Modern Forms FR-D2102 Ultra Mode d'emploi

Marque: Modern Forms

Modèle: FR-D2102 Ultra

Catégorie: Ventilateurs ménagers

Taper: Mode d'emploi

Ce manuel convient également à

Ultra UV-C Replacement Module

Ultra

Smart Fan

Installation Instructions

works with the

Google Assistant

FR-D2102

Ultra Smart Fan Instructions2

Please read and

save these instructions

before installation

DO NOT RETURN TO STORE

FR-D2102 Ultra Smart Fan Instructions 3

For all questions about your ceiling fan please read all included

instructions, installation procedures, troubleshooting guidelines

and warranty information before starting installation.

For missing parts or general inquiries call our trained technical staﬀ at:

1-866-810-6615 option 1

MON-FRI 8AM-8PM EST

Email: customerservice@modernforms.com

Or live chat at modernforms.com

For fast service have the following information below when you call:

1. Model Name and Number

2. Part Number and Part Description

3. Date Of Purchase and Purchase Location

1-866-810-6615 option 2

MON-FRI 8AM-8PM EST

Email: fansupport@modernforms.com

General Inquiries

Fan Support

FR-D2102

Ultra Smart Fan Instructions4

For operation, maintenance, and troubleshooting information,

visit http://modernforms.com/fan-support/

To reduce the risk of electric shock, ensure electricity has been turned oﬀ at the circuit breaker

before beginning. All wiring must be in accordance with the National Electrical Code “ANSI/NFPA

70” and local electrical codes. Electrical installation should be performed by a licensed electrician.

The fan must be mounted with a minimum of 7 ft. (2.1m) clearance from the trailing edge of

the fan blades to the floor and a minimum of 1.5 ft (0.5m) from the edge of the fan blades to the

surrounding walls. Never place objects in the path of the fan blades. To avoid personal injury or

damage to the fan and other items, please be cautious when working around or cleaning the fan.

To avoid electrical shock or damage to the motor or ﬁnish, do not use water or chemicals

when cleaning the fan or fan blades. A dry cloth or lightly dampened cloth will be suitable

for most cleaning.

After making electrical connections, spliced conductors should be turned upward and pushed

carefully up into the outlet box. The wires should be spread apart with the grounded conductor and

the equipment-grounding conductor on one side of the outlet box, and the ungrounded conductor

on the other side of the outlet box.

WARNING: This product should be installed by a licensed electrician. This product should be

mounted to an outlet box UL-listed marked “Acceptable for fan support” of 15.9 kg (35 lbs) or

less and should use mounting screws provided with the outlet box and/or support directly from

building structure. Most outlet boxes commonly used for the support of luminaires are not

acceptable for fan support. Consult a licensed electrician.

All set screws must be checked and re-tightened

where necessary before installation.

WARNING: Do not install or use your fan if any part(s) is/are damaged or missing. This product

is designed for use only with the supplied parts and/or accessories designated for use with this

product by Modern Forms. Substitution of parts or accessories not designated for use with this

product by Modern Forms could result in personal injury or property damage and will void the

warranty. Contact an authorized dealer or the manufacturer if any parts are damaged or missing.

WARNING: Do not install this product in a location or manner that is not speciﬁcally designed

to accomodate the product as set forth in the instructin manual. Failure to use the product as

instructed may cause serious injury or damage.

WARNING: To reduce the risk of electric shock, this fan must be installed and operated with the

supplied remote control, or controlled from the Modern Forms app.

WARNING: Do not use power tools to assemble or install your fan. Using power tools can result in

improper assembly which can lead to noise or fan damage, personal injury or property damage.

WARNING: To reduce the risk of personal injury, do not bend the blade arms when installing the

brackets, balancing the blades or cleaning the fan.

WARNING: Do not insert foreign objects between rotating fan blades.

WARNING: Do not operate fan unless fan blades are in place. Noise and fan damage can occur

WARNING: This appliance is not intended for use by young children without supervision.

WARNING: To reduce the risk of ﬁre, electric shock, personal injury or damage to the fan or other

items, the outlet box and support structure must be securely mounted and capable of reliably

supporting a minimum of 35 Ibs (15.9 kg). Use only UL/cUL listed outlet boxes marked “FOR FAN

SUPPORT.” Use only the screws and washers provided with the outlet box.

CAUTION: Before assembling your fan, refer to the “Making the Electrical Connections“

section. If you feel you do not have enough wiring knowledge or experience, have your fan

installed by a licensed electrician.

NOTE: Before servicing or cleaning the fan, switch power oﬀ at the circuit breaker.

Safety Rules

FR-D2102 Ultra Smart Fan Instructions 5

When using electrical equipment, basic safety precautions should always be

followed including the following:

WARNING: Ultraviolet (UV) Radiation Hazard. The lamp in this unit produces UVC radiation. Direct

exposure of skin and eyes to UVC radiation may cause damage similar to sunburn reaction to the

skin and injury to the eyes. Never look directly, even briefly, at the light source of a UVC lamp. Skin

burns and eye injuries from UVC exposure usually resolve within a week with no known long-term

damage. Since the penetration depth of UVC radiation is very low, the risk of skin cancer, cataracts

or permanent vision loss is also thought to be very low. The type of eye injury associated with

exposure to UVC causes severe pain and a feeling of having sand in the eyes. Sometimes people

are unable to use their eyes for one to two days. It can occur after a very short exposure (seconds

to minutes) to UVC radiation. This product, including the UVC lamp and all of the product’s

components, should be used as instructed in this manual and the directions for use and operations,

including, including complying with all adequate safety safeguards, including but not limited to,

those indicated in the mounting instructions. This product must be mounted and installed as

instructed to ensure that the UV-C lamp can be operated in a safe way.

WARNING: This equipment is designed for use with UV radiation sources and must be installed in

compliance with technical directions to prevent risk of personal injury from UV radiation.

WARNING: UV radiation can pose a risk of personal injuries. Direct exposure can result in damage

to eyes and skin. To reduce risk of exposure this equipment must be installed in accordance with

the manufacturer’s installation instructions.

WARNING: UV and optical radiation can be reflected by surrounding surfaces such as ceilings and

walls. Since the reflective properties of surfaces can vary widely, they should be considered as

part of site planning. For example, UV light may lead to a change in the color of paint that has not

been UV stabilized. Fading or discoloration of materials directly exposed to UV radiation should be

considered normal wear. Use normal paints for the surface (e.g., the ceiling) above the fan as they

substantially absorb UV light. Do not paint the surface (e.g., the ceiling) with paint designed to

reflect UV light.

WARNING: It is the responsibility of the installer to ensure that persons will not be directly exposed

to UV or optical radiation during equipment operation. This will require the installer to conduct

an assessment of irradiance or illuminance levels in the surrounding occupied spaces prior to

occupancy.

WARNING: Equipment must be mounted in locations and heights where it will not be readily

subjected to tampering by unauthorized personnel.

WARNING: Maintenance and servicing of this UV product must be performed by authorized

personnel. Service personnel must wear appropriate Personal Protective Equipment (PPE) if the

equipment will be in operation during the maintenance or servicing work. Contact the equipment

manufacturer for PPE recommendations and guidance.

WARNING: The use of accessory equipment not recommended by the manufacturer may cause an

unsafe condition.

WARNING: Do not use this equipment for any purpose other than intended use.

WARNING: Do not install the fan where the top of the UV module can be visible, for example,

beneath a catwalk or breezeway that will permit direct exposure to UV radiation.

UV Safety Rules

Disclaimer: Failure to use the product as instructed may also negatively impact the product’s eﬀectiveness.

Manufacturer and its aﬃliates do not promise or warrant that the use of this product will protect or prevent any user

from infection and/or contamination. This product is not approved nor intended to be used to disinfect any device,

including medical devices. In addition to and without limitation of any exclusions or limitations of liability of the

manufacturer and its aﬃliates as set forth in the user manual or any agreement for sale, distribution or otherwise making

available of this product, the manufacturer and its aﬃliates shall have no responsibility or liability whatsoever for any

claim or damage that may arise from or relate to any use of this product outside of its intended use or contrary to the

installation and operation instructions, as described in the user manual and any other documentation provider to the

user, including mounting instruction.

Disclaimer: While there may be information here or on our website relating to the eﬀectiveness of the UV-C technology

incorporated in the ULTRA in reducing SARS-CoV-2 in the breathable air, Modern Forms makes no claims that its

products can cure, treat or prevent any conditions, including COVID-19. Always consult your healthcare provider with any

health-related questions. The ULTRA is not a substitute for good building air exchange practices or manual cleaning and

disinfection practices.

FR-D2102

Ultra Smart Fan Instructions6

Get Smart...

Integrates

seamlessly with:

devices you already own

works with the

Google Assistant

Premium smart

features:

Accessories:

MOTOR

complement high quality materials

personalize your experience

Quiet, reliable, and up to 70%

more ecient than AC fans

Wi-Fi and Bluetooth enabled

for exible control

Bluetooth Remote Control

ON/OFF

6 fan speeds

F-RCUV-WT White

Wet Location-listed to the strictest

UL/cUL safety regulations. Finished

and rated for interior and exterior use

ULTRA

VIOLET

FR-D2102 Ultra Smart Fan Instructions 7

Contents

Tools Required

1. Mounting Options 10

2. Installing the Mounting Bracket 12

3. Hanging the Fan 12

3. Hanging the Fan cont. 14

4. Attaching the Fan Blade 14

5. Making the Electrical Connections 16

6. Finishing the Installation 18

7. Controlling the Fan 20-21

8. Reset 22

9. Breeze Mode 22

10. Application 22

11. Accessories 24

12. Troubleshooting 24

13. Troubleshooting cont. 25-28

FR-D2102

Ultra Smart Fan Instructions8

Package Contents

5. Motor Assembly

6. Aluminum Tray

RPL-F-UV7INTRAY-**

(UV Module not included)

UV Module

UVF7IN-120V-R1-MOD

7. Control Receiver

w/Hardware

F-R3-2102-054

8. Remote w/Wall Cradle

F-RCUV-WT

1. Blade Set of 3

RPL-F2102-54-BD-**

2. Hanger Assembly -

Mounting Bracket

Downrod Assembly

RPL-HGR-ASM-10-**

(optional 6” rod included for closer to ceiling

mount applications)

3. Canopy & Canopy

Screw Ring

RPL-CAN-CYL-**

4. Coupling Cover

RPL-COU-CVR-**

** Denotes ﬁnish code of fan

Before discarding packaging materials be certain all parts have been removed.

Place the parts from the hardware bag into a small container to keep them from being lost.

• Part A

• Part B

• Part C

• Part D

Hardware Bag

RPL-F2102-PARTS

Hardware Bag

RPL-F2102-PARTS

#10 x 38mm Pan Head Phillip Screws (2)

#10x76mm Pan Head Phillip Wood Screws (1)

(8)

3/16”( 5.2x8.4x1.0mm) Spring Washer (1)

6.5x19x2mm Flat Washer (1)

5.5x12x1mm Flat Washer (10)

3/16” Star Washer (2)

3/16 *6mm Philip Washer Head Screws (10)

5 x 14 x 1mm Flat Washer (2)

B: Blade Screw / Washers

(Found with the receiver)

5A.

5B.

If you need a replacement UV module - please order part no. UVF7IN-120V-R1-MOD

If you need a replacement tray - please order part no. RPL-F-UV7INTRAY-**

Contact fansupport@modernforms.com if you need glass ﬁxing plates, silicone rings, or hardware

FR-D2102 Ultra Smart Fan Instructions 9

IMPORTANT: Please make note of

the MAC ID on the receiver and

keep it in a safe place.

MAC ID

Hanging Weight: 20 lbs

FR-D2102

Ultra Smart Fan Instructions10

1. Mounting Options

CAUTION: To prevent electrical shock, ensure electricity has been

turned oﬀ at the circuit breaker before beginning.

If there isn’t an existing UL/cUL listed outlet box, please refer to the

following instructions. Secure the outlet box directly to the building

structure. Use appropriate fasteners and building materials. The

outlet box and support structure must be able to fully support the

moving weight of the fan (at least 35 lbs/15.9 kg). Do not use plastic

outlet boxes. Use only UL/cUL listed outlet boxes marked

“FOR FAN SUPPORT.”

Secure the outlet box directly to the building structure. Use Part A (if

needed)

Figures 1-1C are examples of diﬀerent ways to mount the

outlet box.

NOTE: To hang your fan where there is an existing ﬁxture but no

ceiling joist, you may need an installation hanger bar.

NOTE: Downrod fans can be suspended up to a maximum

recommended length of 72” using additional downrods

(sold separately) and the included 80” lead wire.

NOTE: The sloped ceiling kit (sold separately) is required for sloped

ceiling applications, and will accommodate slopes up to 45° (Fig. 1B).

NOTE: You may need a longer downrod to maintain proper blade

clearance when installing on a steep, sloped ceiling (Fig. 1B).

FR-D2102 Ultra Smart Fan Instructions 11

1. Support Brace

2. Outlet Box

3. Joist

1. Support Brace

2. Mounting Bracket

3. Recess Outlet Box

1. Outlet Box

Support Ceiling

Max 30° Angle

FR-D2102

Ultra Smart Fan Instructions12

2. Installing the Mounting Bracket

Remember to disconnect the power at the circuit breaker.

1. Remove 1 of 2 screws from the bottom of the mounting bracket

and save for use in section 11. Loosen the other screw (Fig. 2).

2. Pass the 120-volt supply wires through the center hole in the

mounting bracket as shown (Fig. 2A).

3. Secure the mounting bracket to the ceiling outlet box with the

screws and washers provided with your outlet box.

NOTE: Make sure that mounting screws are tight.

1. Take out the screw located in the hanger ball, lower the hanger

ball and remove the cross pin. Remove the hanger ball from the

hanger ball/downrod assembly. (Fig. 4) You may use the optional

6-inch rod if you prefer. The 10-inch rod is optimal for airflow

production and replacing the UV module in the future.

2. Remove the clevis pin and cotter pin and loosen the two collar

screws from the motor collar.

3. Feed motor wires and safety cable through coupling cover,

canopy ring, and canopy. (Fig 4A)

4. Carefully feed the motor wires and safety cable up through the

downrod. Thread the downrod assembly onto motor collar.

(Fig 4B)

4. Hanging the Fan

1. Secure blade with blade attachment screws and washers.

(Fig. 3) Use part B.

2. Repeat this procedure with the remaining blades.

3. You are ready to hang the fan - the UV Tray/Module comes

pre-assembled to the motor housing. Ref. Part No. 5A/5B.

3. Attaching the Fan Blade

FR-D2102 Ultra Smart Fan Instructions 13

2 2A

3 4

1. Mounting Bracket

2. Screw

To Switch A

(HOT)

(Neutral)

(HOT)/

Switch

(No Neutral)

(Ground)

*Bare or Green

(Ground)

*Bare or Green

To Switch

1. cUL Listed Electrical Box

2. Mounting Screws

(outlet box screws not included)

3. 120V Wires

FR-D2102

Ultra Smart Fan Instructions14

4. Hanging the Fan cont.

5. Align the holes of the downrod and collar and insert the cotter

pin and clevis pin. Tighten the two collar screws. (Fig 4B)

6. Slip the coupling cover, canopy screw ring (painted side down),

and canopy (opened side up) onto the downrod. (Fig. 4B)

7. Reinstall the hanger ball onto the downrod, being sure that the

cross pin is in the correct position and the screw is tightened.

(Fig 4B)

WARNING: Failure to properly install the cotter pin and/or tighten

the set screws could result in the fan loosening and possibly falling.

NOTE: Make sure all screws are tightened and that wires

are not twisted.

8. Carefully lift the fan motor assembly up to the mounting bracket

and seat the hanger ball in the mounting bracket socket. Make

sure the tab on the mounting bracket socket is properly seated

in the groove in the hanger ball. Rotate the socket assembly until

the ball drops and locks into the hanger bracket screw. (Fig. 4C)

9. Secure the safety cable into the structure beams using the wood

screw, washers, and spring washers provided (Fig. 4D).

NOTE: A Safety cable is required for all installations in Canada.

Safety cable is required for ceiling fan and light combinations over

35 lbs. in both flush and downrod models in the United States. Use

Part C.

FR-D2102 Ultra Smart Fan Instructions 15

4A 4B

4D4C

1. Mounting Bracket

2. Screw

3. 120V Wires

4. cUL Listed Electrical Box

5. Mounting plate

6. Mounting screws

7. Safety cable

FR-D2102

Ultra Smart Fan Instructions16

5. Making the Electrical Connections

WARNING: Installation of this fan requires that a three-conductor

cable (including ground wire) which should run between ceiling and

wall outlet box.

WARNING: Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire nuts,

except for the ground wire.

Insert the receiver into the mounting bracket with the flat side of the

receiver facing the ceiling (Fig. 5).

Motor to Receiver & Receiver to house supply wires (Fig. 5A).

1. Connect the hanger ball/downrod assembly ground wire,

mounting bracket ground wire and receiver ground wire to

the ground wire in outlet box

WARNING: Failure to connect ground wires could result in

poor fan control functionality.

2. Connect the red wire from the fan to the red wire marked

“TO MOTOR” from the receiver.

3. Connect the grey wire from the fan to the grey wire marked

“TO MOTOR” from the receiver.

4. Connect the yellow wire from the fan to the yellow wire marked

“TO MOTOR” from the receiver.

5. Connect the white wire from the fan to the white wire marked

“FOR LIGHT” from the receiver.

6. Connect the blue wire from the fan to the blue wire marked

“FOR LIGHT” from the receiver.

7. Connect the black (hot) wire from the ceiling to the black wire

marked “AC in L” from the receiver.

8. Connect the white (neutral) wire from the ceiling to the white

wire marked “AC in N” from the receiver.

NOTE: Please use wire nuts and electrical tape. Failure to make

proper electrical connections may result in damage to the

electronics. Use Part D.

FR-D2102 Ultra Smart Fan Instructions 17

Black(Hot)

can be RED from Switch leg

Black(Line in H)

RED(to Motor)

GREEN(Ground)

BLUE (to Light)

BLUE (for Light)

GREEN(GND Must Use)

GREEN(Hanger Bracket Ground)

RED(to Motor)

GREY(to Motor)

WHITE(Neutral)

WHITE(to Light)

WHITE(Neutral)

Safety Cable

GREY(to Motor)

YELLOW(to Motor)

WHITE(Line in N)

YELLOW(to Motor)

Outlet

Box

Receiver

Hanger Ball & Downrod

Hanger

Bracket

Follow the steps above to connect the fan to your household wiring. Use the plastic wire nuts with your fan.

Secure the plastic wire nuts with electrical tape. Make sure there are no loose strands or connections. Use

Part D.

1. Mounting Bracket

2. Receiver

FR-D2102

Ultra Smart Fan Instructions18

6. Finishing the Installation

1. Secure all wire connections with supplied wire ties to assist in

canopy installation.

2. Tuck connections neatly into ceiling outlet box.

3. Slide the canopy up to hanger bracket and place the key hole on

the canopy over the screw on the hanger bracket. Turn canopy

until it locks in place at the narrow section of the key holes.

(Fig. 6)

4. Align the circular hole on canopy with the remaining hole on the

hanger bracket. Secure by tightening the one screw previously

loosened and the one previously removed. Adjust the canopy

screws as necessary until the canopy and canopy cover are snug.

(Fig. 6)

5. Carefully read and remove the UV Warning sticker from the glass

on top of UV module.

6. Adjust the canopy screws as necessary until the canopy

and canopy screw ring are snug. (Fig. 6)

7. You are now ready to power on your fan and UV. Please follow the

UV Safety Rules before turning on your fan.

WARNING:

This product emits ultraviolet (UV)

radiation. Exposure to UV radiation can cause serious personal

injuries, including damage to eyes and skin. Avoid direct exposure to

the UV light. For more safety instructions, please refer to page 5 of

this instruction manual (“UV Safety Rules”).

NOTE: UV light will not operate independently from fan for safety and

eﬃcacy reasons. The violet indicators will illuminate when the UV light

is enabled. They cannot be turned oﬀ.

WARNING: Make sure tab at bottom of hanger bracket is

properly seated in groove of hanger ball before attaching canopy to

bracket. Failure to properly seat tab in groove could cause damage to

electrical wiring.

FR-D2102 Ultra Smart Fan Instructions 19

FR-D2102

Ultra Smart Fan Instructions20

NOTE: Only remote controls speciﬁcally for the Modern Forms UV smart

fan can be used with this model (F-RCUV-WT). The remote also cannot be

used with other non-UV Modern Forms Fan Your fan was delivered to you

with the included control already paired to your fan.

A: UV light On/Oﬀ

B: Fan On/Oﬀ, Speed Up/Down

C: Season (Summer/Winter)

NOTE: Your fan features 6 speeds. An audible tone will indicate when

the speed is increased or decreased. When the fan has reached the

minimum/maximum speed level the fan will beep twice.

NOTE: Anytime the UV is on the fan will run. When UV is turned oﬀ the

fan will return to the state it was in prior to the module being turned on.

The UV module comes with 3 ultra-violet indicator lights so you know the

UV light is on.

Auto Oﬀ Timer Feature

This feature will automatically turn oﬀ the UV light after a ﬁxed period of

time. Feature is oﬀ by default. To enable/disable, Press and hold and

for 4 seconds. The fan will beep indicating the change.

Default time: 45 minutes. Duration can be changed using the mobile App.

Controlling One or Multiple Fans with Remote

The Bluetooth UV Remote is capable of controlling

an unlimited number of fans within line of site.

See (Fig. 7C) for Pairing.

NOTE: Pairing must be completed within three (3) minutes of

powering the fan.

Synchronizing Control Across Multiple Fans

If you are controlling multiple fans with one controller, fans/lights

may be synced by referring to Fig. 7B and instructions on the next page.

7. Controlling the Fan

La page charge ...

Modern Forms FR-D2102 Ultra Mode d'emploi

Marque: Modern Forms

Modèle: FR-D2102 Ultra

Catégorie: Ventilateurs ménagers

Taper: Mode d'emploi

Ce manuel convient également à

Ultra UV-C Replacement Module

Télécharger le PDF

rapport

dans d''autres langues

English: Modern Forms FR-D2102 Ultra Operating instructions

Modern Forms FR-D2102 Ultra Mode d'emploi

Ce manuel convient également à

Modern Forms FR-D2102 Ultra Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents