WIKA MH-1 Mode d'emploi

Operating instructions

Betriebsanleitung

Mode d‘emploi

Manual de instrucciones

EN

DE

FR

ES

Druckmessumformer, Typ MH-1

Pressure transmitter, model MH-1

Examples / Beispiele / Exemples / Ejemplos

Transmetteur de pression, type MH-1

Transmisor de presión, modelo MH-1

2

2009211.08 10/2017 EN/DE/FR/ES

WIKA operating instructions pressure transmitter, model MH-1

EN

DE

FR

ES

©04/2005 WIKA Alexander Wiegand SE & Co. KG

WIKA

®

is a registered trademark in various countries.

WIKA

®

ist eine geschützte Marke in verschiedenen Ländern.

Prior to starting any work, read the operating instructions!

Keep for later use!

Vor Beginn aller Arbeiten Betriebsanleitung lesen!

Zum späteren Gebrauch aufbewahren!

Lire le mode d‘emploi avant de commencer toute opération !

A conserver pour une utilisation ultérieure !

¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!

¡Guardar el manual para una eventual consulta!

Betriebsanleitung Typ MH-1

Seite 19 - 34

Operating instructions model MH-1

Page 3 - 18

Mode d‘emploi type MH-1

Page 35 - 50

Manual de instrucciones modelo MH-1

Page 51 - 67

3

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

Contents

1. General information 4

2. Design and function 5

3. Safety 6

4. Transport, packaging and storage 9

5. Commissioning, operation 10

6. Faults 12

7. Maintenance and cleaning 14

8. Dismounting, return and disposal 15

9. Specifications 16

Declarations of conformity can be found online at www.wika.com

Contents

4

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

1. General information

■

The pressure transmitter described in the operating instructions has been designed

and manufactured using state-of-the-art technology. All components are subject

to stringent quality and environmental criteria during production. Our management

systems are certified to ISO 9001 and ISO 14001.

■

These operating instructions contain important information on handling the

instrument. Working safely requires that all safety instructions and work instructions

are observed.

■

Observe the relevant local accident prevention regulations and general safety

regulations for the instrument's range of use.

■

The operating instructions are part of the product and must be kept in the immediate

vicinity of the instrument and readily accessible to skilled personnel at any time. Pass

the operating instructions on to the next operator or owner of the instrument.

■

Skilled personnel must have carefully read and understood the operating instructions

prior to beginning any work.

■

The general terms and conditions contained in the sales documentation shall apply.

■

Subject to technical modifications.

■

Further information:

- Internet address: www.wika.de / www.wika.com

- Relevant data sheet: PE 81.21

- Application consultant:

Tel.: +49 9372 132-8976

Fax: +49 9372 132-8008976

[email protected]

5

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES









2. Design and function

2.1 Overview



Electrical connection (depending on version)



Case



Process connection, spanner flats



Process connection, thread

2.2 CDS system

All process connections are available with the CDS system. The diameter of the

pressure port is reduced in order to counteract pressure spikes and cavitation.

2.3 Scope of delivery

Pressure transmitter

Cross-check scope of delivery with delivery note.

6

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

3. Safety

3.1 Explanation of symbols

WARNING!

... indicates a potentially dangerous situation that can result in serious

injury or death, if not avoided.

CAUTION!

... indicates a potentially dangerous situation that can result in light

injuries or damage to property or the environment, if not avoided.

Information

... points out useful tips, recommendations and information for efficient

and trouble-free operation.

3.2 Intended use

The pressure transmitter is used for measuring pressure. The measured pressure is

output as an electrical signal.

The pressure transmitter is intended for use in mobile hydraulic applications.

Only use the pressure transmitter in applications that lie within its technical performance

limits (e.g. max. ambient temperature, material compatibility, ...).

→ For performance limits see chapter 9 “Specifications”.

This instrument is not permitted to be used in hazardous areas!

The instrument has been designed and built solely for the intended use described here,

and may only be used accordingly.

The manufacturer shall not be liable for claims of any type based on operation contrary

to the intended use.

7

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

3. Safety

3.3 Improper use

WARNING!

Injuries through improper use

Improper use of the instrument can lead to hazardous situations and

injuries.

▶

Refrain from unauthorised modifications to the instrument.

▶

Do not use the instrument within hazardous areas.

Any use beyond or different to the intended use is considered as improper use.

3.4 Personnel qualification

Skilled personnel

Skilled personnel, authorised by the operator, are understood to be personnel who,

based on their technical training, knowledge of measurement and control technology

and on their experience and knowledge of country-specific regulations, current stand-

ards and directives, are capable of carrying out the work described and independently

recognising potential hazards.

3.5 Personal protective equipment

The personal protective equipment is designed to protect the skilled personnel from

hazards that could impair their safety or health during work. When carrying out the

various tasks on and with the instrument, the skilled personnel must wear personal

protective equipment.

Follow the instructions displayed in the work area regarding personal protective

equipment!

The requisite personal protective equipment must be provided by the operating company.

8

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

3.6 Labelling, safety marks

Product label



P# Product no.



S# Serial no.



Power supply



Output signal



Measuring range



Pin assignment



Coded date of manufacture















Transmitter MH-1

WIKA Alexander Wiegand SE & Co. KG 63911 Klingenberg Germany

9

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

4. Transport, packaging and storage

4.1 Transport

Check the pressure transmitter for any damage that may have been caused during

transportation.

Obvious damage must be reported immediately.

CAUTION!

Damage through improper transport

With improper transport, a high level of damage to property can occur.

▶

When unloading packed goods upon delivery as well as during

internal transport, proceed carefully and observe the symbols on the

packaging.

▶

With internal transport, observe the instructions in chapter 5.2

“Packaging and storage”.

4.2 Packaging and storage

Do not remove packaging until just before mounting.

Keep the packaging as it will provide optimum protection during transport (e.g. change

in installation site, sending for repair).

Permissible conditions at the place of storage:

■

Storage temperature: -40 ... +85 °C (-40 ... +185 °F)

■

Climate class (D) 1K4

■

Humidity: 67 % relative humidity (no condensation)

Avoid exposure to the following factors:

■

Direct sunlight or proximity to hot objects

■

Mechanical vibration, mechanical shock (putting it down hard)

■

Soot, vapour, dust and corrosive gases

■

Hazardous environments, flammable atmospheres

10

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

5. Commissioning, operation

5.1 Mounting the instrument

Requirements for mounting point

The mounting point must meet the following conditions:

■

Sufficient space for a safe electrical installation.

■

Permissible ambient and medium temperatures remain within the performance limits.

Consider possible restrictions on the ambient temperature range caused by mating

connector used.

→ For performance limits see chapter 9 “Specifications”

Sealing variants

Parallel threads

Seal the sealing face  with flat gasket, lens-type

sealing ring or WIKA profile sealing.

per EN 837 per DIN 3852-E



Tapered threads

Wrap threads with sealing material (e.g. PTFE

tape).

NPT, R and PT

Mounting the instrument

The max. torque depends on the mounting point (e.g. material and shape).

If you have any questions, please contact our application consultant.

→ For contact details see chapter 1 “General information” or the back

page of the operating instructions.

1. Seal the sealing face (→ see “Sealing variants”).

2

.

At the mounting point, screw the pressure transmitter in hand-tight.

3

.

Tighten with a torque spanner using the spanner flats.

11

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

5.2 Connecting the instrument to the electric system

Requirements for voltage supply

For power supply see product label.

This equipment is intended for operation with low voltages, which are separated from

the power supply or voltages of greater than AC 50 V or DC 120 V.

Preferably, a connection to an SELV circuit is recommended, or alternatively to circuits

with a different protective measure in accordance with IEC 60364-4-41.

Option for North America: The connection can be made in line with “class 2 circuits”

or “class 2 power units” in accordance with CEC (Canadian Electrical Code) or NEC

(National Electrical Code).

Requirements for electrical connection

■

Cable diameter matches the cable bushing of the mating connector.

■

Cable gland and seals of the mating connector are correctly seated.

■

With cable outlets, no humidity can ingress at the cable end.

Requirement for shielding and grounding

The pressure transmitter must be shielded and grounded in accordance with the

grounding concept of the plant.

Lines within a building which are longer than 30 m or leave the building (including lines

of outdoor installations) shall be shielded cables. The shield shall be connected to

ground at least on one side of the cable.

In individual cases equipment exposed to strong electromagnetic fields with frequen-

cies from 300 MHz to 700 MHz and 1 GHz to 2 GHz may show increased measuring

errors of up to 3.2 %. To avoid such influences on the measuring signal do not operate

the equipment in proximity to strong transmitting devices or radio installations, or use

suitable sheath current filters.

Connecting the instrument

1. Assemble the mating connector or cable outlet.

→ For pin assignment see product label

2

.

Establish the plug connection.

5. Commissioning, operation

12

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

6. Faults

CAUTION!

Physical injuries and damage to property and the environment

If faults cannot be eliminated by means of the listed measures, the

pressure transmitter must be taken out of operation immediately.

▶

Ensure that pressure or signal is no longer present and protect against

accidental commissioning.

▶

Contact the manufacturer.

▶

If a return is needed, please follow the instructions given in chapter 8.2

“Return”.

WARNING!

Physical injuries and damage to property and the environment

caused by hazardous media

Upon contact with hazardous media (e.g. oxygen, acetylene, flammable

or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,

radioactive), and also with refrigeration plants and compressors,

there is a danger of physical injuries and damage to property and the

environment.

▶

Should a failure occur, aggressive media with extremely high

temperature and under high pressure or vacuum may be present at the

instrument.

▶

For these media, in addition to all standard regulations, the appropriate

existing codes or regulations must also be followed.

▶

Wear the requisite protective equipment (see chapter 3.4 “Personal

protective equipment”).

For contact details see chapter 1 “General information” or the back page

of the operating instructions.

Faults Causes Measures

Plastic has faded UV irradiation No measures required

Discolouration is harmless

No output signal Cable break Check the continuity, and if

necessary exchange the cable

No/wrong power supply Rectify the power supply

No/wrong output signal Wiring error Rectify the wiring

13

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

Faults Causes Measures

Constant output signal upon

change in pressure

Mechanical overload caused

by overpressure

Replace instrument; if it

fails repeatedly, contact the

manufacturer.

Signal span too small/drops Mechanical overload caused

by overpressure

Replace instrument; if it

fails repeatedly, contact the

manufacturer.

Diaphragm damaged, e.g.

due to impacts, abrasive/

aggressive medium; corrosion

at diaphragm or process

connection; transmission

medium missing

Replace instrument; if it

fails repeatedly, contact the

manufacturer.

Sealing/sealing face damaged

or soiled, sealing does not

have a tight fit, threads

jammed

Clean the sealing/sealing

face, replace sealing if appli-

cable

Signal span varies/inaccurate EMC interference sources

in the environment; e.g.

frequency converter

Shield instrument; cable

shield; remove source of

interference

Operating temperature too

high/low

Lower/increase the

temperature

Instrument not grounded Ground the instrument

Strongly fluctuating pressure

of the process medium

Damping; consulting by the

manufacturer

Deviating zero point signal Operating temperature too

high/low

Lower/increase the

temperature

Other mounting position Adjust the zero point

Overpressure limit exceeded Reduce the pressure

If complaint is unjustified, we will charge you the complaint processing fees.

6. Faults

14

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

7. Maintenance and cleaning

7.1 Maintenance

This pressure transmitter is maintenance-free.

Repairs must only be carried out by the manufacturer.

7.2 Cleaning

CAUTION!

Unsuitable cleaning agents

Cleaning with unsuitable cleaning agents may damage the instrument and

the product label.

▶

Do not use any aggressive cleaning agents.

▶

Do not use any hard or pointed objects.

▶

Do not use any abrasive cloths or sponges.

Suitable cleaning agents

■

Water

■

Conventional dishwashing detergent

Cleaning the instrument

▶

Wipe the instrument surface using a soft, damp cloth.

15

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

8. Dismounting, return and disposal

8.1 Dismounting

WARNING!

Physical injuries and damage to property and the environment

caused by hazardous media

Upon contact with hazardous media (e.g. oxygen, acetylene, flammable

or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,

radioactive), and also with refrigeration plants and compressors, there

is a danger of physical injuries and damage to property and the environ-

ment.

▶

Should a failure occur, aggressive media with extremely high temper-

ature and under high pressure or vacuum may be present at the

instrument.

▶

Wear the requisite protective equipment (see chapter 3.5 “Personal

protective equipment”).

Dismounting the instrument

1. Disconnect the instrument from the mains.

2

.

Disconnect the electrical connection.

3

.

Unscrew the instrument with a spanner using the spanner flats.

8.2 Return

Strictly observe the following when shipping the instrument:

All instruments delivered to WIKA must be free from any kind of hazardous substances

(acids, bases, solutions, etc.) and must therefore be cleaned before being returned.

WARNING!

Physical injuries and damage to property and the environment

through residual media

Residual media in the dismounted instrument can result in a risk to

persons, the environment and equipment.

▶

With hazardous substances, include the material safety data sheet for

the corresponding medium.

▶

Clean the instrument, see chapter 7.2 “Cleaning”.

When returning the instrument, use the original packaging or a suitable transport

packaging.

Information on returns can be found under the heading “Service” on our

local website.

16

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

8.3 Disposal

Incorrect disposal can put the environment at risk.

Dispose of instrument components and packaging materials in an environmentally

compatible way and in accordance with the country-specific waste disposal regulations.

9. Specifications

9.1 Specifications

Specifications Model MH-1

Measuring range see product label

Overload safety 2 times

Vacuum-tight yes

Output signal see product label

Permissible load in Ω

■

Current output (2-wire) ≤ (power supply - 10 V) / 0.02 A

■

Voltage output (3-wire) > 5 kΩ

Power supply DC 10 ...30 V

Total current consumption < 30 mA

Response time (10 … 90 %) ≤ 5 ms

Accuracy

1)

see order documentation

Non-linearity (per EN 61298-2, BFSL) ≤ ±0.4 % of span

Permissible temperature ranges

■

Ambient -30 ... +85 °C

■

Medium -40 ... +125 °C

■

Storage -40 ... +85 °C

Climate class

■

Storage 1K4 (per EN 60721-3-1)

■

Transport 2K3 (per EN 60721-3-2)

■

Operation 4K4H (per EN 60721-3-5)

Vibration resistance 20 g (per IEC 60068-2-6, under resonance)

Shock resistance 500 g (per IEC 60068-2-27, mechanical)

IP ingress protection see “Electrical connections”

8. Dismounting, return ... / 9. Specifications

17

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

Specifications Model MH-1

Materials

■

Wetted parts Stainless steel

■

Non-wetted parts Stainless steel

Pin assignment see product label

Short-circuit resistance S+ vs. U-

Reverse polarity protection U+ vs. U-

Insulation voltage DC 500 V

1) Including non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error

per IEC 61298-2).

Process connections

Standard Thread size Sealings

FKM/FPM NBR

DIN 3852-E G ¼ A -40 ... +125 °C -30 ... +100 °C

ISO 6149-2 M14 x 1.5 -20 ... +125 °C -30 ... +120 °C

Electrical connections

Description Ingress

protection

1)

Circular connector M12 x 1, code A, 4-pin IP67

Angular connector DIN EN 175301-803 form C, 3-pin IP65

Cable outlet (0.5 / 1 / 2.5 m), 3-pin IP69K

1) The stated ingress protection only applies when plugged in using mating connectors that have the appropriate

ingress protection.

For further specifications see WIKA data sheet PE 81.21 and the order documentation.

9. Specifications

18

WIKA operating instructions, pressure transmitter, model MH-1

EN

2009211.08 10/2017 EN/DE/FR/ES

G ¼ A M14 x 1.5 ¼ NPT

Circular connector M12 x 1,

code A, 4-pin

Angular connector DIN EN

175301-803 form C, 3-pin

Cable outlet (0.5 / 1 / 2.5 m),

3-pin

Dimensions in mm

9. Specifications

19WIKA Betriebsanleitung Druckmessumformer, Typ MH-1

DE

2009211.08 10/2017 EN/DE/FR/ES

Inhalt

1. Allgemeines 20

2. Aufbau und Funktion 21

3. Sicherheit 22

4. Transport, Verpackung und Lagerung 25

5. Inbetriebnahme, Betrieb 26

6. Störungen 28

7. Wartung und Reinigung 30

8. Demontage, Rücksendung und Entsorgung 31

9. Technische Daten 32

Konformitätserklärungen finden Sie online unter www.wika.de

Inhalt

20

WIKA Betriebsanleitung Druckmessumformer, Typ MH-1

DE

2009211.08 10/2017 EN/DE/FR/ES

1. Allgemeines

■

Der in der Betriebsanleitung beschriebene Druckmessumformer wird nach dem

aktuellen Stand der Technik konstruiert und gefertigt. Alle Komponenten unterliegen

während der Fertigung strengen Qualitäts- und Umweltkriterien. Unsere Manage-

mentsysteme sind nach ISO 9001 und ISO 14001 zertifiziert.

■

Diese Betriebsanleitung gibt wichtige Hinweise zum Umgang mit dem Gerät. Voraus-

setzung für sicheres Arbeiten ist die Einhaltung aller angegebenen Sicherheitshin-

weise und Handlungsanweisungen.

■

Die für den Einsatzbereich des Gerätes geltenden örtlichen Unfallverhütungsvor-

schriften und allgemeinen Sicherheitsbestimmungen einhalten.

■

Die Betriebsanleitung ist Produktbestandteil und muss in unmittelbarer Nähe des

Gerätes für das Fachpersonal jederzeit zugänglich aufbewahrt werden. Betriebsan-

leitung an nachfolgende Benutzer oder Besitzer des Gerätes weitergeben.

■

Das Fachpersonal muss die Betriebsanleitung vor Beginn aller Arbeiten sorgfältig

durchgelesen und verstanden haben.

■

Es gelten die allgemeinen Geschäftsbedingungen in den Verkaufsunterlagen.

■

Technische Änderungen vorbehalten.

■

Weitere Informationen:

- Internet-Adresse: www.wika.de / www.wika.com

- Zugehöriges Datenblatt: PE 81.21

- Anwendungsberater:

Tel.: +49 9372 132-8976

Fax: +49 9372 132-8008976

[email protected]

La page charge ...

WIKA MH-1 Mode d'emploi

WIKA MH-1 Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents