HP t450 Digital Camcorder Manuel utilisateur

t450

Digital Camcorder

Caméscope numérique

Video Cámara Digital

Câmara Digital Video

Quick Start Guide

Guide de démarrage rapide

Guía rápida

Guia rápido de instruções

For the full version of the t450 product user manual go to: www.hp.com/support

Pour la version complète du manuel d’utilisateur du modèle t450, allez sur: www.hp.com/support

Para descargarse la versión completa del manual de instrucciones del modelo t450,

puede acceder al siguiente enlace: www.hp.com/support

Para a versão completa do manual da t450, visite: www.hp.com/support

English

Tour of Your Camcorder

Light

External Lens

Mount

Microphone

[Photo] Button

[Tele/Wide] Toggle

Optical Lens

Indicator

Tripod Socket

Battery/SD Card Cove

r

1

English

Tour of Your Camcorder

LCD Touch Panel

Mini USB Port

HDMI Port

[Power] Button

Speaker

LED Indicator

[Pause] Button

[Wireless] On/Off Button

[Record] Button

2

English

Getting Started

3

PC USB charging mode

Adapter charging mode

Step 1 :

Load the Battery

• Slide the latch and open the battery cover.

• Insert the battery correspondingly with the

correct polarity marks (+ or -).

• Close the battery cover firmly so that it

locks into place.

Step 2 :

Charge the Li-ion Battery

• Charge the battery fully before rst use.

• Under charging, the indicator will ash.

• It could take up to 5 hours to charge fully

with an adapter. Once complete, the

indicator will turn off automatically.

Note:

• A longer time is required via a PC USB.

Step 3 :

Insert the Memory Card

• Slide the latch and open the battery cover.

• Insert the SD card into the slot

until it locks properly.

• To remove the SD card, press inward to

release it and gently pull it out.

English

Record & Play WiVideo Installation

Power

• Flip out the LCD panel or press the

[ Power ]button.

• After idling for 3 minutes, the

device

will turn off automatically.

Record

• Press to take video.

Press again to stop.

Photo

• Press to take photo.

Tele/Wide

• T: Zoom in . • W: Zoom out.

Wireless

• Touch to enable/disable wireless

Use wireless to link with PC/

Mobile/Cloud.

Pause

• Press to pause recording.

Press again to continue.

Video/Photo

• Touch to switch between Video and

Photo.

• The default is in Video mode.

Menu

• Touch to turn the option menu on.

• Scroll left/right or touch to

change among three menu pages

(Video/Photo/Setting).

Playback

• Touch to go to the Playback Mode

View or delete the recorded  les.

2

3

4

1

Tap on the screen to display the icons.

5

7

8

9

English

WiVideo Installation

5

To support wireless connection between camcorder and PC/Laptop

(wireless enabled), WiVideo is a software that allows to view, manage video/

photo and live streaming taken from the camcorder wirelessly. Two versions

are provided:

Note: Streaming will remain on even LCD panel is closed.

Version 1 :

PC WiVideo Suite

• Power on the camcorder before connecting to

a PC/notebook.

• Use the camcorder (internal memory) to

install [ WiVideo Suite ] automatically onto the PC/

Laptop via USB cable when AutoRuns/AutoPlay is

activated.

• If AutoRuns/AutoPlay is not activated:

Go to [ My computer ]→ search [ WiVideo Suite ] for

installation.

Note:

• WiVideo is for Windows® only.

• When language on screen is not legible,

refer to troubleshooting page.

Mobile WiVideo App

• For iPhone/iPad:

Download and install WiVideo App from App Store onto

iPhone/iPad.

• For Android phone/tablet:

Download and install WiVideo App from Google Play onto

Android phone/tablet.

Version 2 :

App Store

Google Play

English

Wireless Mode To PC PC WiVideo Suite Function

Step 1: (Camcorder side)

• Press [ Wireless ] button → Seletct [ Wireless to PC

].

The screen will show the Wireless ID and Password.(The

default password is 0000. Wireless ID and password can

be edited on Setting menu.)

Step 2:(PC/Laptop side)

• Open the WiVideo software

• Click [ Detect Wireless Camera] button to search for

camcorder.

• Check [ Wireless ID ] and enter [ Password ] shown on

camera to the WiVideo window.

• Then, wireless to PC WiVideo Suite Mode is completed.

Note: Turn PC/Laptop wireless function on before use.

CD-675C-60675C

0000

WiFi to PC

WiFi ID

Password

CD-675C-60675C

0000

Wireless to PC

Wireless ID

Password

CD-675C-60675C

0000

6

English

PC WiVideo Suite Function

Active Mode Function

Wireless/USB

Manage Video and Photo Files

• Transfer les from camera to PC.

• Delete les in camera.

Wireless

Watch Live Video (wireless only)

• Watch live streaming on PC.

• Remote control the camera.

Wireless

Wireless Webcam for Skype/MSN (wireless only)

• Change video/audio setting of Skype/MSN.

• Select WiVideo Camera

(e.g. Skype)

USB

A ccount Setting (USB only)

• Set up social network account and save info to

camera via USB.

USB

Wireless Setup (USB only)

• Congure and synchronize wireless proles on camera

via USB.

• Name camera and create security password.

7

English

System AP/3G Mode Schema Page Note

iPhone/

iPad

w/o

AP

w/o

3G

Direct

9

1. Once Direct mode is on

original wireless will be turned off.

2. Remember to turn wireless

connection

back on once quit Direct mode.

w/3G Hotspot

(

Hotspot

)

10

1. Hotspot is limited or charged

by wireless mobile service

(3G/4G) provider.

2. Mobile system will be slower.

w/AP AP

10

1. Distance will affect the signal

strength.

Android

w/o AP Hotspot

(

Hotspot

)

11

1. Hotspot is limited or charged

by wireless mobile service

(3G/4G) provider.

2. Mobile system will be slower.

w/AP AP

11

1. Distance will affect the signal

strength.

AP : Wireless Access Point Hotspot : Mobile as Access Point

Wireless Modes to Mobile

8

English

Wireless to Mobile (iPhone/iPad)

Direct Mode

Step 1 : (Camcorder side)

• Press [ Wireless ] button

→ Select [ Wireless to Mobile ]

→ Select [ Direct Mode ]

→ The screen will show [ Wireless ID ] and

[ Password ].

Step 2 : (Mobile side)

• Go to [ Settings ] → [ Wireless ]

→ Select the same [ Wireless ID ] in Step 1 to

connect.

• Once the icon [

] shows, the Dierct Mode

connection is activated.

• Activate Mobile WiVideo App.

Note: It will take a while for [

] to show up.

9

Wireless to Mobile

wireless ID

Password

CD-675C-60675C

0000

English

Wireless to Mobile (iPhone/iPad)

10

[ Mobile Hotspot ]

[ AP ]

Step 1 : (Mobile side)

• Go to [ Settings ] → [ Wireless ]

→ Enable [ Personal Hotspot ]

Step 2 : (Camcorder side)

• Press [ Wireless ] button

→ Select [ Wireless to Mobile

] to scan

available AP

→ Connect camcorder to mobile Hotspot.

Step 1 : (Mobile side)

• Go to [ Settings ] → [ Wireless ]

→ Enable wireless and Select one available

AP.

Step 2 : (Camcorder side)

• Press [ Wireless ] → Select [ Wireless to

Mobile

] to scan available AP

→ Connect camcorder to the same selected

AP.

AP Mode

Mobile Hotspot Mode

English

Wireless to Mobile (Android)

11

AP Mode

Mobile Hotspot Mode

Step 1 : (Mobile side)

• Go to [ Settings ] → [ Wireless & network ]

→ Enable mobile Hotspot/AP

Note: Operation may vary, please refer to each

individual model.

Step 2 : (Camcorder side)

• Press [ Wireless ] button

→ Select [ Wireless to Mobile

] to scan

available AP

→ Connect camera to mobile Hotspot/AP.

Step 1 : (Mobile side)

• Go to [ Settings ] → [ Wireless & network ]

→ [ Wireless settings ] → Enable wireless and

Select one available AP.

Step 2 : (Camcorder side)

• Press [ Wireless ] button → [ Wireless to

Mobile

] to scan available AP

→ Connect camera to the same selected AP.

English

Tele(T)

• Zoom in

Wide(W)

• Zoom out

Video

• Press to take/stop video

Photo

• Press to take photo

View

• Watch live view on

camcorder

Album

• Playback/Delete les on

camcorder

Setup

• Manage settings on

camcorder

Mobile WiVideo Suite Function

12

English

Wireless Mode to Cloud

13

Ustream enables to broadcast live events freely. People can watch live video

broadcasting on PC and Mobile devices.

WiVideo Suite can guide you to setup Ustream automatically.

1. Set up Ustream account on PC

( PC internet connection is required)

Step 1 : Create an account

• Plug the USB cable between PC/Laptop

and camcorder

• Go to WiVideo Suite [ Account Setup ]

• Click [ Create A New Account ] and then ll up

the information requested step by step.

• Then click [ Sign Up ].

Step 2 : Save account information to

camera

• Enter Username/Password created in Step 1

• Then click [ Save ].

English

Wireless Mode to Cloud

14

Step 3 : Select one channel

WiVideo Suite creates one default channel.

You can create more channels on Ustream website.

• Select one channel for Ustream video broadcasting.

• For privacy, it is optional to enter password for the

selected channel.

Warning:

• Mobile device Ustream App cannot access private

channel.

• For private channel usage, refer to Ustream website for

detail information.

2. Prepare AP/Mobile Hotspot for Ustream broadcasting

AP(Access Point)

Mobile

or

English

Wireless Mode to Cloud

15

3. Broadcast live video on Ustream (Camcorder side)

4. Watch your Ustream broadcasting on PC/Mobile Device

www.ustream.tv

Ustream

Step 1 :

Press [ Wireless

] button

• Select [ Wireless to Cloud ]

Step 2 :

Log in your Ustream account

• Enter your username and password.

Step 3 :

Scan & Select Access Point

• The camcorder lists available Access Points.

• Select one for wireless connection.

The camcorder connects to Ustream server and

starts video streaming.

PC user:

• Go to Ustream website and enter

the username/channel

Mobile user:

• Download Ustream App from App Store/

Google Play

Launch App and enter the username/channel

Troubleshooting

16

Problem/Situation Remediation/Solution

Cannot power on the device/

The power turns off suddenly.

Check battery direction and press the [ Power Button ] to turn on.

Battery is weak or run out. Recharge the battery.

The les on the memory card

do not display smoothly when

the LCD shows the “!” mark.

“!” means the SD card is low-speed or contains corrupted les

Try to form at the card on the de vice not on PC.

The card has some problems and cannot be recognized.

Use another card.

Why do some of my indoor

photos look blurry and dark?

The device extends photo exposure time under low light/ indoor

condition. Keep the device (and the target subject) steady for several

seconds while taking photo.

When the device is connected

to the PC via USB cable.

The disk [ DV ] indicates the internal memory of the camera.

The disk [ Removable Disk ] indicates the SD card.

The disk [ WiVideo Suite ] indicates the built-in application.

Cannot connect to wireless

The password conguration does not match the AP.

The AP router or the computer wireless is not turned on.

Turn the AP router or your computer wireless on.

The device is not in the wireless network service area or the

wireless network service is affected by distance.

WiVideo Suite does not

install properly.

If the disk [ WiVideo Suite ] cannot be found, reboot

your computer.

WiVideo Suite language on

screen is not legible.

Refer to FAQ of the instructions from each original computer

manufacturer.

Français

Aperçu de votre caméscope

Éclairage

Monture d’objectif

externe

Microphone

Bouton [Photo]

Bouton [Tele/Wide

(télé-objectif/grand angle)]

Objectif

Voyant indicateur

Filetage pour trépied

Couvercle du logement de la

batterie/carte SD

1

Français

Aperçu de votre caméscope

Panneau LCD

Mini port USB

Port HDMI

Bouton [Power

(marche-arrêt)]

Haut-parleur

Voyant LED

Touche [Pause]

Bouton On/Off [Wireless]

Touche [Record

(enregistrement)]

2

Français

Guide de démarrage

3

Chargement via port USB de l’ordinateur

Chargement via adaptateur secteur

Étape 1 :

Chargez la batterie

• Faites glisser le verrou et ouvrez le logement

de la batterie.

• Insérez la batterie en respectant les marques

de polarité (+ ou -).

• Refermez fermement le logement de la

batterie.

Étape 2 :

Chargez la batterie Li-ion

• Chargez complètement la batterie avant la

première utilisation.

• Le voyant clignote pendant la charge.

• Le temps de charge complet avec

l’adaptateur secteur est de 5 heures. Une

fois la charge terminée, le voyant s’éteint

automatiquement.

NB:

• Le temps de charge est plus long via le port

USB d’un ordinateur.

Étape 3 :

Insérez la carte de mémoire

• Faites glisser le verrou et ouvrez le logement

de la batterie.

• Insérez la carte SD dans le logement jusqu’à

ce qu’elle se verrouille en place.

• Pour retirer la carte SD, appuyez dessus

pour la libérer et tirez délicatement dessus.

La page charge ...

HP t450 Digital Camcorder Manuel utilisateur

Ce manuel convient également à

HP t450 Digital Camcorder Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents