) Re 1pW

Built-in model

Yes

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled

tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle

corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy consumption

depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Product Data (product fiche)

Fiche de produit

Marque

INDESIT

Modèle

DIFP 68B1, EDIFP 68B1

Capacité nominale dans un environnement standard (1)

Classe énergétique sur une échelle de A+++ (faible consommation) à D (consommation élevée)

A+

Consommation d''énergie par année en kWh (2)

293.0

Consommation d''énergie du cycle de lavage standard en kWh

1.03

Consommation d''energie en mode "off" en W

0.5

Consommation d''energie en mode "on" en W

5.0

Consommation d''eau par an en litres (3)

3080.0

Classe d’efcacité du séchage sur une échelle de G (efcacité minimum) à A (efcacité maximum)

Durée du programme pour un cycle de lavage standard en minutes

190

Durée du mode "on" en minutes

Émissions acoustiques dans l’air, exprimées en dB(A) re 1 pW

Encastrable

Oui

NOTES

1) Les informations sur l’étiquette et sur la che se rapportent au cycle de lavage standard. Ce programme convient pour laver

une vaisselle normalement sale, et il s’agit des programmes les plus efcaces en termes de consommation combinée d’eau et

d’énergie. Le cycle de lavage standard correspond au cycle éco.

2) Sur la base de 280 cycles de lavage standard avec une alimentation en eau froide et une consommation en modes à faible

puissance. La consommation réelle d’énergie dépend des conditions d’utilisation de l’appareil

3) Sur la base de 280 cycles de lavage standard. La consommation réelle d’énergie dépend des conditions d’utilisation de

l’appareil.

Fiche de produit

Installation

* Only available in selected models.

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto

its back.

Connecting the water supply

Adaptation of the water supply for installation should only

be performed by a qualified technician.

The water inlet and outlet hoses may be positioned towards

the right or the left in order to achieve the best possible

installation.

Make sure the dishwasher does not bend or squash the hoses.

Connecting the water inlet hose

• To a 3/4” gas cold or hot water connection point (max.

60°C).

• Run the water until it is perfectly clear.

• Screw the inlet hose tightly into position and turn off the

tap.

If the inlet hose is not long enough, contact a specialist

store or an authorised technician

(see Assistance)

The water pressure must be within the values indicated

in the Technical Data table - otherwise the dishwasher may

be function properly.

Make sure the hose is not bent or compressed.

Connecting the water outlet hose

Connect the outlet hose to a drain duct with a minimum

diameter of 2 cm. (A)

The outlet hose connection must be at a height ranging from

40 to 80 cm from the floor or surface where the dishwasher

rests.

Before connecting the water outlet hose to the sink drain,

remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water

supply in the event of anomalies or leaks from inside the

appliance.

Some models are also equipped with the supplementary

safety device New Acqua Stop*, which guarantees anti-

flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstances should the water inlet hose be cut

as it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make

sure that:

• The socket is earthed and complies with current

regulations;

• the socket can withstand the maximum load of the

appliance as shown on the data plate located on the inside

of the door

(see chapter Description of the appliance);

• The power supply voltage falls within the values indicated

on the data plate on the inside of the door.

• The socket is compatible with the plug of the appliance. If

this is not the case, ask an authorised technician to replace

the plug (

see Assistance

). Do not use extension cables or

multiple sockets.

Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced

by the manufacturer or its authorised Technical Assistance

Service in order to prevent all potential hazards.

(See

Assistance)

The Company shall not be held responsible for any

incidents, if these regulations are not observed.

Positioning and levelling

1. Position the dishwasher on a level sturdy floor. If the floor is

uneven, the front feet of the appliance may be adjusted until

it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move

or cause vibrations and noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive

transparent strip* under the wooden shelf in order to protect

it from any condensation which may form.

3. Place the dishwasher so that its sides or back panel are in

contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop*

(see the

Assembly instruction sheet)

4*. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher

using a hexagonal spanner with an opening of 8 mm. Turn the

spanner in a clockwise direction to increase the height and

in an anticlockwise direction to decrease it.

(see Building-in

instruction sheet attached to the documentation)

MIN 40 cm

MAX 80 cm

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack

(if any).

Water softener settings

Before starting the first wash cycle, set the hardness lev-

el of the water from the mains supply.

(see chapter Rinse

aid and refined salt).

First load the softener tank with water, then introduce about

1 kg of salt. It is perfectly normal for water to flow out.

As soon as this procedure is complete, run a wash cycle.

Only use salt that has been specifically designed for dish-

washers.

After the salt has been poured into the machine, the LOW

SALT indicator light* switches off.

If the salt container is not filled, the water softener and the

heating element may be damaged as a result.

Technical data

Dimensions

width 60 cm

height 85 cm

depth 60 cm

Capacity 13 standard place-settings

Water supply pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply voltage See appliance data plate

Total absorbed power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment (WEEE)

* Only available in selected models.

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc etc.

Description of the

appliance

***Only in completely built-in models.

* Only available in selected models.

The number and type of wash cycles and options may vary depending on the dishwasher model.

Overall view

1. Upper rack

2. Upper sprayer arm

3. Tip-up compartments

4. Rack height adjuster

5. Lower rack

6. Lower sprayer arm

7. Washing filter

8. Salt dispenser

9. Detergent dispenser and rinse-aid dispenser

10. Data plate

11. Control panel***

Control panel

Select wash cycle button

Salt indicator light

Rinse aid indicator light

Wash cycle number and

remaining time indicator light

Delayed start button

ON-OFF/Reset button

and indicator light

Delayed start indicator light

Refined Salt and Rinse Aid

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

Follow the instructions given on the packaging.

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard

or very hard.

(Follow the instructions given on the packaging.)

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID* indicator lights will remain lit.

Measuring out the refined salt

The use of salt prevents the formation of LIMESCALE on the

dishes and on the machine's functional components.

• It is important that the salt dispenser be never empty.

• It is important to set the water hardness.

The salt dispenser is located in the lower part of the dishwasher

(see Description)

and should be filled:

• When the LOW RINSE AID indicator light in the control panel

is lit *;

• When the green float* on the cap of the salt dispenser is no

longer visible.

• See autonomy in the water hardness table.

1. Remove the lower rack and unscrew the

container cap (anticlockwise).

2. Only the first time you do this: fill the water

dispenser up to the edge.

3. Position the funnel

(see figure)

and

fill the salt container right up to its edge

(approximately 1 kg); it is not unusual for a

little water to leak out.

4. Remove the funnel and wipe any salt residue away from the

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Make sure the cap is screwed on tightly, so that no detergent can

get into the container during the wash cycle (this could damage

the water softener beyond repair).

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustment be based on the water hardness in your house. Ask

your local water supplier for this information. The factory setting

is for medium water hardness.

• Switch the dishwasher on using the On/Off button.

• Switch it off using the On/Off button

• Hold down button P for 5 seconds until you hear a beep.

• Switch it on using the On/Off button

• The current selection level number and salt indicator light flash.

• Press button P to select the desired hardness level

(see

hardness table).

• Switch it off using the On/Off button

• Setting is complete!

(°dH = hardness measured in German degrees - °f = hardness

measured in French degrees – mmol/l = millimoles per litre)

Measuring out the rinse aid

Rinse aid makes dish DRYING easier. The rinse aid dispenser

should be filled:

• When the LOW RINSE AID indicator light on the panel/display

is lit *;

• When the dark optical indicator* on the dispenser door “D”

becomes transparent.

1. Open the dispenser “D” by pressing and pulling up the tab

on the lid;

2. Carefully introduce the rinse aid as far as the maximum

reference notch in the filling space - avoid spilling it. If this

happens, clean the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

may want to adjust the quantity of rinse aid used.

• Switch the dishwasher on using the On/Off button.

• Switch it off using the On/Off button

• Press button P three times - a beep will be heard.

• Switch it on using the On/Off button

• The current selection level number and rinse aid indicator

light flash.

• Press button P to select the level of rinse aid quantity to be

supplied.

• Switch it off using the On/Off button

• Setting is complete!

If the rinse aid level is set to ZERO, the rinse aid will not be

supplied and the low rinse aid indicator light will not be lit if you

run out of it.

A maximum of 4 levels can be set according to the dishwasher

model. The factory setting is for a medium level.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes,

set a high number (3-4).

Water Hardness Table

Average autonomy

salt dispenser with 1

wash cycle per day

level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1.1 - 2 5 months

3 12 - 17 21 - 30 2.1 - 3 3 months

4 17 - 34 31 - 60 3.1 - 6 2 months

34 - 50 61 - 90 6.1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the use

of salt. A setting of 5 may increase cycle duration.

* Only available in selected models.

Loading the racks

Tips

Before loading the racks, remove all food residues from the

crockery and empty liquids from glasses and containers. No

preventive rinsing is needed under running water.

Arrange the crockery so that it is held in place firmly and does

not tip over; and arrange the containers with the openings facing

downwards and the concave/convex parts placed obliquely,

thus allowing the water to reach every surface and flow freely.

Make sure that the lids, handles, trays and frying pans do not

prevent the spray arms from rotating. Place any small items in

the cutlery basket.

Since plastic dishes and non-stick frying pans usually retain more

water drops, their drying will be not so good as that of ceramic

or stainless-steel dishes.

Lightweight items such as plastic containers should be placed in

the upper rack and arranged so that they cannot move.

After loading the appliance, make sure that the spray arms can

rotate freely.

Lower rack

The lower rack can hold pans, lids, dishes, salad bowls, cutlery

etc. Large plates and lids should ideally be placed at the sides.

Very soiled dishes and pans should be placed in the lower rack

because in this sector the water sprays are stronger and allow

a higher washing performance.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging dishes

or in a horizontal position (lower) to load pans and salad bowls

easily.

Cutlery basket

The basket is equipped with top grilles for improved cutlery ar-

rangement. The cutlery basket should be positioned only at the

front of the lower rack

Upper rack

Load this rack with delicate and lightweight crockery such as

glasses, cups, saucers and shallow salad bowls.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging tea/

dessert saucers or in a lower position to load bowls and food

containers.

* Only available in selected models.

The upper rack can be adjusted for height based on requirements:

high position to place bulky crockery in the lower rack and low

position to make the most of the tip-up compartments/sectors

by creating more space upwards.

Tip-up compartments with adjustable position*

The side tip-up compartments can be positioned at three different

heights to optimize the arrangement of crockery inside the rack.

Wine glasses can be placed safely

in the tip-up compartments by

inserting the stem of each glass

into the corresponding slots. For

optimum drying results incline the

tip-up compartments more. To

change the inclination, pull up the

tip-up compartment, slide it slightly

and position it as you wish.

Cutlery tray*

Some dishwasher models are fitted with a sliding tray which

can be used to hold serving utensils or small cups. For optimum

washing performance avoid positioning bulky crockery directly

below the tray. The cutlery tray can be removed

(see Figure).

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack

may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE

RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

If the rack is equipped with a Lift-Up device*

(see figure)

, lift

it up by holding its sides. To restore the lower position, press

the levers (A) at the sides of the rack and follow the rack down.

Unsuitable crockery

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique

crockery. Their decorations are not resistant.

• Parts in synthetic material which do not withstand high

temperatures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces

can change and fade during the washing process. Some types

of glass (e.g. crystal objects) can become opaque after a number

of wash cycles too.

Damage to glass and crockery

Caused by:

• Type of glass and glass production process.

• Chemical composition of detergent.

• Water temperature of rinse cycle.

Tips:

• Only use glasses and porcelain guaranteed by the

manufacturer as dishwasher safe.

• Use a delicate detergent suitable for crockery.

• Collect glasses and cutlery from the dishwasher as soon as

the wash cycle is over.

*Only available in selected models with different numbers and

positions.

Detergent and

dishwasher use

* Only available in selected models.

Measuring out the detergent

A good wash result also depends on the correct

amount of detergent being used. Exceeding the stated

amount does not result in a more effective wash and

increases environmental pollution.

Based on how soiled the items are, the amount can be

adjusted to individual cases using powder or liquid

detergent.

In the case of normally soiled items, use approximately either

35 gr (powder detergent) or 35 ml (liquid detergent). If tablets

are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only.

Place the amount of detergent for pre-washing directly inside

the tub.

1. When measuring out the detergent refer to the Table of wash

cycles to add the proper quantity. Compartment B comprises a

level showing the maximum quantity of liquid or powder detergent

that can be added to each cycle.

2. Remove detergent residues from the edges of the dispenser

and close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until

the closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS

option, because it adjusts the cycle so that the best washing and

drying results are always achieved.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residues

remaining in the machine after the cycle has ended.

To achieve the best washing and drying results, the combined

use of detergent, rinse aid liquid and refined salt is required.

We recommend using detergents that do not contain

phosphates or chlorine, as these products are harmful

to the environment.

Starting the dishwasher

1. Turn the water tap on.

2. Open the door and press ON-OFF button: the ON/OFF indicator

lights, options and the display come on.

3. Measure out the detergent.

(see adjacent information).

4. Load the racks

(see Loading the racks)

5. Select the wash cycle in accordance with the type of crockery

and its soil level

(see table of wash cycles)

by pressing the P

button.

6. Select the wash options

(see Special wash cycles and

options)

7. Start the wash cycle by shutting the door.

8. The end of the wash cycle is indicated by beeps and by the

flashing of the wash cycle number on the display. Open the door,

switch off the appliance by pressing the ON/OFF button, shut off

the water tap and unplug the appliance from the electricity socket.

9. Wait for a few minutes before removing the crockery, in order

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during

certain extended periods of inactivity, in order to

minimise electricity consumption.

AUTO WASH CYCLES*:some models of dishwashers are

equipped with a special sensor which can be used to assess the

level of soiling and automatically setting the most efficient and

economic wash cycle accordingly.

The duration of the Auto wash cycles may vary due to the

operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process,

it is possible to change the cycle, provided that it has only just

begun: open the door taking care to avoid the escaping steam,

by pressing and holding the ON/OFF button, the machine will

switch off. Switch the machine back on using the ON/OFF button

and select the new wash cycle and any options desired; start the

cycle by closing the door.

Adding extra crockery

Without switching off the machine, open the door, taking care

to avoid the escaping steam, and place the crockery inside the

dishwasher. Shut the door and the cycle will begin from the point

at which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it was

interrupted once the door has been shut or the electricity supply

is restored.

Wash cycles

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.

Based on the different conditions of use, the wash-cycle duration and data can change.

The number and type of wash cycles and options may vary depending on the dishwasher model.

Wash Cycle Drying Options

Wash Cycle

Duration

Water

Consumption (l/

cycle)

Energy

Consumption

(kWh/cycle)

1. Eco Yes

Delayed start 03:10’ 11 1,03

2. Auto Intensive Yes

Delayed start 02:00’ - 03:10’ 14 - 15,5 1,5 - 1,8

3. Auto Normal Yes

Delayed start 01:30’ - 02:30’ 14,5 - 16 1,2 - 1,35

4. Delicate Yes

Delayed start 01:40’ 11 1,1

5. Rapid 40’ No

Delayed start 00:40’ 9,5 0,9

6. Prewash No

Delayed start 00:12’ 4,5 0,01

7. Half Load Yes

Delayed start

01:20’ 12,0 1,15

8. Extra No

Delayed start 01:00’ 11 n.a.

Instructions on wash-cycle selection and detergent dosage:

1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal

soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.

27 gr/ml + 6 gr/ml** – 1 Tab

(**Quantity of pre-washing detergent)

2. Heavily soiled dishes and pans (not to be used for delicate items). 30 gr/ml – 1 Tab

3. Normally soiled pans and dishes. 27 gr/ml + 6 gr/ml** – 1 Tab

4. Cycle for delicate items, which are more sensitive to high temperatures 30 gr/ml – 1 Tab

5. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab

6. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.

7. Ideal cycle for small loads of crockery with a normal soil level. 25 gr/ml - 1 Tab

8. Large crockery.

(Do not use on delicate items)

30 gr/ml – 1 Tab

Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W

n.a. = non applicable

Special wash cycles

and Options

* Only available in selected models.

Notes:

Optimum performance levels when using the “Rapid 40’" cycle

can be achieved by respecting the specified number of place

settings.

To reduce consumption, only run the dishwasher when it is full.

Note for Test Laboratories: for information on comparative EN

testing conditions, please send an email to the following address:

[email protected]

Wash options

If an option is not compatible with the selected wash cycle

(see table of wash cycles), the corresponding LED flashes

rapidly 3 times and beeps will sound.

Delayed start

The start of the wash cycle may be delayed for a

period of time between 1 and 12 hours.

1. Press the DELAYED START button: the corresponding

symbol appears on the display; each time you press the

button, the time (1h, 2h, etc. up to max. 12h) from the start of

the selected wash cycle will be increased.

2. Select the cycle and close the door: the timer will begin

counting down;

3. Once this time has elapsed, the indicator light switches off

and the wash cycle begins.

To adjust the delay time and select a smaller period of time,

press the DELAYED START button. To cancel it, press the

button repeatedly until the selected delayed start indicator

light switches off. The wash cycle will start automatically as

soon as the door is shut.

The Delayed Start function cannot be set once a wash cycle

has been started.

Wash cycle EXTRA

EXTRA makes it possible to carry out a heavy-duty wash

cycle of large crockery up to a max height of 53cm:

baking pans, oven grids, dripping pans, hob grids, large

saucepans, serving dishes, pizza dishes, stainless-steel

hood filters.

Remove the upper rack to load bulky crockery.

Release the two locks (right

and left) and pull out the rack.

When the upper rack is fitted,

the locks must be always

closed.

In order for the water to reach the crockery everywhere,

arrange it as shown in the Figure.

The cycle can also be used on large delicate crockery using

the option Extra Light

(see Wash Options).

Do not start the dishwasher without the upper rack using

wash cycles other than EXTRA.

To carry out the wash cycle Extra and Extra with the

Light* option pour the detergent directly into the tub and

not into the dispenser.

Care and maintenance

Shutting off the water and electricity

supplies

• Turn off the water tap after every wash cycle to avoid leaks.

• Always unplug the appliance when cleaning it and when

performing maintenance work.

Cleaning the dishwasher

• The external surfaces of the machine and the control panel

can be cleaned using a non-abrasive cloth which has been

dampened with water. Do not use solvents or abrasive

products.

• Any marks on the inside of the appliance may be removed

using a cloth dampened with water and a little vinegar.

Preventing unpleasant odours

• Always keep the door of the appliance ajar in order to avoid

moisture from forming and being trapped inside the machine.

• Clean the seals around the door and detergent dispensers

regularly using a damp sponge. This will avoid food becoming

trapped in the seals, which is the main cause behind the

formation of unpleasant odours.

Cleaning the spray arms

Food residue may become encrusted onto the sprayer arms

and block the holes used to spray the water. It is therefore

recommended that you check the arms from time to time and

clean them with a small non-metallic brush.

The two spray arms may both be removed.

To remove the upper spray arm,

turn the plastic locking ring in an

anti-clockwise direction. The upper

sprayer arm should be replaced

so that the side with the greater

number of holes is facing upwards.

The lower spray arm can be removed

by pressing on the side tabs and

pulling it upwards.

Cleaning the water inlet hose*

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free

of impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked

and damage the dishwasher.

Clean the water inlet filter at the tap outlet regularly.

- Turn off the water tap.

- Unscrew the end of the water inlet hose, remove the filter and

clean it carefully under running water.

- Re-place the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food

residues from the washing water and then recirculate the water.

They must be cleaned if you wish to achieve the best results in

every wash.

Clean the filters regularly.

The dishwasher must not be used without filters or if the filter

is loose.

• After several washes, check the filter assembly and if necessary

clean it thoroughly under running water, using a non-metallic

brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and

pull it out

(fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the

side flaps

(fig. 2);

3. Slide out the stainless-steel plate filter A.

(fig. 3).

4. Inspect the trap and remove any food residues. NEVER

REMOVE the wash-cycle pump protection

(black detail) (fig.4).

After cleaning the filters, re-place the filter assembly and fix it

in position correctly; this is essential for maintaining the efficient

operation of the dishwasher.

Leaving the machine unused for extended

periods

• Disconnect the appliance from the electricity supply and shut

off the water tap.

• Leave the door of the appliance ajar.

• When you return, run a wash cycle when the dishwasher is

empty.

* Only available in selected models.

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

* Only available in selected models.

Problem: Possible causes / Solutions:

The dishwasher does not start

or cannot be controlled.

• The water supply tap is not turned on.

• Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately

one minute and reset the wash cycle.

• The appliance has not been plugged in properly or another electricity socket should be used.

• The dishwasher door has not been closed properly.

The door won’t close.

• Make sure that the racks were inserted all the way.

• The lock was released. Strongly push the door until a “clacking” noise is heard.

No water drain out of the

dishwasher.

• The wash cycle has not nished yet.

• The water drain hose is bent

(see Installation).

• The drain duct is clogged up.

• The lter is clogged up with food residues.

• Check the height of the drain hose.

The dishwasher makes

excessive noise.

• The dishes are rattling against each other or against the spray arms. Place the dishes

properly and make sure the spray arms can rotate freely.

• Too much foam: the detergent has not been measured out correctly or it is not suitable for use

in dishwashers.

(See Detergent and dishwasher use.)

Do not prewash the dishes by hand.

The dishes and glasses are

covered in a white lm or

limescale deposits.

• No rened salt.

• Water hardness adjustment is not suitable: increase the relevant values.

(See Rened Salt

and Rinse Aid.)

• The salt and rinse-aid dispenser cap has not been closed properly.

• The rinse aid has been used up or the dosage is too low.

The dishes and glasses are

streaked or have a bluish

tinge.

• The rinse aid dosage is too high.

The crockery has not been

dried properly.

• A wash cycle without a drying programme has been selected.

• The rinse aid has been used up.

(See Rened Salt and Rinse Aid.)

• The rinse aid dispenser setting is not suitable.

• The crockery is made from non-stick material or plastic; the presence of water drops is

normal.

The dishes are not clean. • The crockery has not been arranged properly.

• The spray arms cannot rotate freely, being hindered by the dishes.

• The wash cycle is too gentle

(see Wash Cycles).

• Too much foam: the detergent has not been measured out correctly or it is not suitable for use

in dishwashers.

(See Detergent and dishwasher use.)

• The lid on the rinse aid compartment has not been closed correctly.

• The lter is dirty or clogged up

(see Care and maintenance.)

• The rened salt level is low

(See Rened Salt and Rinse Aid.)

• Make sure that the height of the dishes is compatible with the rack adjustment.

• The holes in the sprayer arms are clogged up.

(See Care and maintenance.)

The dishwasher won’t load

any water.

It is blocked with ashing lights.

• There is no water in the mains supply or the tap is shut off.

• The water inlet hose is bent

(see Installation).

• The lters are clogged up: they need cleaning.

(See Care and maintenance.)

• The drain duct is clogged up: it needs cleaning.

• After checking and cleaning, switch the dishwasher on and off and start a new wash cycle.

• If the problem persists, turn off the water tap, remove the plug and call the Service Centre.

Installation

En cas de déménagement, transporter l’appareil

verticalement ; si besoin est, l’incliner sur le dos.

Raccordements hydrauliques

L’adaptation des installations de plomberie de

l’installation doit être effectuée par du personnel qualifié

Les tuyaux d’amenée et d’évacuation de l’eau peuvent être

orientés vers la droite ou vers la gauche pour simplifier

l’installation.

Attention à ce que les tuyaux d’arrivée et d’évacuation ne

soient pas pliés ou écrasés par le lave-vaisselle.

Raccord du tuyau d’amenée de l’eau

• Auneprised'eaufiletée3/4”gazfroideouchaude(max.

60°C).

• Fairecoulerl'eaujusqu'àcequ'ellesoitlimpide.

• Bienvisserletuyaud'évacuationetouvrirlerobinet.

Si la longueur du tuyau d’amenée ne suffit pas, s’adresser

à un magasin spécialisé ou à un technicien agréé

(voir

Assistance)

La pression de l’eau doit être comprise entre les valeurs

citées dans le tableau des Caractéristiques techniques,

autrement le lave-vaisselle risque de ne pas fonctionner

correctement.

Faireattentionàcequ'iln'yaitnipliuresniétranglements

au niveau du tuyau.

Raccordement du tuyau d’évacuation de

l’eau

Raccorder le tuyau d’évacuation à une conduite d’évacuation

ayantaumoins2cmdediamètre.(A)

Leraccorddutuyaud’évacuationdoitêtreplacéentre40et

80 cm au-dessus du sol ou du plan d’appui du lave-vaisselle.

Avant de raccorder le tuyau d’évacuation de l’eau au siphon

del’évier,retirerlebouchonenplastique(B).

Sécurité anti-fuite

Pour éviter tout risque d’inondation, le lave-vaisselle :

- est équipé d’un dispositif qui coupe l’arrivée de l’eau en

cas d’anomalie ou de fuite à l’intérieur de l’appareil.

Quelques modèles sont aussi équipés d’un dispositif de

sécurité supplémentaire New Acqua Stop*, qui garantit

contretoutrisqued'inondationmêmeencasderupturedu

tuyau d’amenée de l’eau.

ATTENTION : TENSION DANGEREUSE !

Il ne faut en aucun cas couper le tuyau d’amenée de l’eau

car il contient des parties sous tension.

Raccordement électrique

Avantdebrancherlafichedanslaprisedecourant,s'assurer

que :

• lapriseest bien reliée à la terre et est conforme aux

réglementations en vigueur ;

• lapriseestbienapteàsupporterlapuissancemaximale

de la machine reportée sur la plaquette signalétique fixée

à la contre-porte

(voirchapitreDescriptiondulave-vaisselle);

• latensiond’alimentationestbien comprise entre les

valeurs figurant sur la plaque signalétique de la contre-

porte ;

• lapriseestbiencompatibleaveclafichedel’appareil.

Autrement, faire remplacer la fiche par un technicien

agréé

(voirAssistance)

; n’utiliser ni rallonges ni prises

multiples.

Après installation de l’appareil, le cordon d’alimentation

électrique et la prise de courant doivent être facilement

accessibles.

Le câble ne doit être ni plié ni trop écrasé.

Afin d’éviter tout danger, faire changer le cordon

d’alimentation abîmé, par le fabricant ou par son service

après-vente.

(VoirAssistance)

Nous déclinons toute responsabilité en cas de non-

respect des normes énumérées ci-dessus.

Mise en place et mise à niveau

1. Installer le lave-vaisselle sur un sol plat et rigide.

Compenser les irrégularités en vissant ou en dévissant les

piedsavantjusqu'àcequel'horizontalitédel’appareilsoit

parfaite. Une bonne horizontalité garantit la stabilité de

l’appareil et supprime tout risque de bruits et de vibrations.

2.Avantd'encastrerlelave-vaisselle,collerlerubanadhésif

transparent* sous le plan en bois pour le protéger contre le

risque de formation de condensation.

3.Installerlelave-vaisselledemanièreàcequelescôtéset

laparoiarrièretouchentauxmeublesadjacentsouaumur.

L’appareil peut être encastré sous un plan de travail continu*

(voirfeuilledemontage)

4*. Pour régler la hauteur du pied arrière, agir sur la douille

rouge à six pans située dans la partie avant du lave-

vaisselle, en bas et au milieu, à l’aide d’une clé mâle à six

pans, ouverture 8 mm. Tourner dans le sens des aiguilles

d’une montre pour augmenter la hauteur et dans le sens

inverse pour la diminuer.

(voirfeuilled’instructionsjointeà

la documentation)

MIN 40 cm

MAX 80 cm

* Présent uniquement sur certains modèles.

Caractéristiques techniques

Dimensions

largeur 60 cm

hauteur 85 cm

profondeur 60 cm

Capacité 13 couverts standard

Pression eau

d’alimentation

0,05 ÷ 1 MPa (0,5 ÷ 10 bar)

7,25 – 145 psi

Tension

d’alimentation

Voir étiquette des caractéristiques

Puissance totale

absorbée

Voir étiquette des caractéristiques

Fusible Voir étiquette des caractéristiques

Cet appareil est conforme aux

Directives Communautaires suivantes:

- 2006/95/EC (Basse Tension)

- 2004/108/EC (Compatibilité

Electromagnétique)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Etiquetage)

-2012/19/EU (DEEE)

Cet électroménager dispose de signaux sonores/bips

(selon

le modèle de lave-vaisselle

) qui signalent que la commande

a été activée: allumage, fin de cycle etc..

Tous les symboles/voyants/led lumineux du bandeau de

commande/afficheur peuvent avoir des couleurs différentes,

flasher ou être en fixe.

(selonlemodèledelave-vaisselle)

Affichage d'informations utiles concernant le type de cycle

sélectionné, la phase de lavage/séchage, le temps résiduel,

la température etc.... etc...

Conseils pour le premier lavage

Aprèsl'installation,retirerlescalesplacéessouslespaniers

ainsi que les élastiques de fixation du panier supérieur

(si

prévus).

Réglages de l'adoucisseur d'eau

Avant de lancer le premier lavage, sélectionner le ni-

veau de dureté del'eauduréseau.

(voirchapitreProduit

de rinçage et sel régénérant))

Lors de son premier chargement, il faut d'abord remplir

l'adoucisseurd'eaupuisintroduireenviron1kgdesel.Il

estnormalquedel'eaudéborde..

Fairedémarreruncycledelavagetoutdesuiteaprès.

N’utiliser que du sel spécial lave-vaisselle.

Après remplissage du réservoir, le voyant SEL*s'éteint.

L'absencederemplissagedu réservoir à sel peut

endommager l’adoucisseur d’eau et l’élément chauffant.

* Présent uniquement sur certains modèles.

Description de l’appareil

*** Uniquement pour modèles « tout intégrable » * Présent uniquement sur certains modèles.

Le nombre et les types de programmes varient selon le modèle de lave-vaisselle.

Vue d’ensemble

1. Panier supérieur

2. Brasdelavagesupérieur

3. Clayettes rabattables

4. Réglage hauteur du panier

5. Panier inférieur

6. Brasdelavageinférieur

7. Filtrelavage

8. Réservoir à sel

9. Bacsàproduitdelavageetréservoiràproduit

de rinçage

10. Plaque signalétique

11. Bandeaudecommandes***

Tableau de bord

Touche sélection de

programme

Voyant sel

Voyant produit de rinçage

Indicateur lumineux

numéro programme et

temps restant

Touche Départ différé

Touche et voyant

On-Off/Reset

Voyant Départ différé

Sel régénérant et

Produit de rinçage

N’utiliser que des produits de lavage spéciaux lave-

vaisselle. N’utilisez pas de sel alimentaire ou industriel.

Se conformer aux instructions reportées sur l’emballage.

En cas d’utilisation d’un produit multifonction, nous

conseillons malgré tout d’ajouter du sel, surtout en cas d’eau

dure ou très dure.

(Seconformerauxinstructionsreportéessur

l’emballage).

Faute d’ajouter du sel ou du produit de rinçage, il est

normal que les voyants SEL* et PRODUIT DE RINCAGE*

restent allumés.

Charger le sel régénérant

L'utilisationdeselévitelaformationdeCALCAIREsurlavaisselle

et sur les composants fonctionnels du lave-vaisselle.

•Ilestimportantqueleréservoiràselnesoitjamaisvide.

•Ilestimportantdeprocéderauréglagedeladuretédel'eau.

Le réservoir à sel qui se trouve dans la partie inférieure du lave-

vaisselle

(voirDescription)

doit être rempli :

•quandlevoyantSEL* du bandeau s’allume ;

•quandleflotteurvert* qui se trouve sur le couvercle du sel

n'estplusvisible.

•voirautonomiedansletableaudeduretédel'eau.

1. Sortir le panier inférieur et dévisser le

couvercle du réservoir dans le sens inverse

des aiguilles d’une montre.

2. Lors de la première mise en service :

remplir le réservoir d’eau à ras bord.

3.Utiliserl’entonnoir

(voirfigure)

pour remplir

leréservoirde sel jusqu’aubord(1 kg

environ);ilesttoutàfaitnormalquedel'eaudéborde.

4.Enleverl’entonnoir,éliminerlesrésidusdeselsurlefiletage.

Avant de revisser le couvercle, il faut le rincer à l’eau courante.

Nous conseillons d’effectuer cette opération à chaque

chargement de sel.

Fermersoigneusementlecouverclepouréviterqueduproduit

de lavage pénètre à l’intérieur du réservoir pendant le lavage

(celapourraitendommagerirrémédiablementl'adoucisseur).

Encasderajoutdesel,nousconseillonsd'effectuercette

opération avant de démarrer le lavage.

Réglage dureté de l’eau

Pourobtenirun fonctionnementparfaitde l'adoucisseuranti-

calcaire, il faut absolument procéder à un réglage selon la dureté

del'eaudel'appartement.Serenseignerauprèsdel’organisme

distributeur de l’eau. La valeur sélectionnée correspond à une

dureté moyenne.

•AppuyersurlatoucheON/OFFpourmettrelelave-vaisselle

sous tension

•AppuyersurlatoucheON/OFFpouréteindre

•GarderlatouchePenfoncéependant5secondes,jusqu'au

bip.

•AppuyersurlatoucheON/OFFpourallumer

•Lenuméroduniveaudesélectioncourantetlevoyantsel

clignotent.

•AppuyersurlatoucheP pour sélectionner le niveau de dureté

(voirtableaudureté).

•AppuyersurlatoucheON/OFFpouréteindre

•Réglageeffectué!

(°dH=duretéendegrésallemands-°fH=duretéendegrés

français-mmol/l=millimole/litre)

Charger le produit de rinçage

LeproduitderinçageaideauSÉCHAGEdelavaisselle.Ilfaut

remplir le réservoir à produit de rinçage :

• quandlevoyantPRODUITDERINÇAGE*s'allumesurle

bandeau/écran.

• quandl'indicateuroptique* situé sur le couvercle du réservoir

« D », passe de foncé à transparent.

1.Ouvrirle réservoir « D » en poussant et en soulevant la

languette sur le couvercle ;

2.Introduirele produit de rinçageavec précaution jusqu'au

niveaumaximaldel'ouverturederemplissageenévitanttout

débordement.Sicela se produit,nettoyeraussitôt avec un

chiffon sec.

3.Fermerlecouverclejusqu'audéclic.

Ne JAMAIS verser le liquide de rinçage directement à

l'intérieur de la cuve.

Régler la dose de produit de rinçage

Si le résultat du séchage n’est pas satisfaisant, le dosage du

produit de rinçage peut être réglé.

•AppuyersurlatoucheON/OFFpourmettrelelave-vaisselle

sous tension

•AppuyersurlatoucheON/OFFpouréteindre

•Appuyer3foisdesuitesurlatouchePjusqu'aubip.

•AppuyersurlatoucheON/OFFpourallumer

•Lenuméroduniveaudesélectioncourantetlevoyantproduit

de rinçage clignotent.

•Appuyersur la toucheP pour sélectionner la quantité de

produit de rinçage devant être débitée.

•AppuyersurlatoucheON/OFFpouréteindre

•Réglageeffectué!

Le niveau de dosage du produit de rinçage peut être réglé sur

ZÉRO,danscecas,leproduitderinçageneserapasdébitéet

levoyantproduitderinçagenes'allumerapasencasd'absence

de ce dernier.

Possibilitédesélectionnerjusqu'à4niveauxmaximumselonle

modèle de lave-vaisselle. La valeur sélectionnée correspond à

un niveau moyen.

• silavaisselleprésentedestracesbleuâtres,réglersurdes

chiffresplusbas(1-2).

• s’ilyadesgouttesd’eauoudestachesdecalcairesurla

vaisselle,réglersurdeschiffresplusélevés(3-4).

Tableau de dureté de l’eau

Autonomie moyenne

réservoir à sel avec 1

lavage par jour

niveau

°dH °fH mmol/l mois

1 0 - 6 0 - 10 0 - 1 7 mois

2 6 - 11 11 - 20 1,1 - 2 5 mois

3 12 - 17 21 - 30 2,1 - 3 3 mois

4 17 - 34 31 - 60 3,1 - 6 2 mois

34 - 50 61 - 90 6,1 - 9 2/3 semaines

De 0°f à 10°f nous vous conseillons de ne pas utiliser de sel.

* La sélection 5 peut prolonger la durée.

* Présent uniquement sur certains modèles.

La page charge ...

Indesit DIFP 68B1 EU Mode d'emploi

Marque: Indesit

Modèle: DIFP 68B1 EU

Catégorie: Lave-vaisselle

Taper: Mode d'emploi

Ce manuel convient également à

EDIFP 68B1 A EU

Télécharger le PDF

rapport

dans d''autres langues

English: Indesit DIFP 68B1 EU User guide

Indesit DIFP 68B1 EU Mode d'emploi

Ce manuel convient également à

Indesit DIFP 68B1 EU Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents