Maytag MHW6000XW2 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

Ce manuel convient également à

Care Guide
¢
et d' treti
FRONT-LOADINGAUTOMATICWASHER
LAVEUSEAUTOMATIOUEA CHARGEiVlENTFRONTAL
Para obtener acceso
al Manual de uso y cuidado
en espa_oJ, o para obtener
informaci6n adicional acerca
de su producto, visite:
www.maytag.com
If you have any problems or questions, visit us at www.maytag.com
Pour tout probleme ou question, consulter www.maytag.ca
W10254495A
W10254496A - SP
Designed to use only HE
High Efficiency detergents.
Congue pour I'utiHsation
d'un d_tergent haute
efficacit_ seulement.
Certified to Sanitize and to Reduce Allergens
Homologu& pour assainir et pour r&duire la pr&sence
d'allerg_nes
TABLEOFCONTENTS
WASHER SAFETY .................................................................... 2
ACCESSORIES ........................................................................ 3
CONTROL PANEL AND FEATURES ......................................... 4
CYCLE GUIDE .......................................................................... 6
USING YOUR WASHER ........................................................... 8
CYCLE STATUS LIGHTS ........................................................ 12
WASHER MAINTENANCE ...................................................... 13
TROUBLESHOOTING ............................................................ 16
WARRANTY ............................................................................ 23
ASSISTANCE OR SERVICE ..................................... Back Cover
TABLE DESNATIERES
ACCESSOIRES ........................................................................ 3
SFtCURITE_DE LA LAVEUSE .................................................. 24
TABLEAU DE COMMANDE ET CARACTE_RISTIQUES .......... 25
GUIDE DES PROGRAMMES .................................................. 27
UTILISATION DE LA LAVEUSE ............................................... 30
TFtMOINS LUMINEUX DE PROGRAMME .............................. 35
ENTRETIEN DE LA LAVEUSE ................................................ 36
DEPANNAGE .......................................................................... 39
GARANTI E.............................................................................. 47
ASSISTANCE OU SERVICE ........................... Couverture arriere
WASHER$ ETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be kifled or seriously injured if you don't
immediately follow instructions.
You can be kifled or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
2
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry=cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry=cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS iS
EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach intothe washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructionsfor grounding instructions.
this time.
SAVE THESE iNSTRUCTiONS
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
Customize your new washer and dryer with the following
genuine Whirlpool accessories. For more information on options
and ordering, contact your dealer, or visit: www.maytag.com.
15" Pedestal
Color matched pedestals raise
the washer and dryer to a more
comfortable working height.
The large drawer provides
convenient storage.
Available in matching colors.
Pi_destal de 15"
Les pi6destaux aux coloris assortis
sur61event la laveuse et la s6cheuse
pour les amener & une hauteur
d'utilisation plus confortable.
Le grand tiroir offre une capacit6
de rangement pratique.
Coloris assortis disponibles.
Personnalisez votre nouvelle laveuse et s6cheuse gr&ce
aux authentiques accessoires Whirlpool suivants. Pour
plus d'informations sur les options et sur les possibilit6s
de commande, contactez votre revendeur ou consultez :
www.maytag.ca.
Stack Kit
If space is at a premium,
the stack kit allows the dryer
to be installed on top of
the washer.
Ensemble de superposition
Si I'espace disponible est restreint,
I'ensemble de superposition
permet b,la s6cheuse d'6tre
install6e par dessus la laveuse.
Worksurface
The worksurface bridges the washer and
dryer, and provides a convenient working
and storage area.
Surface de travail
La surface de travail 6tablit la liaison entre
la laveuse et la s6cheuse et offre une zone
de travail et d'entreposage pratique.
CONTROL EL NND FEATURES
Not all features and cycles are available on all models.
Steam models
T heavy duty
whites
power
cancel load
rinse/droll
&spin
soak
fresh hold
clean
washer
w_thNr_
)edding
start
,@)
/ pause
detergent
B Liquid fabric softener
C Liquid Chlorine bleach
D Oxi Boost
press and hold
for 3 seconds
Non=Steam models
O
I
power
©
cancel
heavy duty
whites
load
rinse/drain
&spin
soak
clean
washer
with a_r_
control
_llergen
start
/ pause
/ ,&Iyo__&
/
@
_A HE detergent
B Liquid fabric softener
C Liquid chlorine bleach
4
-O
press and hold
for 3 seconds
I
O
O
O
0
POWER/CANCEL BUTTON
Press to turn the washer on and off.
Press to stop/cancel a cycle at any time.
WASH CYCLE KNOB
Turn the Wash Cycle Knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles
that best suit your load.
START/PAUSE BUTTON
Press and hold to start a cycle, or press once while a cycle
is in process to pause it.
DELAY START + and = BUTTONS
Use these buttons to delay the start of the wash cycle
by up to 10 hours on models with Steam, and 8 hours
on non-Steam models.
O
LED DISPLAY AND SETTINGS BUTTONS
When you select a cycle, its default settings will light up and
the Estimated Time Remaining will be displayed. Factors
such as load size, wash temperature, and water pressure
may affect the time shown in the display. Overloading,
unbalanced loads, or excessive suds may cause the washer
to adjust the cycle time, as well.
Use the buttons along the bottom of the display to adjust
settings. See "Cycle Guide" for available settings on each
cycle. Not all settings are available with all cycles.
Temp Level
The recommended wash temperature is preset for each
cycle. You may also select a wash temperature based
on the type of fabric and soils being washed. For best
results, use the warmest wash water safe for your
fabric, following the garment label instructions. All wash
temperatures feature a cold rinse, except Warm*, which
has a warm wash and a warm rinse.
@
O
Soil Level
Soil level (wash time) is preset for each wash cycle. As you
press the Soil Level button, the cycle time will increase or
decrease in the Estimated Time Remaining display. O
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press Soil Level to select more wash time. For
lightly soiled and delicate fabrics, press Soil Level to
select less wash time. Lower soil level settings will help
reduce tangling and wrinkling.
Spin Speed
This washer automatically selects the spin speed based
on the cycle selected. Preset speeds can be changed.
Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
Slower spin speeds reduce wrinkling, but will leave
your load more damp.
Cycle Status Lights
The indicator bar along the right side of the display will
let you know what stage of the wash cycle is in process,
as well as when the door is locked or if you can still add
an item. For more information on each stage, see "Cycle
Status Lights".
OPTION BUTTONS
Use these buttons to activate additional wash options
or additional features on the washer. Not all options are
available on all models or all cycles. See the "Cycle Guide"
for information on which cycles include which options.
Extra Rinse
Activate this option to add an extra rinse to most cycles.
NOTE: Some cycles include this feature as a default. See
"Cycle Guide" for details.
Oxi Boost (on some models}
Turn this option on when using Oxi boost products in the
dispenser to ensure they are dispensed at the optimal
time in the cycle.
Max Extract (on some models}
MaxExtract uses an extended high-speed spin to remove
additional water during the spin. This helps reduce drying
times.
Stain Clean (on some models}
The Stain Clean option adds additional soak and wash
time to many cycles to help remove tough stains.
An integrated heater helps to maintain optimal wash
temperatures.
Cycle Signal
Use this option to adjust volume of the signal that sounds
at end of cycle.
NOTE: You may also turn off the tones that sound when a
button is pressed. Press and hold the Cycle Signal button
for about one second to turn button sounds on or off.
Control Lock
Press and hold for 3 seconds to lock the controls to
avoid unwanted changes or operation. Press and
hold 3 seconds again to unlock. The indicator will light
to show when controls are locked. You may still press
START/PAUSE to pause the cycle, or press the POWER/
CANCEL button to turn the washer off.
DRUM LIGHT (Steam models only)
Steam models feature an LED drum light. Press and hold
Steam for Stains to turn the LED drum light on or off. The
light will also turn on when the door is open, and turn off
automatically after about 5 minutes.
STEAM FOR STAINS (Steam models only)
The Steam for Stains option adds additional soak and
wash time to many cycles to help remove tough stains.
An integrated heater helps to maintain optimal wash
temperatures. Steam for Stains includes a Steam boost for
added cleaning power. See the "Cycle Guide" for cycles that
allow the Steam for Stains option.
FRESH HOLD TM OPTION
With the washer on, press to activate the Fresh Hold 'M
option. This will periodically tumble the load after the end
of the cycle for up to 16 hours while the integrated fan
circulates air through the washer to reduce humidity. You
may also activate the Fresh Hold option without running a
cycle by pressing and holding for 3 seconds, then pressing
START/PAUSE.
NOTES:
The door will lock while the Fresh Hold option is active.
Press the POWER/CANCEL button to stop the cycle and
unlock the door.
Fresh Hold is not available if the spin speed is set to
No Spin.
DISPENSER DRAWER
The dispenser drawer gives you the convenience of
automatically adding HE detergent, liquid chlorine bleach,
and liquid fabric softener to the wash load at the proper
time. Steam models also feature an Oxi/color-safe bleach
compartment. See "Using the Dispenser" for information on
using the dispenser drawer.
@
Q
Q
High Efficiency "HE" detergent compartment
This compartment holds liquid or powdered HE
detergent for your main wash cycle.
For models without an Oxi dispenser compartment,
liquid or powdered color-safe bleach or Oxi
booster product may be added to the HE detergent
compartment along with the same type of detergent,
liquid or powdered.
Liquid fabric softener compartment
Automatically dilutes and dispenses liquid fabric
softener at the optimal time in the cycle.
NOTE: Use only liquid fabric softener in this dispenser.
Liquid chlorine bleach compartment
Automatically dilutes and dispenses liquid chlorine
bleach at the optimal time during the first rinse after the
wash cycle. This compartment cannot dilute powdered
bleach.
Q
Oxi Boost compartment (Steam models only}
This compartment holds measured liquid or powdered
Oxi booster product and dispenses it at the proper time
in the cycle. See the "Cycle Guide" for cycles that offer
the Oxi Boost option.
CYCLE GUIDE -- ST ND D CYCLES
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
flterns to wash J
usingdefault Cycle: =Wash
cycle settings= lemperature::
Normally soiled cottons Normal
linens, sheets, and
mixed garment loads
Sturdy colorfast
fabrics and heavily
soiled garments,
towels, and jeans
Heavily soiled white
fabrics and garments
Heavily soiled
durable fabrics,
overalls, coveralls,
sweatshirts, pants, and
outdoor garments
Lightly-soiled shirts,
blouses, trousers,
cants and dresses
sp n
Speed:
Heavy
Duty
Whites
Hot
Warm*
Warm
Cold
Sanitize t
Hot
Warm*
Warm
Cold
Sanitize t
Hot
Warm*
Warm
Cold
High
Medium
No Spin
H_gh
Medium
Low
No Spin
High
Medium
Low
No Spin
Power Wash
Wrinkle
Control
Sanitize t
Hot
Warm*
Warm
Cold
Hot
Warm
Cold
H_gh
Medium
Low
No Spin
Medium
Low
Extra Low
No Spin
so, Available cyde Detaus:
Level: Options: I
Extra Heavy Extra Rinse _ This cycle combines medium-speed
Heavy Stain Clean 1 _ tumbling and a high-speed spin.
Normal Max Extract This cycle is designed to provide
Light Oxi Boost the most energy efficiency.
Fresh Hold
Delay Start
Extra Heavy Extra Rinse _ High-speed tumbling and a
Heavy Stain Clean 1 _ high-speed final spin help
Normal Max Extract provide optimal cleaning and
Light Oxi Boost reduce drying times.
Fresh Hold
Delay Start
Extra Heavy Extra Rinse _ Hot wash temperatures ensure
Heavy Stain Clean _ _ liquid chlorine bleach action.
Normal Max Extract An Extra Rinse helps remove
Light Oxi Boost any bleach residue in clothes.
Fresh Hold
Delay Start
Extra Heavy Extra Rinse _ Features an extended wash time
Stain Clean _ _ to help remove tough stains.
Heavy
Normal
Light
Extra Heavy
Heavy
Normal
Light
Max Extract
Ox] Boost
Fresh Hold
Delay Start
Extra Rinse
Stain Clean _
Max Extract
Ox] Boost
Fresh Hold
Stain Clean/Steam for Stains
(depending on model)is
automatically added for extra
cleaning power.
This cycle combines low-speedtumbling and low-speed spin
for gentle fabric care and reduced
wrinkling
Delay Start
Blankets, comforters
Bedding
Sanitize t
Hot
Warm*
Warm
Cold
Sanitize t
Hot
Warm*
Warm
Cold
High
Medium
Low
Extra Low
No Spin
High
Medium
Extra Heavy
Heavy
Normal
Light
Extra Heavy
Heavy
Normal
Light
Sturdy garments and
household items
exposed to possible
allergens
Allergen tt
Delicate
Sheer fabrics,
lingerie, sweaters,
and silks
High
Medium
Low
Extra Low
No Spin
Normal
Light
Extra Rinse
Stain Clean _
Oxi Boost
Fresh Hold
Delay Start
Extra Rinse
Stain Clean 1
Max Extract
Oxi Boost
Fresh Hold
Delay Start
Extra Rinse
Fresh Hold
Delay Start
Uses an initial soak to completelysaturate the load, followed by
medium wash speeds and a
medium-speed spin to maintain
load balance.
Uses more water to flush out
allergens such as dust mites
and pet dander from
normally-soiled items.
This cycle combines low-speed
tumbling and low-speed spin
for gentle fabric care and reduced
wrinkling.
* All temperature selections feature a Cold rinse, except Warm/Warm, which features a warm wash and a warm rinse.
Stain Clean on non-Steam models. Steam for Stains on Steam models. See "Control Panel and Features" for additional information.
Models: MHW6000**, MHW7000**
Sanitize
Cycles certified by NSF International, an independent, third party testing and certification organization are those with the
sanitize temperature selection available. The certification verified that these cycles reduce 99.9% of bacteria typically
found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle is complete.
Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol
P172 for Sanitizing Effectiveness.
6
_ Allergen
Allergen cycle certified by NSF International, an independent, third party testing and certification organization.
The certification verified that this cycle reduced tested allergens by at least 95.0% and maintained the water
temperature necessary to kill dust mites. Only the allergen cycle has been designed to meet the requirements of
NSF Protocol P351 for Allergen Reduction Performance effectiveness.
CYCLE GUIDE- SPECIe°PURPOSE CYCLES
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
cc,o os.
using default Y p
cycle settings: I Temperature*: Speed:
Small loads of 3 - 4
lightly soiled garments
Swimwear, items
that need rinsing only
Wet load of clothes
Heavily soiled garments
No clothes in washer
Small Load
:1" e/Drain
& Spin
Soak
Clean Washer
with Affresh _)
Hot
Warm
Cold
Warm*
Warm
Cold
N/A
Warm*
Warm
Cold
High
Medium
Low
Extra Low
High
Medium
Low
Extra Low
No Spin
High
Medium
Low
Extra Low
No Spin
Soil Available Cycle Details:
Level: Options: I
Heavy Extra Rinse _ For small loads (3-4 items) needed
Normal Fresh Hold _ quickly. This cycle combines
Light Delay Start high-speed tumbling, a shortened
N/A
N/A
Extra Heavy
Heavy
Normal
Light
Extra Rinse
Max Extract
Fresh Hold
Delay Start
Max Extract
Fresh Hold
Delay Start
Fresh Hold
Delay Start
@
wash time, and a high-speed spin
for reduced drying times.
This cycle adds water, then uses
high-speed tumbling and an extra
high-speed spin. For some fabrics,
you may wish to set the spin speed
to a lower setting.
Use Drain & Spin to remove excess
water from the load by choosing
Rinse/Drain & Spin and turning off
Extra Rinse. Spin speed can be set
to a lower setting.
Provides an extended soak without
a final spin to help loosen tough
stains prior to a wash cycle.
Use monthly with Affresh _>to clean
the interior of the washer. Make
sure no clothes are in washer. The
Clean Washer light will flash every
30 loads to remind you to run the
Clean Washer cycle.
All temperature selections feature a Cold rinse, except Warm/Warm, which features a warm wash and a warm rinse.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Q Srnall load: Fill the washer drum with 3-4 items, not more than 1/4 full.
_ Mediurn load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
De not dry anything that has ever had any type of oil on
it (including cooking el(s).
Doing so can result in death, explosion, or fire.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efficiency." Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced
rinsing performance, it may also result in component failure and,
over time, build-up of mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Use only High Efficiency (HE)detergent.
First wash cycle without laundry
Before washing clothes for the first time, if not completed during
the final installation step, choose the QUICK WASH cycle and
run it without clothes. Use only HE detergent. Use 1/2 the
manufacturer's recommended amount for a medium-size load.
This initial cycle serves to ensure the interior is clean before
washing clothes.
1. Sort and prepare your laundry
Sort items by recommended cycle, water temperature, and
colorfastness. Separate heavily soiled items from lightly soiled.
Separate delicate items from sturdy fabrics. Treat stains
promptly and check for colorfastness by testing stain remover
products on an inside seam.
8
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
IMPORTANT:
[] Empty pockets. Loose change, buttons, or any small object
can plug pumps and may require a service call.
[] Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
[] Mend rips and tears to avoid further damage to items
during washing.
[] Turn knits inside out to prevent pilling. Separate lint-takers
from lint-givers. Synthetics, knits, and corduroy fabrics will
pick up lint from towels, rugs, and chenille fabrics.
[] Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
[] Always read and follow fabric care labels and laundry
product instructions. Improper usage may cause damage
to your garments.
2. Load laundry into washer
Open the washer door. Place a load of sorted clothes loosely in
the washer, items need to move freely for best cleaning and to
reduce wrinkling and tangling. Close the washer door by pushing
it firmly until the latch clicks.
[] Depending on load type and cycle, the washer can be fully
loaded, but not tightly packed. Washer door should close
easily. See "Cycle Guide" for loading suggestions.
[] Mix large and small items and avoid washing single items.
Load evenly.
[] Wash small items in mesh garment bags. For multiple items,
use more than one bag and fill bags equally.
Using the Dispenser
To use the dispenser drawer:
1. Open the dispenser drawer.
2. Add laundry products as described in steps 3-6.
3. Slowly close the dispenser drawer. Make sure it is
completely closed.
NOTE: A small amount of water may remain in the dispensers
from the previous wash cycle. This is normal.
Add HE detergent to dispenser
Models with a 4-compartment dispenser
gent
Pour a measured amount of HE
detergent into detergent compartment.
For powdered detergent, slide the
selector to the left. For liquid detergent,
slide the selector to the right.
Do not overfill; adding too much
Use only High Efficiency
detergent may cause detergent to be
dispensed into the washer too early.
Powdered detergent:
Slide the selector to the left. Slidethe selector to the right.
Liquid detergent:
(HE)detergent.
IMPORTANT: Use powdered detergent when using the
Delay Wash option. Liquid detergent may seep out before
the wash begins.
Models with a 3-compartment dispenser
detergent
Pour a measured amount of HE
detergent into detergent compartment.
For powdered detergent, slide the
selector to the left. For liquid detergent,
slide the selector to the right.
Do not overfill; adding too much
detergent may cause detergent to be
dispensed into the washer too early.
Powdered detergent:
Slide the selector to the left.
Use only High Efficiency
(HE)detergent.
Liquiddetergent:
Slide the selector to the right,
If you would like to use powdered or liquid oxi-type
boosters or color-safe bleach, follow the manufacturer's
recommendations for placement. If no recommendation
is available, you may add powdered or liquid oxi-type
boosters or color-safe bleach to the detergent
compartment with the same type of detergent,
powdered or liquid.
IMPORTANT: Use powdered detergent when using
the Delay Wash option. Liquid detergent may seep out
before the wash begins.
4, Add fabric softener to dispenser
(if desired)
Four compartment dispenser shown
Liquid fabric
softener
compartment
_6. Add Oxi or color safe bleach
I (on some models)
Pour a measured amount of liquid fabric softener into liquid
fabric softener compartment. Always follow manufacturer's
directions for correct amount of fabric softener based on your
load size.
Fabric softener is always dispensed in the last rinse, even if
Extra Rinse is selected.
IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup
(60 mL) of fabric softener. Do not fill past the MAX line.
Overfilling dispenser will cause fabric softener to immediately
dispense into washer.
[] Do not spill or drip any fabric softener onto the clothes.
[] Do not use liquid fabric softener dispenser balls in this
washer. They will not dispense correctly.
On models with a 4-compartment dispenser,
add Oxi booster or color safe bleach to the
Oxi compartment. Be sure to select the
Oxi Boost option.
[] Always follow the manufacturer's recommendations.
For models without an O×i compartment:
Ifyou would like to use powdered or liquid oxi-type boosters or
color-safe bleach, follow the manufacturer's recommendations
for placement. If no recommendation is available, you may add
powdered or liquid oxi-type boosters or color-safe bleach to
the detergent compartment with the same type of detergent,
powdered or liquid.
Add liquid chlorine bleach
to dispenser (if desired}
7, Press POWER/CANCEL to turn
on washer
power
Q
cancel
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then press and hold POWER/CANCEL to turn
on the washer.
Add a measured amount of liquid chlorine bleach to the bleach
compartment. Do not overfill, dilute, or use more than 2/3 cup
(165 mL). Use a measuring cup with a pour spout; do not guess.
[] Do not fill beyond the "MAX" level. Overfilling will cause bleach
to dispense too soon and may cause garment damage.
[] Do not add color-safe bleach or oxi-product to this dispenser.
10
8. Select CYCLE
heav
whites
/
rinse/drai
& spin
Steam model shown
soak
clean
washer
with
wrinkle control
aedding
allergen
Jelicate
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features. Not all options and settings are
available on all cycles.
9. Adjust settings, if desired
Steam model shown
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temp Level, Soil Level, and Spin Speed. Adjusting
the Soil Level will change the Estimated Time Remaining.
Overloading, unbalanced loads, or excessive suds may also
cause the washer to increase the cycle time.
NOTE: Not all settings are available on all cycles. See "Cycle
Guide" for available settings.
1 0. Select any additional options
Steam model shown
1 "1. Setting a delayed start
If you do not want to begin a cycle immediately, you may
choose the DELAY START option. This will delay the start
of the wash cycle by up to 10 hours on models with Steam,
and 8 hours on non-Steam models.
To set a delayed Start:
1. Press DELAY START A and V buttons to set the desired
delay time.
2. Press START/PAUSE to set the delay. The delay countdown
has started when the START/PAUSE light stops blinking.
1 2. Press and hold START/PAUSE
to begin wash cycle
start
Q
pause
press and
hold to start
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER/CANCEL button.
Once you press and hold START/PAUSE, you will hear the
door lock, unlock, and lock again. The washer door will remain
locked during the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while the "Add a Garment" light is lit.
Press START/PAUSE once; the door will unlock
once the washer movement has stopped, start
This may take several minutes. Then close (_;
door and press START/PAUSE again to restart
pause
the cycle. ._,_,,
To add additional options to the cycle, such as Extra Rinse,
Fresh Hold, Stain Clean/Steam for Stains (on some models), or
Max Extract (on some models), press the button for the desired
options to add them to the selected cycle.
NOTE: Not all options are available with all cycles. See "Cycle
Guide" for available options.
11
Cycle Status Lights
Steam model shown
The Cycle Status Lights show the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that are
different from traditional washers.
Door Locked
Door Locked will light to indicate that the door is locked and
cannot be opened without first pausing or canceling the cycle.
Sensing
When the START/PAUSE button is pressed, the washer will
first perform a self-test on the door lock mechanism. You will
hear a click, the drum will make a partial turn, and the door
will unlock briefly before locking again.
Once the door has locked the second time, the washer will
begin tumbling and adding water. This sensing process will
continue until the correct amount of water has been added
for the load. You may also hear water flowing through the
dispenser, adding detergent to the load.
The displayed time may change as the washer goes through
the sensing process. This is normal.
Add a Garment
When Add a Garment is lit, you may pause the washer, open
the door, and add items.
Sanitized
Sanitized will light on cycles with a Sanitize setting once the
load has been washed at the proper temperature for the
necessary time to meet NSF Sanitization requirements.
Delay
The Delay indicator will light if a Delay Start has been set.
Once the programmed delay has ended, the indicator will
turn off and the cycle will begin.
Wash
This is the main portion of the wash cycle. You will see the
washer tumble the load. The motor sounds may change at
different stages in the cycle. The wash time is determined by
the selected cycle and soil level along with your load size.
Rinse
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. If used, liquid chlorine
bleach is added in the first rinse. Fabric Softener is added
in the last rinse.
Spin
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
Steam (on some models}
This will light to show that the cycle is using a Steam boost
for added cleaning power.
Done
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
Fresh Hold TM
The Fresh Hold 'Mindicator will light when the Fresh
Hold '_ option is active. During this time, the washer
will occasionally tumble the load while a fan circulates
fresh air through the washer.
12
13, Remove garments promptly
after cycle is finished
for small items between the tub and the basket.
If you will be unable to remove the load
promptly, use the Fresh Hold TM option. If the
Fresh Hold TM option is selected, the washer will
automatically activate the fan and tumble
the load periodically for up to 16 hours.
NOTE:
[] After any wash cycle is completed,
the door must be opened and then
closed before a new cycle can begin.
[] A small amount of water may remain in the dispensers after
the wash cycle is complete. This is normal.
[] This washer has a tight seal to avoid water leaks. To avoid
odors, leave the door open to allow the washer to dry
between uses.
WASHERI INTE CE
CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes.
To keep washer interior odor-free, follow this recommended
cleaning procedure at least once a month:
1. Make sure laundry drum is empty.
2. Using recommended AFFRESH ®washer cleaner, add
one tablet to washer basket.
OR
If using liquid chlorine bleach, add 1 cup (250 mL) to
liquid chlorine bleach dispenser.
IMPORTANT: Do not add detergent to Clean Washer
with Affresh ®cycle. Do not use more than recommended
amount of bleach to avoid damaging product over time.
3. Close washer door.
4. Press POWER/CANCEL
5. Select Clean Washer with Affresh TM cycle.
6. Press and hold START/PAUSE.
NOTE: The basket will rotate, then the door will unlock,
lock again, and then the cycle will continue. The washer
will add some water, and the basket will rotate while
the washer runs a short sensing cycle. This will take
approximately 3 minutes.
7. The cycle will determine whether clothing or other items
are in the washer. If no items are detected in the washer,
it will proceed to Step 8.
If any items are detected in the washer, "rL" will be
displayed, and the WASH and CONTROL LOCK
indicators will light. The door will unlock. Open and
remove any garments in the wash drum. Press POWER/
CANCEL to cancel the error message. Then repeat
steps 3-6 to start the cycle again.
8. Once the cycle has started, allow it to finish. If you must
cancel the cycle before it has finished, press POWER/
CANCEL. "lnt" (Interrupted) will appear in the display.
It may take up to 10 minutes for the door to unlock.
9. After the cycle has ended, leave the door open slightly,
to allow for better ventilation and drying of washer
interior.
To clean exterior:
1. Use a soft, damp cloth or sponge to wipe up any spills.
2. Use mild soap and water if needed.
IMPORTANT: To avoid damaging washer finish, do not use
abrasive products.
13
WASHERI INTE CE
CLEANING THE DISPENSER
You may find laundry product residue leftover in your
dispenser compartments. To remove residue, follow this
recommended cleaning procedure:
1. Pull dispenser drawer out until it stops.
2. Press down on the release tab and pull straight out to
remove the dispenser.
\
3. Lift off cover panel by
pulling straight up.
4. Wash dispenser and
cover panel in warm,
soapy water, using a mild
detergent.
5. Rinse with warm water.
6. Air dry or wipe with a
clean towel, slide cover
panel back onto posts on
dispenser.
7. Align edges of dispenser
with guides in washer,
then slide dispenser
back into slot.
IMPORTANT: Dispenser is
not dishwasher safe.
f CLEANING THE DOOR SEAL
1. Open the washer door and remove any clothing or items
from the washer.
2. Inspect the gray colored seal between the door opening
and the basket for stained areas. Pull back the seal to
inspect all areas under the seal and to check for foreign
objects.
3. If stained areas are found, wipe down these areas of the
seal, using the procedure that follows.
a) Mix a dilute solution, using 3/4 cup (177 mL) of liquid
chlorine bleach, and 1 gal. (3.8 L) of warm tap water.
b) Wipe the seal area with the dilute solution, using
a damp cloth.
c} Let stand 5 minutes.
d) Wipe down area thoroughly with a dry cloth and let the
washer interior air dry with door open.
iMPORTANT: Wear rubber gloves when cleaning for
prolonged periods. Refer to the bleach manufacturer's
instructions for proper use.
14
NON=USE AND VACATION CARE
Operate your washer only when you are home. If moving,
or not using your washer for a period of time, follow these
steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer to avoid flooding due
to water pressure surges.
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run
washer on RINSE AND SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
iMPORTANT: To reduce risk of hose failure, replace inlet
hoses every five years and periodically inspect for kinks,
cuts, wear or water leaks.
HELPFUL TiP: When replacing your inlet hoses, mark
replacement date on label with a permanent marker.
r
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain hose from drain system and from back
of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Bundle power cord with a rubber band or cable tie to
keep it from hanging onto the ground.
iMPORTANT: Call for service to install new transport bolts.
Do not reuse transport bolts. Washer must be transported
in the upright position. To avoid structural damage to your
washer, it must be properly set up for relocation
by a certified technician.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
r
RE! NSTALLING/USI NG WASHER AGAI N
To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through POWER WASH cycle to clean
washer and remove antifreeze, if used. Use only HE
detergent. Use half the manufacturer's recommended
amount for a medium-size load.
15
TROUBLESHOOTING
if you experience
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Possible Causes | Solution
1
Once any possible issues are corrected, press POWER/CANCEL once to clear the code. Reselect and restart the cycle.
Sud (Excess suds)
appears in display
F8E1 (water supply
error) appears in display
Excessive suds in washer. Washer is
running a suds reduction routine.
Check for proper water supply.
Allow the machine to continue. Use only HE detergent.
Always measure detergent, and base detergent quantity on
load size. Follow detergent manufacturer's instructions.
Both hoses must be attached and have water flowing to the
inlet valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Press POWER/CANCEL once to clear the code. Then press
POWER/CANCEL again to restart washer. If code appears
again, call for service.
F9E1 (drain pump Check plumbing for correct drain Check drain hose for proper installation.
system error) appears
in display
hose installation. Drain hose extends
intostandpipe farther than 41/2''
(114 mm).
Make sure the drain hose is not kinked, pinched, or blocked.
Remove any clogs from drain hose.
Use drain hose form and securely attach to drainpipe or tub.
Lower drain hose if the end is higher than 96" (2.4 m) above
the floor.
Use only HE detergent. Always measure detergent and follow
manufacture's directions based on load size and soil level.
Not using HE detergent or using too
much HE detergent.
F5E2 (door will not lock) Washer door not locking. Press POWER/CANCEL to cancel the cycle. Make sure the
appears in display door is closed completely and latching. Check for items in
the washer drum that may be keeping the door from closing
completely.
F7E1 (motor drive error) Motor is having difficulty turning Washer is overloaded. Remove some items. See "Cycle Guide"
appears in display the drum. for load size recommendations.
Make sure that all shipping materials have been removed. See
the Installation Instructions.
"rL" (remove load) Load detected in drum during Clean Remove items from drum and restart Clean Washer
appears in display Washer with AFFRESH TM cycle, with AFFRESW Mcycle.
Washer making error Door has not been opened and closed This code may appear when the washer is first turned on.
beeps, for at least 3 cycles. Open and close the door to clear the display.
Washer beeps when Door not closed. Close the door completely.
START/PAUSE is
pressed.
F#E# code other than System error code. Press POWER/CANCEL once to clear the code. Then press
as described above POWER/CANCEL again to restart washer. If code appears
appears in display again, call for service.
16
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
If you experience
Vibration, rocking, or
"walking"
Feet may not be in contact with the Front and rear feet must be in firm contact with floor, and washer
floor and locked, must be level to operate properly. Jam nuts must be tight
against the bottom of the cabinet.
Washer may not be level. Check floor for flexing or sagging. If flooring is uneven, a 3/4"
(19 mm) piece of plywood under your washer will reduce sound.
Load could be unbalanced
or too large.
The shipping bolts are still in the
back of the washer.
See "Level the Washer" in Installation Instructions.
Avoid tightly packing the load. Avoid washing single items.
Balance a single item such as a rug or jeans jacket with a
few extra items.
Use Bedding cycle for oversized, non-absorbent items
such as comforters or poly-filled jackets. Other items are
not appropriate for Bedding cycle. See "Cycle Guide".
Item or load not suitable for selected cycle. See "Cycle Guide"
and "Using Your Washer" in this Use and Care Guide.
See "Remove transport bolts from washer" in the
Installation Instructions.
Clicking or metallic
noises
Gurgling or humming
Door locking or unlocking.
Objects caught in washer
drain system.
Washer may be
draining water.
The door will lock unlock and lock again. You will hear three
clicks after pushing start. This is normal.
Empty pockets before washing. Loose items such as coins
could fall between basket and tub or may block pump.
It may be necessary to call for service to remove items.
It is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel basket.
It is normal to hear the pump making a humming sound with
periodic gurgling or surging as final amounts of water are removed
during the spin/drain cycles.
Check the following for Fill hoses not attached tightly. Tighten fill-hose connection.
proper installation:
Fill hose washers. Are all four fill hose flat washers properly seated?
-Drain hose connection. Check that the drain hose is properly secured to drainpipe or
laundry tub.
Check household plumbing for leaks Water can backup out of a clogged sink or drainpipe. Check
or clogged sink or drain, all household plumbing for leaks (laundry tubs, drain pipe,
water pipes, and faucets.)
Water or suds leaking Not using HE detergent or using too Only use HE detergent. Suds from regular detergents can
from door or rear of much HE detergent, cause leaking from the door or rear of cabinet. Always measure
cabinet detergent and follow manufacturer's directions based on your
load requirements.
Periodically clean the the underside of the glass window to
avoid potential leaks.
Load not completely
covered in water.
Residue on door glass.
Door opened during "Add A
Garment."
Water level not visible on door or
does not cover clothes.
Water can drip off the inside of the door when the door is
opened after the start of a cycle.
This is normal for an HE front load washer. The washer senses load
sizes and adds the correct amount of water for optimal cleaning.
J
17
TROUBLESHOOTING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
I If you experience
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Washer won't run or fill,
washer stops working
Possible Causes Solution
Check for proper water supply.
Check proper electrical supply.
Both hoses must be attached and have water flowing to
inlet valve.
Both Hot and Cold water faucets must be turned on.
Check that inlet valve screens have not become clogged.
Check for any kinks in inlet hoses, which can restrict water flow.
Plug power cord into a grounded 3 prong outlet.
Do not use an extension cord.
Ensure there is power to outlet.
Check electrical source or call an electrician to check if voltage
is low.
Reset a tripped circuit breaker. Replace any blown fuses.
_ NOTE: If problems continue, contact an electrician.
Normal washer operation. Door must be completely closed and latched for washer to run.
The washer door is not firmly shut.
Washer not loaded as recommended.
Not using HE detergent or using too
much HE detergent.
Door not opened between cycles.
18
Washer will pause during certain phases of cycle.
Do not interrupt cycle.
The washer pauses for about 2 minutes during certain cycles.
Allow the cycle to continue. Some cycles feature periods of
tumbling and soak.
Washer may be stopped to reduce suds.
The door must be closed during operation.
Remove several items, rearrange load evenly in drum.
Close door and press START/PAUSE.
Do not add more than 1 or 2 additional items after cycle has
started to avoid overloading or unbalancing.
Do not add more water to the washer.
Only use HE detergent. Suds from regular deiergents can slow
or stop the washer. Always measure detergent and following
manufacturers directions based on your load requirements.
To remove suds, cancel cycle. Select RINSE/DRAIN & SPIN.
Press START/PAUSE. Do not add more detergent.
After any wash cycle is completed, the door must be opened
and then closed before a new cycle can begin.
r
First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Washer not draining/
spinning, loads are
still wet
Door locked at end of
wash cycle.
Door will not unlock
hcorrect or wrong
wash or rinse
temperatures
Warm* selection not
available
FanFresh Moption not
selectable
Desired setting or
option does not light
Empty pockets and use garment bags
for small items.
Drain hose extends into standpipe
farther than 4.5" (114 mm).
The drain hose is clogged, or the
end of the drain hose more than
96" (2.4 m) above the floor.
The drain hose fits too tightly
in the standpipe, or is it taped
to the standpipe.
Using cycles with a lower spin speed.
Washer not loaded as recommended.
The load may be out of balance.
Not using HE detergent or using too
much HE detergent.
The drum has clothing stuck between
spin basket and outer tub.
Water remaining in washer after cycle.
Door locks when cycle has started.
Check for proper water supply.
Washing many loads.
Not all settings and options are
available for all cycles.
Spin speed set to No Spin.
For best performance, not all
settings are available with each cycle,
and some options cannot be used
together.
Small items may have been caught in pump.
Check drain hose for proper installation. Use drain hose form
and securely attach to drainpipe or tub. Do not tape over drain
opening.
Lower drain hose if the end ishigher than 96" (2.4 m) above the
floor. Remove any clogs from drain hose. See "hstallation
Requirements."
The drain hose should be loose yet fit securely. Do not seal the
drain hose with tape. The hose needs an air gap. See Secure the
Drain Hose."
Cycles with lower spin speeds remove less water than cycles
with high spin speeds. Use the recommended cycle/speed spin
for your garment.
A tightly packed or unbalanced load may not allow the washer
to spin correctly, leaving the load wetter than normal. See "Cycle
Guide" for load size recommendation for each cycle.
Avoid washing single items. Balance a single item such as a rug
or jeans jacket with afew extra items.
Use only HE detergent. Suds from regular detergent or using too
much detergent can slow or stop draining or spinning. Always
measure and follow manufacturer's directions for your load.
To remove extra suds, Select RINSEiDR/_ N & SPIN. Do not add
detergent.
Rotate drum by hand to check for any binding of the spin
basket and outer tub. Move open end drum up and down while
holding outer tub steady and check for looseness (more than
1/4" (6.35 mm) of movement).
Select R NS_iiiDRAIN & SPIN to remove any water remaining in
the washer. The washer door will unlock at the end of the drain.
If the "Add A Garment" light is lit, press START/PAUSE once.
The door will unlock.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached to both washer and faucet, and
have both hot and cold water flowing to inlet valve.
Check that inlet valve screens are not clogged.
Remove any kinks in hoses.
Your hot water tank may not have enough hot water to keep up
with the number of hot or warm washes. This is normal.
See the "Cycle Guide" for the available settings and options for
each cycle.
Fresh Hold _'_option is not available if No Spin is selected.
See the "Cycle Guide" for the available settings and options for
each cycle.
J
19
TROUBLESHOOTING
f First try the solutions suggested here or visit our website at www.maytag.com/help
for assistance and to possibly avoid a service call.
Load not rinsed
Load is wrinkled,
twisted, or tangled
Not cleaning or
removing stains
Check for proper water supply.
Not using HE detergent or using too
much HE detergent.
Washer not loaded as recommended.
Washer not loaded as recommended.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to the
inlet valve.
Both hot and cold water faucets must be on.
hlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
The suds from regular detergent can cause the washer
to operate incorrectly.
Use only HE detergent. Always measure detergent and follow
manufacturer's directions based on load size and soil level.
Avoid tightly packing the washer. The washer will not rinse well
if tightly packed. Load with dry items only. See the "Cycle
Guide" for load size recommendations for each cycle.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer has started.
Add load loosely. Htemsneed to move freely reduce
wrinkling and tangling. See the "Cycle Guide" for load
size recommendations for each cycle.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Wash action and/or spin speed too Select a slower spin speed. Note that items will be wetter
fast for load. than when using a higher speed spin.
The washer is not unloaded promptly. Unload the washer as soon as it stops or use TumbleFresh TM
if you will not be able to unload the washer at the end of the
cycle.
Not choosing the right cycle for the Use the Delicate cycle or another cycle with a low spin speed
load being washed, to reduce wrinkling.
The wash water was not warm Hfsafe for load, use warm or hot wash water.
enough to relax wrinkles.
Washer not loaded as recommended.
Add load loosely. Htemsneed to move freely for best cleaning.
See the "Cycle Guide" for load size recommendations for each
cycle.
Add only 1 or 2 garments after washer has started.
Not using HE detergent or using too Use only HE detergent. Always measure detergent and follow
much HE detergent, manufacture's directions based on load size and soil level.
Hard water or high level of iron (rust) You may need to install a water softener and/or iron filter.
in water.
Fabric softener dispensing ball used. Dispensing balls will not operate correctly with this washer.
Add liquid fabric softener to the fabric softener compartment.
Powdered detergent used for Consider using liquid detergent.
low-speed cycle.
Not using correct cycle for fabric type.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
If using Small Load cycle, wash only a few items.
Use Whites and Heavy Duty cycle for tough cleaning.
Add an extra rinse for heavily soiled loads.
J
2O
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Maytag MHW6000XW2 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues