EcoFlow Delta Mini Manuel utilisateur

Marque: EcoFlow

Modèle: Delta Mini

Taper: Manuel utilisateur

EcoFlow DELTA mini User Manual

Read all safety tips, warning messages, terms of use, and disclaimers carefully. Refer to the

the product before use. Users take full responsibility for all usage and operations. Familiarize

yourself with the related regulations in your area. You are solely responsible for being aware

of all relevant regulations and using EcoFlow products in a way that is compliant.

DISCLAIMER

EcoFlow DELTA mini (Hereinafter referred to as DELTA mini)

1. Specifications

3.1 Product Details

3.2 LCD Screen

3.3 General Product Usage

3.4 AC Charging

3.5 Solar Charging

3.6 Car Charging

3.7 APP

3.8 X-Boost

3.9 Emergency Power Supply (EPS)

2. Safety Instructions

3. Getting Started

4. FAQS

5. Troubleshooting

6. What’s In the Box

7. Storage & Maintenance

CONTENTS

2.1 Usage

2.2 Disposal Guide

1. Specifications

Input Ports

AC Charge

AC Input Voltage

Solar Charger

Car Charger

X-Stream Fast Charge 900W max, 10A

220-240V~50Hz/60Hz

11-75V 10A Max, 300W max

Supports 12V/24V Battery, Default 8A

Max Device(s) Power Supported by X-Boost

USB-A (x2)

USB-A Fast Charge (x1)

USB-C (x1)

Car Charger

DC5521 Output (x2)

2200W

5V 2.4A, 12W max, per port

5V 2.4A 9V 2A 12V 1.5A 18W Max

5/9/12/15/20V 5A, 100W max

12.6V 10A, 126W max

12.6V 3A, per port

General Info

Output Ports

Net Weight

Dimensions

Capacity

Certification

Wi-Fi

Approximately 11kg

37,0× 18,3× 23,6cm

882Wh, 50.4V

CE WEEE ROHS RCM CTP UCKA

Supported

Battery Info

Cell Chemistry

Shelf Life

Cycle Life

Protection

NCM

1 year (after a full charge)

800 cycles to 80%+ capacity

Over Voltage Protection, Overload Protection,

Over Temperature Protection, Short Circuit

Protection, Low Temperature Protection, Low

Voltage Protection, Overcurrent Protection

* Car charger shares power with the DC5521 output port, offering maximum output of 126W.

AC (x2) Pure Sine Wave, 1400W total (surge 2100W),

230V~ 50Hz/60Hz

Environmental Operating Temperature

Optimal Operating Temperature

Discharge Temperature

Charge Temperature

Storage Temperature

68°F to 86°F(20°C to 30°C)

-4°F to 113°F(-20°C to 45°C)

32°F to 113°F(0°C to 45°C)

-4°F to 113°F (-20°C to 45°C)(optimal: 68°F to

86°F(20°C to 30°C))

* Whether the product can be charged or discharged depends on the actual temperature of the battery pack.

2.2 Disposal Guide

2.1 Usage

1. If conditions permit, make sure that the battery is fully discharged before disposing it in a designated

battery recycling bin. The product contains batteries with potentially dangerous chemicals, so it is

strictly prohibited to dispose of it in ordinary trash cans. For more details, please follow the local laws

and regulations on battery recycling and disposal.

2. If the battery cannot be fully discharged due to a product failure, please do not dispose of the

battery directly in the battery recycling box. In such case, you should contact a professional battery

recycling company for further processing.

3. Please dispose of over-discharged batteries that cannot be recharged.

1. Do not use the product near heat sources, such as a fire source or a heating furnace.

2. Avoid contact with any liquid. Do not immerse the product in water or get it wet. Do not use the

product in rain or humid environments.

3. Do not use the product in an environment with strong static electricity/magnetic fields.

4. Do not disassemble the product in any way or pierce the product with sharp objects.

5. Avoid using wires or other metal objects that may result in a short circuit.

6. Do not use unofficial components or accessories. If you need to replace any components or

accessories, please visit official EcoFlow channels to check relevant information.

7. When using the product, please strictly follow the operating environment temperature specified in

this user manual. If the temperature is too high, it may result in a fire or explosion; if the temperature

is too low, the product performance may be severely reduced, or the product may cease to work.

8. Do not stack any heavy objects on the product.

9. Do not lock the fan forcibly during use or place the product in an unventilated or dusty area.

10. Please avoid impact, falls, or severe vibrations when using the product. In case of a severe external

impact, turn off the power supply immediately and stop using the product. Ensure the product is

well fastened during transportation to avoid vibrations and impacts.

11. If you accidentally drop the product into water during use, please place it in a safe open area, and

stay away from it until it is completely dry. The dried product should not be used again, and should

be properly disposed of according to Section 2.2 below. If the product catches fire, we recommend

that you use the fire extinguishers in the following order: water or water mist, sand, fire blanket, dry

powder, and finally a carbon dioxide fire extinguisher.

12. Use a dry cloth to clean off dirt on the product ports.

13. Rest the product on a flat surface to avoid damages caused by the product falling over. If the

product is overturned and severely damaged, turn it off immediately, place the battery in an open

area, keep it away from combustible matter and people, and dispose of it in accordance with local

laws and regulations.

14. Ensure that the product is kept out of reach of children and pets.

2. Safety Instructions

DC5521 Output Port

USB-C 100W Output Port

LCD Screen

Solar/Car Charging

Input Port

AC Output Socket

(British standard)

AC Power Button

Car Outlet

IOT Button

USB-A Output Port

USB-A Fast Charge

Output Port

X-Stream AC Charging

Input Port

Overload Protection

Switch

12V DC Power Button

Australian

standard

*AC socket adapts according to local standards.

European

standard

lnternational

standard

Main Power Button

3. Getting Started

3.1 Product Details

Ventilation Fan

AC Charge Speed Switch

Short press the Main Power Button to turn on the product; the LCD Screen will light up and the

battery level indicator icon will display.

Product On, Product Off, LCD Screen On

Remaining Charge/

Discharge Time

Output Power

Overload Warning

Input Power

Fan Indicator

Low Temperature Warning

High Temperature Warning

Remaining Battery Percentage

Battery Failure Warning

Battery Level Indicator

AC Output

Short Press to Turn On

USB-A/USB-C

Output Wi-Fi Status

12V DC Output Indicator

Battery Level Indicator: The indicator will repeatedly fill while charging. If product is at 0% charge, the

indicator will flash to warn you.

Wi-Fi Status: After pressing the IOT button for 3 seconds, the Wi-Fi status will flash on the LCD screen

which indicates that the product is ready for pairing. There're two ways to connect the product with

the App, either directly connect to the product's hotspot or using the Internet. If the App is successfully

connected to the product's hotspot, the icon will keep flashing; if it is successfully connected to the

Internet, the icon will stay on.

State of Charge

The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically

turn off. When the product senses any load change or operations, the LCD Screen will automatically

light up. To turn the LCD Screen on or off, please short press the Main Power Button.

To power off the product, press and hold the Main Power Button.

The default product standby time is 2 hours. With other Power Buttons turned off and no other load

access for 2 hours, the product will automatically shut down. The standby time can be set on the App.

Long Press to Turn Off

3.2 LCD Screen

3.3 General Product Usage

* See Section 5 for more troubleshooting steps.

With the Main Power Button turned on, short press the 12V

DC Power Button to use the DC Output port. Short press

the 12V DC Power Button again to turn it off.

With the 12V DC Power Button on, the product will not

automatically shut down.

12V DC Output Port

With the Main Power Button turned on, short press the AC

Power Button to use the AC Output ports. Short press the

AC Power Button again to turn it off.

The default standby time of the AC Output port is 12 hours.

Without any load access for 12 hours, the AC Power will

automatically turn off.

Please turn off AC power button when not in use to save

power consumption.

AC Output Port

Short Press

12V DC Power Button

Short Press

AC Power Button

EcoFlow’s X-Stream fast charge technology is specifically for AC charging, offering 900W of max

input power. You can control the charging power through the AC Charge Speed Switch. When set

to the top, you will have a charging speed of 900W. When set to the bottom it'll be at your custom

speed, which is 200W by default, customizable in the EcoFlow app. In case of unusual situations

where the AC input current remains higher than 20A, the X-Stream charging input port will initiate

a self-protection function, and the Overload Protection Switch on the product will automatically

pop up. After confirming that there is no product failure, you can press the Overload Protection

Switch to resume charging.

The charging power can be adjusted through the AC Charge Speed Switch on the back of the

product. You can set the charging power range in the EcoFlow App.

Please use AC charging Cable for fast charging. EcoFlow takes no responsibilities for any consequences

caused by failures to follow instructions, including but not limited to charging with AC charging Cable.

X-Stream Fast Charging

900W Max input Power

EcoFlow APP

Customized Charging Power

Range: 200-900W

(Default : 200W)

<2 hrs Full Charge

AC Charging

Cable

3.4 AC Charging

English editi on

X-Stream Fast Charging

900W Max input Power

Users can connect solar panels in series as shown in the figure to recharge the product. The product

supports 11-75V DC input, 10A max current, and 300W max charging power.

MC4

Solar Charging Cable

Car Charging Cable

When using an EcoFlow solar panel to charge the product, please follow the instructions that come

with the solar panel.

Before connecting the solar panel, please ensure that the solar panel’s output voltage is within 75V

to avoid product damages.

Users can recharge the product through the Car Charging Input Port. It supports 12V/24V car

chargers and an 8A default charging current.

Please charge using the car charger after you’ve started the car to avoid failure to start due to

insufficient car battery. In addition, please make sure that Car Charging Input Port and the Car

Charging Cable are in good condition. EcoFlow takes no responsibilities for any losses or damages

caused by failures to follow instructions.

3.5 Solar Charging

3.6 Car Charging

With EcoFlow X-Boost technology, the product can power a 2200W Max device while the rated

output power remains 1400W, avoiding operation failure due to overload protection.

Under standard voltage conditions, the total maximum output of all AC output ports is 1400W.

With the X-Boost enabled, all AC output ports can power devices that require 2200W Max in total

while the rated output power remains 1400W. The X-Boost will be automatically enabled when the

total output of all output ports exceeds 1400W.

X-Boost Tips:

1. X-Boost is enabled by default; you can enable or disable it in the EcoFlow App.

2. X-Boost is not available when the AC output is turned on in a recharging state (in bypass mode)

and when X-Boost is disabled.

3. X-Boost is not applicable for all electrical appliances; it’s incompatible with appliances with strict

voltage requirements. Appliances with voltage protection (such as precise instruments) are not

supported. X-Boost mode is more suitable for heating devices. Please conduct your own tests with

your devices with X-Boost enabled.

3.7 APP

3.8 X-Boost

The EcoFlow App gives users the ability to control and monitor EcoFlow

power stations remotely.

Read the EcoFlow App user guide and access the download link here:

https://ecoflow.com/pages/ecoflow-app.

By using EcoFlow Products, Applications and Services, you consent to

the EcoFlow Term of Use and Privacy Policy, which you can access via the

"About" section of the "User" page on the EcoFlow App or on the official

EcoFlow website at https://ecoflow.com/pages/terms-of-use and https://

ecoflow.com/pages/privacy-policy.

4. FAQS

The product supports EPS. When you connect the grid power to the AC Input Port of the product

through an AC Charging cable, you can power electrical devices through the AC Output Sockets (AC

power will come from the grid and not the power station in this situation). In case of a sudden blackout,

the product can automatically switch to the battery powered supply mode within 30ms. As a basic

UPS function, this function does not support 0ms switching. Please do not connect the product to

any device that requires 0ms UPS, such as data servers and workstations. Please test and confirm

the compatibility before using the product. We recommend that you only charge one device at a

time and avoid using multiple ones at the same time to avoid overload protection. EcoFlow takes no

responsibilities for any device failures or data losses caused by failures to follow instructions.

1. What battery does the product use?

It uses high-quality lithium-ion battery.

2. What devices can the product’s AC output port power?

With 1400W rated power and 2100W peak power, the product’s AC output port can power

most household appliances. Before you use it, we recommend that you confirm the power of the

appliances first and ensure the power sum of all loaded appliances is lower than the rated power.

3. How long can the product charge my devices?

The charging time is shown on the product’s LCD Screen, which can be used to estimate the

charging time of most appliances with stable power usage.

4. How can I know if the product is charging?

When it’s charging, the remaining charging time will be shown on the LCD Screen. Meanwhile, the

charging indicator icon begins to rotate with the remaining battery percentage and the input

power shown on the right of the circle.

5. How to clean the product?

Please gently wipe it with a dry, soft, clean cloth or paper towel.

6. How to store the product?

Before storing, please turn off the product first, and then store it in a dry, ventilated place at room

temperature. Do not place it near water sources. For long-term storage, please discharge the

battery to 30% and recharge it to 60% every three months to extend its battery life.

7. Can I bring the product on a plane?

No.

3.9 Emergency Power Supply (EPS)

5. Troubleshooting

If an errors (s) is indicated on the LCD screen during use and does not disappear after a restart,

please stop using it immediately (do not try to charge or discharge).

If you require any other assitance, please contact EcoFlow Customer Service.

Indicator Problem

USB-A Overload

Protection

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icons Flash

together

Icon Stays On

Resume normal operation by

removing the electrical device

connected to the USB-A port.

Resume normal operation by

removing the electrical device

connected to the USB-C port.

After the product cools down,

it will resume normal operation

automatically.

Charging can be resumed

automatically after the battery cools

down.

The power supply can be resumed

automatically after the battery cools down.

Charging can be resumed

automatically after battery

temperature rises above 41°F.

The power supply can be resumed

automatically after the battery

temperature rises above 10°F.

Please confirm whether the fan inlet

and outlet are blocked, if not, normal

operation will be resumed automatically

after the product temperature drops.

Normal operation will be resumed

automatically after the product is

used at optimum environmental

temperatures.

Please check if the fan is blocked by

foreign materials.

After the product cools down,

it will resume normal operation

automatically.

Contact EcoFlow Customer Service

Normal operation will be resumed

automatically after you remove the

overloaded device and restart the

product.

Electrical appliances should be used

within rated power.

(Refer to X-Boost instructions

to get more details about power

limitations).

USB-C Overload

Protection

Solution

USB-C High

Temperature Protection

High Temperature

Charge Protection

High Temperature

Discharge Protection

Low Temperature

Charge Protection

Low Temperature

Discharge Protection

AC Output

Overload Protection

AC High

Temperature Protection

AC Low

Temperature Protection

Fan Blockage

Car Charger

Overload Protection

Car Charger High

Temperature Protection

Battery Failure

The product will resume normal

operation automatically after you remove

the device connected to the car charger.

Icon Flashes

6. What’s In the Box

7. Storage & Maintenance

DELTA mini Solar Charging Cable

DC5521 to DC5525 Cable User Manual &

Warranty Card

Car Charging CableAC Charging Cable

1. Please use or store the product in an environment temperature between 68°F to 86°F, away from

water, heat, and other metal objects.

2. For long-term storage, please discharge the battery to 30% and recharge it to 60% every three

months.

3. For safety, please do not store the product in an environment temperature higher than 113°F or

lower than 14°F for a long time.

4. If the remaining battery is less than 1% after you finish using the product, please recharge it to

60% before storing. If the product is left idle for a long time with severely low battery, irreversible

damages may be caused to the battery cell and the product service life will be shortened.

5. If the product has been idle for too long and the battery is severely low, it will enter a deep sleep

protection mode. In such case, please charge the product before using it again.

EcoFlow DELTA mini Benutzerhandbuch

Lesen Sie alle Sicherheits- und Warnhinweise, Nutzungsbedingungen und Haftungsausschlüsse

sorgfältig durch. Lesen Sie vor der Verwendung die Nutzungsbedingungen und den Haftungsausschluss

unter https://ecoﬂow.com/pages/terms-of-use sowie die Aufkleber auf dem Produkt. Benutzer

übernehmen die volle Verantwortung für Verwendung und Betrieb des Produkts. Machen Sie sich

mit den entsprechenden Vorschriften in Ihrem Land vertraut. Sie sind allein dafür verantwortlich, alle

relevanten Vorschriften zu kennen und EcoFlow-Produkte gemäß dieser Vorschriften zu verwenden.

HAFTUNGSAUSSCHLUSS

EcoFlow DELTA mini (im Folgenden DELTA mini genannt)

1. Spezifikationen

3.1 Produktdetails

3.2 LCD-Anzeige

3.3 Allgemeine Betriebsanweisungen

3.4 AC-Ladung

3.5 Solarladung

3.6 Kfz-Ladung

3.7 App

3.8 X-Boost

3.9 Notstromversorgung

2. Sicherheitshinweise

3. Erste Schritte

4. FAQ-Bereich

5. Fehlerbehebung

6. Lieferumfang

7. Lagerung und Wartung

INHALT

2.1 Verwendung

2.2 Sachgemäße Entsorgung

1. Spezifikationen

Eingänge

AC-Ladung

AC-Eingangsspannung

Solarladegerät

Kfz-Ladegerät

X-Stream-Schnellladung max. 900W, 10A

220–240V~50/60Hz

11–75V max. 10A, max. 300W

Unterstützt 12-/24-V-Akku, Standard 8A

Max. von X-Boost unterstützte Geräteleistung

USB-A (x2)

USB-A-Schnellladung (x1)

USB-C (x1)

Kfz-Ladegerät

DC5521-Ausgang (x2)

2200W

5V 2,4A, max. 12W, pro Anschluss

5V 2,4A 9V 2A 12V 1,5A max. 18W

5/9/12/15/20V 5A, max. 100W

12,6V 10A, max. 126W

12,6V 3A, pro Anschluss

Allgemeine Informationen

Ausgänge

Nettogewicht

Abmessungen

Kapazität

Zertifizierung

WLAN

Etwa 11kg

37,0× 18,3× 23,6cm

882Wh, 50,4V

CE WEEE ROHS RCM CTP UCKA

Unterstützt

Informationen zum Akku

Zellenchemie

Lagerung

Lebensdauer

Schutz

NCM

1 Jahr (nach vollständiger Aufladung)

800 Zyklen bis 80%+ Kapazität

Überspannungsschutz, Überlastschutz,

Übertemperaturschutz, Kurzschlussschutz,

Niedertemperaturschutz,

Niederspannungsschutz, Überstromschutz

* Das Kfz-Ladegerät teilt die Leistung mit dem DC5521-Ausgang und bietet eine maximale Leistung von 126W.

AC (x2) Reine Sinuswelle, 1400W insgesamt

(Überspannung 2100W), 230V~ (50 Hz)

Umgebungsbetriebstemperatur

Optimale Betriebstemperatur

Entladetemperatur

Ladetemperatur

Lagertemperatur

68°F bis 86°F (20°C bis 30°C)

-4°F bis 113°F (-20°C bis 45°C)

32°F bis 113°F (0°C bis 45°C)

-4°F bis 113°F (-20°C bis 45°C) (optimal: 68°F

bis 86°F [20°C bis 30°C])

* Ob das Produkt geladen oder entladen werden kann, hängt von der tatsächlichen Temperatur des Akkus ab.

2.2 Sachgemäße Entsorgung

2.1 Verwendung

1. Wenn die Bedingungen es zulassen, stellen Sie sicher, dass der Akku vollständig entladen ist, bevor

Sie ihn der dafür vorgesehenen Batterie-Recyclingmöglichkeit zuführen. Das Produkt enthält Akkus

mit potenziell gefährlichen Chemikalien. Daher ist es strengstens untersagt, diese in normalen

Abfallbehältern zu entsorgen. Für weitere Informationen befolgen Sie bitte die lokalen Gesetze und

Vorschriften zum Recycling und zur Entsorgung von Akkus.

2. Wenn der Akku aufgrund eines Produktfehlers nicht vollständig entladen werden kann, entsorgen Sie

ihn nicht direkt im Batterie-Recycling. In diesem Fall sollten Sie sich zum weiteren Vorgehen an ein

professionelles Recycling-Unternehmen wenden.

3. Bitte entsorgen Sie Akkus, die eine Tiefenentladung aufweisen und nicht wieder aufgeladen werden

können.

1. Verwenden Sie das Produkt nicht in der Nähe einer Wärmequelle, z.B. eines offenen Feuers oder

Heizofens.

2. Kontakt mit Flüssigkeiten vermeiden. Tauchen Sie das Produkt nicht in Wasser und lassen Sie es

nicht nass werden. Verwenden Sie das Gerät nicht im Regen oder in feuchten Umgebungen.

3. Verwenden Sie das Produkt nicht in einer Umgebung mit starker statischer Elektrizität/

Magnetfeldern.

4. Bauen Sie das Produkt nicht auseinander und durchstechen Sie es nicht mit spitzen Gegenständen.

5. Vermeiden Sie die Verwendung von Drähten oder anderen Metallobjekten, die zu einem Kurzschluss

führen können.

6. Verwenden Sie nur Originalkomponenten oder -zubehörteile. Wenn Sie Komponenten oder Zubehör

austauschen müssen, besuchen Sie bitte für alle relevanten Informationen die offiziellen EcoFlow-Kanäle.

7. Beachten Sie bei der Verwendung des Produkts unbedingt die in dieser Bedienungsanleitung

angegebene Umgebungstemperatur. Wenn die Temperatur zu hoch ist, kann dies zu einem Brand

oder einer Explosion führen. Wenn die Temperatur zu niedrig ist, kann das die Leistung des Produkts

stark beeinträchtigen oder zu Ausfällen führen.

8. Stellen Sie keine schweren Gegenstände auf das Gerät.

9. Verriegeln Sie den Lüfter während des Gebrauchs nicht mit Gewalt und stellen Sie das Gerät nicht an

unbelüfteten oder staubigen Orten ab.

10. Vermeiden Sie Schläge, Stürze und starke Vibrationen bei der Verwendung des Produkts. Schalten

Sie im Fall eines schweren Schlags auf das Produkt sofort die Stromversorgung aus und verwenden

Sie das Gerät nicht weiter. Stellen Sie sicher, dass das Produkt während des Transports gut gesichert

ist, um Vibrationen und Stöße zu vermeiden.

11. Wenn Sie das Produkt während des Gebrauchs versehentlich in Wasser fallen lassen, legen Sie

es an einen sicheren, offenen Ort und lassen Sie es vollständig trocknen, ohne erneut damit in

Kontakt zu kommen. Das getrocknete Produkt darf nicht mehr verwendet werden und muss gemäß

Abschnitt 2.2 ordnungsgemäß entsorgt werden. Wenn das Produkt Feuer fängt, empfehlen wir,

die Feuerlöscher in der folgenden Reihenfolge zu verwenden: Wasser oder Wassernebel, Sand,

Feuerdecke, Trockenpulver und schließlich einen Kohlendioxid-Feuerlöscher.

12. Entfernen Sie Schmutz an den Anschlüssen des Produkts mit einem trockenen Tuch.

13. Stellen Sie das Gerät auf eine ebene Oberfläche, um Schäden durch etwaiges Umstürzen zu

vermeiden. Wenn das Produkt gestürzt ist und stark beschädigt wurde, schalten Sie es sofort aus,

stellen Sie den Akku in einen offenen Bereich, halten Sie ihn von brennbaren Materialien sowie

Personen fern und entsorgen Sie ihn gemäß den örtlichen Gesetzen und Vorschriften.

14. Stellen Sie sicher, dass das Produkt außerhalb der Reichweite von Kindern und Haustieren

aufbewahrt wird.

2. Sicherheitshinweise

DC5521-Ausgang

USB-C-Ausgang 100W

LCD-Anzeige

Solar-/Kfz-Ladeanschluss

AC-Ausgänge

AC-Netzschalter

Kfz-Ausgang

IOT-Taste

USB-A-Ausgang

USB-A-Schnelllade-

Ausgang

X-Stream-AC-

Ladeeingang

Überlastschutzschalter

12-VDC-Netzschalter

Netzschalter

3. Erste Schritte

3.1 Produktdetails

Lüfter

AC-Ladegeschwindigkeitsschalter

La page charge ...

EcoFlow Delta Mini Manuel utilisateur

Marque: EcoFlow

Modèle: Delta Mini

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

italiano: EcoFlow Delta Mini Manuale utente
español: EcoFlow Delta Mini Manual de usuario
Deutsch: EcoFlow Delta Mini Benutzerhandbuch
Nederlands: EcoFlow Delta Mini Handleiding

Documents connexes

Autres documents

BlitzWolf BW-PG4 Manuel utilisateur