Gardner Bender GBT-2502 Manuel utilisateur
- Taper
- Manuel utilisateur
U|xaDCAHGy94733kzU
Milwaukee, WI
Gardnerbender.com
ZK1393 0321 Rev. 1
Made in China/
Hecho en China/
Fabriqué en Chine
WARNING: Cancer and Reproductive Harm
-www.P65Warnings.ca.gov.
ADVERTENCIA: Cáncer y Daño Reproductivo
-www.P65Warnings.ca.gov.
AVERTISSEMENT: Cancer et Troubles de l’appareil reproducteur
-www.P65Warnings.ca.gov.
Full instructions can be downloaded from: www.gardnerbender.com/en/resources
Se pueden descargar las instrucciones completas desde:
http://www.gardnerbender.com/es-es/resources
Les instructions complètes pour cet outil peuvent être téléchargées à
http://www.gardnerbender.com/fr-fr/resources
WARNING: READ OPERATING INSTRUCTIONS BEFORE USING.
ADVERTENCIA: LEA TODAS LAS INSTRUCCIONES DE OPERACIÓN ANTES DE USAR.
AVERTISSEMENT: LIRE LES INSTRUCTIONS AVANT L’UTILISATION.
Digital Battery Tester
AA, AAA, C, D, N, 9V, 1.5V
BAG DIMENSIONS: 70mm x 130mm
PRINT AREA: 60mm x 97mm
Requires one (1) 1.5V button cell battery
(not included)
OPERATING INSTRUCTIONS:
1.5V BATTERIES
OPERATING INSTRUCTIONS:
9V BATTERIES
Pull the test arm up.
Position the battery into the test arm
(the battery’s + terminal faces up).
Gently press down the test arm until
good contact is made between the
battery and the tester.
Touch the battery to the 9V test
terminals at the bottom of the tester
(+ to +, and - to the - terminal)
Read the value on the left scale. The
charge indicator displays the battery
charge measured. Green: full, Yellow:
moderate, Orange: low, Red: flat
Read the value on the right scale.
The charge indicator displays the
battery charge measured. Green: full,
Yellow: moderate, Orange: low, Red: flat
When testing is complete, remove
the battery from the test arm
When testing is complete, remove
the battery from the test arm
GBT-2502
-
1
Gardner Bender GBT-2502 Manuel utilisateur
- Taper
- Manuel utilisateur
dans d''autres langues
- English: Gardner Bender GBT-2502 User manual